Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Products And Systems For The Protection And Repair Of Concrete Structures Definitions Requirements Quality Control And Evaluation Of Conformity Anchoring Of Reinforcing Steel Bar
Download Products And Systems For The Protection And Repair Of Concrete Structures Definitions Requirements Quality Control And Evaluation Of Conformity Anchoring Of Reinforcing Steel Bar full books in PDF, epub, and Kindle. Read online Products And Systems For The Protection And Repair Of Concrete Structures Definitions Requirements Quality Control And Evaluation Of Conformity Anchoring Of Reinforcing Steel Bar ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Concrete Repair, Rehabilitation and Retrofitting by : M. Alexander
Download or read book Concrete Repair, Rehabilitation and Retrofitting written by M. Alexander and published by CRC PressI Llc. This book was released on 2006-01-01 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2005) was held in Cape Town, South Africa, in November 2005. The conference was a collaborative venture by researchers from the South African Research Programme in Concrete Materials (based at the Universities of Cape Town and The Witwatersrand) and The Construction Materials Section at Leipzig University in Germany. The conference focused on appropriate repairing, maintaining, rehabilitating, and, if necessary, retrofitting existing infrastructure with a view to extending its life and maximising its economic return.
Book Synopsis Failure, Distress and Repair of Concrete Structures by : Norb Delatte
Download or read book Failure, Distress and Repair of Concrete Structures written by Norb Delatte and published by Elsevier. This book was released on 2009-10-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and recognising failure mechanisms in concrete is a fundamental pre-requisite to determining the type of repair, or whether a repair is feasible. This title provides a review of concrete deterioration and damage, as well as looking at the problem of defects in concrete. It also discusses condition assessment and repair techniques.Part one discusses failure mechanisms in concrete and covers topics such as causes and mechanisms of deterioration in reinforced concrete, types of damage in concrete structures, types and causes of cracking and condition assessment of concrete structures. Part two reviews the repair of concrete structures with coverage of themes such as standards and guidelines for repairing concrete structures, methods of crack repair, repair materials, bonded concrete overlays, repairing and retrofitting concrete structures with fiber-reinforced polymers, patching deteriorated concrete structures and durability of repaired concrete.With its distinguished editor and international team of contributors, Failure and repair of concrete structures is a standard reference for civil engineers, architects and anyone working in the construction sector, as well as those concerned with ensuring the safety of concrete structures. - Provides a review of concrete deterioration and damage - Discusses condition assessment and repair techniques, standards and guidelines
Book Synopsis Concrete Repair to EN 1504 by : Michael Raupach
Download or read book Concrete Repair to EN 1504 written by Michael Raupach and published by CRC Press. This book was released on 2014-05-15 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Construction Sector Is Increasingly Focused On Repair As concrete structures are maintained longer for both environmental and financial reasons, the diagnosis, design, and selection of products, and repair work all depend on the individual condition of the buildings and require specialist knowledge from everyone involved. Concrete Repair to EN 1504: Diagnosis, Design, Principles and Practice provides relevant background and practical guidance on concrete repair. This book is based on the new European Standard EN 1504, which is used as the actual basis for concrete repair works, in Europe and beyond. Offers a Systematic and Thorough Approach It includes both practice and theory, and provides an ideal basis for understanding and designing repair works. It addresses building materials, deterioration mechanisms, diagnosis, load-bearing capacity and safety, repair principles and methods, repair materials, execution of repair works, quality control, inspections, monitoring, and maintenance and building management systems right through to building regulations and standards. It also covers deterioration mechanisms of concrete and steel reinforcement, diagnosis methods, principles of repair and protection, properties and fields of application of repair materials, as well as methods of execution, including quality control to EN 1504. Describes the theoretical background of corrosion and diagnosis methods (which are not covered by the EN 1504 series) Provides the systematics of principles and methods in detail Includes dedicated comprehensions which enables the reader to quickly access the knowledge The text provides a complete overview and is a practical resource for owners, designers, product suppliers, testing institutes, and consulting engineers, as well as for students in civil engineering.
Book Synopsis Eco-efficient Repair and Rehabilitation of Concrete Infrastructures by : Fernando Pacheco-Torgal
Download or read book Eco-efficient Repair and Rehabilitation of Concrete Infrastructures written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2024-03-13 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Repair and Rehabilitation of Concrete Infrastructures, Second Edition provides an updated state-of-the-art review on the latest advances in this important research field. The first section is brought fully up-to-date and focuses on deterioration assessment methods. Section two contains brand new chapters on innovative concrete repair and rehabilitation materials including: fly ash-based alkali-activated repair materials for concrete exposed to aggressive environments; repairing concrete structures with alkali-activated metakaolin mortars; concrete with micro encapsulated self-healing materials; concrete repaired with bacteria; concrete structures repaired with engineered cementitious composites; concrete repaired by electrodeposition; the assessment of concrete after repair operations and durability of concrete repair. The final section has also been amended to include six new chapters on design, Life-cycle cost analysis and life-cycle assessment. These chapters include maintenance strategies for concrete structures; a comparison of different repair methods; life cycle assessment of the effects of climate change on bridge deterioration; life-cycle-cost benefits of cathodic protection of concrete structures; life-cycle cost analyses for concrete bridges exposed to chlorides and life-cycle analysis of repair of concrete pavements. The book will be an essential reference resource for materials scientists, civil and structural engineers, architects, structural designers and contractors working in the construction industry. - Presents the latest research findings on eco-efficient repair and rehabilitation of concrete infrastructures - Provides comprehensive coverage from damage detection and assessment, to repair strategies, and structural health monitoring - Diverse author base offering insights on construction practice and employed technologies worldwide - Includes a section on innovative repair and rehabilitation materials, as well as case studies on life cycle cost analysis and LCA
Book Synopsis Concrete Solutions by : Michael Grantham
Download or read book Concrete Solutions written by Michael Grantham and published by CRC Press. This book was released on 2009-06-10 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete repair continues to be a subject of major interest to engineers and technologists worldwide. The concrete repair budget for the UK alone currently runs at some UKP 220 per annum. Some estimates have indicated that, worldwide, in 2010 the expenditure for maintenance and repair work will represent about 85% of the total expenditure in the co
Book Synopsis Civil Engineering Structures According to the Eurocodes by : Xavier Lauzin
Download or read book Civil Engineering Structures According to the Eurocodes written by Xavier Lauzin and published by John Wiley & Sons. This book was released on 2017-07-19 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This standard assumes that the structure, after completion, is used as intended in the project and subject to planned inspection and maintenance to meet the expected project lifetime and to detect any unforeseen weakness or behavior" (EN 13670 §4.1) An important decision factor in the design of new structures and repairs to existing structures is the lifetime or expected service life. This concept, which is common for civil engineering works, has been extended to all engineering and building works by applying the European Structural Design Codes. This book tries to take stock of the inspection methodologies related to each type of civil engineering work, the various pathologies of concrete structures, and gives examples of the writing of reports.
Book Synopsis A State-of-the-Art Guide for Post-Installed Reinforcement by : Daniel TW Looi
Download or read book A State-of-the-Art Guide for Post-Installed Reinforcement written by Daniel TW Looi and published by Sunway University Press. This book was released on 2022-07-22 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: A State-of-the-Art Guide for Post-Installed Reinforcement provides comprehensive coverage on installation, design, and assessment guidelines for post-installed reinforcements, a unique technology used very commonly in the construction industry. Previously published in Hong Kong, this Malaysian edition includes new EOTA technical reports and European Assessment Documents, fundamentals for post-installed reinforcements, design proposals, as well as unique design examples, all of which is specifically tailored for the Malaysian context.
Book Synopsis Corrosion of Steel in Concrete by : John P. Broomfield
Download or read book Corrosion of Steel in Concrete written by John P. Broomfield and published by CRC Press. This book was released on 2023-01-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Steel in Concrete: Understanding, Investigation and Repair is a guide for designing, constructing and maintaining reinforced concrete structures, such as buildings and bridges which are subject to reinforcement corrosion. It presents the basics of theory and practice in steel corrosion in concrete and reviews the latest research and developments, such as progress on measuring the corrosion threshold for chloride-induced corrosion. This third edition compares the currently proliferating major national and international standards and guidance documents. New developments are considered, such as hybrid anodes for electrochemical treatment and the latest research and developments in assessment, such as the use of ground penetrating radar to measure the chloride content of the concrete cover. It overhauls coverage of electrochemical repair and rehabilitation techniques and outlines recent innovations in structural repair and construction and investigates their implications for durability. The book is ideal for practitioners and graduate students in structural engineering and concrete technology.
Book Synopsis Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications by : Jiping Bai
Download or read book Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications written by Jiping Bai and published by Woodhead Publishing. This book was released on 2022-12-05 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fibre-reinforced Polymer (FRP) Composites for Structural Applications, Second Edition provides updates on new research that has been carried out on the use of FRP composites for structural applications. These include the further development of advanced FRP composites materials that achieve lighter and stronger FRP composites, how to enhance FRP integrated behavior through matrix modification, along with information on pretension treatments and intelligence technology. The development of new technology such as automated manufacturing and processing of fiber-reinforced polymer (FRP) composites have played a significant role in optimizing fabrication processing and matrix formation. In this new edition, all chapters have been brought fully up-to-date to take on the key aspects mentioned above. The book's chapters cover all areas relevant to advanced FRP composites, from the material itself, its manufacturing, properties, testing and applications in structural and civil engineering. Applications span from civil engineering, to buildings and the energy industry. - Covers all areas relevant to advanced FRP composites, from the material itself, its manufacturing, properties, testing and applications in structural engineering - Features new manufacturing techniques, such as automated fiber placement and 3D printing of composites - Includes various applications, such as prestressed-FRP, FRP made of short fibers, continuous structural health monitoring using advanced optical fiber Bragg grating (FBG), durability of FRP-strengthened structures, and the application of carbon nano-tubes or platelets for enhancing durability of FRP-bonded structures
Book Synopsis Case Studies of Rehabilitation, Repair, Retrofitting, and Strengthening of Structures by : Mourad M. Bakhoum
Download or read book Case Studies of Rehabilitation, Repair, Retrofitting, and Strengthening of Structures written by Mourad M. Bakhoum and published by IABSE. This book was released on 2010 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :2883941025 Total Pages :482 pages Book Rating :4.8/5 (839 download)
Book Synopsis Structural Concrete Textbook, Volume 5 by : fib Fédération internationale du béton
Download or read book Structural Concrete Textbook, Volume 5 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-06-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.
Book Synopsis Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World by : Georgios Anagnostou
Download or read book Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World written by Georgios Anagnostou and published by CRC Press. This book was released on 2023-04-12 with total page 3529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World contains the contributions presented at the ITA-AITES World Tunnel Congress 2023 (Athens, Greece, 12 – 18 May, 2023). Tunnels and underground space are a predominant engineering practice that can provide sustainable, cost-efficient and environmentally friendly solutions to the ever-growing needs of modern societies. This underground expansion in more diverse and challenging infrastructure types or to novel underground uses can foster the changes needed. At the same time, the tunneling and underground space community needs to be better prepared and equipped with knowledge, tools and experience, to deal with the prevailing conditions, to successfully challenge and overcome adversities on this path. The papers in this book aim at contributing to the analysis of challenging conditions, the presentation and dissemination good practices, the introduction of new concepts, new tools and innovative elements that can help engineers and all stakeholders to reach their end goals. Expanding Underground - Knowledge and Passion to Make a Positive Impact on the World covers a wide range of aspects and topics related to the whole chain of the construction and operation of underground structures: Knowledge and Passion to Expand Underground for Sustainability and Resilience Geological, Geotechnical Site Investigation and Ground Characterization Planning and Designing of Tunnels and Underground Structures Mechanised Tunnelling and Microtunnelling Conventional Tunnelling, Drill-and-Blast Applications Tunnelling in Challenging Conditions - Case Histories and Lessons Learned Innovation, Robotics and Automation BIM, Big Data and Machine Learning Applications in Tunnelling Safety, Risk and Operation of Underground Infrastructure, and Contractual Practices, Insurance and Project Management The book is a must-have reference for all professionals and stakeholders involved in tunneling and underground space development projects.
Book Synopsis Materials for Construction and Civil Engineering by : M. Clara Gonçalves
Download or read book Materials for Construction and Civil Engineering written by M. Clara Gonçalves and published by Springer. This book was released on 2015-03-03 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: · Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure · Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes · Addresses topics important to professionals working with structural materials, such as corrosion, nanomaterials, materials life cycle, not often covered outside of journal literature · Diverse author team presents expect perspective from civil engineering, construction, and architecture · Features a detailed glossary of terms and over 400 illustrations
Book Synopsis Structural Renovation in Concrete by : Zongjin Li
Download or read book Structural Renovation in Concrete written by Zongjin Li and published by CRC Press. This book was released on 2009-02-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanisms by which buildings and infrastructures degrade are complex, as are the procedures and methods for inspection and for rehabilitation. This book examines the various problems caused by non-uniform deformation changes, poor durability, and natural and human disasters such as earthquakes and fire. Attention is given to the causes and mechanisms of the deterioration. General procedures and commonly used techniques for inspection and evaluation of existing infrastructures are introduced. The desk study, destructive test, and non-destructive test are discussed – in particular the newly developed non-destructive methods for deterioration monitoring. The book then moves on to conventional renovation techniques such as patch and steel plate strengthening, which meet the requirements of normal practice. Special attention is paid to compatibility between repair materials and degraded materials. Fibrous composite materials are then introduced as a basis for innovative repair techniques, and different fibre and matrix properties are outlined, as are newly developed inorganic binders as a matrix for fibrous composites. Finally, advanced rehabilitation techniques using fibrous composite are described. Fundamental issues such as bonding and failure mechanisms are then discussed in detail. Fibrous composite strengthening techniques for beam, wall, column and slabs are covered, including shear strengthening, flexural strengthening, and fillet winding, as are codes of practice for retrofitting with fibrous composites. This caters to students and academics world-wide and serves as a "tool book" for concrete and structural engineering professionals.
Author :FIB – International Federation for Structural Concrete Publisher :FIB - International Federation for Structural Concrete ISBN 13 :2883941572 Total Pages :338 pages Book Rating :4.8/5 (839 download)
Book Synopsis Guide for Strengthening of Concrete Structures by : FIB – International Federation for Structural Concrete
Download or read book Guide for Strengthening of Concrete Structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2022-05-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of preparing a technical document for the repairs and interventions upon concrete structures goes back to the former fib COM 5: Structural Service Life Aspects, being the goal of the then TG 5.9. After a long period of reduced activity, and taking into account the reorganization of fib commissions that meanwhile took place, on June 2017 a different approach was proposed to push forward the task of TG 8.1 (formerly TG 5.9). The (new) goal of TG 8.1 was to deliver a ‘how-to-do’ guide, gathering together protection, repair, and strengthening techniques for concrete structures. Chapters are intended to provide both guidelines and case-studies, serving as support to the application of fib MC 2020 pre-normative specifications. Each chapter was written by an editorial team comprising desirably at least a researcher, a designer and a contractor. Templates have been prepared in order to harmonize the contents and the presentation of the different methods. Following the writing process, chapters were reviewed by experts and, after amendments by the authors, they underwent a second review process by COM 8 and TG 3.4 members, as well as by different practitioners. For each protection, repair and strengthening method addressed in this guide, readers have a description of when to adopt it, which materials and systems are required, which techniques are available, and what kind of equipment is needed. It then presents a summary of stakeholders’ roles and qualifications, design guidelines referring to most relevant codes and references, the intervention procedure, quality control measures and monitoring and maintenance activities. Due to the extent of the guide, it was decided to publish it as bulletin 102, addressing protection and repair methods, and bulletin 103, addressing strengthening methods. We would like to thank the authors, reviewers and members of COM 8 and TG 3.4 for their work in developing this fib Bulletin, which we hope will be useful for professionals working in the field of existing concrete structures, especially those concerned with life-cycle management and conservation activities. As noted above, this Bulletin is also intended to act as a background and supporting document to the next edition of the fib Model Code for Concrete Structures, which is currently under development under the auspices of TG10.1 with the working title of ‘fib Model Code 2020’.
Book Synopsis Alkali-Aggregate Reaction in Concrete by : Ian Sims
Download or read book Alkali-Aggregate Reaction in Concrete written by Ian Sims and published by CRC Press. This book was released on 2017-08-01 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alkali-Aggregate Reaction in Concrete: A World Review is unique in providing authoritative and up to date expert information on the causes and effects of Alkali-Aggregate Reaction (AAR) in concrete structures worldwide. In 1992 a first edition entitled The Alkali-Silica Reaction in Concrete, edited by Professor Narayan Swamy, was published in a first attempt to cover this concrete problem from a global perspective, but the coverage was incomplete. This completely new edition offers a fully updated and more universal coverage of the world situation concerning AAR and includes a wealth of new evidence and research information that has accumulated in the intervening years. Although there are various textbooks offering readers sections that deal with AAR deterioration and damage to concrete, no other single book brings together the views of recognised international experts in the field, and the wealth of scattered research information that is available. It provides a ‘state of the art’ review and deals authoritatively with the mechanisms of AAR, its diagnosis and how to treat concrete affected by AAR. It is illustrated by numerous actual examples from around the world, and comprises specialist contributions provided by senior engineers and scientists from many parts of the world. The book is divided into two distinct but complementary parts. The first five chapters deal with the most recent findings concerning the mechanisms involved in the reaction, methods concerning its diagnosis, testing and evaluation, together with an appraisal of current methods used in its avoidance and in the remediation of affected concrete structures. The second part is divided into eleven chapters covering each region of the world in turn. These chapters have been written by experts with specialist knowledge of AAR in the countries involved and include an authoritative appraisal of the problem and its solution as it affects concrete structures in the region. Such an authoritative compilation of information on AAR has not been attempted previously on this scale and this work is therefore an essential source for practising and research civil engineers, consultant engineers and materials scientists, as well as aggregate and cement producers, designers and concrete suppliers, especially regarding projects outside their own region.
Book Synopsis 12th Envibuild – Buildings and Environment – From Research to Application by : Ulrich Pont
Download or read book 12th Envibuild – Buildings and Environment – From Research to Application written by Ulrich Pont and published by Trans Tech Publications Ltd. This book was released on 2019-01-25 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 12th international enviBUILD conference (7th & 8th September 2017) Selected, peer reviewed papers from the 12th international enviBUILD conference, September 7-8, 2017, Vienna, Austria
