Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Metallurgical Coatings And Thin Films 2000
Download Metallurgical Coatings And Thin Films 2000 full books in PDF, epub, and Kindle. Read online Metallurgical Coatings And Thin Films 2000 ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Metallurgical Coatings and Thin Films 1992 by : G.E. McGuire
Download or read book Metallurgical Coatings and Thin Films 1992 written by G.E. McGuire and published by Elsevier. This book was released on 2012-12-02 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the increasingly important requirements for high technology materials is that they possess near-surface properties different to their bulk properties. Specific surface properties are generally achieved through the use of these films or coatings or by modifying the structure or composition of the near surface. This two-volume work contains 157 papers covering a wide range of topics involving films, coatings, and modified surfaces. All aspects of the development of deposition technologies are addressed including basic research, applied research, applications development and full scale industrial production. The work will be of interest to materials scientists, physicists, electronic, chemical and mechanical engineers, and chemists.
Book Synopsis Metallurgical Coatings and Thin Films 1990 by : B.D. Sartwell
Download or read book Metallurgical Coatings and Thin Films 1990 written by B.D. Sartwell and published by Elsevier. This book was released on 2012-12-02 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgical Coatings and Thin Films 1990 presents the Proceedings of the 17th International Conference on Metallurgical Coatings and 8th International Conference on Thin Films, held in San Diego, California on April 2-6, 1990. It contains 219 papers covering a wide range of topics related to metallurgical coatings and thin films, including high temperature coatings, hard coatings, diamond films, tribology, and ion beam modification. Organized into 99 chapters, this volume begins with a discussion of a thermochemical model for diamond growth from the vapor phase and an experiment in large area diamond coating using a combustion flame torch in its traversing mode. It then explores the properties of diamond films, preparation of diamond-like carbon films using various ion-beam-assisted techniques, deposition of diamond-like films by laser ablation, and coating of cubic BN films on different substrates. The book examines surface processes and rate-determining steps in plasma-induced chemical vapor deposition, and addition of rare earths to improve scale adherence on heat-resisting alloys and coatings. The reader is introduced to high temperature wear and clearance control coatings, thermal barrier coatings, and corrosion resistant coatings. The book also discusses modification of coatings/surfaces to reduce friction; the mechanics of the tribology of thin films systems; mechanochemical interactions in the tribological behavior of materials; analysis and micromechanical testing of tribological coatings; surface modification using directed ion beams; and industrial equipment and processes. This book is a valuable resource for students and researchers interested in metallurgical coatings and thin films.
Book Synopsis Metallurgical Coatings and Thin Films 1991 by : G.E. McGuire
Download or read book Metallurgical Coatings and Thin Films 1991 written by G.E. McGuire and published by Elsevier. This book was released on 2012-12-02 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this two-volume set represent the work of over two hundred international researchers from universities, government laboratories and industry, with diverse backgrounds and interests in a wide range of coatings and thin film processes. The two hundred and six papers attest to the fact that Metallurgical Coatings is a rapidly growing field attracting experts from the large materials, scientific and technical community. The papers will be a useful and dynamic tool for those wishing to increase their knowledge on metallurgical coatings, as well as providing a guide to recent literature in this field.
Book Synopsis Metallurgical Coatings and Thin Films by :
Download or read book Metallurgical Coatings and Thin Films written by and published by . This book was released on 1991 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Proceedings of the 30th International Conference on Metallurgical Coatings and Thin Films by : Allan Matthews
Download or read book Proceedings of the 30th International Conference on Metallurgical Coatings and Thin Films written by Allan Matthews and published by . This book was released on 2004 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Handbook of Deposition Technologies for Films and Coatings by : Peter M. Martin
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Book Synopsis Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing by : Jay Lee
Download or read book Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing written by Jay Lee and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern industry imposes ever increasing requirements upon tools and tool materials as to the provision for performance under the conditions of high cutting speeds and dynamic loads as well as under intensive thermal and chemical interactions with workpiece materials. The industry demands a higher productivity in combination with the accuracy of geometry and dimensions of workpieces and quality of working surfaces of the machined pieces. These requirements are best met by the tool superhard materials (diamond and diamond-like cubic boron nitride). Ceramics based on silicon carbide, aluminum and boron oxides as well as on titanium, silicon and aluminum nitrides offer promise as tool materials. Tungsten-containing cemented carbides are still considered as suitable tool materials. Hi- hardness and high strength composites based on the above materials fit all the requirements imposed by machining jobs when manufacturing elements of machinery, in particular those operating under the extreme conditions of high temperatures and loads. These elements are produced of difficult-- machine high-alloy steels, nickel refractory alloys, high-tech ceramics, materials with metallic and non-metallic coatings having improved wear resistance, as well as of special polymeric and glass-ceramic materials. Materials science at high pressure deals with the use of high-pressure techniques for the development and production of unique materials whose preparation at ambient pressure is impossible (e. g. , diamond, cubic boron nitride, etc. ) or of materials with properties exceeding those of materials produced at ambient pressure (e. g. , high-temperature superconductors).
Book Synopsis Progress in Metal Additive Manufacturing and Metallurgy by : Robert Pederson
Download or read book Progress in Metal Additive Manufacturing and Metallurgy written by Robert Pederson and published by MDPI. This book was released on 2020-12-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of additive manufacturing (AM) processes applied to the fabrication of structural components creates the need for design methodologies supporting structural optimization approaches that take into account the specific characteristics of the process. While AM processes enable unprecedented geometrical design freedom, which can result in significant reductions of component weight, on the other hand they have implications in the fatigue and fracture strength due to residual stresses and microstructural features. This is linked to stress concentration effects and anisotropy that still warrant further research. This Special Issue of Applied Sciences brings together papers investigating the features of AM processes relevant to the mechanical behavior of AM structural components, particularly, but not exclusively, from the viewpoints of fatigue and fracture behavior. Although the focus of the issue is on AM problems related to fatigue and fracture, articles dealing with other manufacturing processes with related problems are also be included.
Book Synopsis Surface & Coatings Technology by : B. D. Sartwell
Download or read book Surface & Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.
Book Synopsis Metallurgical Coatings and Thin Films 1994 by :
Download or read book Metallurgical Coatings and Thin Films 1994 written by and published by . This book was released on 1994 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Handbook of Metallurgical Process Design by : George E. Totten
Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.
Book Synopsis Engineering Thin Films and Nanostructures with Ion Beams by : Emile Knystautas
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Book Synopsis Surface Engineering by : Ashok Kumar
Download or read book Surface Engineering written by Ashok Kumar and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings from the 2002 TMS Annual Meeting address the scientific issues related to surface engineering phenomenon in synthesis, characterization, and application for all materials. This collection of papers provides a multidisciplinary discussion on surface-related phenomena by which materials performance may be enhanced through engineered interfaces and surface modification technologies. Applied experimental and theoretical aspects that highlight, develop, and utilize approaches to understand and improve surface phenomena are also included. A collection of papers from the 2002 TMS Annual Meeting and Exhibition held in Seattle, Washington, February 17-21, 2002.
Book Synopsis Characterization of Minerals, Metals, and Materials 2016 by : Shadia Ikhmayies
Download or read book Characterization of Minerals, Metals, and Materials 2016 written by Shadia Ikhmayies and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization is an important and fundamental step in material research before and after processing. This bookfocuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. It is a highly authoritative collection of articles written by experts from around the world. The articles center on materials characterization, extraction, processing, corrosion, welding, solidification, and method development. In addition, articles focus on clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic, magnetic, environmental, advanced and soft materials. This book will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Book Synopsis High Power Impulse Magnetron Sputtering by : Daniel Lundin
Download or read book High Power Impulse Magnetron Sputtering written by Daniel Lundin and published by Elsevier. This book was released on 2019-08-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Power Impulse Magnetron Sputtering: Fundamentals, Technologies, Challenges and Applications is an in-depth introduction to HiPIMS that emphasizes how this novel sputtering technique differs from conventional magnetron processes in terms of both discharge physics and the resulting thin film characteristics. Ionization of sputtered atoms is discussed in detail for various target materials. In addition, the role of self-sputtering, secondary electron emission and the importance of controlling the process gas dynamics, both inert and reactive gases, are examined in detail with an aim to generate stable HiPIMS processes. Lastly, the book also looks at how to characterize the HiPIMS discharge, including essential diagnostic equipment. Experimental results and simulations based on industrially relevant material systems are used to illustrate mechanisms controlling nucleation kinetics, column formation and microstructure evolution. - Includes a comprehensive description of the HiPIMS process from fundamental physics to applications - Provides a distinctive link between the process plasma and thin film communities - Discusses the industrialization of HiPIMS and its real world applications
Book Synopsis Synthesis and Characterization of Transition Metal Diborides by : Jimmy Thörnberg
Download or read book Synthesis and Characterization of Transition Metal Diborides written by Jimmy Thörnberg and published by Linköping University Electronic Press. This book was released on 2021-01-20 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis is devoted towards physical vapor deposition (PVD) of thin films of transition-metal (TM) diborides, focused on the material system TiBx, Ti1-xAlxB2-y and CrBx. The metal diborides are a large family of compounds with both metallic and ceramic properties, due to its bonding nature being a mix of covalent and ionic bonds. Their characteristics include, e.g., good mechanical, electrical and thermal properties, while an improved oxidation and corrosion resistance are currently sought after. Furthermore, while the ideal composition of these diborides is TMB2, i.e. with a B to metal ratio of 2, the stoichiometry in the PVD deposited films typically diverges from this ratio. TiBx is often reported to be overstoichiometric, with x well above 2. One of the most known and commonly used member of the TM diboride family is TiBx, primarily used in hard-coating applications such as tools for machining Al. However, the material displays a fracture toughness and oxidation resistance that ideally needs to be improved. The films presented in this thesis were deposited by high power impulse magnetron sputtering (HiPIMS) and direct current magnetron sputtering (DCMS). Using both methods facilitates an improved control of both microstructure and composition, and hence the materials properties. With HiPIMS, understoichiometric TiBx films were grown and it was shown that these films can match and even exceed the overstoichiometric counterpart, deposited with DCMS, in terms of mechanical properties. The hardness and fracture toughness for TiB1.43 films were measured at 43.9±0.9 GPa and 4.2±0.1 MPa√m, compared to TiB2.70 films at 37.7±0.8 GPa and 3.1±0.1 MPa√m. Furthermore, the understoichiometric films significantly improve the oxidation resistance. Air annealing of TiB1.43, TiB2.20, and TiB2.70 films at 400 °C showed an average oxidation rate of 2.9±1.5, 7.1±1.0, and 20.0±5.0 nm/h, respectively, explained by the microstructural difference between over- and understoichiometric material. In TiBx films where x > 2, there is a B-rich tissue phase in the grain boundaries which is suggested to enhance oxidation. The hydroscopic nature of B2O3 causes more rapid oxidation and evaporation thus providing an easy oxidation pathway in B-rich regions. However, understoichiometric films where x < 2 do not show any significant boundary phases. Instead, the B deficiency is presented as planar defects with Ti-rich stacking faults. Hence the absence of the B-rich tissue phase has strongly contributed to increasing the oxidation resistance. Oxidation resistance and mechanical properties were also investigated for understoichiometric Ti1-xAlxB2-y coatings with varying Ti:Al and B:M ratios, obtained from both HiPIMS and DCMS depositions. Al alloying of the TM diboride TiBx significantly enhances the oxidation resistance. However, incorporating too much Al is at the expense of the excellent hardness seen in the pure TiBx, going from 46.2±1.1 GPa to 22.6±1.1 GPa for Ti0.9Al0.1B1.3 and Ti0.3Al0.7B1.3, respectively. Hence, a reduction in the Al content is needed to retain the mechanical properties. The boundary phase in this material consists of a Ti1-xAlxB2-y tissue phase, rich in either Al or B depending on the x and y values. An improved oxidation resistance in Ti1-xAlxB2-y was seen with reduced Al and B content, proposed to be due to absence of tissue phase in the grain boundaries, in line with the observations for TiBx. The oxide scale thickness of Ti0.9Al0.1B1.3 and Ti0.9Al0.1B1.9 after air annealing at 600 °C for 10 h was measured to be 205 nm and 320 nm, respectively. Moreover, the trends indicate a reduced oxidation rate as the oxide scale grows thicker. A systematical study of DCMS deposited CrBx coatings, 1.90 ≤ x 2.08, was also performed, motivated by CrBx being a material of interest for providing potential corrosion resistance. All films, irrespectable of the deposition conditions, exhibited (001) texture, with epitaxial growth observed when increasing temperature from 500 °C to 900 °C. Higher density (5.2 g/cm3) and smoother surfaces was seen in films grown at lower pressure, 5 mTorr (0.67 Pa), compared to higher pressure, 20 mTorr (2.67 Pa), and was explained by less gas scattering leading to more energetic particles impinging on the surface. CrBx film composition show no apparent dependence on substrate temperature, and has a slight dependence on deposition pressure for the samples deposited at 900 °C, with reduced B content for increasing pressure. Overstoichiometric CrB2.08 films showed the presence of large B-rich inclusions, and B deficiency in CrB1.90 films presented as planar defects with Cr-rich stacking faults, similar to understoichiometric TiBx. The thorough investigations of all the systems in this thesis are aimed towards improving the understanding of the correlation between the thin film synthesis process and the resulting composition and microstructure, which in turn dictates the properties of thin films. A particular emphasis is put on control of composition. I den här avhandlingen fokuserar jag på beläggningar av tunna filmer, dvs. tunna lager av material som läggs på en yta för att ge ytan vissa specifika egenskaper. Jag genomför metodiska analyser av de filmer jag får från två olika beläggningsmetoder; ”high-power impulse magnetron sputtering” (HiPIMS) och den mer konventionella metoden ”directcurrent magnetron sputtering” (DCMS). Dessa metoder skiljer sig främst åt i antal parametrar man kan variera för att kontrollera processen som styr vilket material som bildas, där HiPIMS är den metod med flest parametrar. Anledningen till att HiPIMS inte har sett ett större användningsområde till dags dato är att det är en relativt ny process jämfört med DCMS, och på grund av den komplexitet som tillkommer när man utökar mängden tillväxtparametrar. För båda processerna är en grundläggande förståelse av både processen och materialet önskvärt för att få ett optimerat material, med specifika önskade egenskaper. Material i fokus i denna avhandling är TiBx, Ti1-xAlxB2-y och CrBx, även kallade övergångsmetall-diborider, där Ti står för titan, Al för aluminium, Cr för krom, B för bor, och x/y står för variabler i sammansättningen av materialet. Dessa diborider bär med sig unika egenskaper från respektive element och innehåller en blandning av kovalenta bindningar och jon-bindningar. Beroende på sammansättningen av atomer så kan vi se olika mekaniska, elektriska och termiska egenskaper samt olika grad av oxidering- och eroderings-resistans. TiBx är till exempel välkänt för sina tillämpningar inom skärande bearbetning, men har inte lika lovande egenskaper när det kommer till beständighet mot oxidering. Det här är delvis en konsekvens av att man idag kommersiellt använder sig främst av DCMS för tillväxt av dessa beläggningar, då denna metod typiskt genererar överstökiometriska tunna filmer av TiBx (x > 2), vilket i sin tur påverkar beständigheten mot oxidering negativt. Med hjälp av HiPIMS kan man kontrollera stökiometrin av filmen i större grad, och kan således generera understökiometrisk TiBx (x < 2) som jag visar på har bättre mekaniska egenskaper, bland annat högre hårdhet, bättre brottseghet och förbättrad beständighet mot oxidering, kontra den överstökiometriska motsvarigheten. Hur mikrostrukturen i överstökiometriska TiBx filmer ser ut är välkänt, där överflödigt B ansamlas i korngränserna och bilder en s.k. ”B-rik vävnadsfas”. Jag har påvisat hur motsvarande mikrostruktur ser ut för understökiometrisk TiBx filmer, något som fram tills nu varit okänt. I dessa faser saknas vävnadsfas i korngränserna, och istället hittas överskottet av Ti som plandefekter i de kolumnära TiB2-strukturerna i filmen. Jag visar på att avsaknaden av vävnadsfas i korngränserna tydligt förbättrar beständigheten mot oxidering, vilket troligtvis beror på att just korngränserna, och deras innehåll, agerar som en katalys for oxidering. På samma sätt undersöker jag hur materialsystemet Ti1-xAlxBy-2 beter sig med varierande Ti:Al förhållande och även B:M förhållande (bor till metall), i filmer skapade med både DCMS och HiPIMS. Målet med inkluderingen av Al är just att förbättra beständighet mot oxidering, och samtidigt bevara de åtråvärda mekaniska egenskaperna som filmer av TiBx har. Korngränserna i det här materialet består av en vävnadsfasblandning, rik på antingen Al eller B, beroende på förhållandet mellan x och y i Ti1- xAlxBy-2. Jag visar på att en reducering av denna vävnadsfas även här förbättrar beständigheten mot oxidering. Det påvisas genom att reducera Al- och B-innehållet i filmerna, vilket minskar vävnadsfasen i korngränserna, och således förbättras beständigheten mot oxidering. En systematisk undersökning av tunna filmer av CrBx, belagda med DCMS, har genomförts, då detta är ett materialsystem med potential för beständighet mot korrosion. Både lätt över- och understökiometriska filmer växtes, och fick sin mikrostruktur och lokala sammansättning undersökt. Alla filmer påvisade en (001) textur, med epitaxiell tillväxt när temperaturen ökade från 500 C° till 900 C°. Högre densitet (~5.2 g/cm3) och jämnare ytor sågs för filmer belagda vid lägre tryck, 5 mTorr (0.67 Pa), jämfört med högre tryck, 20 mTorr (2.67 Pa). Kompositionen för CrBx filmerna påvisade inte ett temperaturberoende, men visade ett marginellt beroende på beläggningstryck för prover växta vid 900 C°. Även observerat för understökiometriska CrB1.90 filmer är att underskottet av B presenteras som plandefekter med Cr-rika plan i de kolumnära CrB2- strukturerna i filmen, precis som i understökiometrisk TiBx. I överstökiometriska CrB2.08 filmer så visades stora inneslutningar av ansamlat B.
Book Synopsis Printing on Polymers by : Joanna Izdebska-Podsiadły
Download or read book Printing on Polymers written by Joanna Izdebska-Podsiadły and published by William Andrew. This book was released on 2015-09-24 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printing on Polymers: Fundamentals and Applications is the first authoritative reference covering the most important developments in the field of printing on polymers, their composites, nanocomposites, and gels. The book examines the current state-of-the-art and new challenges in the formulation of inks, surface activation of polymer surfaces, and various methods of printing. The book equips engineers and materials scientists with the tools required to select the correct method, assess the quality of the result, reduce costs, and keep up-to-date with regulations and environmental concerns. Choosing the correct way of decorating a particular polymer is an important part of the production process. Although printing on polymeric substrates can have desired positive effects, there can be problems associated with various decorating techniques. Physical, chemical, and thermal interactions can cause problems, such as cracking, peeling, or dulling. Safety, environmental sustainability, and cost are also significant factors which need to be considered. With contributions from leading researchers from industry, academia, and private research institutions, this book serves as a one-stop reference for this field—from print ink manufacture to polymer surface modification and characterization; and from printing methods to applications and end-of-life issues. - Enables engineers to select the correct decoration method for each material and application, assess print quality, and reduce costs - Increases familiarity with the terminology, tests, processes, techniques, and regulations of printing on plastic, which reduces the risk of adverse reactions, such as cracking, peeling, or dulling of the print - Addresses the issues of environmental impact and cost when printing on polymeric substrates - Features contributions from leading researchers from industry, academia, and private research institutions
