Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Creep And Damage In Materials And Structures
Download Creep And Damage In Materials And Structures full books in PDF, epub, and Kindle. Read online Creep And Damage In Materials And Structures ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Creep and Damage in Materials and Structures by : Holm Altenbach
Download or read book Creep and Damage in Materials and Structures written by Holm Altenbach and published by Springer. This book was released on 2014-10-08 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a concise survey of constitutive and structural modeling for high temperature creep, damage, low – cycle fatigue and other inelastic conditions. The book shows the creep and continuum damage mechanics as rapidly developing discipline which interlinks the material science foundations, the constitutive modeling and computer simulation application to analysis and design of simple engineering components. It is addressed to young researchers and scientists working in the field of mechanics of inelastic, time-dependent materials and structures, as well as to PhD students in computational mechanics, material sciences, mechanical and civil engineering.
Book Synopsis Creep and Fracture of Engineering Materials and Structures by : T. Sakuma
Download or read book Creep and Fracture of Engineering Materials and Structures written by T. Sakuma and published by Trans Tech Publications Ltd. This book was released on 1999-10-12 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Recent research on the creep and fracture of engineering materials is presented, with particular emphasis being placed on: mechanisms of high-temperature deformation and fracture, materials for high-temperature service, the behavior of single and polycrystals, components and structures, grain boundaries and interfaces, and superplasticity.
Book Synopsis Modeling of Material Damage and Failure of Structures by : Jacek J. Skrzypek
Download or read book Modeling of Material Damage and Failure of Structures written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive and comprehensive survey of one- and three-dimensional damage models for elastic and inelastic solids. The book not only provides a rich current source of knowledge, but also describes examples of practical applications, numerical procedures, and computer codes. The style throughout is systematic, clear, and concise, and supported by illustrative diagrams. The state of the art is given by some 200 references.
Book Synopsis Modeling of Creep for Structural Analysis by : Konstantin Naumenko
Download or read book Modeling of Creep for Structural Analysis written by Konstantin Naumenko and published by Springer Science & Business Media. This book was released on 2007-04-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops methods to simulate and analyze the time-dependent changes of stress and strain states in engineering structures up to the critical stage of creep rupture. The objective of this book is to review some of the classical and recently proposed approaches to the modeling of creep for structural analysis applications. It also aims to extend the collection of available solutions of creep problems by new, more sophisticated examples.
Book Synopsis Creep and Damage in Materials and Structures by : Holm Altenbach
Download or read book Creep and Damage in Materials and Structures written by Holm Altenbach and published by Springer. This book was released on 2014-05-04 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a concise survey of constitutive and structural modeling for high temperature creep, damage, low – cycle fatigue and other inelastic conditions. The book shows the creep and continuum damage mechanics as rapidly developing discipline which interlinks the material science foundations, the constitutive modeling and computer simulation application to analysis and design of simple engineering components. It is addressed to young researchers and scientists working in the field of mechanics of inelastic, time-dependent materials and structures, as well as to PhD students in computational mechanics, material sciences, mechanical and civil engineering.
Book Synopsis Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics by : Emmanuel Gdoutos
Download or read book Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2020-05-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 3rd edition of the International Conference on Theoretical, Applied and Experimental Mechanics. The papers focus on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture mechanics, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.
Book Synopsis Creep of Engineering Materials and Structures by : G. Bernasconi
Download or read book Creep of Engineering Materials and Structures written by G. Bernasconi and published by Elsevier Science & Technology. This book was released on 1979 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Creep and Hygrothermal Effects in Concrete Structures by : Zdeněk P. Bažant
Download or read book Creep and Hygrothermal Effects in Concrete Structures written by Zdeněk P. Bažant and published by Springer. This book was released on 2018-01-17 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive treatise covers in detail practical methods of analysis as well as advanced mathematical models for structures highly sensitive to creep and shrinkage. Effective computational algorithms for century-long creep effects in structures, moisture diffusion and high temperature effects are presented. The main design codes and recommendations (including RILEM B3 and B4) are critically compared. Statistical uncertainty of century-long predictions is analyzed and its reduction by extrapolation is discussed, with emphasis on updating based on short-time tests and on long-term measurements on existing structures. Testing methods and the statistics of large randomly collected databases are critically appraised and improvements of predictions of multi-decade relaxation of prestressing steel, cyclic creep in bridges, cracking damage, etc., are demonstrated. Important research directions, such as nanomechanical and probabilistic modeling, are identified, and the need for separating the long-lasting autogenous shrinkage of modern concretes from the creep and drying shrinkage data and introducing it into practical prediction models is emphasized. All the results are derived mathematically and justified as much as possible by extensive test data. The theoretical background in linear viscoelasticity with aging is covered in detail. The didactic style makes the book suitable as a textbook. Everything is properly explained, step by step, with a wealth of application examples as well as simple illustrations of the basic phenomena which could alternate as homeworks or exams. The book is of interest to practicing engineers, researchers, educators and graduate students.
Book Synopsis Mechanics of Creep Brittle Materials 1 by : A.C.F. Cocks
Download or read book Mechanics of Creep Brittle Materials 1 written by A.C.F. Cocks and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure of components which operate in the creep range can result either from the growth of a dominant crack or through the accumulation of 'damage' in the material. Conventional and nuclear power generating plant are generally designed on the basis of continuum failure, with assessment routes providing an indication of the effects of flaws on component performance. Another example where an understanding of creep failure is important is in the design of offshore structures which operate in arctic waters. These structures can be subjected to quite considerable forces by wind-driven ice sheets, which are limited by failure of the ice sheet. Design codes are currently being developed which identify the different mechanisms of failure, ranging from continuum crushing to radial cracking and buckling of the ice sheet. Our final example concerns engineering ceramics, which are currently being considered for use in a wide range of high-temperature applications. A major problem preventing an early adoption of these materials is their brittle response at high stresses, although they can behave in a ductile manner at lower stresses. In each of the above situations an understanding of the processes of fast fracture, creep crack growth and continuum failure is required, and in particular an understanding of the material and structural features that influence the transition from brittle to ductile behaviour. The translation of this information to component design is most advanced for metallic components.
Book Synopsis Creep in Structures VI by : Holm Altenbach
Download or read book Creep in Structures VI written by Holm Altenbach and published by Springer Nature. This book was released on 2023-08-04 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a current state of the art in analysis and modeling of creep phenomena with applications to the structural mechanics. It presents the some presentations from the IUTAM-Symposium series "Creep in Structures", which held in Magdeburg (Germany) in September 2023, and it discusses many advances and new results in the field. These are for example: interlinks of mechanics with materials science in multi-scale analysis of deformation and damage mechanisms over a wide range of stresses and temperature; development and analysis of new alloys for (ultra)high-temperature applications; formulation and calibration of advanced constitutive models of inelastic behavior under transient loading and temperature conditions; development of efficient procedures and machine learning techniques for identification of material parameters in advanced constitutive laws; introduction of gradient-enhanced and non-local theories to account for damage and fracture processes; and application of new experimental methods, such as digital image correlation, for the analysis of inelastic deformation under multi-axial stress state.
Book Synopsis IUTAM Symposium on Creep in Structures by : S. Murakami
Download or read book IUTAM Symposium on Creep in Structures written by S. Murakami and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain 48 innovative papers consolidating the development of creep research since 1990 and discussing the new horizons in this fundamental field of applied mechanics in the coming century. This volume is useful for researchers and graduate course students in the relevant fields.
Book Synopsis Creep and Fatigue in Polymer Matrix Composites by : Rui Miranda Guedes
Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites Puts a specific focus on viscoelastic and viscoplastic modeling Features the time-temperature-age superposition principle for predicting long-term response Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases
Book Synopsis Nontraditional Methods of Sensing Stress, Strain, and Damage in Materials and Structures by : David A. Stubbs
Download or read book Nontraditional Methods of Sensing Stress, Strain, and Damage in Materials and Structures written by David A. Stubbs and published by ASTM International. This book was released on 1997 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: These facsimiles of 16 contributions from the symposium held in May 1996 in Orlando provide information on the behavior of materials and structures. The authors describe novel ways to measure point to point deformation (or strain, when normalized), procedures for measuring crack length and the stres
Book Synopsis Engineering Damage Mechanics by : Jean Lemaitre
Download or read book Engineering Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting his major contributions to the field, Jean Lemaitre’s "Engineering Damage Mechanics" presents simplified and advanced methods organized within a unified framework for designers of any mechanical component. Explains how to apply continuous damage mechanics to failures of mechanical and civil engineering components in ductile, creep, fatigue and brittle conditions. Incorporates many basic examples, while emphasizing key practical considerations such as material parameter identification, and provides perspective on the advantage and disadvantages of various approaches.
Book Synopsis Advanced Theories for Deformation, Damage and Failure in Materials by : Holm Altenbach
Download or read book Advanced Theories for Deformation, Damage and Failure in Materials written by Holm Altenbach and published by Springer Nature. This book was released on 2022-08-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces advanced theories for deformation, damage, and failure in materials. The overall continuum mechanical framework was marked out and added by creep and damage mechanics of materials at elevated temperatures. The time-dependent and time-independent models of cyclic plasticity for low cycle and thermomechanical fatigue life assessment were specified in a very special manner: instead of three-dimensional statements, only one-dimensional rheological models were discussed. Anisotropic plasticity during non-proportional loading and anisotropy of yield/failure criteria is more and more important in modern applications. It is showing how the limit states of materials can be estimated. In addition, the damage and failure of composite materials demonstrate the possibility to extend continuum mechanics to continuum damage mechanics of composite materials.
Book Synopsis Anisotropic Behaviour of Damaged Materials by : Jacek J. Skrzypek
Download or read book Anisotropic Behaviour of Damaged Materials written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this book is based on the keynote lectures delivered during the Inter national Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Krakow-Przegorzaiy, Poland, September 9-11, 2002. The Symposium was organized by the Solid Mechanics Division of the Institute of Mechanics and Machine Design - Cracow University of Technology, under aus pices of the Dean of the Faculty of Mechanical Engineering, Cracow University of Technology, Prof. S. Michalowski. The Co-organizers of the ABDM Symposium were: • Martin-Luther-Universitat Halle-Wittenberg, • Centre of Excellence for Advanced Materials and Structures AMAS at the In stitute of Fundamental Technological Research of the Polish Academy of Sci ences, Warsaw, • Committee of Mechanics of the Polish Academy of Sciences, Warsaw. Ten chapters of this book in their present form essentially exceed lectures de livered at the Symposium. They should rather be read as not only author's recent achievements in the field, but also the state of art and synthesis done by the lead ers in the mechanics community. The mixed formula of the Symposium, namely: the invited lectures and presentations of the original papers by the participants was used. 23 original papers, published in the Symposium Proceedings on CD, exhaust the full scope of the ABDM Symposium. The present book provides a survey of various damage models focusing on the damage response in anisotropic materials as well as damage-induced anisotropy.
Book Synopsis Creep and Fracture of Engineering Materials and Structures by : T. Sakuma
Download or read book Creep and Fracture of Engineering Materials and Structures written by T. Sakuma and published by . This book was released on 2000 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sampling of proceedings includes the following: (1) "Recent Developments in the Analysis of Creep Rupture Data"; (2) "Creep Crack Growth in Nearly Fully-Lamellar Gamma TiA1 Alloys"; (3) "Research of Welding Effect on Creep Damage of High Temperature Furnace Tubes"; (4) "The Reversibility of Creep Strain at Low Stresses and Low Temperatures"; (5) "Deformation Behavior of 7475 Aluminum Alloy at High Temperatures"; and (6) "Creep of Reinforced and Unreinforced AZ91 Magnesium Alloy."
