Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Advanced Theories For Deformation Damage And Failure In Materials
Download Advanced Theories For Deformation Damage And Failure In Materials full books in PDF, epub, and Kindle. Read online Advanced Theories For Deformation Damage And Failure In Materials ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Advanced Theories for Deformation, Damage and Failure in Materials by : Holm Altenbach
Download or read book Advanced Theories for Deformation, Damage and Failure in Materials written by Holm Altenbach and published by Springer Nature. This book was released on 2022-08-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces advanced theories for deformation, damage, and failure in materials. The overall continuum mechanical framework was marked out and added by creep and damage mechanics of materials at elevated temperatures. The time-dependent and time-independent models of cyclic plasticity for low cycle and thermomechanical fatigue life assessment were specified in a very special manner: instead of three-dimensional statements, only one-dimensional rheological models were discussed. Anisotropic plasticity during non-proportional loading and anisotropy of yield/failure criteria is more and more important in modern applications. It is showing how the limit states of materials can be estimated. In addition, the damage and failure of composite materials demonstrate the possibility to extend continuum mechanics to continuum damage mechanics of composite materials.
Book Synopsis Failure and Damage Analysis of Advanced Materials by : Holm Altenbach
Download or read book Failure and Damage Analysis of Advanced Materials written by Holm Altenbach and published by Springer. This book was released on 2014-12-01 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present basic concepts and new developments in failure and damage analysis with focus on advanced materials such as composites, laminates, sandwiches and foams, and also new metallic materials. Starting from some mathematical foundations (limit surfaces, symmetry considerations, invariants) new experimental results and their analysis are shown. Finally, new concepts for failure prediction and analysis will be introduced and discussed as well as new methods of failure and damage prediction for advanced metallic and non-metallic materials. Based on experimental results the traditional methods will be revised.
Book Synopsis Plasticity, Damage and Fracture in Advanced Materials by : Holm Altenbach
Download or read book Plasticity, Damage and Fracture in Advanced Materials written by Holm Altenbach and published by Springer Nature. This book was released on 2019-11-26 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents studies on the plasticity, failure, and damage behavior of materials and structures under monotonic and cyclic loads. Featuring contributions by leading authors from around the globe, it focuses on the description of new effects observed in experiments, such as damage under cyclic loading. It also proposes various simulation models based on different approaches and compares them with tests, taking scaling aspects into account.
Book Synopsis Deformation and Failure in Metallic Materials by : Kolumban Hutter
Download or read book Deformation and Failure in Metallic Materials written by Kolumban Hutter and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the deformation and failure in metallic materials, summarizing the results of a research programme financed by the "Deutsche Forschungsgemeinschaft". It presents the recent engineering as well as mathematical key aspects of this field for a broad community. Its main focus is on the constitutive behaviour as well as the damage and fracture of metallic materials, covering their mathematical foundation, modelling and numerics, but also relevant experiments and their verification.
Book Synopsis Advances in Mechanics of Time-Dependent Materials by : Holm Altenbach
Download or read book Advances in Mechanics of Time-Dependent Materials written by Holm Altenbach and published by Springer Nature. This book was released on 2023-03-09 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current trends in Mechanics of Time Dependent Materials. It covers a number of cutting-edge themes, such as characterization of linear and nonlinear mechanical behavior of viscoelastic materials and their composites, taking into consideration large deformations, low, moderate and large strain rates, as well as failure and fracture phenomena. The contributions are inspired by advanced applications in modern technologies, such as injection molding and extrusion.
Book Synopsis Fundamentals of Machine Component Design by : Wael A. Altabey
Download or read book Fundamentals of Machine Component Design written by Wael A. Altabey and published by Elsevier. This book was released on 2023-10-02 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Machine Component Design bridges theory and practice to provide readers with a thorough understanding of best practices for machine component design and application. Load and stress analysis, fatigue, fracture, and other mechanical behaviors that can result in the failure of a machine component are discussed in the early chapters, before the book moves onto to cover different connections (welded and bolted) prevalent in machine components, and then individual components such as gears, shafts, bearings, springs, pressure vessels, brakes, clutches, keys and couplings, and more. The book ends with chapters outlining different design methods as well as design problems for readers to practice with, the solutions to which are also provided. Covers the design of shafts, power screws, bolts, welded connections, springs, and pressure vessels, as well as transmitted power elements such as belts, chains, gears, and wire ropes Outlines finite element methods and other techniques that can be used for effectively designing machine components Discusses contact and sliding bearings, keys and couplings, gears (helical, spur, bevel, and worm), and more Includes solved problems to help readers refine their skills
Book Synopsis The Theory of Materials Failure by : Richard M. Christensen
Download or read book The Theory of Materials Failure written by Richard M. Christensen and published by Oxford University Press. This book was released on 2013-03-14 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the failure of materials - everything from metals to brittle ceramics.
Book Synopsis Dynamic Deformation, Damage and Fracture in Composite Materials and Structures by : Vadim V. Silberschmidt
Download or read book Dynamic Deformation, Damage and Fracture in Composite Materials and Structures written by Vadim V. Silberschmidt and published by Woodhead Publishing. This book was released on 2022-06-15 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials, with their higher exposure to dynamic loads, have increasingly been used in aerospace, naval, automotive, sports, and other sectors over the past few decades. This second edition of Dynamic Deformation, Damage, and Fracture in Composite Materials and Structures reviews various aspects of dynamic deformation, damage, and fracture, mostly in composite laminates and sandwich structures, in a broad range of application areas including aerospace, automotive, defense, and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast, and penetrative events. This new edition has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. Examines dynamic deformation and fracture of composite materials, covering experimental, analytical, and numerical aspects Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting Addresses important application areas such as aerospace, automotive, wind energy, defense, and sports
Book Synopsis Advances in Damage Mechanics: Metals and Metal Matrix Composites by : George Z. Voyiadjis
Download or read book Advances in Damage Mechanics: Metals and Metal Matrix Composites written by George Z. Voyiadjis and published by Elsevier. This book was released on 2012-12-02 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in a single and unified volume a clear and thorough presentation of the recent advances in continuum damage mechanics for metals and metal matrix composites. Emphasis is placed on the theoretical formulation of the different constitutive models in this area, but sections are added to demonstrate the applications of the theory. In addition, some sections contain new material that has not appeared before in the literature. The book is divided into three major parts: Part I deals with the scalar formulation and is limited to the analysis of isotropic damage in materials; Parts II and III deal with the tensor formulation and is applied to general states of deformation and damage. The material appearing in this text is limited to plastic deformation and damage in ductile materials (e.g. metals and metal matrix composites) but excludes many of the recent advances made in creep, brittle fracture, and temperature effects since the authors feel that these topics require a separate volume for this presentation. Furthermore, the applications presented in this book are the simplest possible ones and are mainly based on the uniaxial tension test.
Book Synopsis Advanced Mechanics of Materials and Applied Elasticity by : Ansel C. Ugural
Download or read book Advanced Mechanics of Materials and Applied Elasticity written by Ansel C. Ugural and published by Prentice Hall. This book was released on 2019-07-29 with total page 1241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Leading Practical Guide to Stress Analysis—Updated with State-of-the-Art Methods, Applications, and Problems This widely acclaimed exploration of real-world stress analysis reflects advanced methods and applications used in today’s mechanical, civil, marine, aeronautical engineering, and engineering mechanics/science environments. Practical and systematic, Advanced Mechanics of Materials and Applied Elasticity, Sixth Edition, has been updated with many new examples, figures, problems, MATLAB solutions, tables, and charts. The revised edition balances discussions of advanced solid mechanics, elasticity theory, classical analysis, and computer-oriented approaches that facilitate solutions when problems resist conventional analysis. It illustrates applications with case studies, worked examples, and problems drawn from modern applications, preparing readers for both advanced study and practice. Readers will find updated coverage of analysis and design principles, fatigue criteria, fracture mechanics, compound cylinders, rotating disks, 3-D Mohr’s circles, energy and variational methods, buckling of various columns, common shell types, inelastic materials behavior, and more. The text addresses the use of new materials in bridges, buildings, automobiles, submarines, ships, aircraft, and spacecraft. It offers significantly expanded coverage of stress concentration factors and contact stress developments. This book aims to help the reader Review fundamentals of statics, solids mechanics, stress, and modes of load transmission Master analysis and design principles through hands-on practice to illustrate their connections Understand plane stress, stress transformations, deformations, and strains Analyze a body’s load-carrying capacity based on strength, stiffness, and stability Learn and apply the theory of elasticity Explore failure criteria and material behavior under diverse conditions, and predict component deformation or buckling Solve problems related to beam bending, torsion of noncircular bars, and axisymmetrically loaded components, plates, or shells Use the numerical finite element method to economically solve complex problems Characterize the plastic behavior of materials Register your product for convenient access to downloads, updates, and/or corrections as they become available. See inside book for details.
Book Synopsis Continuum Damage and Fracture Mechanics by : Andreas Öchsner
Download or read book Continuum Damage and Fracture Mechanics written by Andreas Öchsner and published by Springer. This book was released on 2015-10-15 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers readers an introduction to fracture mechanics, equipping them to grasp the basic ideas of the presented approaches to modeling in applied mechanics In the first part, the book reviews and expands on the classical theory of elastic and elasto-plastic material behavior. A solid understanding of these two topics is the essential prerequisite to advancing to damage and fracture mechanics. Thus, the second part of this course provides an introduction to the treatment of damage and fractures in the context of applied mechanics Wherever possible, the one-dimensional case is first introduced and then generalized in a following step. This departs somewhat from the more classical approach, where first the most general case is derived and then simplified to special cases. In general, the required mathematics background is kept to a minimum Tutorials are included at the end of each chapter, presenting the major steps for the solution and offering valuable tips and tricks. The supplementary problems featured in the book
Book Synopsis Advanced Computational Materials Modeling by : Miguel Vaz Junior
Download or read book Advanced Computational Materials Modeling written by Miguel Vaz Junior and published by John Wiley & Sons. This book was released on 2011-09-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its discussion of strategies for modeling complex materials using new numerical techniques, mainly those based on the finite element method, this monograph covers a range of topics including computational plasticity, multi-scale formulations, optimization and parameter identification, damage mechanics and nonlinear finite elements.
Book Synopsis Damage and Fracture of Disordered Materials by : Dusan Krajcinovic
Download or read book Damage and Fracture of Disordered Materials written by Dusan Krajcinovic and published by Springer Science & Business Media. This book was released on 2000-08-02 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal objective of this book is to relate the random distributions of defects and material strength on the microscopic scale with the deformation and residual strength of materials on the macroscopic scale. To reach this goal the authors considered experimental, analytical and computational models on atomic, microscopic and macroscopic scales.
Book Synopsis Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials by : Michael R. Mitchell
Download or read book Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials written by Michael R. Mitchell and published by ASTM International. This book was released on 1992 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Damage Prognosis by : Daniel J. Inman
Download or read book Damage Prognosis written by Daniel J. Inman and published by John Wiley & Sons. This book was released on 2005-04-22 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage prognosis is a natural extension of damage detection and structural health monitoring and is forming a growing part of many businesses. This comprehensive volume presents a series of fundamental topics that define the new area of damage prognosis. Bringing together essential information in each of the basic technologies necessary to perform damage prognosis, it also reflects the highly interdisciplinary nature of the industry through the extensive referencing of each of the component disciplines. Taken from lectures given at the Pan American Advanced Studies Institute in Damage Prognosis sponsored by the US National Science Foundation in cooperation with Los Alamos National Laboratories, this book will be essential reading for anyone looking to get to grips with the fundamentals of damage prognosis. Presents the 'ground rules' for Damage Prognosis. Deals with interdisciplinary topics: rotating machines, aerospace structures, automotive components and civil structures. Covers essential technical material: equations, graphs and plots, tables and photographs. Offers additional material from the associated workshop on an active web site.
Book Synopsis Damage Mechanics in Engineering Materials by : Jiann-Wen Woody Ju
Download or read book Damage Mechanics in Engineering Materials written by Jiann-Wen Woody Ju and published by Elsevier. This book was released on 1998-03-04 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty peer-reviewed papers that are based on the presentations made at the symposium on "Damage Mechanics in Engineering Materials" on the occasion of the Joint ASME/ASCE/SES Mechanics Conference (McNU97), held in Evanston, Illinois, June 28-July 2, 1997. The key area of discussion was on the constitutive modeling of damage mechanics in engineering materials encompassing the following topics: macromechanics/micromechanical constitutive modeling, experimental procedures, numerical modeling, inelastic behavior, interfaces, damage, fracture, failure, computational methods. The book is divided into six parts: Study of damage mechanics. Localization and damage. Damage in brittle materials. Damage in metals and metal matrix composites. Computational aspects of damage models. Damage in polymers and elastomers.
Book Synopsis Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques by : Vadim V. Silberschmidt
Download or read book Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques written by Vadim V. Silberschmidt and published by Elsevier. This book was released on 2020-04-03 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques provides a detailed overview of the latest developments in the mechanics of modern metal forming manufacturing. Focused on mechanics as opposed to process, it looks at the mechanical behavior of materials exposed to loading and environmental conditions related to modern manufacturing processes, covering deformation as well as damage and fracture processes. The book progresses from forming to machining and surface-treatment processes, and concludes with a series of chapters looking at recent and emerging technologies. Other topics covered include simulations in autofrettage processes, modeling strategies related to cutting simulations, residual stress caused by high thermomechanical gradients and pultrusion, as well as the mechanics of the curing process, forging, and cold spraying, among others. Some non-metallic materials, such as ceramics and composites, are covered as well. Synthesizes the latest research in the mechanics of modern metal forming processes Suggests theoretical models and numerical codes to predict mechanical responses Covers mechanics of shot peening, pultrusion, hydroforming, magnetic pulse forming Considers applicability of different materials and processes for optimum performance
