Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Surface Segregation
Download Surface Segregation full books in PDF, epub, and Kindle. Read online Surface Segregation ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Auger Electron Spectroscopy Study of Surface Segregation in Copper-aluminum Alloys by : John Ferrante
Download or read book Auger Electron Spectroscopy Study of Surface Segregation in Copper-aluminum Alloys written by John Ferrante and published by . This book was released on 1970 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface segregation of aluminum has been observed in copper-aluminum alloys by use of LEED and Auger electron spectroscopy studies. The alloys were solid solutions of aluminum in copper having compositions of 1, 5, and 10 atomic percent aluminum. All samples were single crystals oriented in the (111) direction. Surface concentrations five times that in the bulk were observed. LEED and characteristic loss data gave confirming evidence of surface composition changes. Surface concentration increased with temperature on heating to 700 [degree] C.
Book Synopsis Surface Segregation by : J. du Plessis
Download or read book Surface Segregation written by J. du Plessis and published by Trans Tech Publications Ltd. This book was released on 1991-01-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the fundamental aspects of surface segregation theory. The material is presented in a self-contained manner and mathematical procedures are worked through in some cases in order to provide the reader with the necessary opportunity to realize the restrictions under which the expressions are valid.
Book Synopsis Surface Segregationphenomena by : Peter A. Dowben
Download or read book Surface Segregationphenomena written by Peter A. Dowben and published by CRC Press. This book was released on 1990-08-29 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the phenomena associated with the segregation of one element in a multicomponent material. It describes the kinetics of segregation and contains a tabular summary of the pros and cons of the various models. The easy-to-read chapters outline in detail the macroscopic approach and provide an in-depth review of broken-bond models. This comprehensive informative resource also addresses important multicomponent systems. These systems include metals with non-metallic constituents, semiconductor-metal interfaces, steels and steel-related alloys, and real catalysts. Readers of this text will gain a good fundamental understanding and overview of surface, interfacial, and selvedge segregation. Those who have an interest in physics, vacuum science, material science, and chemical, mechanical, and electrical engineering will benefit from this imperative work.
Book Synopsis Thermodynamics of Polymer Blends, Volume I by : Anatoly E. Nesterov
Download or read book Thermodynamics of Polymer Blends, Volume I written by Anatoly E. Nesterov and published by CRC Press. This book was released on 2020-02-03 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamics is an indispensable tool for developing a large and growing fraction of new polymers and polymer blends. These two volumes show the researcher how thermodynamics can be used to rank polymer pairs in order of immiscibility, including the search for suitable chemical structure of compatibilizers. Because of the great current commercial interest in this most dynamic sector of the polymer industry, there is high interest in studying their physical and mechanical properties, their structures, and the processes of their formation and manufacture. These Books are dedicated to Analysis of the Thermodynamics of Polymer Blends. Thermodynamic behavior of blends determines the compatibility of the components, their morphological features, rheological behavior, and microphase structures. As a result, the most important physical and mechanical characteristics of blends can be identified. The information in these two volumes will be useful to all those involved in polymer research, development, analysis and advanced process engineering.
Book Synopsis Electrons In Metals And Alloys by : J. A. Alonso
Download or read book Electrons In Metals And Alloys written by J. A. Alonso and published by Academic Press. This book was released on 2012-12-02 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a broad review of the electronic structure of metals and alloys. It emphasises the way in which the behavior of electrons in these materials governs the thermodynamic and other properties of these conducting materials. The theoretical treatment proceeds from a wave mechanics approach to more sophisticated techniques for the description of the properties of metals and alloys.
Book Synopsis Electrochemical Engineering Across Scales by : Richard C. Alkire
Download or read book Electrochemical Engineering Across Scales written by Richard C. Alkire and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Volume XV in the series "Advances in Electrochemical Science and Engineering" various leading experts from the field of electrochemical engineering share their insights into how different experimental and computational methods are used in transferring molecular-scale discoveries into processes and products. Throughout, the focus is on the engineering problem and method of solution, rather than on the specific application, such that scientists from different backgrounds will benefit from the flow of ideas between the various subdisciplines. A must-read for anyone developing engineering tools for the next-generation design and control of electrochemical process technologies, including chemical, mechanical and electrical engineers, as well as chemists, physicists, biochemists and materials scientists.
Book Synopsis Surfaces and Interfaces of Ceramic Materials by : L.C. Dufour
Download or read book Surfaces and Interfaces of Ceramic Materials written by L.C. Dufour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.
Book Synopsis Auger- and X-Ray Photoelectron Spectroscopy in Materials Science by : Siegfried Hofmann
Download or read book Auger- and X-Ray Photoelectron Spectroscopy in Materials Science written by Siegfried Hofmann and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: To anyone who is interested in surface chemical analysis of materials on the nanometer scale, this book is prepared to give appropriate information. Based on typical application examples in materials science, a concise approach to all aspects of quantitative analysis of surfaces and thin films with AES and XPS is provided. Starting from basic principles which are step by step developed into practically useful equations, extensive guidance is given to graduate students as well as to experienced researchers. Key chapters are those on quantitative surface analysis and on quantitative depth profiling, including recent developments in topics such as surface excitation parameter and backscattering correction factor. Basic relations are derived for emission and excitation angle dependencies in the analysis of bulk material and of fractional nano-layer structures, and for both smooth and rough surfaces. It is shown how to optimize the analytical strategy, signal-to-noise ratio, certainty and detection limit. Worked examples for quantification of alloys and of layer structures in practical cases (e.g. contamination, evaporation, segregation and oxidation) are used to critically review different approaches to quantification with respect to average matrix correction factors and matrix relative sensitivity factors. State-of-the-art issues in quantitative, destructive and non-destructive depth profiling are discussed with emphasis on sputter depth profiling and on angle resolved XPS and AES. Taking into account preferential sputtering and electron backscattering corrections, an introduction to the mixing-roughness-information depth (MRI) model and its extensions is presented.
Download or read book Engineering written by and published by . This book was released on 1914 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Kinetics in Materials Science and Engineering by : Dennis W. Readey
Download or read book Kinetics in Materials Science and Engineering written by Dennis W. Readey and published by CRC Press. This book was released on 2017-01-27 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A pedagogical gem.... Professor Readey replaces ‘black-box’ explanations with detailed, insightful derivations. A wealth of practical application examples and exercise problems complement the exhaustive coverage of kinetics for all material classes." –Prof. Rainer Hebert, University of Connecticut "Prof. Readey gives a grand tour of the kinetics of materials suitable for experimentalists and modellers.... In an easy-to-read and entertaining style, this book leads the reader to fundamental, model-based understanding of kinetic processes critical to development, fabrication and application of commercially-important soft (polymers, biomaterials), hard (ceramics, metals) and composite materials. It is a must-have for anyone who really wants to understand how to make materials and how they will behave in service." --Prof. Bill Lee, Imperial College London, Fellow of the Royal Academy of Engineering "A much needed text filing the gap between an introductory course in materials science and advanced materials-specific kinetics courses. Ideal for the undergraduate interested in an in-depth study of kinetics in materials." –Prof. Mark E. Eberhart, Colorado School of Mines This book provides an in-depth introduction to the most important kinetic concepts in materials science, engineering, and processing. All types of materials are addressed, including metals, ceramics, polymers, electronic materials, biomaterials, and composites. The expert author with decades of teaching and practical experience gives a lively and accessible overview, explaining the principles that determine how long it takes to change material properties and make new and better materials. The chapters cover a broad range of topics extending from the heat treatment of steels, the processing of silicon integrated microchips, and the production of cement, to the movement of drugs through the human body. The author explicitly avoids "black box" equations, providing derivations with clear explanations.
Book Synopsis Nanocrystalline Metals and Oxides by : Philippe Knauth
Download or read book Nanocrystalline Metals and Oxides written by Philippe Knauth and published by Springer Science & Business Media. This book was released on 2002-01-31 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials have at least one dimension in the nanometer range. They became a very active research area in solid state physics and chemistry in recent years with anticipated applications in various domains, including solar cells, electronics, batteries and sensors. Nanocrystalline metals and oxides are dense polycrystalline solids with a mean grain size below 100 nm. This book is intended to give an overview on selected properties and applications of nanocrystalline metals and oxides by leading experts in the field. The first three chapters provide a very complete theoretical treatment of thermodynamics and atom/ion transport for nanocrystalline materials. The following chapters are experts' views on the development of experimental characterization techniques for nanocrystalline solids with emphasis on electroceramic materials. Nanocrystalline Metals and Oxides is intended for a broad range of readers, foremost chemists, physicists and materials scientists. Theoretical physicists and chemists will certainly also profit from this book. The electroceramics and solid state ionics community are particularly addressed, given the main interests of the editors.
Book Synopsis Impurities in Engineering Materials by : Clyde Briant
Download or read book Impurities in Engineering Materials written by Clyde Briant and published by Routledge. This book was released on 2017-09-29 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a state-of-the-art account of the various effects of impurities on the properties of engineering alloys. Outlines a wide range of methods for producing cleaner alloys. Traces the technological advances that allow the economical manufacture of purer materials.
Book Synopsis Grain Boundary Segregation in Metals by : Pavel Lejcek
Download or read book Grain Boundary Segregation in Metals written by Pavel Lejcek and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.
Download or read book Catalysis written by J. J. Spivey and published by Royal Society of Chemistry. This book was released on 2012 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing need to find cost-effective and environmentally sound methods of converting natural resources into fuels, chemicals and energy; catalysts are pivotal to such processes. Catalysis highlights major developments in this area. Coverage of this Specialist Periodical Report includes all major areas of heterogeneous catalysis. n each volume, specific areas of current interest are reviewed. Examples of topics include experimental methods, acid/base catalysis, materials synthesis, environmental catalysis, and syngas conversion.
Book Synopsis Radiotracer Studies of Interfaces by : G. Horanyi
Download or read book Radiotracer Studies of Interfaces written by G. Horanyi and published by Elsevier. This book was released on 2004-09-18 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiotracer Studies of Interfaces presents a selection of examples illustrating the application of radiotracer studies for different types of interfaces. The value of radiotracer studies in fields such as food chemistry, corrosion of metals, neurochemistry, biology and catalysis is revealed. Separate chapters are devoted to the environmental problems connected with nuclear reactors and with the nuclear industry in general. The book also presents efforts to minimize and avoid the risk of radioactive contamination in the environment by describing new approaches to the problem. Demonstrates the use of radiotracers Contains a detailed discussion of double-layer phenomena Separate chapters are devoted to the most important branches of science where radiotracer study of interfacial phenomena plays an important role
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Book Synopsis ULSI Process Integration 6 by : C. Claeys
Download or read book ULSI Process Integration 6 written by C. Claeys and published by The Electrochemical Society. This book was released on 2009-09 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: ULSI Process Integration 6 covers all aspects of process integration. Sections are devoted to 1) Device Technologies, 2) Front-end-of-line integration (gate stacks, shallow junctions, dry etching, etc.), 3) Back-end-of-line integration (CMP, low-k, Cu interconnect, air-gaps, 3D packaging, etc.), 4) Alternative channel technologies (Ge, III-V, hybrid integration), and 5) Emerging technologies (CNT, graphene, polymer electronics, nanotubes).
