Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Strain Rate And Temperature Effects On Strain Rate Sensitivity In Three Dual Phase Sheet Steels
Download Strain Rate And Temperature Effects On Strain Rate Sensitivity In Three Dual Phase Sheet Steels full books in PDF, epub, and Kindle. Read online Strain Rate And Temperature Effects On Strain Rate Sensitivity In Three Dual Phase Sheet Steels ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Strain Rate and Temperature Effects on Strain Rate Sensitivity in Three Dual-phase Sheet Steels by : David W. Barber
Download or read book Strain Rate and Temperature Effects on Strain Rate Sensitivity in Three Dual-phase Sheet Steels written by David W. Barber and published by . This book was released on 1988 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Strain Rate Sensitivity of Automotive Sheet Steels by : Patrick Larour
Download or read book Strain Rate Sensitivity of Automotive Sheet Steels written by Patrick Larour and published by . This book was released on 2010 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis High Strain Rate Characterization of Advanced High Strength Steels by : Alan Thompson
Download or read book High Strain Rate Characterization of Advanced High Strength Steels written by Alan Thompson and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis The Effect of Strain Rate and Temperature on Yielding in Steels by : David P. Kendall
Download or read book The Effect of Strain Rate and Temperature on Yielding in Steels written by David P. Kendall and published by . This book was released on 1970 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of elastic strain rates ranging from 0.001 to 10/sec and temperatures ranging from 200K ( -100F) to 590K (600F) on the yield strength of several steels is reported. The steels utilized are a 1018 mild steel, 4340 steel, H-11 tool steel and 300 grade maraging steel. The results are interpreted in terms of the Cottrel-Bilby yielding model based on release of dislocations from locking carbon atmospheres. The results for all of the materials except the maraging steel are consistent with this model if it is modified to account for re-locking of dislocations by migration of carbon atoms. The maraging steel shows a constant strain rate sensitivity at a constant temperature, over the range of strain rates investigated. This rate sensitivity decreases with increasing temperature and at 590K (600 F) a decreasing strength with increasing strain rate is found. This is attributed to stress aging effects. (Author).
Book Synopsis Microstructural and Strain Rate Effects on Stage III Strain Hardening and Ductility in Dual Phase Steels by : Michael S. Nagorka
Download or read book Microstructural and Strain Rate Effects on Stage III Strain Hardening and Ductility in Dual Phase Steels written by Michael S. Nagorka and published by . This book was released on 1986 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Strain Rate and Strain Rate History Effects in Two Mild Steels by : M. L. Wilson
Download or read book Strain Rate and Strain Rate History Effects in Two Mild Steels written by M. L. Wilson and published by . This book was released on 1979 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results are presented of a series of experiments performed with two steels to investigate the dependence of flow stress on strain rate and its history. For this purpose quasi-static, dynamic and incremental strain rate tests were conducted on SAE 1020 hot-rolled steel and SAE 1018 cold-rolled steel at room temperature. It is shown that while the flow stress of both steels exhibits a significant strain rate sensitivity, the effect of strain rate history is relatively small in comparison with that generally found in fcc and hcp metals. A comparison is made with results of the work of other investigators. (Author).
Book Synopsis Effect of Strain Rate on Material Properties of Sheet Steels and Structural Strengths of Cold-formed Steel Members by : Maher Kassar
Download or read book Effect of Strain Rate on Material Properties of Sheet Steels and Structural Strengths of Cold-formed Steel Members written by Maher Kassar and published by . This book was released on 1990 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In structural design, the material properties of steels and the strengths of cold-formed steel members are affected by strain rate. Two subjects were investigated experimentally and analytically in this study. They are 1) effect of strain rate on mechanical properties of sheet steels in tension and compression, and 2) structural strengths of stub columns and beams subjected to dynamic loads. Three sheet steels with nominal yield strengths ranging from 35 to 100 ksi were studied under different strain rates. A total of 124 tensile coupons and 54 compressive coupons were tested in this phase of study. The structural strengths of 37 stub columns and 30 beam specimens fabricated from 35XF sheet steel were investigated in the second phase of this study under different strain rates. The results showed that the material properties as well as the strengths of the structural members increased with the strain rate. The amount of increase was found to be dependent on the material yield strengths and the strain rates used in the tests. The effective width approach included in the current AISI Automotive Steel Design Manual was utilized for the evaluation of member strengths using static and dynamic yield stresses corresponding to the strain rates used in the tests. Good agreement was achieved between the predicted and tested member strengths when using the dynamic yield stresses in the comparison"--Abstract, leaf iii.
Book Synopsis Viscoelastic Properties of Polymers by : John D. Ferry
Download or read book Viscoelastic Properties of Polymers written by John D. Ferry and published by John Wiley & Sons. This book was released on 1980-09-16 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelastic behavior reflects the combined viscous and elastic responses, under mechanical stress, of materials which are intermediate between liquids and solids in character. Polymers the basic materials of the rubber and plastic industries and important to the textile, petroleum, automobile, paper, and pharmaceutical industries as well exhibit viscoelasticity to a pronounced degree. Their viscoelastic properties determine the mechanical performance of the final products of these industries, and also the success of processing methods at intermediate stages of production. Viscoelastic Properties of Polymers examines, in detail, the effects of the many variables on which the basic viscoelastic properties depend. These include temperature, pressure, and time; polymer chemical composition, molecular weight and weight distribution, branching and crystallinity; dilution with solvents or plasticizers; and mixture with other materials to form composite systems. With guidance by molecular theory, the dependence of viscoelastic properties on these variables can be simplified by introducing certain ancillary concepts such as the fractional free volume, the monomeric friction coefficient, and the spacing between entanglement loci, to provide a qualitative understanding and in many cases a quantitative prediction of how to achieve desired results. The phenomenological theory of viscoelasticity which permits interrelation of the results of different types of experiments is presented first, with many useful approximation procedures for calculations given. A wide variety of experimental methods is then described, with critical evaluation of their applicability to polymeric materials of different consistencies and in different regions of the time scale (or, for oscillating deformations, the frequency scale). A review of the present state of molecular theory follows, so that viscoelasticity can be related to the motions of flexible polymer molecules and their entanglements and network junctions. The dependence of viscoestic properties on temperature and pressure, and its descriptions using reduced variables, are discussed in detail. Several chapters are then devoted to the dependence of viscoelastic properties on chemical composition, molecular weight, presence of diluents, and other features, for several characteristic classes of polymer materials. Finally, a few examples are given to illustrate the many potential applications of these principles to practical problems in the processing and use of rubbers, plastics, and fibers, and in the control of vibration and noise. The third edition has been brought up to date to reflect the important developments, in a decade of exceptionally active research, which have led to a wider use of polymers, and a wider recognition of the importance and range of application of viscoelastic properties. Additional data have been incorporated, and the book s chapters on dilute solutions, theory of undiluted polymers, plateau and terminal zones, cross-linked polymers, and concentrated solutions have been extensively rewritten to take into account new theories and new experimental results. Technical managers and research workers in the wide range of industries in which polymers play an important role will find that the book provides basic information for practical applications, and graduate students in chemistry and engineering will find, in its illustrations with real data and real numbers, an accessible introduction to the principles of viscoelasticity.
Book Synopsis Masters Theses in the Pure and Applied Sciences by : Wade H. Shafer
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Book Synopsis Strain Rate Effects and Temperature History Effects for Three Different Tempers of 4340 VAR Steel by : S. Tanimura
Download or read book Strain Rate Effects and Temperature History Effects for Three Different Tempers of 4340 VAR Steel written by S. Tanimura and published by . This book was released on 1984 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Materials at High Strain Rates by : T.Z. Blazynski
Download or read book Materials at High Strain Rates written by T.Z. Blazynski and published by Springer Science & Business Media. This book was released on 1987-07-31 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis The Effect of Strain Rate on Yielding in High-strength Steels by : David P. Kendall
Download or read book The Effect of Strain Rate on Yielding in High-strength Steels written by David P. Kendall and published by . This book was released on 1966 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of strain rates ranging from 0.0001 to 10 in/in/sec. on the yield strengths of several high strength alloy steels is investigated. Quenched and tempered type alloys exhibit two regions of strain rate sensitivity with the strain rate dividing the sensitive and insensitive regions varying from 0.5 to greater than 10 in/in/sec, depending on composition, microstructure and grain size. At the higher rates a power law relationship is found which is consistent with a yielding model involving breakaway of dislocations from solute atmospheres. Maraging steel exhibits a continuous power law strain rate sensitivity over the entire range. (Author).
Book Synopsis The Causes of "shear Fracture" of Dual-phase Steels by : Ji-Hyun Sung
Download or read book The Causes of "shear Fracture" of Dual-phase Steels written by Ji-Hyun Sung and published by . This book was released on 2010 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Dual Phase (DP) steels are a class of advanced high strength steel (AHSS) in increasing use for sheet formed automotive parts. In spite of attractive combinations of high strength, high ductility, and low cost, the widespread adoption of DP steels has been limited because practical die tryouts exhibit forming failures far earlier than predicted by standard industrial methods. These failures, often referred to as "shear fractures," occur in regions of high curvature and with little apparent necking, in contrast to "normal" or tensile fractures. Conventional wisdom attributes shear fractures to a postulated damage mechanism related to the special microstructure of DP steels. In order to reproduce, characterize, and analyze such fractures in a laboratory setting and to understand their origin of the inability to predict them, a novel draw-bend formability (DBF) test was devised based on displacement control. DP steels from several suppliers with tensile strengths ranging from 590 to 980 MPa were tested over a range of rates and bend ratios (R/t, inner bend radius / sheet thickness). The new DBF test reliably reproduced three kinds of fractures identified as Type I, II, and III, corresponding to tensile fracture, transitional fracture, and shear fracture, respectively. These tests revealed a surprising result: the occurrence of shear fractures increased at higher deformation rates. This degradation of formability was shown to be principally a result of deformation-induced heating, which is greatly accentuated for AHSS because of their high plastic energy absorption and commensurate high temperature increases, up to 100 degrees C. In order to understand and quantify the role of deformation-induced heating on plastic localization, temperatures were measured and simulated using a novel new empirical plasticity constitutive form describing the flow stress as a function of strain, strain-rate, and temperature. Designated the "H/V model", the new constitutive model consists of three multiplicative functions describing (a) strain hardening and its temperature sensitivity, (b) strain-rate sensitivity, and (c) temperature sensitivity. This form allows a natural transition from unbounded strain hardening at low temperatures toward saturation behavior at higher temperatures, consistent with many observations. Thermo-mechanical finite-element simulations using the H/V model confirmed its accuracy and the magnitude of the role on shear fracture. Failure types were predicted, as well as quantitative. For most of the DP steels tested, heating induced by deformation was identified as the dominant effect in producing unpredicted fractures. This is a result of standard industrial techniques that do not take non-isothermal effect into account, in particular constructing forming limit diagrams from low-speed / isothermal testing, and use of isothermal finite element modeling to analyze industrial sheet forming operations. Microstructural damage can also contribute to shear fracture, but it was a secondary factor for all but one of the alloys tested, in one test direction.
Book Synopsis Effects of Strain Rate and Temperature on the Mechanical Behavior of Advanced High Strength Steels by : Mikko Hokka
Download or read book Effects of Strain Rate and Temperature on the Mechanical Behavior of Advanced High Strength Steels written by Mikko Hokka and published by . This book was released on 2008 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Strain-rate Sensitivity of Hot-rolled Sheets of DQSK, USS EX-TEN F50, and USS Dual Phase 80 Steels by : C. C. Skena
Download or read book Strain-rate Sensitivity of Hot-rolled Sheets of DQSK, USS EX-TEN F50, and USS Dual Phase 80 Steels written by C. C. Skena and published by . This book was released on 1980 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Fundamentals of Creep in Metals and Alloys by : Michael E. Kassner
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world’s leading investigators. · Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1950 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
