Lead Slowing Down Spectrometer Research Plans

Author :
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (16 download)

DOWNLOAD NOW!

Download or read book Lead Slowing-Down Spectrometry for Spent Fuel Assay written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Executive Summary The Office of Nuclear Energy, Fuel Cycle R & D, Material Protection and Control Technology (MPACT) Campaign is supporting a multi-institutional collaboration to study the feasibility of using Lead Slowing Down Spectroscopy (LSDS) to conduct direct, independent and accurate assay of fissile isotopes in used fuel assemblies. The collaboration consists of Pacific Northwest National Laboratory (PNNL), Los Alamos National Laboratory (LANL), Rensselaer Polytechnic Institute (RPI), Idaho State University (ISU). There are three main challenges to implementing LSDS to assay used fuel assemblies. These challenges are the development of an algorithm for interpreting the data with an acceptable accuracy for the fissile masses, the development of suitable detectors for the technique, and the experimental benchmarking of the approach. This report is a summary of the progress in these areas made by the collaboration during FY2012. Significant progress was made on the project in FY2012. Extensive characterization of a?semi-empirical? algorithm was conducted. For example, we studied the impact on the accuracy of this algorithm by the minimization of the calibration set, uncertainties in the calibration masses, and by the choice of time window. Issues such a lead size, number of required neutrons, placement of the neutron source and the impact of cadmium around the detectors were also studied. In addition, new algorithms were developed that do not require the use of plutonium fission chambers. These algorithms were applied to measurement data taken by RPI and shown to determine the 235U mass within 4%. For detectors, a new concept for a fast neutron detector involving 4He recoil from neutron scattering was investigated. The detector has the potential to provide a couple of orders of magnitude more sensitivity than 238U fission chambers. Progress was also made on the more conventional approach of using 232Th fission chambers as fast neutron detectors. For benchmarking measurements, we continue to improve our understanding of the experimental setup by studying issues such as the effect of room return and impurities in the lead. RPI performed a series of experiments with a fresh fuel pin and various 235U and 239Pu sources. A comparison between simulations and measurements shows significant deviations after 200 æs for both 235U and 239Pu samples, as well as significant deviations at earlier times for the 239Pu sample. The FY2013 effort will shift focus to planning for a Technical Readiness Level 5 demonstration. The primary deliverable for the year will be a plan on how to do this demonstration. The plan will include measurement design, sample acquisition, sample handling, cost estimate, schedule and assumptions. Research will continue on the 4He detector, algorithms development, thorium fission chambers and benchmarking measurements involving sub assemblies of fresh fuel.