Increasing The Efficiency Of Si Engines By Spark Advance Control And Water Injection

Download Increasing The Efficiency Of Si Engines By Spark Advance Control And Water Injection full books in PDF, epub, and Kindle. Read online Increasing The Efficiency Of Si Engines By Spark Advance Control And Water Injection ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Knocking in Gasoline Engines

Author : Michael Günther
Publisher : Springer
ISBN 13 : 3319697609
Total Pages : 381 pages
Book Rating : 4.3/5 (196 download)

DOWNLOAD NOW!

Book Synopsis Knocking in Gasoline Engines by : Michael Günther

Download or read book Knocking in Gasoline Engines written by Michael Günther and published by Springer. This book was released on 2017-11-21 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the papers presented at the conference discussing approaches to prevent or reliably control knocking and other irregular combustion events. The majority of today’s highly efficient gasoline engines utilize downsizing. High mean pressures produce increased knocking, which frequently results in a reduction in the compression ratio at high specific powers. Beyond this, the phenomenon of pre-ignition has been linked to the rise in specific power in gasoline engines for many years. Charge-diluted concepts with high compression cause extreme knocking, potentially leading to catastrophic failure. The introduction of RDE legislation this year will further grow the requirements for combustion process development, as residual gas scavenging and enrichment to improve the knock limit will be legally restricted despite no relaxation of the need to reach the main center of heat release as early as possible. New solutions in thermodynamics and control engineering are urgently needed to further increase the efficiency of gasoline engines.

Assessment of Fuel Economy Technologies for Light-Duty Vehicles

Author : National Research Council
Publisher : National Academies Press
ISBN 13 : 0309216389
Total Pages : 373 pages
Book Rating : 4.3/5 (92 download)

DOWNLOAD NOW!

Book Synopsis Assessment of Fuel Economy Technologies for Light-Duty Vehicles by : National Research Council

Download or read book Assessment of Fuel Economy Technologies for Light-Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Advances in Internal Combustion Engine Research

Author : Dhananjay Kumar Srivastava
Publisher : Springer
ISBN 13 : 9811075751
Total Pages : 346 pages
Book Rating : 4.8/5 (11 download)

DOWNLOAD NOW!

Book Synopsis Advances in Internal Combustion Engine Research by : Dhananjay Kumar Srivastava

Download or read book Advances in Internal Combustion Engine Research written by Dhananjay Kumar Srivastava and published by Springer. This book was released on 2017-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses all aspects of advanced engine technologies, and describes the role of alternative fuels and solution-based modeling studies in meeting the increasingly higher standards of the automotive industry. By promoting research into more efficient and environment-friendly combustion technologies, it helps enable researchers to develop higher-power engines with lower fuel consumption, emissions, and noise levels. Over the course of 12 chapters, it covers research in areas such as homogeneous charge compression ignition (HCCI) combustion and control strategies, the use of alternative fuels and additives in combination with new combustion technology and novel approaches to recover the pumping loss in the spark ignition engine. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.

Advances in Automotive Control 1998

Author : G. Rizzoni
Publisher : Pergamon
ISBN 13 :
Total Pages : 270 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Advances in Automotive Control 1998 by : G. Rizzoni

Download or read book Advances in Automotive Control 1998 written by G. Rizzoni and published by Pergamon. This book was released on 1998 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the 2nd IFAC Workshop on Advances in Automotive Control, the theme of which was control of automotive systems. Eighty delegates participated in the Workshop, presenting a total of thirty-nine papers. Several technical demonstrations were available on-site. Two plenary lectures presented by industry experts opened each of the two full days of the Workshop, which was capped by a panel discussion with industry and university participants. These Proceedings comprise high quality technical papers on five distinct subjects: control of vehicle systems; control of intelligent transportation systems; control of hybrid-electric powertrains; powertrain modeling and estimation; and powertrain control.

Reciprocating Engine Combustion Diagnostics

Author : Rakesh Kumar Maurya
Publisher : Springer
ISBN 13 : 3030119548
Total Pages : 625 pages
Book Rating : 4.0/5 (31 download)

DOWNLOAD NOW!

Book Synopsis Reciprocating Engine Combustion Diagnostics by : Rakesh Kumar Maurya

Download or read book Reciprocating Engine Combustion Diagnostics written by Rakesh Kumar Maurya and published by Springer. This book was released on 2019-03-19 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-cylinder pressure measurement and its post-processing for combustion quality analysis of conventional and advanced reciprocating engines. It offers insight into knocking and combustion stability analysis techniques and algorithms in SI, CI, and LTC engines, and places special emphasis on the digital signal processing of in-cylinder pressure signal for online and offline applications. The text gives a detailed description on sensors for combustion measurement, data acquisition, and methods for estimation of performance and combustion parameters. The information provided in this book enhances readers’ basic knowledge of engine combustion diagnostics and serves as a comprehensive, ready reference for a broad audience including graduate students, course instructors, researchers, and practicing engineers in the automotive, oil and other industries concerned with internal combustion engines.

Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles

Author : National Research Council
Publisher : National Academies Press
ISBN 13 : 0309373913
Total Pages : 812 pages
Book Rating : 4.3/5 (93 download)

DOWNLOAD NOW!

Book Synopsis Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles by : National Research Council

Download or read book Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Introduction to Modeling and Control of Internal Combustion Engine Systems

Author : Lino Guzzella
Publisher : Springer Science & Business Media
ISBN 13 : 3662080036
Total Pages : 303 pages
Book Rating : 4.6/5 (62 download)

DOWNLOAD NOW!

Book Synopsis Introduction to Modeling and Control of Internal Combustion Engine Systems by : Lino Guzzella

Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.

Engines and Fuels for Future Transport

Author : Gautam Kalghatgi
Publisher : Springer Nature
ISBN 13 : 981168717X
Total Pages : 403 pages
Book Rating : 4.8/5 (116 download)

DOWNLOAD NOW!

Book Synopsis Engines and Fuels for Future Transport by : Gautam Kalghatgi

Download or read book Engines and Fuels for Future Transport written by Gautam Kalghatgi and published by Springer Nature. This book was released on 2021-12-13 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on clean transport and mobility essential to the modern world. It discusses internal combustion engines (ICEs) and alternatives like battery electric vehicles (BEVs) which are growing fast. Alternatives to ICEs start from a very low base and face formidable environmental, material availability, and economic challenges to unlimited and rapid growth. Hence ICEs will continue to be the main power source for transport for decades to come and have to be continuously improved to improve transport sustainability. The book highlights the need to assess proposed changes in the existing transport system on a life cycle basis. The volume includes chapters discussing the challenges faced by ICEs as well as chapters on novel fuels and fuel/ engine interactions which help in this quest to improve the efficiency of ICE and reduce exhaust pollutants. This book will be of interest to those in academia and industry alike.

Investigation of Innovative Water Injection Strategies for Gasoline Engines by Means of a 3D-CFD Virtual Engine Test Bench

Author : Edoardo Rossi
Publisher : Springer Nature
ISBN 13 : 3658449411
Total Pages : 185 pages
Book Rating : 4.6/5 (584 download)

DOWNLOAD NOW!

Book Synopsis Investigation of Innovative Water Injection Strategies for Gasoline Engines by Means of a 3D-CFD Virtual Engine Test Bench by : Edoardo Rossi

Download or read book Investigation of Innovative Water Injection Strategies for Gasoline Engines by Means of a 3D-CFD Virtual Engine Test Bench written by Edoardo Rossi and published by Springer Nature. This book was released on 2024 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the investigation of innovative engine technologies that can improve the efficiency of internal combustion engines and reduce their environmental impact. In particular, water injection is examined as a means of improving engine behavior. The possible combination of water injection with renewable fuels is also a topic of the book. The results of this experimental and numerical research show positive results that can be used for further research and development of engines. Content 3D-CFD Simulation Environment: the Virtual Engine Test Bench Experimental Spray Analysis and 3D-CFD Injection Model Calibration Applicability of Water Injection in Combination with an eFuel Water-in-Fuel Emulsions at the Virtual Engine Test Bench Target Groups Students and researchers in the field of automotive engineering, esp. engine technology Engineers in the automotive industry About the Author Edoardo Rossi is a project manager in the virtual engine development department at the FKFS, where he did his PhD. He works on innovative solutions for future powertrain technologies for motor vehicles. .

1D and Multi-D Modeling Techniques for IC Engine Simulation

Author : Angelo Onorati
Publisher : SAE International
ISBN 13 : 0768099528
Total Pages : 552 pages
Book Rating : 4.7/5 (68 download)

DOWNLOAD NOW!

Book Synopsis 1D and Multi-D Modeling Techniques for IC Engine Simulation by : Angelo Onorati

Download or read book 1D and Multi-D Modeling Techniques for IC Engine Simulation written by Angelo Onorati and published by SAE International. This book was released on 2020-04-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1D and Multi-D Modeling Techniques for IC Engine Simulation provides a description of the most significant and recent achievements in the field of 1D engine simulation models and coupled 1D-3D modeling techniques, including 0D combustion models, quasi-3D methods and some 3D model applications.

Ignition Systems for Gasoline Engines

Author : Michael Günther
Publisher : Springer
ISBN 13 : 3319455044
Total Pages : 324 pages
Book Rating : 4.3/5 (194 download)

DOWNLOAD NOW!

Book Synopsis Ignition Systems for Gasoline Engines by : Michael Günther

Download or read book Ignition Systems for Gasoline Engines written by Michael Günther and published by Springer. This book was released on 2016-11-18 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes selected and reviewed papers from the 3rd Conference on Ignition Systems for Gasoline Engines in Berlin in November 2016. Experts from industry and universities discuss in their papers the challenges to ignition systems in providing reliable, precise ignition in the light of a wide spread in mixture quality, high exhaust gas recirculation rates and high cylinder pressures. Classic spark plug ignition as well as alternative ignition systems are assessed, the ignition system being one of the key technologies to further optimizing the gasoline engine.

Internal Combustion Engine Fundamentals

Author : John B. Heywood
Publisher : McGraw-Hill Education
ISBN 13 : 9780071004992
Total Pages : 930 pages
Book Rating : 4.0/5 (49 download)

DOWNLOAD NOW!

Book Synopsis Internal Combustion Engine Fundamentals by : John B. Heywood

Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.

Advancement in Oxygenated Fuels for Sustainable Development

Author : Niraj Kumar
Publisher : Elsevier
ISBN 13 : 0323908764
Total Pages : 414 pages
Book Rating : 4.3/5 (239 download)

DOWNLOAD NOW!

Book Synopsis Advancement in Oxygenated Fuels for Sustainable Development by : Niraj Kumar

Download or read book Advancement in Oxygenated Fuels for Sustainable Development written by Niraj Kumar and published by Elsevier. This book was released on 2022-11-09 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Oxygenated Fuels for Sustainable Development: Feedstocks and Precursors for Catalysts Synthesis provides a roadmap to the sustainable implementation of oxygenated fuels in internal combustion engines through sustainable production, smart distribution and effective utilization. Focusing on the sustainability of feedstocks, the book assesses availability, emissions impact and reduction potential, and biodiversity and land utilization impact. Existing technologies and supply chains are reviewed, and recommendations are provided on how to sustainably implement or update these technologies, including for rural communities. Furthermore, effective supply and distribution network designs are provided alongside methods for monitoring and assessing their sustainability, accounting for social, economic, environmental and ecological factors. This book guides readers through every aspect of the production and commercialization of sustainable oxygenated fuels for internal combustion engines and their implementation across the global transport industry. - Provides multilevel perspectives on how to facilitate the sustainable production of oxygenated fuel and develop new indices for measuring the effectiveness and sustainability of implementation - Recommends a framework and criteria for assessing the suitability, sustainability, and environmental benefits of oxygenated biofuels - Describes the fuel properties of all oxygenated fuels and their performance in unmodified and enhanced CI and SI engines

Internal Combustion Engines

Author : Colin R. Ferguson
Publisher : John Wiley & Sons
ISBN 13 : 1118926374
Total Pages : 477 pages
Book Rating : 4.1/5 (189 download)

DOWNLOAD NOW!

Book Synopsis Internal Combustion Engines by : Colin R. Ferguson

Download or read book Internal Combustion Engines written by Colin R. Ferguson and published by John Wiley & Sons. This book was released on 2015-07-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the Second Edition in 2001, there have been considerable advances and developments in the field of internal combustion engines. These include the increased importance of biofuels, new internal combustion processes, more stringent emissions requirements and characterization, and more detailed engine performance modeling, instrumentation, and control. There have also been changes in the instructional methodologies used in the applied thermal sciences that require inclusion in a new edition. These methodologies suggest that an increased focus on applications, examples, problem-based learning, and computation will have a positive effect on learning of the material, both at the novice student, and practicing engineer level. This Third Edition mirrors its predecessor with additional tables, illustrations, photographs, examples, and problems/solutions. All of the software is ‘open source’, so that readers can see how the computations are performed. In addition to additional java applets, there is companion Matlab code, which has become a default computational tool in most mechanical engineering programs.

Advanced Direct Injection Combustion Engine Technologies and Development

Author : H Zhao
Publisher : Elsevier
ISBN 13 : 1845697324
Total Pages : 325 pages
Book Rating : 4.8/5 (456 download)

DOWNLOAD NOW!

Book Synopsis Advanced Direct Injection Combustion Engine Technologies and Development by : H Zhao

Download or read book Advanced Direct Injection Combustion Engine Technologies and Development written by H Zhao and published by Elsevier. This book was released on 2014-01-23 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct injection enables precise control of the fuel/air mixture so that engines can be tuned for improved power and fuel economy, but ongoing research challenges remain in improving the technology for commercial applications. As fuel prices escalate DI engines are expected to gain in popularity for automotive applications. This important book, in two volumes, reviews the science and technology of different types of DI combustion engines and their fuels. Volume 1 deals with direct injection gasoline and CNG engines, including history and essential principles, approaches to improved fuel economy, design, optimisation, optical techniques and their applications. - Reviews key technologies for enhancing direct injection (DI) gasoline engines - Examines approaches to improved fuel economy and lower emissions - Discusses DI compressed natural gas (CNG) engines and biofuels

Engine Combustion Instrumentation and Diagnostics

Author : Hua Zhao
Publisher : SAE International
ISBN 13 : 0768040345
Total Pages : 854 pages
Book Rating : 4.7/5 (68 download)

DOWNLOAD NOW!

Book Synopsis Engine Combustion Instrumentation and Diagnostics by : Hua Zhao

Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.

Review of the 21st Century Truck Partnership

Author : National Research Council
Publisher : National Academies Press
ISBN 13 : 0309122082
Total Pages : 130 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Review of the 21st Century Truck Partnership by : National Research Council

Download or read book Review of the 21st Century Truck Partnership written by National Research Council and published by National Academies Press. This book was released on 2008-10-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.