Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Helium Bubble Formation In Ultrafine And Nanocrystalline Tungsten Under Different Extreme Conditions
Download Helium Bubble Formation In Ultrafine And Nanocrystalline Tungsten Under Different Extreme Conditions full books in PDF, epub, and Kindle. Read online Helium Bubble Formation In Ultrafine And Nanocrystalline Tungsten Under Different Extreme Conditions ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Helium Bubble Formation in Ultrafine and Nanocrystalline Tungsten Under Different Extreme Conditions by :
Download or read book Helium Bubble Formation in Ultrafine and Nanocrystalline Tungsten Under Different Extreme Conditions written by and published by . This book was released on 2014 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: We investigated the effects of helium ion irradiation energy and sample temperature on the performance of grain boundaries as helium sinks in ultrafine grained and nanocrystalline tungsten. Irradiations were performed at displacement and non-displacement energies and at temperatures above and below that required for vacancy migration. Microstructural investigations were performed using Transmission Electron Microscopy (TEM) combined with either in-situ or ex-situ ion irradiation. Under helium irradiation at an energy which does not cause atomic displacements in tungsten (70 eV), regardless of temperature and thus vacancy migration conditions, bubbles were uniformly distributed with no preferential bubble formation on grain boundaries. Moreover, at energies that can cause displacements, bubbles were observed to be preferentially formed on the grain boundaries only at high temperatures where vacancy migration occurs. Under these conditions, the decoration of grain boundaries with large facetted bubbles occurred on nanocrystalline grains with dimensions less than 60 nm. Finally, we discuss the importance of vacancy supply and the formation and migration of radiation-induced defects on the performance of grain boundaries as helium sinks and the resulting irradiation tolerance of ultrafine grained and nanocrystalline tungsten to bubble formation.
Book Synopsis Helium-induced Bubble Formation in Ultrafine and Nanocrystalline Tungsten Under Different Extreme Conditions by :
Download or read book Helium-induced Bubble Formation in Ultrafine and Nanocrystalline Tungsten Under Different Extreme Conditions written by and published by . This book was released on 2014 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Helium Nano-bubble Formation in Tungsten by : Matt Thompson
Download or read book Helium Nano-bubble Formation in Tungsten written by Matt Thompson and published by Springer. This book was released on 2018-08-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This PhD thesis characterises the damage that occurs in tungsten when it is exposed to a fusion-like environment. The book presents pioneering work on the use of grazing-incidence small-angle X-ray scattering (GISAXS) to measure nano-bubble formation in tungsten exposed to helium plasma. The phenomenon of nanoscale bubble formation within metals during helium plasma exposure can lead to undesirable changes in the material properties, such as complex nanoscale surface modification or a reduction in thermal conductivity. As a result of this work, it is now possible to quantify how nanobubble behaviour changes within different materials, and under different plasma conditions. In 2015 the author published the first GISAXS study of helium-induced nanobubble formation in tungsten, demonstrating the viability of using GISAXS for this work. This paper has generated significant interest from the international fusion community and was selected as one of the highlights for the journal Nuclear Fusion.
Book Synopsis Radiation Damage in Materials by : Yongqiang Wang
Download or read book Radiation Damage in Materials written by Yongqiang Wang and published by MDPI. This book was released on 2020-12-28 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of radiation damage effects in materials that are used in various irradiation environments stems from the fundamental particle–solid interactions and the subsequent damage recovery dynamics after the collision cascades, which involves multiple length and time scales. Adding to this complexity are the transmuted impurities that are unavoidable from accompanying nuclear processes. Helium is one such impurity that plays an important and unique role in controlling the microstructure and properties of materials used in fast fission reactors, plasma-facing and structural materials in fusion devices, spallation neutron target designs, actinides, tritium-containing materials, and nuclear waste. Their ultra-low solubility in virtually all solids forces He atoms to self-precipitate into small bubbles that become nucleation sites for further void growth under radiation-induced vacancy supersaturations, resulting in material swelling and high-temperature He embrittlement, as well as surface blistering under low-energy and high-flux He bombardment. This Special Issue, “Radiation Damage in Materials—Helium Effects”, contains review articles and full-length papers on new irradiation material research activities and novel material ideas using experimental and/or modeling approaches. These studies elucidate the interactions of helium with various extreme environments and tailored nanostructures, as well as their impact on microstructural evolution and material properties.
Book Synopsis Atomic Defects in Metals / Atomare Fehlstellen in Metallen by : H. Ullmaier
Download or read book Atomic Defects in Metals / Atomare Fehlstellen in Metallen written by H. Ullmaier and published by Springer. This book was released on 1991-09-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic or point defects are disturbances of the periodicity of the crystal lattice extending over only a few atomic distances. Many physical and mechanical properties of solids are sensitive to their presence. Furthermore other defects which are crucial to material behaviour are influenced by their interaction with atomic defects. A detailed knowledge of production mechanisms and properties of point defects is therefore essential for assessing and for understanding the atomistic as well as the macroscopic behaviour of materials. As a result of the use of new research methods in recent years, such information is now available for almost all pure metals, for many dilute alloys and for some concentrated alloys. However, a critical and comprehensive collection of these data has so far been missing. The aim of the present volume is to close this gap by sifting, evaluating and compiling data on vacancies and self-interstitial atoms in solid metals. A chapter on the element helium is included because of the exeptional position of He as an "alloying" element and its role in radiation damage phenomena.
Book Synopsis Laser Ablation in Liquids by : Guowei Yang
Download or read book Laser Ablation in Liquids written by Guowei Yang and published by CRC Press. This book was released on 2012-02-22 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental concepts and physical and chemical aspects of pulsed laser ablation of solid targets in liquid environments and its applications in the preparation of nanomaterials and fabrication of nanostructures. The areas of focus include basic thermodynamic and kinetic processes of laser ablation in liquids, and its applic
Book Synopsis Fundamentals of Radiation Materials Science by : GARY S. WAS
Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.
Book Synopsis Electrophoretic Deposition of Nanomaterials by : James H. Dickerson
Download or read book Electrophoretic Deposition of Nanomaterials written by James H. Dickerson and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary basic research, emerging technology, and commercial and industrial applications associated with the electrophoretic deposition of nanomaterials. This presentation of the subject includes an historical survey, the underlying theory of electrophoresis, dielectrophoresis, and the colloidal deposition of materials. This is followed by an assessment of the experimental equipment and procedures for electrophoretic and dielectrophoretic aggregation, manipulation, and deposition of nanoparticles, nanotubes, and other nanomaterials. Additional chapters explore the specific science and technology of electrophoretic film formation, using widely studied and application-driven nanomaterials, such as carbon nanotubes, luminescent nanocrystals, and nano-ceramics. The concluding chapters explore industrial applications and procedures associated with electrophoretic deposition of nanomaterials.
Book Synopsis Metal Foams: A Design Guide by : Michael F. Ashby
Download or read book Metal Foams: A Design Guide written by Michael F. Ashby and published by Elsevier. This book was released on 2000-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal foams are at the forefront of technological development for the automotive, aerospace, and other weight-dependent industries. They are formed by various methods, but the key facet of their manufacture is the inclusion of air or other gaseous pockets in the metal structure. The fact that gas pockets are present in their structure provides an obvious weight advantage over traditionally cast or machined solid metal components. The unique structure of metal foams also opens up more opportunities to improve on more complex methods of producing parts with space inclusions such as sand-casting. This guide provides information on the advantages metal foams possess, and the applications for which they may prove suitable. Offers a concise description of metal foams, their manufacture, and their advantages in industry Provides engineers with answers to pertinent questions surrounding metal foams Satisfies a major need in the market for information on the properties, performance, and applications of these materials
Download or read book Tungsten written by Erik Lassner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why does someone write a book about Tungsten? There are several reasons and precedents for this, the most important of which is that the last book on tungsten was written more than 20 years ago, in 1977, by St. W H. Yih and Ch T. Wang. During the intervening period there have been many new scientific and technological developments and innova tions, so it was not only our opinion but the view of many other members of the "tungsten family" that it was time to start writing a new book about tungsten. Preparations of the new book began in 1994. further impetus to the project was provided by the realization that in spite of this new knowledge having been presented at seminars or published in the technical press, a general acknowledgement of it by the majority of technicians and scientists is still far from being realized. It is our hope that this book will significantly contribute to a broader acceptance of recent scientific and technological innovations. An important prerequisite for such a project is the availability of a recently retired, experienced person willing to devote his time and talents to the tedious part of the exercise.
Book Synopsis Progress in Fine Particle Plasmas by : Tetsu Mieno
Download or read book Progress in Fine Particle Plasmas written by Tetsu Mieno and published by BoD – Books on Demand. This book was released on 2020-08-26 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of plasma physics, plasmas (including charged fine particles) have been actively studied for more than 40 years, and special features of wave phenomena, self-organizations of the particles, potential formations, fluid-like motions of the particles, generations of fine particles in the plasmas, etc. have been investigated. Here, these plasmas are called “fine particle plasmas”, which are also called “dusty plasmas” and “complex plasmas”. This book intends to provide the reader with the recent progress of studies of fine particle plasmas from the viewpoints of wide and interdisciplinary directions, such as self-organized fine particles, Coulomb crystal formation, behaviors of fine particles, their stability, and syntheses of nano-sized particles in reactive plasmas. Further, the phenomena of dense grain particles and the effects of massive neutrinos in galaxy clustering are included.
Book Synopsis SRIM, the Stopping and Range of Ions in Matter by : James F. Ziegler
Download or read book SRIM, the Stopping and Range of Ions in Matter written by James F. Ziegler and published by Lulu.com. This book was released on 2008 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is a textbook the gives the background of the stopping and range of ions in matter (www.SRIM.org). It is written to be the prime resource for those who use SRIM in scientific work."--Lulu.com.
Download or read book Hot Embossing written by Matthias Worgull and published by William Andrew. This book was released on 2009-09-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade.The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication. A practical and theoretical guide to selecting the materials, machinery and processes involved in microreplication using hot embossing techniques Compares different replication processes such as: micro injection molding, micro thermoforming, micro hot embossing, and nanoimprinting Details commercially available hot embossing machinery and components like tools and mold inserts
Book Synopsis Characterization of Minerals, Metals, and Materials 2019 by : Bowen Li
Download or read book Characterization of Minerals, Metals, and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
Book Synopsis Degradation of Implant Materials by : Noam Eliaz
Download or read book Degradation of Implant Materials written by Noam Eliaz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current understanding of the mechanical, chemical and biological processes that are responsible for the degradation of a variety of implant materials. All 18 chapters will be written by internationally renowned experts to address both fundamental and practical aspects of research into the field. Different failure mechanisms such as corrosion, fatigue, and wear will be reviewed, together with experimental techniques for monitoring them, either in vitro or in vivo. Procedures for implant retrieval and analysis will be presented. A variety of biomaterials (stainless steels, titanium and its alloys, nitinol, magnesium alloys, polyethylene, biodegradable polymers, silicone gel, hydrogels, calcium phosphates) and medical devices (orthopedic and dental implants, stents, heart valves, breast implants) will be analyzed in detail. The book will serve as a broad reference source for graduate students and researchers studying biomedicine, corrosion, surface science, and electrochemistry.
Author :Michael Anthony Nastasi Publisher :Springer Science & Business Media ISBN 13 :9780792321958 Total Pages :646 pages Book Rating :4.3/5 (219 download)
Book Synopsis Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures by : Michael Anthony Nastasi
Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures written by Michael Anthony Nastasi and published by Springer Science & Business Media. This book was released on 1993 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the emerging class of new materials characterized by ultra-fine microstrucures. The NATO ASI which produced this book was the first international scientific meeting devoted to a discussion of the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Topics covered include superplasticity, tribology, and the supermodulus effect. Review chapters cover a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties. Much of the work is concerned with the issue of how far conventional techniques and concepts can be extended toward atomic scale probing. Another key issue concerns the structure of nanocrystalline materials, in particular, what is the structure and composition of the internal boundaries. These ultra-fine microstructures have proved to challenge even the finest probes that the materials science community has today.
Book Synopsis Nanoparticulate Materials by : Kathy Lu
Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.