Experimental Treatise On The Flammability Characteristics Of Coal Dust Air Suspensions

Download Experimental Treatise On The Flammability Characteristics Of Coal Dust Air Suspensions full books in PDF, epub, and Kindle. Read online Experimental Treatise On The Flammability Characteristics Of Coal Dust Air Suspensions ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Masters Theses in the Pure and Applied Sciences

Author : Wade H. Shafer
Publisher : Springer Science & Business Media
ISBN 13 : 1468449192
Total Pages : 314 pages
Book Rating : 4.4/5 (684 download)

DOWNLOAD NOW!

Book Synopsis Masters Theses in the Pure and Applied Sciences by : Wade H. Shafer

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

The Ten Most Beautiful Experiments

Author : George Johnson
Publisher : Vintage
ISBN 13 : 140003423X
Total Pages : 210 pages
Book Rating : 4.4/5 ( download)

DOWNLOAD NOW!

Book Synopsis The Ten Most Beautiful Experiments by : George Johnson

Download or read book The Ten Most Beautiful Experiments written by George Johnson and published by Vintage. This book was released on 2009-03-10 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: A dazzling, irresistible collection of the ten most groundbreaking and beautiful experiments in scientific history. With the attention to detail of a historian and the storytelling ability of a novelist, New York Times science writer George Johnson celebrates these groundbreaking experiments and re-creates a time when the world seemed filled with mysterious forces and scientists were in awe of light, electricity, and the human body. Here, we see Galileo staring down gravity, Newton breaking apart light, and Pavlov studying his now famous dogs. This is science in its most creative, hands-on form, when ingenuity of the mind is the most useful tool in the lab and the rewards of a well-considered experiment are on exquisite display.

Characterisation of Bulk Solids

Author : Don McGlinchey
Publisher : John Wiley & Sons
ISBN 13 : 1405143630
Total Pages : 280 pages
Book Rating : 4.4/5 (51 download)

DOWNLOAD NOW!

Book Synopsis Characterisation of Bulk Solids by : Don McGlinchey

Download or read book Characterisation of Bulk Solids written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.

Gas, Dust and Hybrid Explosions

Author : W.E. Baker
Publisher : Elsevier Publishing Company
ISBN 13 :
Total Pages : 284 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Gas, Dust and Hybrid Explosions by : W.E. Baker

Download or read book Gas, Dust and Hybrid Explosions written by W.E. Baker and published by Elsevier Publishing Company. This book was released on 1991-08-27 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damaging accidental explosions are a continuous threat to industry. Categories for such explosions include combustible dust explosions; reactive gas explosions, both confined and unconfined; hybrid explosions involving both gases and dusts; bursts of pressure vessels and piping; and liquid propellant explosions. This book evaluates the physical processes and resulting blast effects for these types of explosions. Special attention is given to reactive gas explosions, both confined and unconfined. This latter class of explosion has occurred all too frequently in refineries and petrochemical complexes, and is also one of the most difficult to predict and evaluate. Much recent work on this topic is reviewed and summarized. This is the only publication of its kind, to date, that offers such a thorough coverage of these types of industrial explosions. [p]Each class of explosion source is reviewed separately, first discussing fundamentals, then presenting methods of analysis and testing, and finally giving curves or equations to predict effects of the particular class of explosion. An extensive bibliography is included together with tables of pertinent properties of explosive materials. The text also includes many figures, equations, tables and a keyword index. The book is intended for researchers in the field of characterizing and mitigating industrial explosions. It will also be of interest to engineers, scientists, and insurers involved in processes.

Agricultural Engineering

Author :
Publisher :
ISBN 13 :
Total Pages : 554 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Agricultural Engineering by :

Download or read book Agricultural Engineering written by and published by . This book was released on 1923 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:

The Fingerprint

Author : U. S. Department Justice
Publisher : Createspace Independent Publishing Platform
ISBN 13 : 9781500674151
Total Pages : 0 pages
Book Rating : 4.6/5 (741 download)

DOWNLOAD NOW!

Book Synopsis The Fingerprint by : U. S. Department Justice

Download or read book The Fingerprint written by U. S. Department Justice and published by Createspace Independent Publishing Platform. This book was released on 2014-08-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of The Fingerprint Sourcebook originated during a meeting in April 2002. Individuals representing the fingerprint, academic, and scientific communities met in Chicago, Illinois, for a day and a half to discuss the state of fingerprint identification with a view toward the challenges raised by Daubert issues. The meeting was a joint project between the International Association for Identification (IAI) and West Virginia University (WVU). One recommendation that came out of that meeting was a suggestion to create a sourcebook for friction ridge examiners, that is, a single source of researched information regarding the subject. This sourcebook would provide educational, training, and research information for the international scientific community.

Toxicological Profile for Boron

Author :
Publisher :
ISBN 13 :
Total Pages : 256 pages
Book Rating : 4.:/5 (9 download)

DOWNLOAD NOW!

Book Synopsis Toxicological Profile for Boron by :

Download or read book Toxicological Profile for Boron written by and published by . This book was released on 2010 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Reverse Engineering of Rubber Products

Author : Saikat Das Gupta
Publisher : CRC Press
ISBN 13 : 0849373166
Total Pages : 360 pages
Book Rating : 4.8/5 (493 download)

DOWNLOAD NOW!

Book Synopsis Reverse Engineering of Rubber Products by : Saikat Das Gupta

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Explosion Hazards and Evaluation

Author : W.E. Baker
Publisher : Elsevier
ISBN 13 : 0444599886
Total Pages : 840 pages
Book Rating : 4.4/5 (445 download)

DOWNLOAD NOW!

Book Synopsis Explosion Hazards and Evaluation by : W.E. Baker

Download or read book Explosion Hazards and Evaluation written by W.E. Baker and published by Elsevier. This book was released on 2012-12-02 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards and Evaluation presents the principles and applications of explosion hazards evaluation. The text is organized into nine chapters. Chapters 1 and 2 discuss the energy release processes which generate accidental explosions, and the resulting development of pressure and shock waves in a surrounding atmosphere. The manner in which the "free-field" waves are modified in interacting with structures or other objects in their paths is discussed in Chapter 3. Structural response to blast loading and non-penetrating impact is covered in two chapters, with Chapter 4 including simplified analysis methods and Chapter 5 including numerical methods. Chapter 6 includes a rather comprehensive treatment of generation of fragments and missiles in explosions, and the flight and effects of impact of these objects. Chapter 7 considers thermal radiation of large chemical explosions. Explosions may or may not cause damage or casualty, and various damage criteria have been developed for structures, vehicles, and people. These criteria are presented in Chapter 8. General procedures for both the postmortem evaluation of accidental explosions and for design for blast and impact resistance are reviewed in Chapter 9. Engineers, scientists, and plant safety personnel will find the book very useful.

Molten Salt Technology

Author : David G. Lovering
Publisher : Springer
ISBN 13 : 1475717245
Total Pages : 536 pages
Book Rating : 4.4/5 (757 download)

DOWNLOAD NOW!

Book Synopsis Molten Salt Technology by : David G. Lovering

Download or read book Molten Salt Technology written by David G. Lovering and published by Springer. This book was released on 2014-11-14 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Char and Carbon Materials Derived from Biomass

Author : Mejdi Jeguirim
Publisher : Elsevier
ISBN 13 : 0128148942
Total Pages : 508 pages
Book Rating : 4.1/5 (281 download)

DOWNLOAD NOW!

Book Synopsis Char and Carbon Materials Derived from Biomass by : Mejdi Jeguirim

Download or read book Char and Carbon Materials Derived from Biomass written by Mejdi Jeguirim and published by Elsevier. This book was released on 2019-03-19 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Char and Carbon Materials Derived from Biomass: Production, Characterization and Applications provides an overview of biomass char production methods (pyrolysis, hydrothermal carbonization, etc.), along with the characterization techniques typically used (Scanning Electronic Microscopy, X-Ray Fluorescence, Nitrogen adsorption, etc.) In addition, the book includes a discussion of the various properties of biomass chars and their suitable recovery processes, concluding with a demonstration of applications. As biomass can be converted to energy, biofuels and bioproducts via thermochemical conversion processes, such as combustion, pyrolysis and gasification, this book is ideal for professionals in energy production and storage fields, as well as professionals in waste treatment, gas treatment, and more. - Provides a discussion of sources of biomass feedstocks, such as agricultural, woody plants and food processing residue - Discusses the various production processes of biomass chars, including pyrolysis and hydrothermal carbonization - Explores various applications of biomass chars within different industries, including energy and agronomy

Cleaner Technologies Substitutes Assessment

Author : Lori E. Kincaid
Publisher :
ISBN 13 :
Total Pages : 544 pages
Book Rating : 4.:/5 (319 download)

DOWNLOAD NOW!

Book Synopsis Cleaner Technologies Substitutes Assessment by : Lori E. Kincaid

Download or read book Cleaner Technologies Substitutes Assessment written by Lori E. Kincaid and published by . This book was released on 1997 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

The Social Construction of Technological Systems

Author : Wiebe E. Bijker
Publisher : MIT Press
ISBN 13 : 9780262521376
Total Pages : 428 pages
Book Rating : 4.5/5 (213 download)

DOWNLOAD NOW!

Book Synopsis The Social Construction of Technological Systems by : Wiebe E. Bijker

Download or read book The Social Construction of Technological Systems written by Wiebe E. Bijker and published by MIT Press. This book was released on 1989 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The impact of technology on society is clear and unmistakeable. The influence of society on technology is more subtle. The 13 essays in this book have been written by a diverse group of scholars united by a common interest in creating a new field - the sociology of technology. They draw on a wide array of case studies - from cooking stoves to missile systems, from 15th-century Portugal to today's Al labs - to outline an original research program based on a synthesis of ideas from the social studies of science and the history of technology. Together they affirm the need for a study of technology that gives equal weight to technical, social, economic, and political questions"--Back cover.

Particle Size Measurements

Author : Henk G. Merkus
Publisher : Springer Science & Business Media
ISBN 13 : 1402090161
Total Pages : 535 pages
Book Rating : 4.4/5 (2 download)

DOWNLOAD NOW!

Book Synopsis Particle Size Measurements by : Henk G. Merkus

Download or read book Particle Size Measurements written by Henk G. Merkus and published by Springer Science & Business Media. This book was released on 2009-01-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the practical aspects of particle size measurement: a major difference with existing books, which have a more theoretical approach. Of course, the emphasis still lies on the measurement techniques. For optimum application, their theoretical background is accompanied by quantitative quality aspects, limitations and problem identification. In addition the book covers the phenomena of sampling and dispersion of powders, either of which may be dominant in the overall analysis error. Moreover, there are chapters on the general aspects of quality for particle size analysis, quality management, reference materials and written standards, in- and on-line measurement, definitions and multilingual terminology, and on the statistics required for adequate interpretation of results. Importantly, a relation is made to product performance, both during processing as well as in final application. In view of its set-up, this book is well suited to support particle size measurement courses.

Toxicological Profile for Toxaphene

Author :
Publisher :
ISBN 13 :
Total Pages : 262 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Toxicological Profile for Toxaphene by :

Download or read book Toxicological Profile for Toxaphene written by and published by . This book was released on 1996 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Coatings Technology Handbook

Author : Arthur A. Tracton
Publisher : CRC Press
ISBN 13 : 1420027328
Total Pages : 930 pages
Book Rating : 4.4/5 (2 download)

DOWNLOAD NOW!

Book Synopsis Coatings Technology Handbook by : Arthur A. Tracton

Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over

Advances in Manufacturing and Industrial Engineering

Author : Ranganath M. Singari
Publisher : Springer Nature
ISBN 13 : 9811585423
Total Pages : 1180 pages
Book Rating : 4.8/5 (115 download)

DOWNLOAD NOW!

Book Synopsis Advances in Manufacturing and Industrial Engineering by : Ranganath M. Singari

Download or read book Advances in Manufacturing and Industrial Engineering written by Ranganath M. Singari and published by Springer Nature. This book was released on 2021-01-13 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer reviewed papers from the International Conference on Advanced Production and Industrial Engineering (ICAPIE 2019). It covers a wide range of topics and latest research in mechanical systems engineering, materials engineering, micro-machining, renewable energy, industrial and production engineering, and additive manufacturing. Given the range of topics discussed, this book will be useful for students and researchers primarily working in mechanical and industrial engineering, and energy technologies.