Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Broadband Opto Electrical Receivers In Standard Cmos
Download Broadband Opto Electrical Receivers In Standard Cmos full books in PDF, epub, and Kindle. Read online Broadband Opto Electrical Receivers In Standard Cmos ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Broadband Opto-Electrical Receivers in Standard CMOS by : Carolien Hermans
Download or read book Broadband Opto-Electrical Receivers in Standard CMOS written by Carolien Hermans and published by Springer Science & Business Media. This book was released on 2007-06-13 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book opens with the basics of the design of opto-electronic interface circuits. The text continues with an in-depth analysis of the photodiode, transimpedance amplifier (TIA) and limiting amplifier (LA). To thoroughly describe light detection mechanisms in silicon, first a one-dimensional and second a two-dimensional model is developed. All material is experimentally verified with several CMOS implementations, with ultimately a fully integrated Gbit/s optical receiver front-end including photodiode, TIA and LA.
Book Synopsis Optoelectronic Circuits in Nanometer CMOS Technology by : Mohamed Atef
Download or read book Optoelectronic Circuits in Nanometer CMOS Technology written by Mohamed Atef and published by Springer. This book was released on 2016-03-04 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the newest implementations of integrated photodiodes fabricated in nanometer standard CMOS technologies. It also includes the required fundamentals, the state-of-the-art, and the design of high-performance laser drivers, transimpedance amplifiers, equalizers, and limiting amplifiers fabricated in nanometer CMOS technologies. This book shows the newest results for the performance of integrated optical receivers, laser drivers, modulator drivers and optical sensors in nanometer standard CMOS technologies. Nanometer CMOS technologies rapidly advanced, enabling the implementation of integrated optical receivers for high data rates of several Giga-bits per second and of high-pixel count optical imagers and sensors. In particular, low cost silicon CMOS optoelectronic integrated circuits became very attractive because they can be extensively applied to short-distance optical communications, such as local area network, chip-to-chip and board-to-board interconnects as well as to imaging and medical sensors.
Book Synopsis CMOS Receiver Front-ends for Gigabit Short-Range Optical Communications by : Francisco Aznar
Download or read book CMOS Receiver Front-ends for Gigabit Short-Range Optical Communications written by Francisco Aznar and published by Springer Science & Business Media. This book was released on 2012-08-09 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes optical receiver solutions integrated in standard CMOS technology, attaining high-speed short-range transmission within cost-effective constraints. These techniques support short reach applications, such as local area networks, fiber-to-the-home and multimedia systems in cars and homes. The authors show how to implement the optical front-end in the same technology as the subsequent digital circuitry, leading to integration of the entire receiver system in the same chip. The presentation focuses on CMOS receiver design targeting gigabit transmission along a low-cost, standardized plastic optical fiber up to 50m in length. This book includes a detailed study of CMOS optical receiver design – from building blocks to the system level.
Book Synopsis CMOS Multichannel Single-Chip Receivers for Multi-Gigabit Optical Data Communications by : Paul Muller
Download or read book CMOS Multichannel Single-Chip Receivers for Multi-Gigabit Optical Data Communications written by Paul Muller and published by Springer Science & Business Media. This book was released on 2007-10-29 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the world of optical data communications this book will be an absolute must-read. It focuses on optical communications for short and very short distance applications and discusses the monolithic integration of optical receivers with processing elements in standard CMOS technologies. What’s more, it provides the reader with the necessary background knowledge to fully understand the trade-offs in short-distance communication receiver design and presents the key issues to be addressed in the development of such receivers in CMOS technologies. Moreover, novel design approaches are presented.
Book Synopsis High-Speed Optical Receivers with Integrated Photodiode in Nanoscale CMOS by : Filip Tavernier
Download or read book High-Speed Optical Receivers with Integrated Photodiode in Nanoscale CMOS written by Filip Tavernier and published by Springer Science & Business Media. This book was released on 2011-06-20 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design of optical receivers that use the most economical integration technology, while enabling performance that is typically only found in very expensive devices. To achieve this, all necessary functionality, from light detection to digital output, is integrated on a single piece of silicon. All building blocks are thoroughly discussed, including photodiodes, transimpedance amplifiers, equalizers and post amplifiers.
Book Synopsis Design of High Voltage xDSL Line Drivers in Standard CMOS by : Bert Serneels
Download or read book Design of High Voltage xDSL Line Drivers in Standard CMOS written by Bert Serneels and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fits in the quest for highly efficient fully integrated xDSL modems for central office applications. It presents a summary of research at one of Europe’s most famous analog design research groups over a five year period. The book focuses on the line driver, the most demanding building block of the xDSL modem for lowering power. The book covers the total design flow of monolithic CMOS high voltage circuits. It is essential reading for analog design engineers.
Book Synopsis Adaptive Multi-Standard RF Front-Ends by : Vojkan Vidojkovic
Download or read book Adaptive Multi-Standard RF Front-Ends written by Vojkan Vidojkovic and published by Springer Science & Business Media. This book was released on 2008-02-07 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates solutions, benefits, limitations, and costs associated with multi-standard operation of RF front-ends and their ability to adapt to variable radio environments. Next, it highlights the optimization of RF front-ends to allow maximum performance within a certain power budget, while targeting full integration. Finally, the book investigates possibilities for low-voltage, low-power circuit topologies in CMOS technology.
Book Synopsis Structured Analog CMOS Design by : Danica Stefanovic
Download or read book Structured Analog CMOS Design written by Danica Stefanovic and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structured Analog CMOS Design describes a structured analog design approach that makes it possible to simplify complex analog design problems and develop a design strategy that can be used for the design of large number of analog cells. It intentionally avoids treating the analog design as a mathematical problem, developing a design procedure based on the understanding of device physics and approximations that give insight into parameter interdependences. The basic design concept consists in analog cell partitioning into the basic analog structures and sizing of these basic analog structures in a predefined procedural design sequence. The procedural design sequence ensures the correct propagation of design specifications, the verification of parameter limits and the local optimization loops. The proposed design procedure is also implemented as a CAD tool that follows this book.
Book Synopsis Low Power UWB CMOS Radar Sensors by : Hervé Paulino
Download or read book Low Power UWB CMOS Radar Sensors written by Hervé Paulino and published by Springer Science & Business Media. This book was released on 2008-04-30 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Power UWB CMOS Radar Sensors deals with the problem of designing low cost CMOS radar sensors. The radar sensor uses UWB signals in order to obtain a reasonable target separation capability, while maintaining a maximum signal frequency below 2 GHz. This maximum frequency value is well within the reach of current CMOS technologies. The use of UWB signals means that most of the methodologies used in the design of circuits and systems that process narrow band signals, can no longer be applied. Low Power UWB CMOS Radar Sensors provides an analysis between the interaction of UWB signals, the antennas and the processing circuits. This analysis leads to some interesting conclusions on the types of antennas and types of circuits that should be used. A methodology to compare the noise performance of UWB processing circuits is also derived. This methodology is used to analyze and design the constituting circuits of the radar transceiver. In order to validate the design methodology a CMOS prototype is designed and experimentally evaluated.
Book Synopsis Low-Power High-Speed ADCs for Nanometer CMOS Integration by : Zhiheng Cao
Download or read book Low-Power High-Speed ADCs for Nanometer CMOS Integration written by Zhiheng Cao and published by Springer Science & Business Media. This book was released on 2008-07-15 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power High-Speed ADCs for Nanometer CMOS Integration is about the design and implementation of ADC in nanometer CMOS processes that achieve lower power consumption for a given speed and resolution than previous designs, through architectural and circuit innovations that take advantage of unique features of nanometer CMOS processes. A phase lock loop (PLL) clock multiplier has also been designed using new circuit techniques and successfully tested. 1) A 1.2V, 52mW, 210MS/s 10-bit two-step ADC in 130nm CMOS occupying 0.38mm2. Using offset canceling comparators and capacitor networks implemented with small value interconnect capacitors to replace resistor ladder/multiplexer in conventional sub-ranging ADCs, it achieves 74dB SFDR for 10MHz and 71dB SFDR for 100MHz input. 2) A 32mW, 1.25GS/s 6-bit ADC with 2.5GHz internal clock in 130nm CMOS. A new type of architecture that combines flash and SAR enables the lowest power consumption, 6-bit >1GS/s ADC reported to date. This design can be a drop-in replacement for existing flash ADCs since it does require any post-processing or calibration step and has the same latency as flash. 3) A 0.4ps-rms-jitter (integrated from 3kHz to 300MHz offset for >2.5GHz) 1-3GHz tunable, phase-noise programmable clock-multiplier PLL for generating sampling clock to the SAR ADC. A new loop filter structure enables phase error preamplification to lower PLL in-band noise without increasing loop filter capacitor size.
Book Synopsis Circuit and Interconnect Design for RF and High Bit-rate Applications by : Hugo Veenstra
Download or read book Circuit and Interconnect Design for RF and High Bit-rate Applications written by Hugo Veenstra and published by Springer Science & Business Media. This book was released on 2008-06-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Realizing maximum performance from high bit-rate and RF circuits requires close attention to IC technology, circuit-to-circuit interconnections (i.e., the ‘interconnect’) and circuit design. This detailed book covers each of these topics from theory to practice, with sufficient detail to help you produce circuits that are ‘first-time right’. Many practical circuit examples are included to demonstrate the interplay between technology, interconnect and circuit design.
Book Synopsis Silicon-Based RF Front-Ends for Ultra Wideband Radios by : Aminghasem Safarian
Download or read book Silicon-Based RF Front-Ends for Ultra Wideband Radios written by Aminghasem Safarian and published by Springer Science & Business Media. This book was released on 2007-12-28 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive study of silicon-based distributed architectures in wideband circuits are presented in this book. Novel circuit architectures for ultra-wideband (UWB) wireless technologies are described. The book begins with an introduction of several transceiver architectures for UWB. The discussion then focuses on RF front-end of the UWB radio. Therefore, the book will be of interest to RF circuit designers and students.
Book Synopsis Analog-Baseband Architectures and Circuits for Multistandard and Low-Voltage Wireless Transceivers by : Pui-In Mak
Download or read book Analog-Baseband Architectures and Circuits for Multistandard and Low-Voltage Wireless Transceivers written by Pui-In Mak and published by Springer Science & Business Media. This book was released on 2007-09-07 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents architectural and circuit techniques for wireless transceivers to achieve multistandard and low-voltage compliance. It provides an up-to-date survey and detailed study of the state-of-the-art transceivers for modern single- and multi-purpose wireless communication systems. The book includes comprehensive analysis and design of multimode reconfigurable receivers and transmitters for an efficient multistandard compliance.
Book Synopsis High-Level Modeling and Synthesis of Analog Integrated Systems by : Ewout S. J. Martens
Download or read book High-Level Modeling and Synthesis of Analog Integrated Systems written by Ewout S. J. Martens and published by Springer Science & Business Media. This book was released on 2008-01-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various approaches for finding optimal values for the parameters of analog cells have made their entrance in commercial applications. However, a larger impact on the performance is expected if tools are developed which operate on a higher abstraction level and consider multiple architectural choices to realize a particular functionality. This book examines the opportunities, conditions, problems, solutions and systematic methodologies for this new generation of analog CAD tools.
Book Synopsis Fiber-Optic-Based Sensing Systems by : Lazo M. Manojlović
Download or read book Fiber-Optic-Based Sensing Systems written by Lazo M. Manojlović and published by CRC Press. This book was released on 2022-06-02 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for both intrinsic and extrinsic fiber-optic sensor technologies continues to grow. To meet the demands of this fast-expanding applications-driven market, this book discusses both the latest advances and recent application opportunities along with the basic optical phenomena, with the main emphasis on applying optical knowledge for solving real-life engineering problems. Key features of the book: • Highlights the uniqueness of fiber-optics sensors • Presents state-of-the-art technology in optical fiber sensors • Discusses a variety of fiber-optic topologies • Considers different detection techniques • Gives special attention to distributed fiber-optic sensing systems Basic tools and concepts are presented in the earlier chapters, which are then developed in more detail in the later chapters. The book is organized in seven chapters covering a broad range of fiber-optical sensing phenomena. Written for undergraduate and graduate students who want to broaden their knowledge of fiber-optic sensing system applications for real-life engineering problems, the volume is also valuable for engineers who want to acquire the basic principles of optics, especially fiber-optics.
Book Synopsis Analysis and Design of Quadrature Oscillators by : Luis B. Oliveira
Download or read book Analysis and Design of Quadrature Oscillators written by Luis B. Oliveira and published by Springer Science & Business Media. This book was released on 2008-07-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern RF receivers and transmitters require quadrature oscillators with accurate quadrature and low phase-noise. Existing literature is dedicated mainly to single oscillators, and is strongly biased towards LC oscillators. This book is devoted to quadrature oscillatorsand presents adetailed comparative study ofLC and RCosc- lators, both at architectural and at circuit levels. It is shown that in cross-coupled RC oscillators both the quadrature error and phase-noise are reduced, whereas in LC - cillators the coupling decreases the quadrature error, but increases the phase-noise. Thus, quadrature RC oscillators can be a practical alternative to LC oscillators, - pecially when area and cost are to be minimized. The main topics of the book are: cross-coupled LC quasi-sinusoidal oscillators, cross-coupled RC relaxation oscillators, a quadrature RC oscillator-mixer, and t- integrator oscillators. The effect of mismatches on the phase-error and the pha- noise are thoroughly investigated. The book includes many experimental results, obtained from different integrated circuit prototypes, in the GHz range. A structured design approach is followed: a technology independent study, with ideal blocks, is performed initially, and then the circuit level design is addressed. This book can be used in advanced courses on RF circuit design. In addition to post-graduate students and lecturers, this book will be of interest to design engineers and researchers in this area.
Book Synopsis Substrate Noise Coupling in RFICs by : Ahmed Helmy
Download or read book Substrate Noise Coupling in RFICs written by Ahmed Helmy and published by Springer Science & Business Media. This book was released on 2008-03-23 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports modeling and simulation techniques for substrate noise coupling effects in RFICs and introduces isolation structures and design guides to mitigate such effects with the ultimate goal of enhancing the yield of RF and mixed signal SoCs. The book further reports silicon measurements, and new test and noise isolation structures. To the authors’ knowledge, this is the first title devoted to the topic of substrate noise coupling in RFICs as part of a large SoC.
