Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Wind Energy Conversion Systems Based On Dfig Technology Used As Active Filters Steady State And Transient Analysis
Download Wind Energy Conversion Systems Based On Dfig Technology Used As Active Filters Steady State And Transient Analysis full books in PDF, epub, and Kindle. Read online Wind Energy Conversion Systems Based On Dfig Technology Used As Active Filters Steady State And Transient Analysis ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Wind Energy Conversion Systems Based on DFIG Technology Used as Active Filters: Steady-State and Transient Analysis by : Grazia Todeschini
Download or read book Wind Energy Conversion Systems Based on DFIG Technology Used as Active Filters: Steady-State and Transient Analysis written by Grazia Todeschini and published by . This book was released on 2010 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This thesis deals with the performance of a Wind Energy Conversion System operating as a power generator and Active Filter simultaneously. As a power generator, the Wind Energy Conversion System converts wind energy into electric energy; as an Active Filter, it sinks the harmonic currents injected by Non-Linear Loads connected at the same feeder. Three control systems are developed to ensure the described operation; a specific study regarding the compensation of the triplen harmonics is carried out; Doubly-Fed Induction Generator derating is defined; and an engineering economic analysis is performed to determine the profitability of the proposed operation. The Wind Energy Conversion System performance as generator and Active Filter has been studied for steady-state analysis, fast transients and low transients. It is concluded that the proposed control systems allow operating the Wind Energy Conversion System as power generator and harmonic compensator both during steady state and transient operation; the described operation causes power loss increase and voltage distortion that determine the choice of the component and require system derating.
Book Synopsis DFIG-based Wind Power Conversion System Connected to Grid by : Akshay Kumar
Download or read book DFIG-based Wind Power Conversion System Connected to Grid written by Akshay Kumar and published by GRIN Verlag. This book was released on 2014-08-14 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2014 in the subject Engineering - Power Engineering, grade: 7.8, Ajay Kumar Garg Engineering College, course: M.Tech, language: English, abstract: Wind generation has become the most important alternate energy source and has experienced increased progress in India during the past decade. While it has great potential as an alternative to less environmentally friendly energy sources, there are various technical challenges that cause wind to be considered negatively by many utilities. Wind energy conversion systems suffer from the fact that their real power generation is closely dependent on the local environmental conditions. The Doubly Fed Induction Generator (DFIG) based wind turbine with variable-speed variable-pitch control scheme is the most popular wind power generator in the wind power industry. This machine can be operated either in grid connected or standalone mode. In this thesis, a detailed electromechanical model of a DFIG-based wind turbine connected to power grid as well as separately operated wind turbine system with different sub-systems is developed in the MATLAB/SIMULINK environment and its equivalent generator and turbine control structure is realized. In this regard following configurations have been considered: • DFIG with Battery storage sub-system • DFIG with Buck-Boost converter • DFIG with transformer • DFIG with 3-winding transformer Addition of battery storage and buck-boost converter sub-systems into the system enables not only dispatching of generator power but also decreases the variability in their reactive power requirements. The full control over both active and reactive power is possible by the use of transformer between DFIG and rotor side converter. The steady state behavior of the overall wind turbine system is presented and the steady state reactive power ability of the DFIG is analyzed. It has been shown that major part of the reactive power should be supplied from rotor side converter to reduce the overall rating of the generator. The DFIG with above mentioned sub-systems is connected to grid. The total harmonic distortion analysis and efficiency are carried out. It is found that DFIG with transformer in between machine and rotor side converter has lowest THD (2.29%) and DFIG with 3-winding transformer has maximum efficiency (above 93%).
Book Synopsis Modeling, Analysis and Enhancement of the performance of a Wind Driven DFIG During steady state and transient conditions by : Mohmoud Mossa
Download or read book Modeling, Analysis and Enhancement of the performance of a Wind Driven DFIG During steady state and transient conditions written by Mohmoud Mossa and published by Anchor Academic Publishing (aap_verlag). This book was released on 2014-02-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, wind electrical power systems are getting a lot of attention since they are cost competitive, environmentally clean, and safe renewable power source as compared with the fossil fuel and nuclear power generation. A special type of induction generator, called a doubly fed induction generator (DFIG), is used extensively for high-power wind applications. They are used more and more in wind turbine applications due to the ease of controllability, the high energy efficiency, and the improved power quality.This research aims to develop a method of a field orientation scheme for control both, the active and the reactive powers of a DFIG that are driven by a wind turbine. Also, the dynamic model of the DFIG, driven by a wind turbine during grid faults, is analyzed and developed, using the method of symmetrical components. Finally, this study proposes a novel fault ride-through (FRT) capability with a suitable control strategy (i.e. the ability of the power system to remain connected to the grid during faults).
Book Synopsis Wind Energy Conversion Systems by : S.M. Muyeen
Download or read book Wind Energy Conversion Systems written by S.M. Muyeen and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Energy Conversion System covers the technological progress of wind energy conversion systems, along with potential future trends. It includes recently developed wind energy conversion systems such as multi-converter operation of variable-speed wind generators, lightning protection schemes, voltage flicker mitigation and prediction schemes for advanced control of wind generators. Modeling and control strategies of variable speed wind generators are discussed, together with the frequency converter topologies suitable for grid integration. Wind Energy Conversion System also describes offshore farm technologies including multi-terminal topology and space-based wind observation schemes, as well as both AC and DC based wind farm topologies. The stability and reliability of wind farms are discussed, and grid integration issues are examined in the context of the most recent industry guidelines. Wind power smoothing, one of the big challenges for transmission system operators, is a particular focus. Fault ride through and frequency fluctuation mitigation using energy storage options are also covered. Efficiency analyses are presented for different types of commercially available wind turbine generator systems, large scale wind generators using superconducting material, and the integration of offshore wind and marine current farms. Each chapter is written by a leader in the wind energy arena, making Wind Energy Conversion System a valuable reference for researchers and students of wind energy.
Book Synopsis Doubly Fed Induction Machine by : Gonzalo Abad
Download or read book Doubly Fed Induction Machine written by Gonzalo Abad and published by John Wiley & Sons. This book was released on 2011-09-28 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be focused on the modeling and control of the DFIM based wind turbines. In the first part of the book, the mathematical description of different basic dynamic models of the DFIM will be carried out. It will be accompanied by a detailed steady-state analysis of the machine. After that, a more sophisticated model of the machine that considers grid disturbances, such as voltage dips and unbalances will be also studied. The second part of the book surveys the most relevant control strategies used for the DFIM when it operates at the wind energy generation application. The control techniques studied, range from standard solutions used by wind turbine manufacturers, to the last developments oriented to improve the behavior of high power wind turbines, as well as control and hardware based solutions to address different faulty scenarios of the grid. In addition, the standalone DFIM generation system will be also analyzed.
Book Synopsis Model Predictive Control of Wind Energy Conversion Systems by : Venkata Yaramasu
Download or read book Model Predictive Control of Wind Energy Conversion Systems written by Venkata Yaramasu and published by John Wiley & Sons. This book was released on 2016-11-23 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control of Wind Energy Conversion Systems addresses the predicative control strategy that has emerged as a promising digital control tool within the field of power electronics, variable-speed motor drives, and energy conversion systems. The authors provide a comprehensive analysis on the model predictive control of power converters employed in a wide variety of variable-speed wind energy conversion systems (WECS). The contents of this book includes an overview of wind energy system configurations, power converters for variable-speed WECS, digital control techniques, MPC, modeling of power converters and wind generators for MPC design. Other topics include the mapping of continuous-time models to discrete-time models by various exact, approximate, and quasi-exact discretization methods, modeling and control of wind turbine grid-side two-level and multilevel voltage source converters. The authors also focus on the MPC of several power converter configurations for full variable-speed permanent magnet synchronous generator based WECS, squirrel-cage induction generator based WECS, and semi-variable-speed doubly fed induction generator based WECS. Furthermore, this book: Analyzes a wide variety of practical WECS, illustrating important concepts with case studies, simulations, and experimental results Provides a step-by-step design procedure for the development of predictive control schemes for various WECS configurations Describes continuous- and discrete-time modeling of wind generators and power converters, weighting factor selection, discretization methods, and extrapolation techniques Presents useful material for other power electronic applications such as variable-speed motor drives, power quality conditioners, electric vehicles, photovoltaic energy systems, distributed generation, and high-voltage direct current transmission. Explores S-Function Builder programming in MATLAB environment to implement various MPC strategies through the companion website Reflecting the latest technologies in the field, Model Predictive Control of Wind Energy Conversion Systems is a valuable reference for academic researchers, practicing engineers, and other professionals. It can also be used as a textbook for graduate-level and advanced undergraduate courses.
Book Synopsis Simulation Analysis of DFIG Integrated Wind Turbine Control System by : Ramesh Kumar Behara
Download or read book Simulation Analysis of DFIG Integrated Wind Turbine Control System written by Ramesh Kumar Behara and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, scientists and academics are discovering progressive improvements in the arena of wind power technology economically and reliably, allowing them to produce electricity focusing on renewable energy resources. Wind turbines (WT) using the Doubly Fed Induction Generators (DFIGs) have attracted particular attention because of their advantages such as variable speed constant frequency (VSCF) operation, independent control capabilities for maximum power point tracking (MPPT), active and reactive power controls, and voltage control strategy at the point of common coupling (PCC). When such resources have to be integrated into the existing power system, the operation becomes more challenging, particularly in terms of stability, security, and reliability. A DFIG system with its control strategies is simulated on MATLAB software. This entails the rapid control prototype testing of grid-connected, variable speed DFIG wind turbines to investigate the WT,Äôs steady-state and dynamic behavior under normal and disturbed wind conditions. To augment the transient stability of DFIG, the simulation results for the active and reactive power of conventional controllers are compared with the adaptive tracking, self-tuned feed-forward PI controller model for optimum performance. Conclusive outcomes manifest the superior robustness of the feed-forward PI controller in terms of rising time, settling time, and overshoot value.
Book Synopsis Advanced Control and Optimization Paradigms for Wind Energy Systems by : Radu-Emil Precup
Download or read book Advanced Control and Optimization Paradigms for Wind Energy Systems written by Radu-Emil Precup and published by Springer. This book was released on 2019-02-07 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced studies on the conversion efficiency, mechanical reliability, and the quality of power related to wind energy systems. The main concern regarding such systems is reconciling the highly intermittent nature of the primary source (wind speed) with the demand for high-quality electrical energy and system stability. This means that wind energy conversion within the standard parameters imposed by the energy market and power industry is unachievable without optimization and control. The book discusses the rapid growth of control and optimization paradigms and applies them to wind energy systems: new controllers, new computational approaches, new applications, new algorithms, and new obstacles.
Book Synopsis Advanced Control of Doubly Fed Induction Generator for Wind Power Systems by : Dehong Xu
Download or read book Advanced Control of Doubly Fed Induction Generator for Wind Power Systems written by Dehong Xu and published by John Wiley & Sons. This book was released on 2018-08-14 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental concepts and advanced modelling techniques of Doubly Fed Induction Generators accompanied by analyses and simulation results Filled with illustrations, problems, models, analyses, case studies, selected simulation and experimental results, Advanced Control of Doubly Fed Induction Generator for Wind Power Systems provides the basic concepts for modelling and controlling of Doubly Fed Induction Generator (DFIG) wind power systems and their power converters. It explores both the challenges and concerns of DFIG under a non-ideal grid and introduces the control strategies and effective operations performance options of DFIG under a non-ideal grid. Other topics of this book include thermal analysis of DFIG wind power converters under grid faults; implications of the DFIG test bench; advanced control of DFIG under harmonic distorted grid voltage, including multiple-loop and resonant control; modeling of DFIG and GSC under unbalanced grid voltage; the LFRT of DFIG, including the recurring faults ride through of DFIG; and more. In addition, this resource: Explores the challenges and concerns of Doubly Fed Induction Generators (DFIG) under non-ideal grid Discusses basic concepts of DFIG wind power system and vector control schemes of DFIG Introduces control strategies under a non-ideal grid Includes case studies and simulation and experimental results Advanced Control of Doubly Fed Induction Generator for Wind Power Systems is an ideal book for graduate students studying renewable energy and power electronics as well as for research and development engineers working with wind power converters.
Book Synopsis Advances in Wind Energy Conversion Technology by : Mathew Sathyajith
Download or read book Advances in Wind Energy Conversion Technology written by Mathew Sathyajith and published by Springer Science & Business Media. This book was released on 2011-04-29 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an annual growth rate of over 35%, wind is the fastest growing energy source in the world today. As a result of intensive research and developmental efforts, the technology of generating energy from wind has significantly changed during the past five years. The book brings together all the latest aspects of wind energy conversion technology - right from the wind resource analysis to grid integration of the wind generated electricity. The chapters are contributed by academic and industrial experts having vast experience in these areas. Each chapter begins with an introduction explaining the current status of the technology and proceeds further to the advanced lever to cater for the needs of readers from different subject backgrounds. Extensive bibliography/references appended to each chapter give further guidance to the interested readers.
Book Synopsis Real-time Digital Control of DFIG-based Wind Generators for Grid Support by : Mohsen Mesbah
Download or read book Real-time Digital Control of DFIG-based Wind Generators for Grid Support written by Mohsen Mesbah and published by . This book was released on 2012 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, a set of new converter /control techniques are developed for the Grid Side and Rotor Side converter applications in DFIG wind power generation. A real time digital simulation technique is also presented which is capable of studying in real time the performance of the DFIG wind power generator connected to grid. A number of practical control strategies for DFIGs are implemented and their performances are compared. Results show that a new improved direct power controller is able to provide very quick transient response for both the active power and the reactive power output from the DFIG wind energy conversion system. Extensive simulations and practical implementation of the algorithms on a digital controller embedded inside a digital signal processor are implemented. The hardware and software of the developed prototype DFIG control mechanism is described in detail in this dissertation. In addition, to study the effect of voltage sag and other types of transient disturbances and faults, a prototype of a fault generator using the same digital signal processor has been implemented. Effect of such disturbances on a transformer is investigated which is the nearest most probable location of a grid fault or disturbance.
Book Synopsis Harmonic Analysis of the Wind Energy Conversion System Connected with Electrical Network by : Emmanuel Hernández Mayoral
Download or read book Harmonic Analysis of the Wind Energy Conversion System Connected with Electrical Network written by Emmanuel Hernández Mayoral and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A harmonic analysis for a wind energy conversion system (WECS) based in a doubly fed induction generator (DFIG) is presented. A back-to-back frequency converter as voltage source for excite to rotor winding is used whereas than the electrical network excites to stator winding. The analysis is based on the induction machine model and the steady-state frequency converter model. Additionally, dynamic-state and steady-state models are developed and compared validating the results of the simulations obtaining a harmonic model, in steady-state, clear, and precise of the wind energy conversion system.
Book Synopsis Modeling and Controller Design of a Wind Energy Conversion System Including a Matrix Converter by : Seyed Masoud Barakati
Download or read book Modeling and Controller Design of a Wind Energy Conversion System Including a Matrix Converter written by Seyed Masoud Barakati and published by . This book was released on 2008 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, a grid-connected wind-energy converter system including a matrix converter is proposed. The matrix converter, as a power electronic converter, is used to interface the induction generator with the grid and control the wind turbine shaft speed. At a given wind velocity, the mechanical power available from a wind turbine is a function of its shaft speed. Through the matrix converter, the terminal voltage and frequency of the induction generator is controlled, based on a constant V/f strategy, to adjust the turbine shaft speed and accordingly, control the active power injected into the grid to track maximum power for all wind velocities. The power factor at the interface with the grid is also controlled by the matrix converter to either ensure purely active power injection into the grid for optimal utilization of the installed wind turbine capacity or assist in regulation of voltage at the point of connection. Furthermore, the reactive power requirements of the induction generator are satisfied by the matrix converter to avoid use of self-excitation capacitors. The thesis addresses two dynamic models: a comprehensive dynamic model for a matrix converter and an overall dynamical model for the proposed wind turbine system. The developed matrix converter dynamic model is valid for both steady-state and transient analyses, and includes all required functions, i.e., control of the output voltage, output frequency, and input displacement power factor. The model is in the qdo reference frame for the matrix converter input and output voltage and current fundamental components. The validity of this model is confirmed by comparing the results obtained from the developed model and a simplified fundamental-frequency equivalent circuit-based model. In developing the overall dynamic model of the proposed wind turbine system, individual models of the mechanical aerodynamic conversion, drive train, matrix converter, and squirrel-cage induction generator are developed and combined to enable steady-state and transient simulations of the overall system. In addition, the constraint constant V/f strategy is included in the final dynamic model. The model is intended to be useful for controller design purposes. The dynamic behavior of the model is investigated by simulating the response of the overall model to step changes in selected input variables. Moreover, a linearized model of the system is developed at a typical operating point, and stability, controllability, and observability of the system are investigated. Two control design methods are adopted for the design of the closed-loop controller: a state-feedback controller and an output feedback controller. The state-feedback controller is designed based on the Linear Quadratic method. An observer block is used to estimate the states in the state-feedback controller. Two other controllers based on transfer-function techniques and output feedback are developed for the wind turbine system. Finally, a maximum power point tracking method, referred to as mechanical speed-sensorless power signal feedback, is developed for the wind turbine system under study to control the matrix converter control variables in order to capture the maximum wind energy without measuring the wind velocity or the turbine shaft speed.
Book Synopsis Incorporating DFIG-based Wind Power Generator in Microgird Frequency Stabilization by : Mohammadreza Fakhari Moghadam Arani
Download or read book Incorporating DFIG-based Wind Power Generator in Microgird Frequency Stabilization written by Mohammadreza Fakhari Moghadam Arani and published by . This book was released on 2011 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although wind power as a renewable energy is assumed to be an all-round advantageous source of energy, its intermittent nature can cause difficulties, especially in the islanding mode of operation. Conventional synchronous generators can help to compensate for wind fluctuations, but the slow behavior of such systems may result in stability concerns. In this study, the virtual inertia method, which imitates the kinetic inertia of a synchronous generator, is used to improve the system's dynamic behavior. Since the proposed method incorporates no long-term power regulation, it requires no mass storage device and is thus economical. To preclude additional costs, a rotating mass connected to the Doubly Fed Induction Generator (DFIG) shaft or a super-capacitor connected to the DC-link on a back-to-back converter of a wind power generator could be used. The concept and the proposed control methods are discussed in detail, and eigen-value analysis is used to study how the proposed method improves system stability. As well, the advantages and disadvantages of using DFIG rotating mass or a super-capacitor as the virtual inertia source are compared. The proposed approach also shows that while virtual inertia is not incorporated directly in long-term frequency and power regulation, it may indirectly enhance the system's steady-state behavior. A time domain simulation is used to verify the results of the analytical studies.
Book Synopsis Selected References on Small Wind Energy Conversion Systems by : DOE Rocky Flats Wind Systems Program
Download or read book Selected References on Small Wind Energy Conversion Systems written by DOE Rocky Flats Wind Systems Program and published by . This book was released on 1980 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Wind Power in Power Systems by : Thomas Ackermann
Download or read book Wind Power in Power Systems written by Thomas Ackermann and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the highly acclaimed Wind Power in Power Systems has been thoroughly revised and expanded to reflect the latest challenges associated with increasing wind power penetration levels. Since its first release, practical experiences with high wind power penetration levels have significantly increased. This book presents an overview of the lessons learned in integrating wind power into power systems and provides an outlook of the relevant issues and solutions to allow even higher wind power penetration levels. This includes the development of standard wind turbine simulation models. This extensive update has 23 brand new chapters in cutting-edge areas including offshore wind farms and storage options, performance validation and certification for grid codes, and the provision of reactive power and voltage control from wind power plants. Key features: Offers an international perspective on integrating a high penetration of wind power into the power system, from basic network interconnection to industry deregulation; Outlines the methodology and results of European and North American large-scale grid integration studies; Extensive practical experience from wind power and power system experts and transmission systems operators in Germany, Denmark, Spain, UK, Ireland, USA, China and New Zealand; Presents various wind turbine designs from the electrical perspective and models for their simulation, and discusses industry standards and world-wide grid codes, along with power quality issues; Considers concepts to increase penetration of wind power in power systems, from wind turbine, power plant and power system redesign to smart grid and storage solutions. Carefully edited for a highly coherent structure, this work remains an essential reference for power system engineers, transmission and distribution network operator and planner, wind turbine designers, wind project developers and wind energy consultants dealing with the integration of wind power into the distribution or transmission network. Up-to-date and comprehensive, it is also useful for graduate students, researchers, regulation authorities, and policy makers who work in the area of wind power and need to understand the relevant power system integration issues.
Book Synopsis Analysis of Electric Machinery and Drive Systems by : Paul C. Krause
Download or read book Analysis of Electric Machinery and Drive Systems written by Paul C. Krause and published by John Wiley & Sons. This book was released on 2013-06-17 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, this volume goes a step further, introducing new material relevant to machine design along with numerous techniques for making the derivation of equations more direct and easy to use. Coverage includes: Completely new chapters on winding functions and machine design that add a significant dimension not found in any other text A new formulation of machine equations for improving analysis and modeling of machines coupled to power electronic circuits Simplified techniques throughout, from the derivation of torque equations and synchronous machine analysis to the analysis of unbalanced operation A unique generalized approach to machine parameters identification A first-rate resource for engineers wishing to master cutting-edge techniques for machine analysis, Analysis of Electric Machinery and Drive Systems is also a highly useful guide for students in the field.
