Technology Development For Iron Fischer Tropsch Catalysts Final Technical Report December 18 1990 December 17 1993

Author :
Publisher :
ISBN 13 :
Total Pages : 18 pages
Book Rating : 4.:/5 (685 download)

DOWNLOAD NOW!

Download or read book Technology Development for Iron Fischer-Tropsch Catalysts. Quarterly Technical Progress Report for Period Ending December 1993 written by and published by . This book was released on 1993 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conversion data as a function of time of synthesis for the two catalysts are shown in Figures 2 and 3. In general the precipitated catalyst is more active than the iron carbide catalyst with syn-gas conversions starting at 80% as compared to 50% for the latter; however, both catalysts deactivated with increasing reaction time. A comparison of the C2, C3 and C4 olefin selectivities at 26% CO conversion (precipitated catalyst-336 hr of synthesis, iron carbide catalyst-122 hr of synthesis) are shown in Figure 4. Surprisingly the precipitated catalyst had a higher olefin content than the iron carbide catalyst. It has been reported that a similar iron carbide catalyst has higher selectivity for the production of olefins than a ''conventionally prepared'' Fe/Co catalyst. The discrepancy may be due in part to comparing the olefin selectivity of the two catalysts at different conversions. Their ''conventional catalyst'' had a C2-C4 olefin content of 37% at 72% conversion compared to 86% olefin at 55% conversion for the iron carbide catalyst. In general the olefin selectivity of a catalyst is highest at low conversions. The iron carbide catalyst of this study produces more hydrocarbons than the precipitated catalyst; furthermore, it produces a higher fraction of C3 + (86% vs. 84%) and C5+ (67% vs. 61%) hydrocarbons (Figure 5). Correspondingly, the iron carbide catalyst produces less methane and ethane than the precipitated catalyst (Figure 6). These hydrocarbon and C5+ selectivities are similar to those reported earlier.