Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Sol Gel Chemistry As A Synthetic Tool For Studying The Effects Of Homogeneity On Mixed Oxide Catalytic Materials
Download Sol Gel Chemistry As A Synthetic Tool For Studying The Effects Of Homogeneity On Mixed Oxide Catalytic Materials full books in PDF, epub, and Kindle. Read online Sol Gel Chemistry As A Synthetic Tool For Studying The Effects Of Homogeneity On Mixed Oxide Catalytic Materials ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Sol-gel Chemistry as a Synthetic Tool for Studying the Effects of Homogeneity on Mixed Oxide Catalytic Materials by : James Bruce Miller
Download or read book Sol-gel Chemistry as a Synthetic Tool for Studying the Effects of Homogeneity on Mixed Oxide Catalytic Materials written by James Bruce Miller and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Dissertation Abstracts International by :
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2007 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Sol-Gel Materials by : John D. Wright
Download or read book Sol-Gel Materials written by John D. Wright and published by CRC Press. This book was released on 2018-10-03 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel processing methods, first used historically for decorative and constructional materials, were extensively developed in the last century for applications such as glasses, ceramics, catalysts, coatings, composites and fibres. Today they are reaching their full potential, enabling the preparation of new generations of advanced materials not easily accessible by other methods yet using mild, low-energy conditions. The topic is therefore increasingly included in advanced undergraduate, MSc and PhD programmes in the areas of chemistry, physics and materials science. This concise introductory text, written at the advanced undergraduate/first-year postgraduate level, is also suitable as an introduction to the development, mechanisms, chemistry, characterisation methods and applications of the technique. It provides readers with an extensive yet concise grounding in the theory of each area of the subject and details the real and potential applications and the future prospects of sol-gel chemistry.
Book Synopsis Metal Oxides in Heterogeneous Catalysis by : Jacques C. Vedrine
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Book Synopsis American Doctoral Dissertations by :
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1995 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Introduction to Sol-Gel Processing by : Alain C. Pierre
Download or read book Introduction to Sol-Gel Processing written by Alain C. Pierre and published by Springer Nature. This book was released on 2020-03-10 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad, general introduction to the processing of Sol-Gel technologies. This updated volume serves as a general handbook for researchers and students entering the field. This new edition provides updates in fields that have undergone rapid developments, such as Ceramics, Catalysis, Chromatropgraphy, biomaterials, glass science, and optics. It provides a simple, compact resource that can also be used in graduate-level materials science courses.
Book Synopsis Atomic Layer Deposition of Nanostructured Materials by : Nicola Pinna
Download or read book Atomic Layer Deposition of Nanostructured Materials written by Nicola Pinna and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic layer deposition, formerly called atomic layer epitaxy, was developed in the 1970s to meet the needs of producing high-quality, large-area fl at displays with perfect structure and process controllability. Nowadays, creating nanomaterials and producing nanostructures with structural perfection is an important goal for many applications in nanotechnology. As ALD is one of the important techniques which offers good control over the surface structures created, it is more and more in the focus of scientists. The book is structured in such a way to fi t both the need of the expert reader (due to the systematic presentation of the results at the forefront of the technique and their applications) and the ones of students and newcomers to the fi eld (through the first part detailing the basic aspects of the technique). This book is a must-have for all Materials Scientists, Surface Chemists, Physicists, and Scientists in the Semiconductor Industry.
Book Synopsis Metal Oxide Nanoparticles in Organic Solvents by : Markus Niederberger
Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.
Book Synopsis Structure-Activity and Selectivity Relationships in Heterogeneous Catalysis by : R.K. Grasselli
Download or read book Structure-Activity and Selectivity Relationships in Heterogeneous Catalysis written by R.K. Grasselli and published by Elsevier. This book was released on 1991-07-09 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure plays an important role in heterogeneous catalysis. It provides a framework for the arrangement and stragetic placement of key catalytic elements, hosting them in a prescribed manner so that their respective electronic properties can exhibit their desired catalytic functions and mutual interactions. Under reaction conditions these framework structures and their catalytic guests undergo dynamic processes becoming active participants of the overall catalytic process. They are not mere static geometric forms. The dynamics of catalytic structures are particularly vivid in selective oxidation catalysis where the lattice of a given catalytic solid partakes as a whole, not only its surface, in the redox processes of the reaction. The catalyst becomes actually a participating reagent. By proper choice of key catalytic elements and their host structures, preferred catalytic pathways can be selected over less desired ones. However, not only in selective redox catalysis does structure play an important role, its importance is also well documented, among others, in shape selective zeolite catalysis, enantioselective hydrogenation and hydrodesulfurization. The contributions presented in this book address the dynamic character of the solid state under catalytic reaction conditions. By relating structure to activity and selectivity in heterogeneous catalysis our understanding of such correlations has been significantly enhanced through the use of sophisticated spectroscopic means, surface science and modeling.
Author :Michel Andre Aegerter Publisher :Springer Science & Business Media ISBN 13 :0387889531 Total Pages :474 pages Book Rating :4.3/5 (878 download)
Book Synopsis Sol-Gel Technologies for Glass Producers and Users by : Michel Andre Aegerter
Download or read book Sol-Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.
Book Synopsis Polymer Electrolyte Fuel Cell Degradation by : Matthew M. Mench
Download or read book Polymer Electrolyte Fuel Cell Degradation written by Matthew M. Mench and published by Academic Press. This book was released on 2012 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: For full market implementation of PEM fuel cells to become a reality, two main limiting technical issues must be overcome- cost and durability. This cutting-edge volume directly addresses the state-of-the-art advances in durability within every fuel cell stack component. [...] chapters on durability in the individual fuel cell components -- membranes, electrodes, diffusion media, and bipolar plates -- highlight specific degradation modes and mitigation strategies. The book also includes chapters which synthesize the component-related failure modes to examine experimental diagnostics, computational modeling, and laboratory protocol"--Back cover.
Book Synopsis Fine Chemicals Manufacture by : A. Cybulski
Download or read book Fine Chemicals Manufacture written by A. Cybulski and published by Gulf Professional Publishing. This book was released on 2001-12-10 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sector of fine chemicals, including pharmaceuticals, agrochemicals, dyes and pigments, fragrances and flavours, intermediates, and performance chemicals is growing fast. For obvious reasons chemistry is a key to the success in developing new processes for fine chemicals. However, as a rule, chemists formulate results of their work as recipes, which usually lack important information for process development. Fine Chemicals Manufacture, Technology and Engineering is intended to show what is needed to make the recipe more useful for process development purposes and to transform the recipe into an industrial process that will be safe, environmentally friendly, and profitable.The goal of this book is to form a bridge between chemists and specialists of all other branches involved in the scale-up of new processes or modification of existing processes with both a minimum effort and risk and maximum profit when commercializing the process. New techniques for scale-up and optimization of existing processes and improvements in the utilization of process equipment that have been developed in recent years are presented in the book.
Book Synopsis Nanoscale Materials by : Luis M. Liz-Marzán
Download or read book Nanoscale Materials written by Luis M. Liz-Marzán and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized nanoassemblies of inorganic nanoparticles and organic molecules are building blocks of nanodevices, whether they are designed to perform molecular level computing, sense the environment or improve the catalytic properties of a material. The key to creation of these hybrid nanostructures lies in understanding the chemistry at a fundamental level. This book serves as a reference book for researchers by providing fundamental understanding of many nanoscopic materials.
Book Synopsis Sol-Gel Science by : C. Jeffrey Brinker
Download or read book Sol-Gel Science written by C. Jeffrey Brinker and published by Academic Press. This book was released on 2013-10-22 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing presents the physical and chemical principles of the sol-gel process. The book emphasizes the science behind sol-gel processing with a chapter devoted to applications. The first chapter introduces basic terminology, provides a brief historical sketch, and identifies some excellent texts for background reading. Chapters 2 and 3 discuss the mechanisms of hydrolysis and condensation for nonsilicate and silicate systems. Chapter 4 deals with stabilization and gelation of sols. Chapter 5 reviews theories of gelation and examines the predicted and observed changes in the properties of a sol in the vicinity of the gel point. Chapter 6 describes the changes in structure and properties that occur during aging of a gel in its pore liquor (or some other liquid). The discussion of drying is divided into two parts, with the theory concentrated in Chapter 7 and the phenomenology in Chapter 8. The structure of dried gels is explored in Chapter 9. Chapter 10 shows the possibility of using the gel as a substrate for chemical reactions or of modifying the bulk composition of the resulting ceramic by performing a surface reaction (such as nitridation) on the gel. Chapter 11 reviews the theory and practice of sintering, describing the mechanisms that govern densification of amorphous and crystalline materials, and showing the advantages of avoiding crystallization before sintering is complete. The properties of gel-derived and conventional ceramics are discussed in Chapter 12. The preparation of films is such an important aspect of sol-gel technology that the fundamentals of film formation are treated at length in Chapter 13. Films and other applications are briefly reviewed in Chapter 14. Materials scientists and researchers in the field of sol-gel processing will find the book invaluable.
Book Synopsis Chemical Solution Deposition of Functional Oxide Thin Films by : Theodor Schneller
Download or read book Chemical Solution Deposition of Functional Oxide Thin Films written by Theodor Schneller and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.
Book Synopsis Green Chemical Reactions by : Pietro Tundo
Download or read book Green Chemical Reactions written by Pietro Tundo and published by Springer Science & Business Media. This book was released on 2008-05-22 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Chemistry is an inventive science based on fundamental research towards the development of new sustainable chemical processes. There is a great need to create a new type of chemistry focused on a new production system, in order to prepare the younger generation to get a greener future. The globalization pushes the chemistry community to adopt ethical issues. In this prospect Green Chemistry can achieve the approval of the society by teaching students to be confident in science and at the same time by convincing people that it is possible to attain technological development with respect and care for the environment we live in. This is why it is of foremost importance that education and fundamental research remain strictly connected, so that democracy and development can grow and progress side by side. This book has been prepared to extend the knowledge of Green Chemistry not disregarding, however, the industrial interest. It is the result of the effort to put together and share the expertise of leading practitioners in the field of Green Chemistry. The Interuniversity Consortium ‘Chemistry for the Environment’ is a non-profit organisation established in 1993 in Italy. At present it includes 31 member universities and 80 research units.
Book Synopsis Sol-Gel Processing and Applications by : Y.A. Attia
Download or read book Sol-Gel Processing and Applications written by Y.A. Attia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: During my professional career, I developed a strong interest in sol-gel technology, and worked on both xerogel and aerogel systems. My fascination with aerogels has driven me to explore their commercial potential, which is currently an important component of my company's business plan. Together with my co-workers, I have also worked on the preparation of controlled PZT and silica xerogels as well as thin film coatings of metals by the sol-gel technology, These experiences convinced me of the tremendous potentials of this technology. A conviction that is shared by many scientists, engineers, and business leaders around the globe. Many sol-gel derived products are already articles of commerce. However, to expand the commercial potential of sol-gel technology, two challenges must be met: (1) the quality of sol-gel derived products must continue to meet or exceed the quality of competing products, (2) the production cost of sol-gel products (specially aerogels) must continued to decline. A key to lowering the costs of sol-gel products is finding inexpensive precursors.
