Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Software Engineering For Manufacturing Systems
Download Software Engineering For Manufacturing Systems full books in PDF, epub, and Kindle. Read online Software Engineering For Manufacturing Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Software Engineering for Manufacturing Systems by : A. Storr
Download or read book Software Engineering for Manufacturing Systems written by A. Storr and published by Springer. This book was released on 2013-03-09 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software has become a decisive cost and time factor in regard to developing and establishing manufacturing systems and setting them into operation. In addition, software determines the availability, reliability as well as functionality of manufacturing units. Software Engineering for Manufacturing Systems considers the methods and procedures required to deal with problems in the software engineering of control technology for manufacturing systems. Significantly, the following topics are addressed: * definitions and requirements of software for control technology * system design, describing forms of control software * CASE tools for the generation of a code * configuration, adaption of standard software variants, and re-usability of software * and man-machine interface. It contains the selected proceedings of the International Conference on Software Engineering and Case Tools for Control Technology of Manufacturing Systems, sponsored by the IFIP and held in Germany, in March 1996.
Book Synopsis Software Engineering for Manufacturing Systems by : A. Storr
Download or read book Software Engineering for Manufacturing Systems written by A. Storr and published by . This book was released on 2014-01-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Production Software That Works by : Ann Courtright
Download or read book Production Software That Works written by Ann Courtright and published by Elsevier. This book was released on 2016-01-26 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This useful reference addresses the key tasks that are integral to realtime software development in manufacturing plants: managing the design of the system, setting up and coordinating a development organization, and implementing tools for successful completion and management. Both new and experienced project managers will discover how to use concurrent methodologies to create realtime systems in half the time it usually takes.
Book Synopsis Requirements Engineering for Software and Systems by : Phillip A. Laplante
Download or read book Requirements Engineering for Software and Systems written by Phillip A. Laplante and published by CRC Press. This book was released on 2011-03-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid requirements engineering has become increasingly essential to on-time and on-budget delivery of software and systems projects. As more engineering programs make it a mandatory part of their curricula, students and working engineers require significant training to master the field, especially the complicated emerging ancillary software tools vital to the requirements engineering process. With a focus on software-intensive systems, Requirements Engineering for Software and Systems provides a probing and comprehensive review of recent developments in intelligent systems, soft computing techniques, and their diverse applications in manufacturing. Topics covered can be applied to the requirements engineering practices for: Advanced production machines and systems Collaborative and responsive manufacturing systems Digital manufacturing E-manufacturing E-business and virtual enterprises Fit manufacturing Human machine interfaces Innovative design technologies Intelligent and competitive manufacturing Intelligent planning and scheduling systems Mechatronics and MEMS Micro and nano manufacturing Production automation and control Reconfigurable manufacturing systems Sustainable manufacturing systems Robotics To illustrate key ideas associated with requirements engineering, the text presents three common example systems: an airline baggage handling system, a point-of-sale system for one location of a large pet store chain, and a system for a smart home in which one or more PCs control various aspects of the home’s functions. The selected systems encompass a wide range of applications—from embedded to organic, for both industrial and consumer uses.
Book Synopsis Re-Engineering the Manufacturing System by : Robert E. Stein
Download or read book Re-Engineering the Manufacturing System written by Robert E. Stein and published by CRC Press. This book was released on 2003-06-03 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.
Book Synopsis Re-Engineering the Manufacturing System by : Robert E. Stein
Download or read book Re-Engineering the Manufacturing System written by Robert E. Stein and published by CRC Press. This book was released on 2003-06-03 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.
Book Synopsis Object-oriented Software for Manufacturing Systems by : S. Adiga
Download or read book Object-oriented Software for Manufacturing Systems written by S. Adiga and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: I must confess that I stumbled upon the object-oriented (00) world view during my explorations into the world of artificial intelligence (AI) in search of a new solution to the problem of building computer-integrated manufacturing systems (CIM). In 00 computing, I found the constructs to model the manufacturing enterprise in terms of information, a resource that is common to all activities in an organization. It offered a level of modularity, and the coupling/binding neces sary for fostering integration without placing undue restrictions on what the individual applications can do. The implications of 00 computing are more extensive than just being a vehicle for manufacturing applications. Leaders in the field such as Brad Cox see it introducing a paradigm shift that will change our world gradually, but as radically as the Industrial Revolution changed manufacturing. However, it must be borne in mind that simply using an object-oriented language or environment does not, in itself, ensure success in one's applications. It requires a different way of thinking, design discipline, techniques, and tools to exploit what the technology has to offer. In other words, it calls for a paradigm shift (as defined by Kuhn in The Structure of Scientific Revolution, a classic text in the history of science).
Book Synopsis Strategic Management of the Manufacturing Value Chain by : Umit S. Bititci
Download or read book Strategic Management of the Manufacturing Value Chain written by Umit S. Bititci and published by Springer. This book was released on 2013-06-05 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today the Scottish electronics industry employs 40,000 people directly and a further 30,000 in the supply infrastructure. There are now more than 550 electronic manufacturing and supplier companies in ' Silicon Glen'. In terms of the contribution to the economy, electronics is by far the most valuable industry. Its value in 1996 was approximately £ 10billion and accounted for more than half of Scotland's exports. The major product groupings within the industry include: • PCs, laptops and workstations • Disk drives, cable harnessing • Printers, keyboards and peripherals • Semiconductor devices and PCBs • TV, VCRs, CDs, stereos and other consumer electronics • Cellular phones and telecommunications products • A TMs and funds transfer systems • Networking and security systems • Navigation and sonar systems • Microwave products • Power supplies • Software and compilers Many of these companies are multi-national OEMs, who came to Scotland as inward investing companies. Early inward investing companies were from USA, followed by companies from Japan, and more recently from Taiwan and Korea. An important segment of the industry is involved in the manufacture of computers, including IBM, Compaq, Digital and Sun. In fact approximately 40% of the PCs sold in Europe are built in Scotland. With five of the world's top eight computer manufacturers locating a manufacturing base in Scotland there has been an attraction for foreign companies keen to provide service for these multinationals. In 1995/96 the supply base output was worth £1.
Book Synopsis Computer control of flexible manufacturing systems by : S. Joshi
Download or read book Computer control of flexible manufacturing systems written by S. Joshi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the approach of the 21st century, and the current trends in manufacturing, the role of computer-controlled flexible manufacturing an integral part in the success of manufacturing enterprises. will take Manufacturing environments are changing to small batch (with batch sizes diminishing to a quantity of one), larger product variety, produc tion on demand with low lead times, with the ability to be 'agile.' This is in stark contrast to conventional manufacturing which has relied on economies of scale, and where change is viewed as a disruption and is therefore detrimental to production. Computer integrated manufac turing (CIM) and flexible manufacturing practices are a key component in the transition from conventional manufacturing to the 'new' manu facturing environment. While the use of computers in manufacturing, from controlling indi vidual machines (NC, Robots, AGVs etc.) to controlling flexible manu facturing systems (FMS) has advanced the flexibility of manufacturing environments, it is still far from reaching its full potential in the environment of the future. Great strides have been made in individual technologies and control of FMS has been the subject of considerable research, but computerized shop floor control is not nearly as flexible or integrated as hyped in industrial and academic literature. In fact, the integrated systems have lagged far behind what could be achieved with existing technology.
Book Synopsis Computer-Aided Design, Engineering, and Manufacturing by : Cornelius T. Leondes
Download or read book Computer-Aided Design, Engineering, and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-12-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.
Book Synopsis Design and Analysis of Integrated Manufacturing Systems by : W. Dale Compton
Download or read book Design and Analysis of Integrated Manufacturing Systems written by W. Dale Compton and published by National Academies Press. This book was released on 1988-02-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.
Book Synopsis Computer-Aided Design, Engineering, and Manufacturing by : Cornelius T. Leondes
Download or read book Computer-Aided Design, Engineering, and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-08-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standa
Book Synopsis Manufacturing Systems Design and Analysis by : Bin Wu
Download or read book Manufacturing Systems Design and Analysis written by Bin Wu and published by . This book was released on 1992 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Integrated Manufacturing Systems Engineering by : Pierre Ladet
Download or read book Integrated Manufacturing Systems Engineering written by Pierre Ladet and published by Springer. This book was released on 2013-06-29 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern manufacturing systems must be engineered as any other complex systems, especially in the context of their integration. The book first presents the all-embracing concept of the Extended Enterprise as way of inter-enterprise integration. It then focusses on Enterprise Engineering methods and tools to address intra-enterprise integration using a model-based approach. Business process modelling and re-engineering isssues are particularly discussed and tools presented. Formal specification and Petri net-based analysis methods for manufacturing systems complete the set of tools for Enterprise Engineering. Coordination and integration issues of manufacturing systems and their business processes are then covered and examples of integration platforms presented. Finally, standardization and pre-standardization issues related to enterprise modelling and integration conclude the book.
Book Synopsis Computer Applications for Software Engineering, Disaster Recovery, and Business Continuity by : Tai-hoon Kim
Download or read book Computer Applications for Software Engineering, Disaster Recovery, and Business Continuity written by Tai-hoon Kim and published by Springer. This book was released on 2012-11-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the refereed proceedings of the International Conferences, ASEA and DRBC 2012, held in conjunction with GST 2012 on Jeju Island, Korea, in November/December 2012. The papers presented were carefully reviewed and selected from numerous submissions and focus on the various aspects of advanced software engineering and its applications, and disaster recovery and business continuity.
Book Synopsis Manufacturing Systems by : George Chryssolouris
Download or read book Manufacturing Systems written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.
Book Synopsis Computer Aided and Integrated Manufacturing Systems by : Cornelius T. Leondes
Download or read book Computer Aided and Integrated Manufacturing Systems written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.
