Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Proceedings Of The European Materials Research Society 2001 Symposium M Stress And Strain In Heteroepitaxy Strasbourg France June 5 8 2001
Download Proceedings Of The European Materials Research Society 2001 Symposium M Stress And Strain In Heteroepitaxy Strasbourg France June 5 8 2001 full books in PDF, epub, and Kindle. Read online Proceedings Of The European Materials Research Society 2001 Symposium M Stress And Strain In Heteroepitaxy Strasbourg France June 5 8 2001 ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Photovoltaic and Photoactive Materials by : Joseph M. Marshall
Download or read book Photovoltaic and Photoactive Materials written by Joseph M. Marshall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this NATO Advanced Study Institute (ASI) was to present an up-to-date overview of various current areas of interest in the field of photovoltaic and related photoactive materials. This is a wide-ranging subject area, of significant commercial and environmental interest, and involves major contributions from the disciplines of physics, chemistry, materials, electrical and instrumentation engineering, commercial realisation etc. Therefore, we sought to adopt an inter disciplinary approach, bringing together recognised experts in the various fields while retaining a level of treatment accessible to those active in specific individual areas of research and development. The lecture programme commenced with overviews of the present relevance and historical development of the subject area, plus an introduction to various underlying physical principles of importance to the materials and devices to be addressed in later lectures. Building upon this, the ASI then progressed to more detailed aspects of the subject area. We were also fortunately able to obtain a contribution from Thierry Langlois d'Estaintot of the European Commission Directorate, describing present and future EC support for activities in this field. In addition, poster sessions were held throughout the meeting, to allow participants to present and discuss their current activities. These were supported by what proved to be very effective feedback sessions (special thanks to Martin Stutzmann), prior to which groups of participants enthusiastically met (often in the bar) to identify and agree topics of common interest.
Book Synopsis Organic Nanostructures for Next Generation Devices by : Katharina Al-Shamery
Download or read book Organic Nanostructures for Next Generation Devices written by Katharina Al-Shamery and published by Springer Science & Business Media. This book was released on 2007-12-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This jaw-dropping window on the future is the first comprehensive overview of the fabrication, fundamental properties, and applications of a new class of nanoscaled organic materials. These materials offer incredible scope to scientists wanting to exploit their optical and electronic properties and offer the potential to create a new generation of tiny devices with powerful applications. Altogether, the book offers a unique integration of organic materials science basics, nanostructured organic materials fabrication, and device applications.
Book Synopsis Photonic Crystals: Physics and Technology by : Concita Sibilia
Download or read book Photonic Crystals: Physics and Technology written by Concita Sibilia and published by Springer Science & Business Media. This book was released on 2009-02-03 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the work is give an overview of the activity in the field of Photonic Crystal developed in the frame of COST P11 action . The main objective of the COST P11 action was to unify and coordinate national efforts aimed at studying linear and nonlinear optical interactions with Photonic Crystals (PCs), without neglecting an important aspect related to the material research as idea and methods of realizations of 3D PC, together with the development and implementation of measurement techniques for the experimental evaluation of their potential applications in different area, as for example telecommunication with novel optical fibers, lasers, nonlinear multi-functionality, display devices, opto-electronics, sensors. The book contains contributions from authors who gave their lecture at the Cost P11 Training School.
Book Synopsis Gallium Oxide by : Masataka Higashiwaki
Download or read book Gallium Oxide written by Masataka Higashiwaki and published by Springer Nature. This book was released on 2020-04-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the new wide-bandgap semiconductor gallium oxide (Ga2O3). Ga2O3 has been attracting much attention due to its excellent materials properties. It features an extremely large bandgap of greater than 4.5 eV and availability of large-size, high-quality native substrates produced from melt-grown bulk single crystals. Ga2O3 is thus a rising star among ultra-wide-bandgap semiconductors and represents a key emerging research field for the worldwide semiconductor community. Expert chapters cover physical properties, synthesis, and state-of-the-art applications, including materials properties, growth techniques of melt-grown bulk single crystals and epitaxial thin films, and many types of devices. The book is an essential resource for academic and industry readers who have an interest in, or plan to start, a new R&D project related to Ga2O3.
Book Synopsis Fundamentals of Microfabrication and Nanotechnology, Three-Volume Set by : Marc J. Madou
Download or read book Fundamentals of Microfabrication and Nanotechnology, Three-Volume Set written by Marc J. Madou and published by CRC Press. This book was released on 2018-12-14 with total page 1983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.
Book Synopsis Microfabrication and Nanomanufacturing by : Mark J. Jackson
Download or read book Microfabrication and Nanomanufacturing written by Mark J. Jackson and published by CRC Press. This book was released on 2005-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.
Book Synopsis Oxide Semiconductors: Volume 1633 by : Steve Durbin
Download or read book Oxide Semiconductors: Volume 1633 written by Steve Durbin and published by Materials Research Society. This book was released on 2014-07-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium R, "Oxide Semiconductors" was held December 1-6 at the 2013 MRS Fall Meeting in Boston, Massachusetts. Oxide semiconductors are poised to take a more active role in modern electronics, particularly in the field of thin film transistors. While many advances have been made in terms of our understanding of fundamental optical and electronic characteristics, there remain many questions in terms of defects, doping, and optimal growth/synthesis conditions. This symposium proceedings volume represents recent advances in growth and characterization of a number of different oxide semiconductors, as well as device fabrication.
Book Synopsis Structure and Properties of Liquid Crystals by : Lev M. Blinov
Download or read book Structure and Properties of Liquid Crystals written by Lev M. Blinov and published by Springer Science & Business Media. This book was released on 2010-10-26 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by Lev M. Blinov is ideal to guide researchers from their very first encounter with liquid crystals to the level where they can perform independent experiments on liquid crystals with a thorough understanding of their behaviour also in relation to the theoretical framework. Liquid crystals can be found everywhere around us. They are used in virtually every display device, whether it is for domestic appliances of for specialized technological instruments. Their finely tunable optical properties make them suitable also for thermo-sensing and laser technologies. There are many monographs written by prominent scholars on the subject of liquid crystals. The majority of them presents the subject in great depth, sometimes focusing on a particular research aspect, and in general they require a significant level of prior knowledge. In contrast, this books aims at an audience of advanced undergraduate and graduate students in physics, chemistry and materials science. The book consists of three parts: the first part, on structure, starts from the fundamental principles underlying the structure of liquid crystals, their rich phase behaviour and the methods used to study them; the second part, on physical properties, emphasizes the influence of anisotropy on all aspects of liquid crystals behaviour; the third, focuses on electro-optics, the most important properties from the applications standpoint. This part covers only the main effects and illustrates the underlying principles in greater detail. Professor Lev M. Blinov has had a long carrier as an experimentalist. He made major contributions in the field of ferroelectric mesophases. In 1985 he received the USSR state prize for investigations of electro-optical effects in liquid crystals for spatial light modulators. In 1999 he was awarded the Frederiks medal of the Soviet Liquid Crystal Society and in 2000 he was honoured with the G. Gray silver medal of the British Liquid Crystal Society. He has held many visiting academic positions in universities and laboratories across Europe and in Japan.
Book Synopsis Applied Photovoltaics by : Stuart R. Wenham
Download or read book Applied Photovoltaics written by Stuart R. Wenham and published by Routledge. This book was released on 2013-01-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this thoroughly considered textbook provides a reliable, accessible and comprehensive guide for students of photovoltaic applications and renewable energy engineering. Written by a group of award-winning authors it is brimming with information and is carefully designed to meet the needs of its readers. Along with exercises and references at the end of each chapter, it features a set of detailed technical appendices that provide essential equations, data sources and standards. The new edition has been fully updated with the latest information on photovoltaic cells, modules, applications and policy. Starting from basics with 'The Characteristics of Sunlight' the reader is guided step-by-step through semiconductors and p-n junctions; the behaviour of solar cells; cell properties and design; and PV cell interconnection and module fabrication. The book covers stand-alone photovoltaic systems; specific purpose photovoltaic systems; remote area power supply systems; grid-connected photovoltaic systems and water pumping. Applied Photovoltaics is highly illustrated and very accessible, providing the reader with all the information needed to start working with photovoltaics.
Download or read book Defects in Semiconductors written by and published by Academic Press. This book was released on 2015-06-08 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, number 91 in the Semiconductor and Semimetals series, focuses on defects in semiconductors. Defects in semiconductors help to explain several phenomena, from diffusion to getter, and to draw theories on materials' behavior in response to electrical or mechanical fields. The volume includes chapters focusing specifically on electron and proton irradiation of silicon, point defects in zinc oxide and gallium nitride, ion implantation defects and shallow junctions in silicon and germanium, and much more. It will help support students and scientists in their experimental and theoretical paths. - Expert contributors - Reviews of the most important recent literature - Clear illustrations - A broad view, including examination of defects in different semiconductors
Book Synopsis Growth and Coarsening by : Lorenz Ratke
Download or read book Growth and Coarsening written by Lorenz Ratke and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: 100 years after the first observation of ripening by Ostwald and 40 years after the first publication of a theory describing this process, this monograph presents in a self-consistent and comprehensive manner, all the bits and pieces of coarsening theories so that the main issues and the underlying mathematics of self-similar coarsening of dispersed systems can be understood. Rather than giving a complete survey of the field, it presents a careful derivation of the existing results and places them into some perspective.
Book Synopsis Nanocarbon Electrochemistry by : Nianjun Yang
Download or read book Nanocarbon Electrochemistry written by Nianjun Yang and published by John Wiley & Sons. This book was released on 2019-11-14 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the field of nanocarbon electrochemistry The discoveries of new carbon materials such as fullerene, graphene, carbon nanotubes, graphene nanoribbon, carbon dots, and graphdiyne have triggered numerous research advances in the field of electrochemistry. This book brings together up-to-date accounts of the recent progress, developments, and achievements in the electrochemistry of different carbon materials, focusing on their unique properties and various applications. Nanocarbon Electrochemistry begins by looking at the studies of heterogeneous electron transfer at various carbon electrodes when redox-active molecules are reversibly and specifically adsorbed on the carbon electrode surface. It then covers electrochemical energy storage applications of various carbon materials, particularly the construction and performance of supercapacitors and batteries by use of graphene and related materials. Next, it concentrates on electrochemical energy conversion applications where electrocatalysis at 0D, 1D, 2D, and 3D carbon materials nanocarbon materials is highlighted. The book finishes with an examination of the contents of electrogenerated chemiluminescence and photoelectrochemical pollutant degradation by use of diamond and related carbon materials. Covers the fundamental properties of different carbon materials and their applications across a wide range of areas Provides sufficient background regarding different applications, which contributes to the understanding of specialists and non-specialists Examines nanoelectrochemistry of adsorption-coupled electron transfer at carbon electrodes; graphene and graphene related materials; diamond electrodes for the electrogenerated chemiluminescence; and more Features contributions from an international team of distinguished researchers Nanocarbon Electrochemistry is an ideal book for students, researchers, and industrial partners working on many diverse fields of electrochemistry, whether they already make frequent use of carbon electrodes in one form of another or are looking at electrodes for new applications.
Book Synopsis Molecular Beam Epitaxy by : John Wilfred Orton
Download or read book Molecular Beam Epitaxy written by John Wilfred Orton and published by . This book was released on 2015 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a history of Molecular Beam Epitaxy (MBE) as applied to the growth of semiconductor thin films (note that it does not cover the subject of metal thin films). It begins by examining the origins of MBE, first of all looking at the nature of molecular beams and considering their application to fundamental physics, to the development of nuclear magnetic resonance and to the invention of the microwave MASER. It shows how molecular beams of silane (SiH4) were used to study the nucleation of silicon films on a silicon substrate and how such studies were extended to compound semiconductors such as GaAs. From such surface studies in ultra-high vacuum the technique developed into a method of growing high quality single crystal films of a wide range of semiconductors. Comparing this with earlier evaporation methods of deposition and with other epitaxial deposition methods such as liquid phase and vapour phase epitaxy (LPE and VPE). The text describes the development of MBE machines from the early 'home-made' variety to that of commercial equipment and show how MBE was gradually refined to produce high quality films with atomic dimensions. This was much aided by the use of various in-situ surface analysis techniques, such as reflection high energy electron diffraction (RHEED) and mass spectrometry, a feature unique to MBE. It looks at various modified versions of the basic MBE process, then proceed to describe their application to the growth of so-called 'low-dimensional structures' (LDS) based on ultra-thin heterostructure films with thickness of order a few molecular monolayers. Further chapters cover the growth of a wide range of different compounds and describe their application to fundamental physics and to the fabrication of electronic and opto-electronic devices. The authors study the historical development of all these aspects and emphasise both the (often unexpected) manner of their discovery and development and the unique features which MBE brings to the growth of extremely complex structures with monolayer accuracy.
Book Synopsis Mid-Infrared Coherent Sources and Applications by : Majid Ebrahim-Zadeh
Download or read book Mid-Infrared Coherent Sources and Applications written by Majid Ebrahim-Zadeh and published by Springer Science & Business Media. This book was released on 2008-01-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering fundamental principles and the state of the art, this is a collection of reviews from experts in mid-infrared (mid-IR) coherent sources. Among the sources covered are optical parametric oscillators, difference frequency generators, and the most recent broadband crystalline, quantum cascade, and fiber lasers. The authors show how advances in mid-IR science and technology make these sources indispensable for a variety of applications.
Book Synopsis Physics of Semiconductors and Nanostructures by : Jyoti Prasad Banerjee
Download or read book Physics of Semiconductors and Nanostructures written by Jyoti Prasad Banerjee and published by CRC Press. This book was released on 2019-06-11 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive text on the physics of semiconductors and nanostructures for a large spectrum of students at the final undergraduate level studying physics, material science and electronics engineering. It offers introductory and advanced courses on solid state and semiconductor physics on one hand and the physics of low dimensional semiconductor structures on the other in a single text book. Key Features Presents basic concepts of quantum theory, solid state physics, semiconductors, and quantum nanostructures such as quantum well, quantum wire, quantum dot and superlattice In depth description of semiconductor heterojunctions, lattice strain and modulation doping technique Covers transport in nanostructures under an electric and magnetic field with the topics: quantized conductance, Coulomb blockade, and integer and fractional quantum Hall effect Presents the optical processes in nanostructures under a magnetic field Includes illustrative problems with hints for solutions in each chapter Physics of Semiconductors and Nanostructures will be helpful to students initiating PhD work in the field of semiconductor nanostructures and devices. It follows a unique tutorial approach meeting the requirements of students who find learning the concepts difficult and want to study from a physical perspective.
Book Synopsis Dilute Nitride Semiconductors by : Mohamed Henini
Download or read book Dilute Nitride Semiconductors written by Mohamed Henini and published by Elsevier. This book was released on 2004-12-15 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: - This book contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field. - It gives the reader easier access and better evaluation of future trends, Conveying important results and current ideas. - Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community. The high speed lasers operating at wavelength of 1.3 μm and 1.55 μm are very important light sources in optical communications since the optical fiber used as a transport media of light has dispersion and attenuation minima, respectively, at these wavelengths. These long wavelengths are exclusively made of InP-based material InGaAsP/InP. However, there are several problems with this material system. Therefore, there has been considerable effort for many years to fabricate long wavelength laser structures on other substrates, especially GaAs. The manufacturing costs of GaAs-based components are lower and the processing techniques are well developed. In 1996 a novel quaternary material GaInAsN was proposed which could avoid several problems with the existing technology of long wavelength lasers. In this book, several leaders in the field of dilute nitrides will cover the growth and processing, experimental characterization, theoretical understanding, and device design and fabrication of this recently developed class of semiconductor alloys. They will review their current status of research and development. Dilute Nitrides (III-N-V) Semiconductors: Physics and Technology organises the most current available data, providing a ready source of information on a wide range of topics, making this book essential reading for all post graduate students, researchers and practitioners in the fields of Semiconductors and Optoelectronics - Contains full account of the advances made in the dilute nitrides, providing an excellent starting point for workers entering the field - Gives the reader easier access and better evaluation of future trends, conveying important results and current ideas - Includes a generous list of references at the end of each chapter, providing a useful reference to the III-V-N based semiconductors research community
Book Synopsis Phase Transformations in Materials by : G. Kostorz
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
