Pose Estimation of Uncooperative Spacecraft Using Monocular Vision and Deep Learning

Download Pose Estimation of Uncooperative Spacecraft Using Monocular Vision and Deep Learning PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (111 download)

DOWNLOAD NOW!


Book Synopsis Pose Estimation of Uncooperative Spacecraft Using Monocular Vision and Deep Learning by : Sumant Sharma

Download or read book Pose Estimation of Uncooperative Spacecraft Using Monocular Vision and Deep Learning written by Sumant Sharma and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation addresses the design and validation of new pose estimation algorithms for spaceborne vision-based navigation in close proximity to known uncooperative spacecraft. The onboard estimation of the pose, i.e., relative position and attitude, is a key enabling technology for future on-orbit servicing and debris removal missions. The use of vision-based sensors for pose estimation is particularly attractive due to their low volumetric and power requirements, particularly in comparison to sensors such as LiDAR. Past demonstrations of this technology have relied on various combinations of cooperative use of fiducial markers on the target spacecraft, frequent inputs from the ground control stations, and post-processing of the images on-ground. This research overcomes these limitations by developing novel pose estimation methods that take as input a single two-dimensional image and a simple three-dimensional (3D) wireframe model of the target. These methods estimate the pose without requiring any a-priori pose information or long initialization phases. The first pose estimation method relies on a novel feature detection algorithm based on the filtering of the weak image gradients to identify the edges of the target spacecraft in the image, even in the presence of the Earth in the background. As compared with state-of-the-art feature detection-based methods, this method is shown to be more accurate and computationally faster through experiments on flight imagery. The second pose estimation method leverages modern learning-based algorithms by using a convolutional neural network architecture to classify the pose of the target spacecraft in the image. As compared to the feature detection-based methods, this method is shown to be more robust and two orders of magnitude computationally faster during inference using experiments on synthetic imagery. The third pose estimation method, the Spacecraft Pose Network (SPN), combines the higher accuracy potential of feature detection-based methods with the higher robustness and computational efficiency of learning-based methods. The SPN method achieves this by integrating a convolutional neural network with a Gauss-Newton algorithm. The use of a convolutional neural network allows SPN to implicitly perform feature detection without the need for intensive manual tuning of hyperparameters. The use of a Gauss-Newton algorithm allows the direct application of the underlying physics of the pose estimation problem, i.e., the perspective equations for quantifying the uncertainty in the estimated pose. In contrast to current learning-based methods, the SPN method can be trained using solely synthetic images of a target spacecraft and is shown to generalize its performance on flight imagery of the same target spacecraft. This research also demonstrates that the SPN method can be used for target-in-target pose estimation to handle terminal stages of a docking scenario where only a partial view of the target spacecraft is available. A unique contribution of this research is the generation of the Spacecraft Pose Estimation Dataset (SPEED), which is used to train and evaluate the performance of pose estimation methods. SPEED consists of synthetic images created by fusing OpenGL-based renderings of a spacecraft 3D model with actual meteorological images of the Earth. SPEED also consists of actual camera images created using a seven degrees-of-freedom robotic arm, which positions and orients a vision-based sensor with respect to a full-scale mock-up of a spacecraft. SPEED is being used to host an international competition on pose estimation in collaboration with the European Space Agency. Infinite Orbits is adopting the pose estimation methods developed during this research for onboard deployment during their commercial on-orbit servicing missions.

The Use of Artificial Intelligence for Space Applications

Download The Use of Artificial Intelligence for Space Applications PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3031257553
Total Pages : 444 pages
Book Rating : 4.0/5 (312 download)

DOWNLOAD NOW!


Book Synopsis The Use of Artificial Intelligence for Space Applications by : Cosimo Ieracitano

Download or read book The Use of Artificial Intelligence for Space Applications written by Cosimo Ieracitano and published by Springer Nature. This book was released on 2023-06-16 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an ideal and practical resource on the potential impact Artificial Intelligence (AI) can have in space sciences and applications. AI for Space Application presents a hands-on approach to browse in the subject and to learning how to do. AI is not yet fully accepted as a pervasive technology in space applications because they are often mission-critical and the cost of space equipment and modules raises skepticism on any practical use and reliability. However, it is evident that its potential impact on many aspects is dramatic. Starting from either actual or experimental realizations, the book accompanies the reader through such fascinating subjects like space exploration, autonomous navigation and landing, rover control and guidance on rough surfaces, image analysis automation for planet or star classification, and for space debris avoidance without human intervention. This kind of approach may facilitate further investigations on the same or similar subjects, as the future of space explorations is going toward adopting AI. The intended audience of the book are researchers from academia and space industries and practitioners in related start-ups.

Aerospace Science and Engineering

Download Aerospace Science and Engineering PDF Online Free

Author :
Publisher : Materials Research Forum LLC
ISBN 13 : 1644903180
Total Pages : 209 pages
Book Rating : 4.6/5 (449 download)

DOWNLOAD NOW!


Book Synopsis Aerospace Science and Engineering by : Andrea Alaimo

Download or read book Aerospace Science and Engineering written by Andrea Alaimo and published by Materials Research Forum LLC. This book was released on 2024-07-05 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Aerospace PhD Days are organized by the Italian Association of Aeronautics and Astronautics, AIDAA, and are open to PhD students working on Aerospace Science and Engineering topics. The 2024 proceedings edition has 42 presentations, with authors from more than ten institutions, including delegates from China, Germany, Lithuania, and Switzerland. Many aerospace disciplines and topics were covered, such as fluid dynamics, structures, stratospheric balloons, maintenance and operations, UAV, dynamics and control, space systems, sustainability of aeronautics and space, aeroelasticity, multiphysics, space debris, aeroacoustics, navigation and traffic management, additive manufacturing, and human-machine interaction. Keywords: Luid Dynamics, Structures, Stratospheric Balloons, Maintenance and Operations, UAV, Dynamics and Control, Space Systems, Sustainability of Aeronautics and Space, Aeroelasticity, Multiphysics, Space Debris, Aeroacoustics, Navigation and Traffic Management, Additive Manufacturing, Human-Machine Interaction.

Computer Vision – ECCV 2022 Workshops

Download Computer Vision – ECCV 2022 Workshops PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3031250567
Total Pages : 784 pages
Book Rating : 4.0/5 (312 download)

DOWNLOAD NOW!


Book Synopsis Computer Vision – ECCV 2022 Workshops by : Leonid Karlinsky

Download or read book Computer Vision – ECCV 2022 Workshops written by Leonid Karlinsky and published by Springer Nature. This book was released on 2023-02-14 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8-volume set, comprising the LNCS books 13801 until 13809, constitutes the refereed proceedings of 38 out of the 60 workshops held at the 17th European Conference on Computer Vision, ECCV 2022. The conference took place in Tel Aviv, Israel, during October 23-27, 2022; the workshops were held hybrid or online. The 367 full papers included in this volume set were carefully reviewed and selected for inclusion in the ECCV 2022 workshop proceedings. They were organized in individual parts as follows: Part I: W01 - AI for Space; W02 - Vision for Art; W03 - Adversarial Robustness in the Real World; W04 - Autonomous Vehicle Vision Part II: W05 - Learning With Limited and Imperfect Data; W06 - Advances in Image Manipulation; Part III: W07 - Medical Computer Vision; W08 - Computer Vision for Metaverse; W09 - Self-Supervised Learning: What Is Next?; Part IV: W10 - Self-Supervised Learning for Next-Generation Industry-Level Autonomous Driving; W11 - ISIC Skin Image Analysis; W12 - Cross-Modal Human-Robot Interaction; W13 - Text in Everything; W14 - BioImage Computing; W15 - Visual Object-Oriented Learning Meets Interaction: Discovery, Representations, and Applications; W16 - AI for Creative Video Editing and Understanding; W17 - Visual Inductive Priors for Data-Efficient Deep Learning; W18 - Mobile Intelligent Photography and Imaging; Part V: W19 - People Analysis: From Face, Body and Fashion to 3D Virtual Avatars; W20 - Safe Artificial Intelligence for Automated Driving; W21 - Real-World Surveillance: Applications and Challenges; W22 - Affective Behavior Analysis In-the-Wild; Part VI: W23 - Visual Perception for Navigation in Human Environments: The JackRabbot Human Body Pose Dataset and Benchmark; W24 - Distributed Smart Cameras; W25 - Causality in Vision; W26 - In-Vehicle Sensing and Monitorization; W27 - Assistive Computer Vision and Robotics; W28 - Computational Aspects of Deep Learning; Part VII: W29 - Computer Vision for Civil and Infrastructure Engineering; W30 - AI-Enabled Medical Image Analysis: Digital Pathology and Radiology/COVID19; W31 - Compositional and Multimodal Perception; Part VIII: W32 - Uncertainty Quantification for Computer Vision; W33 - Recovering 6D Object Pose; W34 - Drawings and Abstract Imagery: Representation and Analysis; W35 - Sign Language Understanding; W36 - A Challenge for Out-of-Distribution Generalization in Computer Vision; W37 - Vision With Biased or Scarce Data; W38 - Visual Object Tracking Challenge.

Proceedings of the IUTAM Symposium on Optimal Guidance and Control for Autonomous Systems 2023

Download Proceedings of the IUTAM Symposium on Optimal Guidance and Control for Autonomous Systems 2023 PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3031393031
Total Pages : 403 pages
Book Rating : 4.0/5 (313 download)

DOWNLOAD NOW!


Book Synopsis Proceedings of the IUTAM Symposium on Optimal Guidance and Control for Autonomous Systems 2023 by : Dilmurat Azimov

Download or read book Proceedings of the IUTAM Symposium on Optimal Guidance and Control for Autonomous Systems 2023 written by Dilmurat Azimov and published by Springer Nature. This book was released on 2024-01-05 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases a collection of papers that present cutting-edge studies, methods, experiments, and applications in various interdisciplinary fields. These fields encompass optimal control, guidance, navigation, game theory, stability, nonlinear dynamics, robotics, sensor fusion, machine learning, and autonomy. The chapters reveal novel studies and methods, providing fresh insights into the field of optimal guidance and control for autonomous systems. The book also covers a wide range of relevant applications, showcasing how optimal guidance and control techniques can be effectively applied in various domains, including mechanical and aerospace engineering. From robotics to sensor fusion and machine learning, the papers explore the practical implications of these techniques and methodologies.

Disruptive Technologies for Big Data and Cloud Applications

Download Disruptive Technologies for Big Data and Cloud Applications PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 9811921776
Total Pages : 880 pages
Book Rating : 4.8/5 (119 download)

DOWNLOAD NOW!


Book Synopsis Disruptive Technologies for Big Data and Cloud Applications by : J. Dinesh Peter

Download or read book Disruptive Technologies for Big Data and Cloud Applications written by J. Dinesh Peter and published by Springer Nature. This book was released on 2022-08-01 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a written record of the synergy that already exists among the research communities and represents a solid framework in the advancement of big data and cloud computing disciplines from which new interaction will result in the future. This book is a compendium of the International Conference on Big Data and Cloud Computing (ICBDCC 2021). It includes recent advances in big data analytics, cloud computing, the Internet of nano things, cloud security, data analytics in the cloud, smart cities and grids, etc. This book primarily focuses on the application of knowledge that promotes ideas for solving the problems of society through cutting-edge technologies. The articles featured in this book provide novel ideas that contribute to the growth of world-class research and development. The contents of this book are of interest to researchers and professionals alike.

Modern Spacecraft Guidance, Navigation, and Control

Download Modern Spacecraft Guidance, Navigation, and Control PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 0323909175
Total Pages : 1074 pages
Book Rating : 4.3/5 (239 download)

DOWNLOAD NOW!


Book Synopsis Modern Spacecraft Guidance, Navigation, and Control by : Vincenzo Pesce

Download or read book Modern Spacecraft Guidance, Navigation, and Control written by Vincenzo Pesce and published by Elsevier. This book was released on 2022-11-13 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Spacecraft Guidance, Navigation, and Control: From System Modeling to AI and Innovative Applications provides a comprehensive foundation of theory and applications of spacecraft GNC, from fundamentals to advanced concepts, including modern AI-based architectures with focus on hardware and software practical applications. Divided into four parts, this book begins with an introduction to spacecraft GNC, before discussing the basic tools for GNC applications. These include an overview of the main reference systems and planetary models, a description of the space environment, an introduction to orbital and attitude dynamics, and a survey on spacecraft sensors and actuators, with details of their modeling principles. Part 2 covers guidance, navigation, and control, including both on-board and ground-based methods. It also discusses classical and novel control techniques, failure detection isolation and recovery (FDIR) methodologies, GNC verification, validation, and on-board implementation. The final part 3 discusses AI and modern applications featuring different applicative scenarios, with particular attention on artificial intelligence and the possible benefits when applied to spacecraft GNC. In this part, GNC for small satellites and CubeSats is also discussed. Modern Spacecraft Guidance, Navigation, and Control: From System Modeling to AI and Innovative Applications is a valuable resource for aerospace engineers, GNC/AOCS engineers, avionic developers, and AIV/AIT technicians. - Provides an overview of classical and modern GNC techniques, covering practical system modeling aspects and applicative cases - Presents the most important artificial intelligence algorithms applied to present and future spacecraft GNC - Describes classical and advanced techniques for GNC hardware and software verification and validation and GNC failure detection isolation and recovery (FDIR)

Next Generation CubeSats and SmallSats

Download Next Generation CubeSats and SmallSats PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 0128245425
Total Pages : 838 pages
Book Rating : 4.1/5 (282 download)

DOWNLOAD NOW!


Book Synopsis Next Generation CubeSats and SmallSats by : Francesco Branz

Download or read book Next Generation CubeSats and SmallSats written by Francesco Branz and published by Elsevier. This book was released on 2023-08-24 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next Generation of CubeSats and SmallSats: Enabling Technologies, Missions, and Markets provides a comprehensive understanding of the small and medium sized satellite approach and its potentialities and limitations. The book analyzes promising applications (e.g., constellations and distributed systems, small science platforms that overachieve relative to their development time and cost) as paradigm-shifting solutions for space exploitation, with an analysis of market statistics and trends and a prediction of where the technologies, and consequently, the field is heading in the next decade. The book also provides a thorough analysis of CubeSat potentialities and applications, and addresses unique technical approaches and systems strategies. Throughout key sections (introduction and background, technology details, systems, applications, and future prospects), the book provides basic design tools scaled to the small satellite problem, assesses the technological state-of-the-art, and describes the most recent advancements with a look to the near future. This new book is for aerospace engineering professionals, advanced students, and designers seeking a broad view of the CubeSat world with a brief historical background, strategies, applications, mission scenarios, new challenges and upcoming advances. - Presents a comprehensive and systematic view of the technologies and space missions related to nanosats and smallsats - Discusses next generation technologies, up-coming advancements and future perspectives - Features the most relevant CubeSat launch initiatives from NASA, ESA, and from developing countries, along with an overview of the New Space CubeSat market

Automated Rendezvous and Docking of Spacecraft

Download Automated Rendezvous and Docking of Spacecraft PDF Online Free

Author :
Publisher : Cambridge University Press
ISBN 13 : 1139440683
Total Pages : 517 pages
Book Rating : 4.1/5 (394 download)

DOWNLOAD NOW!


Book Synopsis Automated Rendezvous and Docking of Spacecraft by : Wigbert Fehse

Download or read book Automated Rendezvous and Docking of Spacecraft written by Wigbert Fehse and published by Cambridge University Press. This book was released on 2003-11-13 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference for space engineers on rendezvous and docking/berthing (RVD/B) related issues, this book answers key questions such as: How does the docking vehicle accurately approach the target spacecraft? What technology is needed aboard the spacecraft to perform automatic rendezvous and docking, and what systems are required by ground control to supervise this process? How can the proper functioning of all rendezvous-related equipment, systems and operations be verified before launch? The book provides an overview of the major issues governing approach and mating strategies, and system concepts for rendezvous and docking/berthing. These issues are described and explained such that aerospace engineers, students and even newcomers to the field can acquire a basic understanding of RVD/B. The author would like to extend his thanks to Dr Shufan Wu, GNC specialist and translator of the book's Chinese edition, for his help in the compilation of these important errata.

Monocular Model-based 3D Tracking of Rigid Objects

Download Monocular Model-based 3D Tracking of Rigid Objects PDF Online Free

Author :
Publisher : Now Publishers Inc
ISBN 13 : 9781933019031
Total Pages : 108 pages
Book Rating : 4.0/5 (19 download)

DOWNLOAD NOW!


Book Synopsis Monocular Model-based 3D Tracking of Rigid Objects by : Vincent Lepetit

Download or read book Monocular Model-based 3D Tracking of Rigid Objects written by Vincent Lepetit and published by Now Publishers Inc. This book was released on 2005 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monocular Model-Based 3D Tracking of Rigid Objects reviews the different techniques and approaches that have been developed by industry and research.

Intelligent Systems Design and Applications

Download Intelligent Systems Design and Applications PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3031647769
Total Pages : 510 pages
Book Rating : 4.0/5 (316 download)

DOWNLOAD NOW!


Book Synopsis Intelligent Systems Design and Applications by : Ajith Abraham

Download or read book Intelligent Systems Design and Applications written by Ajith Abraham and published by Springer Nature. This book was released on with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:

HCI International 2020 - Posters

Download HCI International 2020 - Posters PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3030507262
Total Pages : 739 pages
Book Rating : 4.0/5 (35 download)

DOWNLOAD NOW!


Book Synopsis HCI International 2020 - Posters by : Constantine Stephanidis

Download or read book HCI International 2020 - Posters written by Constantine Stephanidis and published by Springer Nature. This book was released on 2020-07-11 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set CCIS 1224, CCIS 1225, and CCIS 1226 contains the extended abstracts of the posters presented during the 22nd International Conference on Human-Computer Interaction, HCII 2020, which took place in Copenhagen, Denmark, in July 2020.* HCII 2020 received a total of 6326 submissions, of which 1439 papers and 238 posters were accepted for publication in the pre-conference proceedings after a careful reviewing process. The 238 papers presented in these three volumes are organized in topical sections as follows: Part I: design and evaluation methods and tools; user characteristics, requirements and preferences; multimodal and natural interaction; recognizing human psychological states; user experience studies; human perception and cognition. -AI in HCI. Part II: virtual, augmented and mixed reality; virtual humans and motion modelling and tracking; learning technology. Part III: universal access, accessibility and design for the elderly; smartphones, social media and human behavior; interacting with cultural heritage; human-vehicle interaction; transport, safety and crisis management; security, privacy and trust; product and service design. *The conference was held virtually due to the COVID-19 pandemic.

Realistic Ray Tracing, Second Edition

Download Realistic Ray Tracing, Second Edition PDF Online Free

Author :
Publisher : A K Peters, Ltd.
ISBN 13 : 1568814615
Total Pages : 242 pages
Book Rating : 4.5/5 (688 download)

DOWNLOAD NOW!


Book Synopsis Realistic Ray Tracing, Second Edition by : Peter Shirley

Download or read book Realistic Ray Tracing, Second Edition written by Peter Shirley and published by A K Peters, Ltd.. This book was released on 2008-12-19 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating on the "nuts and bolts" of writing ray tracing programs, this new and revised edition emphasizes practical and implementation issues and takes the reader through all the details needed to write a modern rendering system. Most importantly, the book adds many C++ code segments, and adds new details to provide the reader with a better intuitive understanding of ray tracing algorithms.

Passivity-Based Control and Estimation in Networked Robotics

Download Passivity-Based Control and Estimation in Networked Robotics PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3319151711
Total Pages : 349 pages
Book Rating : 4.3/5 (191 download)

DOWNLOAD NOW!


Book Synopsis Passivity-Based Control and Estimation in Networked Robotics by : Takeshi Hatanaka

Download or read book Passivity-Based Control and Estimation in Networked Robotics written by Takeshi Hatanaka and published by Springer. This book was released on 2015-04-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the control of networked robotic systems, this book synthesizes a unified passivity-based approach to an emerging cross-disciplinary subject. Thanks to this unified approach, readers can access various state-of-the-art research fields by studying only the background foundations associated with passivity. In addition to the theoretical results and techniques, the authors provide experimental case studies on testbeds of robotic systems including networked haptic devices, visual robotic systems, robotic network systems and visual sensor network systems. The text begins with an introduction to passivity and passivity-based control together with the other foundations needed in this book. The main body of the book consists of three parts. The first examines how passivity can be utilized for bilateral teleoperation and demonstrates the inherent robustness of the passivity-based controller against communication delays. The second part emphasizes passivity’s usefulness for visual feedback control and estimation. Convergence is rigorously proved even when other passive components are interconnected. The passivity approach is also differentiated from other methodologies. The third part presents the unified passivity-based control-design methodology for multi-agent systems. This scheme is shown to be either immediately applicable or easily extendable to the solution of various motion coordination problems including 3-D attitude/pose synchronization, flocking control and cooperative motion estimation. Academic researchers and practitioners working in systems and control and/or robotics will appreciate the potential of the elegant and novel approach to the control of networked robots presented here. The limited background required and the case-study work described also make the text appropriate for and, it is hoped, inspiring to students.

3D Imaging, Analysis and Applications

Download 3D Imaging, Analysis and Applications PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 144714063X
Total Pages : 506 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!


Book Synopsis 3D Imaging, Analysis and Applications by : Nick Pears

Download or read book 3D Imaging, Analysis and Applications written by Nick Pears and published by Springer Science & Business Media. This book was released on 2012-05-22 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Imaging, Analysis and Applications brings together core topics, both in terms of well-established fundamental techniques and the most promising recent techniques in the exciting field of 3D imaging and analysis. Many similar techniques are being used in a variety of subject areas and applications and the authors attempt to unify a range of related ideas. With contributions from high profile researchers and practitioners, the material presented is informative and authoritative and represents mainstream work and opinions within the community. Composed of three sections, the first examines 3D imaging and shape representation, the second, 3D shape analysis and processing, and the last section covers 3D imaging applications. Although 3D Imaging, Analysis and Applications is primarily a graduate text, aimed at masters-level and doctoral-level research students, much material is accessible to final-year undergraduate students. It will also serve as a reference text for professional academics, people working in commercial research and development labs and industrial practitioners.

Monocular Pose Estimation and Shape Reconstruction of Quasi-articulated Objects with Consumer Depth Camera

Download Monocular Pose Estimation and Shape Reconstruction of Quasi-articulated Objects with Consumer Depth Camera PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 152 pages
Book Rating : 4.:/5 (899 download)

DOWNLOAD NOW!


Book Synopsis Monocular Pose Estimation and Shape Reconstruction of Quasi-articulated Objects with Consumer Depth Camera by : Mao Ye

Download or read book Monocular Pose Estimation and Shape Reconstruction of Quasi-articulated Objects with Consumer Depth Camera written by Mao Ye and published by . This book was released on 2014 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Space Robotics: Dynamics and Control

Download Space Robotics: Dynamics and Control PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 1461535883
Total Pages : 291 pages
Book Rating : 4.4/5 (615 download)

DOWNLOAD NOW!


Book Synopsis Space Robotics: Dynamics and Control by : Yangsheng Xu

Download or read book Space Robotics: Dynamics and Control written by Yangsheng Xu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic technology offers two potential benefits for future space exploration. One benefit is minimizing the risk that astronauts face. The other benefit is increasing their productivity. Realizing the benefits of robotic technology in space will require solving several problems which are unique and now becoming active research topics. One of the most important research areas is dynamics, control, motion and planning for space robots by considering the dynamic interaction between the robot and the base (space station, space shuttle, or satellite). Any inefficiency in the planning and control can considerably risk by success of the space mission. Space Robotics: Dynamics and Control presents a collection of papers concerning fundamental problems in dynamics and control of space robots, focussing on issues relevant to dynamic base/robot interaction. The authors are all pioneers in theoretical analysis and experimental systems development of space robot technology. The chapters are organized within three problem areas: dynamics problems, nonholonomic nature problems, and control problems. This collection provides a solid reference for researchers in robotics, mechanics, control, and astronautical science.