Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Plasma Diagnostics With Semiconductor Lasers Using Fluorescence And Absorption Spectroscopy
Download Plasma Diagnostics With Semiconductor Lasers Using Fluorescence And Absorption Spectroscopy full books in PDF, epub, and Kindle. Read online Plasma Diagnostics With Semiconductor Lasers Using Fluorescence And Absorption Spectroscopy ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Plasma Diagnostics with Semiconductor Lasers Using Fluorescence and Absorption Spectroscopy by : Douglas Steven Baer
Download or read book Plasma Diagnostics with Semiconductor Lasers Using Fluorescence and Absorption Spectroscopy written by Douglas Steven Baer and published by . This book was released on 1993 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Atomic Emission, Absorption and Fluorescence in the Laser-induced Plasma by :
Download or read book Atomic Emission, Absorption and Fluorescence in the Laser-induced Plasma written by and published by . This book was released on 2009 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main result of our efforts is the development and successful application of the theoretical model of laser induced plasma (LIP) that allows a back-calculation of the composition of the plasma (and the condensed phase) based on the observable plasma spectrum. The model has an immediate experimental input in the form of LIP spectra and a few other experimentally determined parameters. The model is also sufficiently simple and, therefore, practical. It is conveniently interfaced in a graphical user-friendly form for using by students and any laboratory personnel with only minimal training. In our view, the model opens up the possibility for absolute analysis, i.e. the analysis which requires no standards and tedious calibration. The other parts of this proposal (including plasma diagnostics) were somewhat subordinate to this main goal. Plasma diagnostics provided the model with the necessary experimental input and led to better understanding of plasma processes. Another fruitful direction we pursued was the use of the correlation analysis for material identification and plasma diagnostics. Through a number of computer simulations we achieved a clear understanding of how, where and why this approach works being applied to emission spectra from a laser plasma. This understanding will certainly improve the quality of forensic and industrial analyses where fast and reliable material identification and sorting are required.
Book Synopsis Plasma Diagnostics by : Orlando Auciello
Download or read book Plasma Diagnostics written by Orlando Auciello and published by Academic Press. This book was released on 2013-10-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Diagnostics, Volume 1: Discharge Parameters and Chemistry covers seven chapters on the important diagnostic techniques for plasmas and details their use in particular applications. The book discusses optical diagnostic techniques for low pressure plasmas and plasma processing; plasma diagnostics for electrical discharge light sources; as well as Langmuir probes. The text also describes the mass spectroscopy of plasmas, microwave diagnostics, paramagnetic resonance diagnostics, and diagnostics in thermal plasma processing. Electrical engineers, nuclear engineers, microwave engineers, chemists, and technical personnel in universities, industry, and national laboratories will find the book invaluable.
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Plasma Processing of Semiconductors by : P.F. Williams
Download or read book Plasma Processing of Semiconductors written by P.F. Williams and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Processing of Semiconductors contains 28 contributions from 18 experts and covers plasma etching, plasma deposition, plasma-surface interactions, numerical modelling, plasma diagnostics, less conventional processing applications of plasmas, and industrial applications. Audience: Coverage ranges from introductory to state of the art, thus the book is suitable for graduate-level students seeking an introduction to the field as well as established workers wishing to broaden or update their knowledge.
Book Synopsis The Development of Diode Laser Infrared Absorption Spectroscopy as a Plasma Diagnostic by : Robert Leslie McClain
Download or read book The Development of Diode Laser Infrared Absorption Spectroscopy as a Plasma Diagnostic written by Robert Leslie McClain and published by . This book was released on 1991 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Plasma Diagnostics and Spectroscopy Using Tuneable IR Diode Lasers by : W. Y. Fan
Download or read book Plasma Diagnostics and Spectroscopy Using Tuneable IR Diode Lasers written by W. Y. Fan and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Plasma Spectroscopy by : Evgeniĭ Aleksandrovich Oks
Download or read book Plasma Spectroscopy written by Evgeniĭ Aleksandrovich Oks and published by Springer. This book was released on 1995 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Spectroscopy develops the foundation of spectroscopy for plasmas containing quasi-monochromatic electric fields in the microwaves or optical range. This topic is of major importance for plasma spectroscopy and the diagnostic of technological microwave and radiofrequency discharges, plasma lasers of microwave, optical, and x-ray ranges, pulsed discharges employed as advanced radiation sources, magnetic and laser fusion, and ionospheric and astrophysical plasmas. This monograph presents novel nonlinear-optical methods for theoretical analysis of radiation of quantum systems in media, describes principles for measuring the field and plasma parameters, and discusses their practical applications.
Download or read book 92-2960 - 92-2994 written by and published by . This book was released on 1992 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Laser-Aided Diagnostics of Plasmas and Gases by : K Muraoka
Download or read book Laser-Aided Diagnostics of Plasmas and Gases written by K Muraoka and published by CRC Press. This book was released on 2016-04-19 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and expanded from the original Japanese edition, Laser-Aided Diagnostics of Gases and Plasmas takes a unique approach in treating laser-aided diagnostics. The book unifies the subject by joining applications instead of describing each application as a totally separate system. In taking this approach, it highlights the relative strengths of
Book Synopsis Tracer-based Planar Laser-induced Fluorescence Diagnostics by : Brian Ho-yin Cheung
Download or read book Tracer-based Planar Laser-induced Fluorescence Diagnostics written by Brian Ho-yin Cheung and published by Stanford University. This book was released on 2011 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two advances to tracer-based planar laser-induced fluorescence (PLIF) diagnostics are presented in this work. The first improvement is the development of a 3-pentanone fluorescence quantum yield (FQY) database and model for a wide range of conditions in support of quantitative PLIF diagnostics. In addition, this work presents a sensitive, time-resolved tracer-based PLIF diagnostic, accomplished by using a continuous-wave (CW) laser with the high-FQY tracer toluene. Because of its ease of use and desirable photophysical properties, PLIF diagnostics using 3-pentanone as a tracer are common, particularly for internal combustion engine (ICE) diagnostics. Thus, there is a need for 3-pentanone FQY measurements and modeling over a wide range of temperatures, pressures, and excitation wavelengths. For insight into the collisionless process in the FQY model, measurements were made in 3-pentanone vapor at low-pressures across a range of temperatures using a flowing cell. Laser excitation with 248, 266, 277, 308 nm wavelengths were utilized, and Rayleigh scattering of the laser beam was used to calibrate the optical efficiency of the collection optics and detector. This low-pressure data allows calculation of the 3-pentanone fluorescence rate and non-radiative de-excitation rate in the fluorescence model. The vibrational relaxation cascade parameter for 3-pentanone collisions was also determined. Measurements of 3-pentanone FQY were also made over a range of temperatures and pressures relevant to diagnostic applications, and, in particular, combined high-temperature and high-pressure conditions applicable to internal combustion engines (ICE). These data were collected in a custom-built optical cell capable of simultaneous high-pressure and high-temperature conditions. The behavior of the FQY in nitrogen for temperatures up to 745 K and in air up to 570 K was examined for pressures from 1 to 25 bar. These data were used to further optimize the parameters in the FQY model representing collisional processes. The large quantity of data with 308 nm excitation allowed optimization of the nitrogen quenching rate, and data in air were used to optimize the oxygen quenching rate. These data were also used to optimize the vibrational relaxation parameters for nitrogen and oxygen. The model with the updated parameters is consistent with the data collected in the current work, as well as with fluorescence measurements made in optical ICEs up to 1100 K and 28 bar. Another area of tracer-based PLIF diagnostics development is time-resolved imaging. Because PLIF diagnostics are often performed using pulsed lasers, the time resolution of measurements is limited to the pulse rate of laser. Use of a high-powered visible laser with an off-the-shelf cavity frequency doubler is shown to produce a moderate-power CW beam in the ultraviolet wavelength regime. Application of this CW source to excite toluene, a high-FQY tracer, yields a sensitive, time-resolved tracer-based PLIF diagnostic. Fluctuation detection limits for tracer mole fraction were investigated by applying the diagnostic to an atmospheric temperature and pressure nitrogen jet seeded with 4% toluene, and detection limits of better than 1% of the maximum toluene mole fraction were achieved for detection of fluorescence signal at a point, along a line, and over a plane. The diagnostic was also demonstrated on a turbulent jet for line and planar detection and demonstrated the potential for toluene time-resolved PLIF diagnostics with CW lasers.
Book Synopsis Spectroscopic Diagnostics to Support Advanced Microelectronic Fabrication Techniques by : J. C. Wormhoudt
Download or read book Spectroscopic Diagnostics to Support Advanced Microelectronic Fabrication Techniques written by J. C. Wormhoudt and published by . This book was released on 1985 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first annual report on a program to develop laser spectroscopic diagnostics for detection of gas phase species important in fabrication processes for advanced semiconductor materials. It has two objectives, to obtain quantitative spectroscopic data for these molecules, and to apply diagnostics to model fabrication systems. This report summarizes progress in the areas of investigation identified in the first year: chlorine atom detection using an infrared tunable diode laser, which will also be used to instrument a plasma etching reactor, and infrared and laser induced fluorescence spectroscopic studies of SiF2, CF2, and SiH2. Keywords include: Diagnostic Instrumentation, Electronic Materials, Infrared Absorption, Lasers, Laser-Induced Fluorescence, Microelectronic Fabrication, Semiconductor Processing, and Spectroscopy.
Book Synopsis Laser Spectroscopy for Sensing by : Matthieu Baudelet
Download or read book Laser Spectroscopy for Sensing written by Matthieu Baudelet and published by Elsevier. This book was released on 2014-02-15 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser spectroscopy is a valuable tool for sensing and chemical analysis. Developments in lasers, detectors and mathematical analytical tools have led to improvements in the sensitivity and selectivity of spectroscopic techniques and extended their fields of application. Laser Spectroscopy for Sensing examines these advances and how laser spectroscopy can be used in a diverse range of industrial, medical, and environmental applications. Part one reviews basic concepts of atomic and molecular processes and presents the fundamentals of laser technology for controlling the spectral and temporal aspects of laser excitation. In addition, it explains the selectivity, sensitivity, and stability of the measurements, the construction of databases, and the automation of data analysis by machine learning. Part two explores laser spectroscopy techniques, including cavity-based absorption spectroscopy and the use of photo-acoustic spectroscopy to acquire absorption spectra of gases and condensed media. These chapters discuss imaging methods using laser-induced fluorescence and phosphorescence spectroscopies before focusing on light detection and ranging, photothermal spectroscopy and terahertz spectroscopy. Part three covers a variety of applications of these techniques, particularly the detection of chemical, biological, and explosive threats, as well as their use in medicine and forensic science. Finally, the book examines spectroscopic analysis of industrial materials and their applications in nuclear research and industry. The text provides readers with a broad overview of the techniques and applications of laser spectroscopy for sensing. It is of great interest to laser scientists and engineers, as well as professionals using lasers for medical applications, environmental applications, military applications, and material processing. Presents the fundamentals of laser technology for controlling the spectral and temporal aspects of laser excitation Explores laser spectroscopy techniques, including cavity-based absorption spectroscopy and the use of photo-acoustic spectroscopy to acquire absorption spectra of gases and condensed media Considers spectroscopic analysis of industrial materials and their applications in nuclear research and industry
Book Synopsis Laser Diagnostics of Reacting Molecular Plasmas for Plasma Assisted Combustion Applications by : Caroline Winters
Download or read book Laser Diagnostics of Reacting Molecular Plasmas for Plasma Assisted Combustion Applications written by Caroline Winters and published by . This book was released on 2017 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has produced extensive sets of new data on low-temperature plasma-assisted fuel oxidation in hydrogen-oxygen-argon and hydrocarbon-oxygen-argon mixtures. The measurements have been made in two different plasma flow reactors, at an initial temperature of 500 K and pressures ranging from 300 Torr to 700 Torr. In both reactors, the plasma is generated by a high peak voltage, ns pulse discharge, operated at high pulse repetition rates (up to 20 kHz). Metastable Ar atom number density distributions in the discharge afterglow are measured by Tunable Diode Laser Absorption Spectroscopy (TDLAS), and used to characterize plasma uniformity. Temperature in the discharge-excited reacting flow is measured by Rayleigh scattering. Two-photon Absorption Laser Induced Fluorescence (TALIF) is used to measured absolute H and O atom number densities. The results are compared with predictions of a kinetic model analyzing reaction kinetics of excited species and radicals generated by the plasma at low temperatures and high pressures. The modeling predictions show good agreement with the data, with the exception of fuel-limited mixtures, when nearly all fuel available in the mixture of reactants is oxidized in the discharge. Kinetic modeling analysis identified dominant processes of generation and decay of atomic and radical species in the discharge and in the afterglow. At the present low-temperature conditions, the effect of chain branching reactions on plasma-assisted fuel oxidation kinetics is insignificant.
Book Synopsis Film Deposition by Plasma Techniques by : Mitsuharu Konuma
Download or read book Film Deposition by Plasma Techniques written by Mitsuharu Konuma and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of thin films depend strongly upon the deposition technique and conditions chosen. In order to achieve the desired film, optimum deposition conditions have to be found by carrying out experiments in a trial-and error fashion with varying parameters. The data obtained on one growth apparatus are often not transferable to another. This is especially true for film deposition processes using a cold plasma because of our poor under standing of the mechanisms. Relatively precise studies have been carried out on the role that physical effects play in film formation such as sputter deposition. However, there are many open questions regarding processes that involve chemical reactions, for example, reactive sputter deposition or plasma enhanced chemical vapor deposition. Much further research is re quired in order to understand the fundamental deposition processes. A sys tematic collection of basic data, some of which may be readily available in other branches of science, for example, reaction cross sections for gases with energetic electrons, is also required. The need for pfasma deposition techniques is felt strongly in industrial applications because these techniques are superior to traditional thin-film deposition techniques in many ways. In fact, plasma deposition techniques have developed rapidly in the semiconductor and electronics industries. Fields of possible application are still expanding. A reliable plasma reactor with an adequate in situ system for monitoring the deposition conditions and film properties must be developed to improve reproducibility and pro ductivity at the industrial level.
Book Synopsis Plasma Diagnostics by : Orlando Auciello
Download or read book Plasma Diagnostics written by Orlando Auciello and published by Academic Press. This book was released on 2013-10-22 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasmas and their interaction with materials have become subjects of major interest because of their importance in modern forefront technologies such as microelectronics, fusion energy, and space. Plasmas are used in microelectronics to process semiconductors (etching of patterns for microcircuits, plasma-induced deposition of thin films, etc.); plasmas produce deleterious erosion effects on surfaces of materials used for fusion devices and spaceships exposed to the low earth environment.Diagnostics of plasmas and materials exposed to them are fundamental to the understanding of the physical and chemical phenomena involved. Plasma Diagnostics provides a comprehensive treatment of the subject.short version, TJE_Plasmas and their interaction with materials have become subjects of major interest because of their importance in modern forefront technologies such as microelectronics, fusion energy, and space. Diagnostics of plasmas and materials exposed to them are fundamental to the understanding of the physical and chemical phenomena involved. Plasma Diagnostics provides a comprehensive treatment of the subject.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-03 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
