Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Particulate Matter Emissions From A Direct Injection Spark Ignition Engine Under Cold Fast Idle Conditions For Ethanol Gasoline Blends
Download Particulate Matter Emissions From A Direct Injection Spark Ignition Engine Under Cold Fast Idle Conditions For Ethanol Gasoline Blends full books in PDF, epub, and Kindle. Read online Particulate Matter Emissions From A Direct Injection Spark Ignition Engine Under Cold Fast Idle Conditions For Ethanol Gasoline Blends ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Particulate Matter Emissions from a Direct Injection Spark Ignition Engine Under Cold Fast Idle Conditions for Ethanol-Gasoline Blends by : Iason Dimou
Download or read book Particulate Matter Emissions from a Direct Injection Spark Ignition Engine Under Cold Fast Idle Conditions for Ethanol-Gasoline Blends written by Iason Dimou and published by . This book was released on 2011 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Particulate Matter Emissions from a Direct Injection Spark Ignition Engine Under Cold-fast-idle Conditions for Ethanol-gasoline Blends by : Iason Dimou
Download or read book Particulate Matter Emissions from a Direct Injection Spark Ignition Engine Under Cold-fast-idle Conditions for Ethanol-gasoline Blends written by Iason Dimou and published by . This book was released on 2011 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an effort to build internal combustion engines with both reduced brake-specific fuel consumption and better emission control, engineers developed the Direct Injection Spark Ignition (DISI) engine. DISI engines combine the specific higher output of the spark ignition engine, with the better efficiency of the compression ignition engine at part load. Despite their benefits, DISI engines still suffer from high hydrocarbon, NO2 and particulate matter (PM) emissions. Until recently, PM emissions have received relatively little attention, despite their severe effects on human health, related mostly to their size. Previous research indicates that almost 80% of the PM is emitted during the first few minutes of the engine's operation (cold-start-fast-idling period). A proposed solution for PM emission reduction is the use of fuel blends with ethanol. The present research experimentally measures the effect of ethanol content in fuel on PM formation in the combustion chamber of a DISI engine during the cold-start period. A novel sampling system has been designed and combined with a Scanning Mobility Particle Sizer (SMPS) system, in order to measure the particulate matter number (PN) concentration 15 cm downstream from the exhaust valves of a DISI engine, for a temperature range between 0 and 40"C, under low load operation. Seven gasohol fuels have been tested with the ethanol content varying from 0% (EO) up to 85% (E85). For E10 to E85, PN modestly increases when the engine coolant temperature (ECT) is lowered. The PN distributions, however, are insensitive to the ethanol content of the fuel. The total PN for EQ is substantially higher than for the gasohol fuels, at ECT below 20'C. However, for ECT higher than 20'C, the total PN values (obtained from integrating the PN distribution from 15 to 350 nm) are approximately the same for all fuels. This sharp change in PN from EQ to E10 is confirmed by running the tests with E2.5 and E5; the midpoint of the transition occurs at approximately E5. Because the fuels' evaporating properties do not change substantially from EQ to E10, the significant change in PN is attributed to the particulate matter formation chemistry.
Book Synopsis Internal Combustion Engines by : Institution of Mechanical Engineers
Download or read book Internal Combustion Engines written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2011-11-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers of the Internal Combustion Engines: Performance fuel economy and emissions conference, in the IMechE bi-annual series, held on the 29th and 30th November 2011. The internal combustion engine is produced in tens of millions per year for applications as the power unit of choice in transport and other sectors. It continues to meet both needs and challenges through improvements and innovations in technology and advances from the latest research. These papers set out to meet the challenges of internal combustion engines, which are greater than ever. How can engineers reduce both CO2 emissions and the dependence on oil-derivate fossil fuels? How will they meet the future, more stringent constraints on gaseous and particulate material emissions as set by EU, North American and Japanese regulations? How will technology developments enhance performance and shape the next generation of designs? This conference looks closely at developments for personal transport applications, though many of the drivers of change apply to light and heavy duty, on and off highway, transport and other sectors. Aimed at anyone with interests in the internal combustion engine and its challenges The papers consider key questions relating to the internal combustion engine
Book Synopsis Ethanol Blend Effects On Direct Injection Spark-Ignition Gasoline Vehicle Particulate Matter Emissions by : John M. Storey
Download or read book Ethanol Blend Effects On Direct Injection Spark-Ignition Gasoline Vehicle Particulate Matter Emissions written by John M. Storey and published by . This book was released on 2010 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis In-Cylinder Particulate Matter and Spray Imaging of Ethanol/Gasoline Blends in a Direct Injection Spark Ignition Engine by : Mohammad Fatouraie
Download or read book In-Cylinder Particulate Matter and Spray Imaging of Ethanol/Gasoline Blends in a Direct Injection Spark Ignition Engine written by Mohammad Fatouraie and published by . This book was released on 2013 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Reducing Particulate Emissions in Gasoline Engines by : Thorsten Boger
Download or read book Reducing Particulate Emissions in Gasoline Engines written by Thorsten Boger and published by SAE International. This book was released on 2018-11-28 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: For years, diesel engines have been the focus of particulate matter emission reductions. Now, however, modern diesel engines emit less particles than a comparable gasoline engine. This transformation necessitates an introduction of particulate reduction strategies for the gasoline-powered vehicle. Many strategies can be leveraged from diesel engines, but new combustion and engine control technologies will be needed to meet the latest gasoline regulations across the globe. Particulate reduction is a critical health concern in addition to the regulatory requirements. This is a vital issue with real-world implications. Reducing Particulate Emissions in Gasoline Engines encompasses the current strategies and technologies used to reduce particulates to meet regulatory requirements and curtail health hazards - reviewing principles and applications of these techniques. Highlights and features in the book include: Gasoline particulate filter design, function and applications Coated and uncoated three way catalyst design and integration Measurement of gasoline particulate matter emission, both laboratory and PEMS The goal is to provide a comprehensive assessment of gasoline particulate emission control to meet regulatory and health requirements - appealing to calibration, development and testing engineers alike.
Book Synopsis Ethanol Blend Effects On Direct Injection Spark-Ignition Gasoline Vehicle Particulate Matter Emissions by :
Download or read book Ethanol Blend Effects On Direct Injection Spark-Ignition Gasoline Vehicle Particulate Matter Emissions written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct injection spark-ignition (DISI) gasoline engines can offer better fuel economy and higher performance over their port fuel-injected counterparts, and are now appearing increasingly in more U.S. vehicles. Small displacement, turbocharged DISI engines are likely to be used in lieu of large displacement engines, particularly in light-duty trucks and sport utility vehicles, to meet fuel economy standards for 2016. In addition to changes in gasoline engine technology, fuel composition may increase in ethanol content beyond the 10% allowed by current law due to the Renewable Fuels Standard passed as part of the 2007 Energy Independence and Security Act (EISA). In this study, we present the results of an emissions analysis of a U.S.-legal stoichiometric, turbocharged DISI vehicle, operating on ethanol blends, with an emphasis on detailed particulate matter (PM) characterization. Gaseous species, particle mass, and particle number concentration emissions were measured for the Federal Test Procedure urban driving cycle (FTP 75) and the more aggressive US06 cycle. Particle number-size distributions and organic to elemental carbon ratios (OC/EC) were measured for 30 MPH and 80 MPH steady-state operation. In addition, particle number concentration was measured during wide open throttle accelerations (WOTs) and gradual accelerations representative of the FTP 75. For the gaseous species and particle mass measurements, dilution was carried out using a full flow constant volume sampling system (CVS). For the particle number concentration and size distribution measurements, a micro-tunnel dilution system was employed. The vehicles were fueled by a standard test gasoline and 10% (E10) and 20% (E20) ethanol blends from the same supplier. The particle mass emissions were approximately 3 and 7 mg/mile for the FTP75 and US06, respectively, with lower emissions for the ethanol blends. During steady-state operation, the geometric mean diameter of the particle-number size distribution remained approximately the same (50 nm) but the particle number concentration decreased with increasing ethanol content in the fuel. In addition, increasing ethanol content significantly reduced the number concentration of 50 and 100 nm particles during gradual and WOT accelerations.
Book Synopsis The Influence of Ethanol Blends on Particulate Matter Emissions from Gasoline Direct Injection Engines by : Longfei Chen
Download or read book The Influence of Ethanol Blends on Particulate Matter Emissions from Gasoline Direct Injection Engines written by Longfei Chen and published by . This book was released on 2010 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Investigations on the Pollutant Emissions of Gasoline Direct Injection Engines During Cold-start by : Juan Felipe Rodríguez
Download or read book Investigations on the Pollutant Emissions of Gasoline Direct Injection Engines During Cold-start written by Juan Felipe Rodríguez and published by . This book was released on 2016 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the CO2 emission standards around the world become more stringent, the turbocharged downsized gasoline direct injection (GDI) engine provides a mature platform to achieve better fuel economy. For this reason, it is expected that the GDI engine will capture increasing shares of the market during the coming years. The in-cylinder liquid injection, though advantageous in most engine operation regimes, creates emissions challenges during the cold crank-start and cold fast-idle phases. The engine cold-start is responsible for a disproportionate share of the hydrocarbons (HC), nitrogen oxides (NOx) and particulate matter (PM) emitted over the certification cycle. Understanding the sources of the pollutants during this stage is necessary for the further market penetration of GDI under the constraint of tighter emission standards. This work aims to examine the formation processes of the HC, NOx and PM emissions during the cold-start phase in a GDI engine, and the sensitivity of the pollutant emissions to different operation strategies. To this end, a detailed analysis of the crank-start was carried out, in which the first three engine cycles were individually examined. For the steady-state phase, the trade-off between low fast-idle emissions and high exhaust thermal enthalpy flow, necessary for fast catalyst warm-up, is investigated under several operation strategies. The pollutant formation processes are strongly dependent on the mixture formation and on the temperature and pressure history of the combustion process. The results show that unconventional valve timing strategies with large, symmetric, negative valve overlap and delayed combustion phasing are the most effective ways to reduce engine-out emissions during both crank-start and fast-idle phases.
Book Synopsis Nanoparticle Emissions From Combustion Engines by : Jerzy Merkisz
Download or read book Nanoparticle Emissions From Combustion Engines written by Jerzy Merkisz and published by Springer. This book was released on 2015-03-19 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on particulate matter emissions produced by vehicles with combustion engines. It describes the physicochemical properties of the particulate matter, the mechanisms of its formation and its environmental impacts (including those on human beings). It discusses methods for measuring particulate mass and number, including the state-of-the-art in Portable Emission Measurement System (PEMS) equipment for measuring the exhaust emissions of both light and heavy-duty vehicles and buses under actual operating conditions. The book presents the authors’ latest investigations into the relations between particulate emission (mass and number) and engine operating parameters, as well as their new findings obtained through road tests performed on various types of vehicles, including those using diesel particulate filter regeneration. The book, which addresses the needs of academics and professionals alike, also discusses relevant European regulations on particulate emissions and highlights selected methods aimed at the reduction of particulate emissions from automobiles.
Book Synopsis Control Strategy for Hydrocarbon Emissions in Turbocharged Direct Injection Spark Ignition Engines During Cold-start by : Kevin David Cedrone
Download or read book Control Strategy for Hydrocarbon Emissions in Turbocharged Direct Injection Spark Ignition Engines During Cold-start written by Kevin David Cedrone and published by . This book was released on 2013 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gasoline consumption and pollutant emissions from transportation are costly and have serious, demonstrated environmental and health impacts. Downsized, turbocharged direct-injection spark ignition (DISI) gasoline engines consume less fuel and achieve superior performance compared with conventional port fuel injected spark ignition (PFI-SI) engines. Although more efficient, turbocharged DISI engines have new emissions challenges during cold start. DISI fuel injection delivers more liquid fuel into the combustion chamber, increasing the emissions of unburned hydrocarbons. The turbocharger slows down activation (warm-up) of the catalytic exhaust after-treatment system. The objective of this research is to find a control strategy that: 1. Accelerates warm-up of the catalyst, and 2. Maintains low emissions of unburned hydrocarbons (UBHCs) during the catalyst warm-up process. This research includes a broad experimental survey of engine behaviour and emission response for a modern turbocharged DISI engine. The study focuses on the idle period during cold-start for which DISI engine emissions are worst. Engine experiments and simulations show that late and slow combustion lead to high exhaust gas temperatures and mass flow rate for fast warm-up. However, late and slow combustion increase the risk of partial-burn misfire. At the misfire limit for each parameter, the following conclusions are drawn: 1. Late ignition timing is the most effective way to increase exhaust enthalpy flow rate for fast catalyst warm-up. 2. By creating a favourable spatial fuel-air mixture stratification, split fuel injection can simultaneously retard and stabilize combustion to improve emissions and prevent partial-burn misfire. 3. Excessive trapped residuals from long valve overlap limit the potential for valve timing to reduce cold-start emissions. 4. Despite their more challenging evaporation characteristics, fuel blends with high ethanol content showed reasonable emissions behaviour and greater tolerance to late combustion than neat gasoline. 5. Higher exhaust back-pressure leads to high exhaust temperature during the exhaust stroke, leading to significantly more post-flame oxidation. 6. Post-flame oxidation in the combustion chamber and exhaust system play a critical role in decreasing the quantity of catalyst-in emissions due to hydrocarbons that escape primary (flame) combustion. A cold start strategy combining late ignition, 15% excess air, and high exhaust backpressure yielded the lowest cumulative hydrocarbon emissions during cold start.
Book Synopsis Hydrocarbon Emissions in a Homogeneous Direct-injection Spark Engine by : Ronald S. Tharp
Download or read book Hydrocarbon Emissions in a Homogeneous Direct-injection Spark Engine written by Ronald S. Tharp and published by . This book was released on 2008 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to better understand the effects on hydrocarbon emissions of loading, engine temperature, fuel type, and injection timing, a series of experiments was performed. The effect of loading was observed by running the engine at a higher temperature and more open throttle than would typically be observed at fast idle or low load driving. The effects of coolant temperature, the charge motion control valve, spark timing and rail pressure were tested through holding all other variables constant and sweeping through different injection timing to observe the effect on emissions and power output. A new fuel system was designed to allow for the quick testing of different ethanol blends. The system allowed for comparison testing of an 85% ethanol blend to UTG 91 as a function of coolant temperature and injection timing. Measurement of cylinder pressure and hydrocarbon emissions near the exhaust valve allowed for a better understanding of engine operation and the effect of using high ethanol content fuels. Initial testing was also done on 15% and 40% ethanol blends. The results revealed that engine emissions decrease as a function of reduced loading and higher engine temperatures. Sweeps of injection timings for all fuels demonstrated high hydrocarbon emissions for earlier injection timings which fell as injection timing was retarded. A secondary peak was observed in hydrocarbon emissions for an injection timing of approximately 150 CAD aTDC intake. Analysis of rate of fuel injection vs. indicated power revealed a steady decrease in indicated efficiency as injection timing was retarded up to 120 CAD aTDC Intake and then a slow rise in efficiency as the timing was further retarded. The exact causes of the decrease in engine efficiency are unknown; however, possible explanations involve increased heat transfer from the cylinder and piston, fuel loss, and inefficient combustion due to impingement on cold surfaces.
Book Synopsis Assessing the Effects of Ethanol Addition on Particulate Matter Emissions in GDI Engines by : Yihao Zhang (S. M.)
Download or read book Assessing the Effects of Ethanol Addition on Particulate Matter Emissions in GDI Engines written by Yihao Zhang (S. M.) and published by . This book was released on 2018 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Previous research on the effects of ethanol addition on particulate matter (PM) emissions in GDI engines show diverse results. In this thesis, an overview on three major aspects, PM formation, effects of engine operating conditions, and ethanol effects, unveils the large number of factors that can simultaneously affect PM emissions from gasoline-ethanol blends in GDI engines, partially explaining the reasons for the diverse results from previous research. A further experimental work was conducted to assess three potential ethanol effects, displacement effect, evaporative cooling effect, and oxygen content effect. The displacement effect is based on PM Index (PMI) in the literature. Ethanol has very low PMI and thus very low propensity to form PM. Therefore, the addition of ethanol replaces the high-PMI components in the gasoline, lowering PM emissions. Although the PMI value incorporates species reactivity and volatility, it does not take latent heat of vaporization (HOV) into account. The high HOV of ethanol suppresses the fuel evaporation and potentially causes more liquid fuel films, which serve as sources for PM emissions. This evaporative cooling effect was assessed along with the oxygen content effect, a widely used effect in the literature to explain why ethanol lowers PM emissions. Through the method of control variables, the displacement effect and oxygen content effect were separated out and could be assessed individually. The existence of the displacement effect was confirmed. It was also found that the oxygen content effect was negligible, while the evaporative cooling effect changed PN emission significantly. The extent of the evaporative cooling effect depended on operating conditions, such as fuel injection timing, engine coolant temperature, and load.
Book Synopsis Particulate Matter Formation Mechanisms in a Direct-injection Gasoline Engine by : Jared Cromas
Download or read book Particulate Matter Formation Mechanisms in a Direct-injection Gasoline Engine written by Jared Cromas and published by . This book was released on 2003 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Effect of the Seasonal Changes in Fuel Composition on Particulate Matter Emissions from a Gasoline Direct Injection Engine by : Abhikaran Singh
Download or read book Effect of the Seasonal Changes in Fuel Composition on Particulate Matter Emissions from a Gasoline Direct Injection Engine written by Abhikaran Singh and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ministry of Environment and Climate Change (MOECC) found that black carbons (BC) concentrations were significantly higher in summer than in winter, which could be attributed to the seasonal variations in fuel composition. This experimental study investigated the impact of fuel seasonal changes on particulate matter (PM) emissions using a Ford Focus wall-guided GDI engine. Fuels from five public gas stations having octane rating of 87 and 91 were analyzed and tested. This study demonstrated that summer fuels contained higher aromatics than winter fuels which led to higher PM emissions and BC concentrations during steady state and transient state conditions. Moreover, the removal of ethanol content resulted in lower PM emissions and BC concentrations during steady state conditions. This study suggested that an increase in aromatics in summer fuels could be root cause for higher BC concentrations, however, similar study should be performed in other engines to support this conclusion.
Book Synopsis Particulate Matter Formation in Spark-ignition Engines by : David Jonathan Kayes
Download or read book Particulate Matter Formation in Spark-ignition Engines written by David Jonathan Kayes and published by . This book was released on 1999 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Methodology of Measuring Particulate Matter Emissions from a Gasoline Direct Injection Engine by : Phillip Mireault
Download or read book Methodology of Measuring Particulate Matter Emissions from a Gasoline Direct Injection Engine written by Phillip Mireault and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
