Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Nox Removal By Lnt Scr Dual Layer Catalysts
Download Nox Removal By Lnt Scr Dual Layer Catalysts full books in PDF, epub, and Kindle. Read online Nox Removal By Lnt Scr Dual Layer Catalysts ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis NOx Removal by LNT-SCR Dual-layer Catalysts by : Yi Liu
Download or read book NOx Removal by LNT-SCR Dual-layer Catalysts written by Yi Liu and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasingly strict emission standards have driven the progress of NOx storage and reduction (NSR) technology. NOx is stored in a lean NOx trap (LNT) catalyst during fuel-lean mode and reduced to N2 during fuel-rich mode. First, we investigated the impact of ceria on NSR in an Pt/Ce LNT catalyst. The physisorbed oxygen over the ceria-containing LNT catalyst led to a spatio-temporal temperature rise in the monolith upstream after the cyclic introduction of H2/CO to a pre-oxidized catalyst. The stored oxygen over ceria enhanced NO storage by in-situ NO2 formation, while it competed with NO2 for storage sites. During the NOx reduction over the Pt/Ceria, the Pt surface purgation was the first step and the oxygen reduction preceded the NOx reduction. Second, we studied the NSR by dual-layer catalysts consisting of a selective catalytic reduction (SCR) catalyst layer on top of a LNT catalyst. During periodic switching between lean and rich feeds, the LNT layer reduced NOx to N2 and NH3. The SCR layer trapped the latter leading to additional NOx reduction. The dual-layer catalysts exhibited high N2 selectivity and low NH3 selectivity over the temperature range of 150-400 oC. The NOx conversion was incomplete due to undesired NH3 oxidation. The dual-layer catalyst has a higher NOx conversion and N2 selectivity than the LNT catalyst when H2O and CO2 were present in the feed. Ceria was used to adjust the dual-layer catalyst performance. The ceria addition increased NOx storage capacity, promoted hydrothermal durability and mitigated CO poisoning. However, ceria decreased the high-temperature NOx conversion by promoting NH3 oxidation. Ceria zoning led to the highest NOx reduction for both low- and high- temperatures due to the beneficial interaction of ceria and H2. The impact of catalyst design and operation strategy was evaluated. The low-temperature NOx conversion of an aged dual-layer catalyst was increased by a high SCR catalyst loading. The ratio of lean to rich feed duration and the total cycle time were optimized to improve the NOx conversion. The results suggest the dual-layer catalyst could be used to reduce precious metal loading and improve the fuel economy.
Book Synopsis NOx Trap Catalysts and Technologies by : Luca Lietti
Download or read book NOx Trap Catalysts and Technologies written by Luca Lietti and published by Royal Society of Chemistry. This book was released on 2018-06-13 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be the first to comprehensively present the current research on catalysts used for NOx abatement in lean exhausts.
Book Synopsis NOx Trap Catalysts and Technologies by : Luca Lietti
Download or read book NOx Trap Catalysts and Technologies written by Luca Lietti and published by Royal Society of Chemistry. This book was released on 2018-06-13 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle exhaust emissions, particularly from diesel cars, are considered to be a significant problem for the environment and human health. Lean NOx Trap (LNT) or NOx Storage/Reduction (NSR) technology is one of the current techniques used in the abatement of NOx from lean exhausts. Researchers are constantly searching for new inexpensive catalysts with high efficiency at low temperatures and negligible fuel penalties, to meet the challenges of this field. This book will be the first to comprehensively present the current research on this important area. Covering the technology used, from its development in the early 1990s up to the current state-of-the-art technologies and new legislation. Beginning with the fundamental aspects of the process, the discussion will cover the real application standard through to the detailed modelling of full scale catalysts. Scientists, academic and industrial researchers, engineers working in the automotive sector and technicians working on emission control will find this book an invaluable resource.
Book Synopsis Selective Catalytic Reduction of NOx by : Oliver Kröcher
Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by MDPI. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NOx" that was published in Catalysts
Book Synopsis Studies of Platinum Dispersion and Catalyst Architecture for Lean NOx Reduction by : Bijesh Man Shakya
Download or read book Studies of Platinum Dispersion and Catalyst Architecture for Lean NOx Reduction written by Bijesh Man Shakya and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of NOx storage and reduction (NSR) and selective catalytic reduction (SCR) catalyst is a promising technology for the reduction of NOx emission from the exhaust of lean-burn or diesel engine vehicles. In the combined NSR/SCR system, NH3 generated in LNT during the rich phase is utilized in the SCR for additional NOx conversion. Therefore, the performance of the combined NSR/SCR depends strongly on the NH3 generating function of the NSR catalyst. Earlier studies show that lower Pt dispersion NSR catalysts give higher selectivity to NH3 making them ideal candidates for this particular application. In the first part of the work, we performed experiments on lower Pt dispersion catalysts to gain insights on the mechanistic effects of Pt dispersion on NOx conversion and selectivity. We also developed an improved crystallite-scale model of NSR that explicitly accounts for the crystallite scale gradients of the stored NOx. The calibrated model is able to capture the effects of Pt dispersion, rich phase duration and overall cycle time on cycle-averaged conversion and selectivity trends. In the second part, we carried out a simulation study of dual-layer NSR+SCR monolithic catalyst using (1+1)-D model of catalytic monolith with individually-calibrated global kinetic models. Simulations show that multiple combinations of catalyst loading can attain a given NOx conversion and N2 selectivity, and that there exists a loading of SCR washcoat for a given NSR catalyst for which the NOx conversion is maximum. Simulations of the dual-brick monolith are also performed to analyze the effects of catalyst architecture. Under identical conditions, the simulations show that dual-layer catalyst outperforms the dual-brick largely because of the better utilization of generated NH3. Finally, we performed an optimization study to identify optimal loading and configuration of combined Fe+Cu zeolite catalyst that gives overall high NOx removal efficiency over a broad range of temperature. Simulations suggest that the brick configuration in which Fe- brick is followed by Cu- catalyst is slightly better than dual-layer in which Fe- is coated on top of Cu- architecture. This is attributed to the diffusional limitations in the washcoat that is more pronounced in the dual-layer catalysts.
Book Synopsis Selective Catalytic Reduction of NOx by : Oliver Kröcher
Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The most efficient process to reduce NOx emissions from lean exhaust gases, selective catalytic reduction (SCR) with ammonia, has undergone tremendous development over the past decades. Originally only applied in stationary power plants and industrial installations, SCR systems are now installed in millions of mobile diesel engines, ranging from off-road machineries, to heavy-duty and light-duty trucks and passenger cars, to locomotives and ships. All of these applications involve specific challenges due to tighter emission limits, new internal combustion engine technologies, or alternative fuels. Three review articles and 14 research articles in this book describe recent results and research trends of various aspects of the SCR process. Reaction engineering aspects, such as the proper dosage of ammonia or urea, respectively, are as important as further developments of the different SCR catalysts, by deepening the understanding of their functionality or by systematic improvements of their properties, such as low-temperature activity, selectivity, or poisoning-resistance. Another covered aspect is cost reduction through the use of cheaper base materials for the production is active and stable SCR catalysts. Finally, research efforts are reported to develop SCR processes with different reducing agents, which would open doors to new applications in the future. The range of topics addressed in this book will stimulate the reader's interest as well as provide a valuable source of information for researchers in academia and industry.
Book Synopsis Selective Catalytic Reduction and NOx Control in Japan by : Gary Dair Jones
Download or read book Selective Catalytic Reduction and NOx Control in Japan written by Gary Dair Jones and published by . This book was released on 1981 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Selective Catalytic Reduction Technology for the Control of Nitrogen Oxide Emissions from Coal-Fired Boilers by : Gene Knight
Download or read book Selective Catalytic Reduction Technology for the Control of Nitrogen Oxide Emissions from Coal-Fired Boilers written by Gene Knight and published by DIANE Publishing. This book was released on 2008-08 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Clean Coal Technology Demo. Program (CCTDP) is an effort to demonstrate a new generation of innovative coal utilization processes in a series of facilities built across the country. These projects are carried out on a commercial scale to prove technical feasibility and provide the info. required for future applications. Projects have demonstrated technical options with the potential to meet the needs of energy markets while satisfying environ. requirements. Part of this program is the demo. of technologies designed to reduce emissions of oxides of nitrogen (NOx) from existing coal-fired utility boilers. This report summarizes the status of selective catalytic reduction (SCR) technology for the control of NOx emissions from high-sulfur, coal-fired boilers. Illus.
Book Synopsis Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts by : Isabella Nova
Download or read book Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Book Synopsis Development of Optimal Catalyst Designs and Operating Strategies for Lean NOx Reduction in Coupled LNT-SCR Systems by :
Download or read book Development of Optimal Catalyst Designs and Operating Strategies for Lean NOx Reduction in Coupled LNT-SCR Systems written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Experimental and Kinetic Modeling Studies of Selective Catalytic Reduction of NOx with NH3 on Fe- and Cu-Zeolite Monolithic Catalysts by : Pranit Subhash Metkar
Download or read book Experimental and Kinetic Modeling Studies of Selective Catalytic Reduction of NOx with NH3 on Fe- and Cu-Zeolite Monolithic Catalysts written by Pranit Subhash Metkar and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The selective catalytic reduction (SCR) of NOx with NH3 is considered to be the most promising technique for the efficient reduction of highly detrimental NOx (to N2) emitted from diesel engine vehicles. Amongst the various catalysts available for SCR, Fe- and Cu-zeolite catalysts are found to be highly stable and efficient towards maximum NOx reduction over a wide temperature range. Cu-zeolites are more active at low temperatures ( 350 oC) while Fe-zeolites are more active at high temperatures ( 400 oC). We carried out a comprehensive experimental and kinetic modeling study of key SCR reactions on Fe- and Cu-zeolite catalysts and present a detailed understanding of mass transfer limitations and kinetics and mechanistic aspects of various SCR reactions on these catalysts. Experiments carried out on monolith catalysts having different washcoat loadings, washcoat thicknesses and lengths indicate the presence of washcoat (or pore) diffusion limitations at intermediate to high temperature range in all the SCR reactions. A detailed analysis of the effect of temperature on the transitions between various controlling regimes (kinetic, washcoat diffusion and external mass transfer) is presented. Agreement in the differential kinetics studies of NO oxidation and standard SCR (NO + O2 + NH3) reactions indicates NO oxidation is the rate determining step for standard SCR. A detailed kinetic model capturing key features of all the SCR reactions is developed. This model accurately predicts the experimentally observed NOx conversions over a wide temperature range and different feed conditions. Finally, a systematic study of various SCR reactions is carried out on a combined system of Fe- and Cu-zeolite monolithic catalysts to determine if a high NOx conversion could be sustained over a wider temperature range than with individual Fe- and Cu-zeolite catalysts. Amongst various configurations, a dual-layer catalyst with a thin Fe-zeolite layer on top of a thick Cu-zeolite layer resulted in a very high NOx removal efficiency over a broad temperature range of practical interest. The kinetic model accurately captures the experimental data with a combined system of Fe- and Cu-zeolite catalysts and provides further insights into the catalyst arrangements for maximum NOx reduction efficiency.
Book Synopsis A Lean NOx Trap+Selective Catalytic Reduction System for Controlling the NOx Emissions from a Diesel Engine by : Joseph R. Theis
Download or read book A Lean NOx Trap+Selective Catalytic Reduction System for Controlling the NOx Emissions from a Diesel Engine written by Joseph R. Theis and published by . This book was released on 2006 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Congressionally Directed Project for Passive NOx Removal Catalysts Research by :
Download or read book Congressionally Directed Project for Passive NOx Removal Catalysts Research written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Recipient proposes to produce new scientific and technical knowledge and tools to enable the discovery and deployment of highly effective materials for the selective catalytic reduction (SCR) of nitrogen oxides (NOx) from lean combustion exhaust. A second goal is to demonstrate a closely coupled experimental and computational approach to heterogeneous catalysis research. These goals will be met through the completion of four primary technical objectives: First, an in-depth kinetic analysis will be performed on two prominent classes of NOx SCR catalysts, Fe- and Cu-exchanged beta and ZSM-5 zeolites, over a wide range of catalyst formulation and under identical, high conversion conditions as a function of gas phase composition. Second, the nanoscale structure and adsorption chemistry of these high temperature (HT) and low temperature (LT) catalysts will be determined using in situ and operando spectroscopy under the same reaction conditions. Third, first-principles molecular simulations will be used to model the metal-zeolite active sites, their adsorption chemistry, and key steps in catalytic function. Fourth, this information will be integrated into chemically detailed mechanistic and kinetic descriptions and models of the operation of these well- defined NOx SCR catalysts under practically relevant reaction conditions. The new knowledge and models that derive from this work will be published in the scientific literature.
Book Synopsis Lean NOx Trap Catalysis for Lean Burn Natural Gas Engines by :
Download or read book Lean NOx Trap Catalysis for Lean Burn Natural Gas Engines written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As the nation's demand for energy grows along with concern for the environment, there is a pressing need for cleaner, more efficient forms of energy. The internal combustion engine is well established as one of the most reliable forms of power production. They are commercially available in power ranges from 0.5 kW to 6.5 MW, which make them suitable for a wide range of distributed power applications from small scale residential to large scale industrial. In addition, alternative fuels with domestic abundance, such as natural gas, can play a key role in weaning our nations dependence on foreign oil. Lean burn natural gas engines can achieve high efficiencies and can be conveniently placed anywhere natural gas supplies are available. However, the aftertreatment of Nox emissions presents a challenge in lean exhaust conditions. Unlike carbon monoxide and hydrocarbons, which can be catalytically reduced in lean exhaust, NOx emissions require a net reducing atmosphere for catalytic reduction. Unless this challenge of NOx reduction can be met, emissions regulations may restrict the implementation of highly efficient lean burn natural gas engines for stationary power applications. While the typical three-way catalyst is ineffective for NOx reduction under lean exhaust conditions, several emerging catalyst technologies have demonstrated potential. The three leading contenders for lean burn engine de-NOx are the Lean NOx Catalyst (LNC), Selective Catalytic Reduction (SCR) and the Lean Nox Trap (LNT). Similar to the principles of SCR, an LNT catalyst has the ability to store NOx under lean engine operation. Then, an intermittent rich condition is created causing the stored NOx to be released and subsequently reduced. However, unlike SCR, which uses urea injection to create the reducing atmosphere, the LNT can use the same fuel supplied to the engine as the reductant. LNT technology has demonstrated high reduction efficiencies in diesel applications where diesel fuel is the reducing agent. The premise of this research is to explore the application of Lean NOx Trap technology to a lean burn natural gas engine where natural gas is the reducing agent. Natural gas is primarily composed of methane, a highly stable hydrocarbon. The two primary challenges addressed by this research are the performance of the LNT in the temperature ranges experienced from lean natural gas combustion and the utilization of the highly stable methane as the reducing agent. The project used an 8.3 liter lean burn natural gas engine on a dynamometer to generate the lean exhaust conditions. The catalysts were packaged in a dual path aftertreatment system, and a set of valves were used to control the flow of exhaust to either leg during adsorption and regeneration.
Book Synopsis Simultaneous Catalytic Removal of Diesel Soot and NOx by : Wenfeng Shangguan
Download or read book Simultaneous Catalytic Removal of Diesel Soot and NOx written by Wenfeng Shangguan and published by Springer. This book was released on 2018-06-28 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book not only explores catalysis processes in redox reactions but also proposes a potential after-treatment strategy. Summarizing the authors’ major works, it offers a guidebook for those working on environmental and industrial catalysis. It presents insights into reaction kinetics in a variety of materials and analyzes the external conditions influencing the reaction. As such it is of particular interest to engineers and scientists in the field of material chemistry, chemical engineering and automobile industry. With novel images and illustrations, it provides a new perspective for interpreting soot abatement material and understanding the reaction process and inspires scientists to design new catalysts with moderate redox capacity.
Book Synopsis Automotive Emissions Regulations and Exhaust Aftertreatment Systems by : John Kasab
Download or read book Automotive Emissions Regulations and Exhaust Aftertreatment Systems written by John Kasab and published by SAE International. This book was released on 2020-08-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present a fundamental development of the science and engineering underlying the design of exhaust aftertreatment systems for automotive internal combustion engines. No pre-requisite knowledge of the field is required: our objective is to acquaint the reader, whom we expect to be new to the field of emissions control, with the underlying principles, control methods, common problems, and fuel effects on catalytic exhaust aftertreatment devices. We do this in hope that they can better understand the previous and current generations of emissions control, and improve upon them. This book is designed for the engineer, researcher, designer, student, or any combination of those, who is concerned with the control of automotive exhaust emissions. It includes discussion of theory and fundamentals applicable to hardware development.
Book Synopsis Nanocatalysts in Environmental Applications by : Samira Bagheri
Download or read book Nanocatalysts in Environmental Applications written by Samira Bagheri and published by Springer. This book was released on 2018-02-09 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a range of nanocatalysts, together with their primary environmental applications and use in chemical production processes. In addition, it describes the nanomaterials used for catalysts and details their performance. The book introduces readers to the fundamentals and applications of nanocatalysis, synthesis, characterization, modification and application. Further topics include: landfill organic pollutant photodegradation; magnetic photocatalysis; synergistic effects on hydrogenated TiO2; and photoinduced fusion of gold-semiconductor nanoparticles. A detailed explanation of the chemistry of nanostructures and the ability to control materials at the nano-scale rounds out the coverage. Given the central importance of research in nanotechnology and nanoscience for the development of new catalysts, the book offers a valuable source of information for researchers and academics alike. It will also benefit industrial engineers and production managers who wish to understand the environmental impact of nanocatalysts.
