New Materials By Mechanical Alloying Techniques

Download New Materials By Mechanical Alloying Techniques full books in PDF, epub, and Kindle. Read online New Materials By Mechanical Alloying Techniques ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Mechanical Alloying

Author : Li Lü
Publisher : Springer Science & Business Media
ISBN 13 : 9780792380665
Total Pages : 302 pages
Book Rating : 4.3/5 (86 download)

DOWNLOAD NOW!

Book Synopsis Mechanical Alloying by : Li Lü

Download or read book Mechanical Alloying written by Li Lü and published by Springer Science & Business Media. This book was released on 1997-11-30 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical alloying (or mechanical milling) was invented in the 1970's as a method to develop dispersion-strengthened high temperature alloys with unique properties. With the discovery of formation of amorphous alloys using this technique, it has received new research interest in developing different material systems. Potential applications of this technique have been demonstrated in different areas of materials research. This book is intended as an introduction to mechanical alloying technique used in difference areas. This book contains basic information on the preparation of materials using the mechanical alloying technique. It is useful not only to undergraduate and post-graduate students, but also to scientists and engineers who wish to gain some understanding on the basic process and mechanisms of the process. The book begins with a brief introduction to provide a historical background understanding to the development of the mechanical alloying process. The experimental set-up in the alloying process is important. Currently there are different types of ball mills available. Some of them are specially designed for mechanical alloying process. Since the resultant materials are milling intensity and milling temperature dependent, ball mills should be carefully selected in order to obtain the desired materials and structures. This is discussed in chapter 2. The actual mechanical alloying process is being considered in Chapter 3. As it is essential to understand the use of processing control agents, the physical properties of some commonly used processing control agents are listed.

Mechanical Alloying And Milling

Author : Cury Suryanarayana
Publisher : CRC Press
ISBN 13 : 0203020642
Total Pages : 488 pages
Book Rating : 4.2/5 (3 download)

DOWNLOAD NOW!

Book Synopsis Mechanical Alloying And Milling by : Cury Suryanarayana

Download or read book Mechanical Alloying And Milling written by Cury Suryanarayana and published by CRC Press. This book was released on 2004-09-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys the broad field of mechanical alloying from a scientific and technological perspective to form a timely and comprehensive resource valuable to both students and researchers. The treatment progresses from the historical background through a description of the process, the different metastable effects produced, and the mechanisms of

New Materials by Mechanical Alloying Techniques

Author : Eduard Arzt
Publisher :
ISBN 13 :
Total Pages : 390 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis New Materials by Mechanical Alloying Techniques by : Eduard Arzt

Download or read book New Materials by Mechanical Alloying Techniques written by Eduard Arzt and published by . This book was released on 1989 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Mechanical Alloying

Author : M. Sherif El-Eskandarany
Publisher : William Andrew
ISBN 13 : 0815518242
Total Pages : 259 pages
Book Rating : 4.8/5 (155 download)

DOWNLOAD NOW!

Book Synopsis Mechanical Alloying by : M. Sherif El-Eskandarany

Download or read book Mechanical Alloying written by M. Sherif El-Eskandarany and published by William Andrew. This book was released on 2001-06-26 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique in bringing about a solid-state reaction at room temperature, mechanical alloying produces powders and compounds difficult or impossible to obtain by conventional techniques. Immediate and cost-effective industry applications of the resultant advanced materials are in cutting tools and high performance aerospace products such as metal matrix armor and turbine blades. The book is a guided introduction to mechanical alloying, covering material requirements equipment, processing, and engineering properties and characteristics of the milled powders. Chapters 3 and 4 treat the fabrication of nanophase materials and nanophase composite materials. Chapter 8 provides extensive coverage of metallic glass substances.This book is ideal for materials scientists in industry and in research, design, processing, and plant engineers in the cutting tools and aerospace industries as well as senior level students in metallurgical and mechanical materials engineering. The book will especially benefit metallurgists unacquainted with ball milling fabrication.

Mechanical Alloying

Author : M. Sherif El-Eskandarany
Publisher : Elsevier
ISBN 13 : 0323221289
Total Pages : 350 pages
Book Rating : 4.3/5 (232 download)

DOWNLOAD NOW!

Book Synopsis Mechanical Alloying by : M. Sherif El-Eskandarany

Download or read book Mechanical Alloying written by M. Sherif El-Eskandarany and published by Elsevier. This book was released on 2015-05-13 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a detailed introduction to mechanical alloying, offering guidelines on the necessary equipment and facilities needed to carry out the process and giving a fundamental background to the reactions taking place. El-Eskandarany, a leading authority on mechanical alloying, discusses the mechanism of powder consolidations using different powder compaction processes. A new chapter will also be included on thermal, mechanically-induced and electrical discharge-assisted mechanical milling. Fully updated to cover recent developments in the field, this second edition also introduces new and emerging applications for mechanical alloying, including the fabrication of carbon nanotubes, surface protective coating and hydrogen storage technology. El-Eskandarany discusses the latest research into these applications, and provides engineers and scientists with the information they need to implement these developments. The industrial applications of nanocrystalline and metallic glassy powders are presented. The book also contains over 200 tables and graphs to illustrate the milling processes and present the properties and characteristics of the resulting materials. - Guides readers through each step of the mechanical alloying process, covering best practice techniques and offering guidelines on the required equipment - Tables and graphs are used to explain the stages of the milling processes and provide an understanding of the properties and characteristics of the resulting materials - A comprehensive update on the previous edition, including new chapters to cover new applications

Powder Materials

Author : Fernand D. S. Marquis
Publisher : Wiley-TMS
ISBN 13 :
Total Pages : 340 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Powder Materials by : Fernand D. S. Marquis

Download or read book Powder Materials written by Fernand D. S. Marquis and published by Wiley-TMS. This book was released on 2003 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiling presentations from scientists, engineers, and manufacturers, this book will include papers on powder making, powder conditions, reactive powder handling, powder characterization, hot and cold uniaxial pressing, hot and cold isostatic pressing, powder rolling, extrusion, sintering, heat treatment and processing facilities, rapid and directional solidification, consolidation, in-situ synthesis of composites, ceramics and intermetallics, atmospheric and low-pressure plasma spray, flame spray, wire-arc spray, alloy and materials development, mechanical behavior of bulk powder-based materials, physical-based mathematical models, theories, simulation, micromechanisms, and end-use products. From Materials Science & Technology 2003 to be held in Chicago, Illinois, November 9-12, 2003.

High-Energy Ball Milling

Author : Małgorzata Sopicka-Lizer
Publisher : Elsevier
ISBN 13 : 1845699440
Total Pages : 436 pages
Book Rating : 4.8/5 (456 download)

DOWNLOAD NOW!

Book Synopsis High-Energy Ball Milling by : Małgorzata Sopicka-Lizer

Download or read book High-Energy Ball Milling written by Małgorzata Sopicka-Lizer and published by Elsevier. This book was released on 2010-05-24 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemical processing is a novel and cost effective method of producing a wide range of nanopowders. It involves the use of a high energy ball mill to initiate chemical reactions and structural changes. High energy ball milling: Mechanochemical processing of nanopowders reviews the latest techniques in mechanochemistry and how they can be applied to the synthesis and processing of various high-tech materials.Part one discusses the basic science of mechanochemistry with chapters on such topics as the mechanism and kinetics of mechanochemical processes, kinetic behaviour in mechanochemically-induced structural and chemical transformations and materials design through mechanochemical processing. Part two reviews mechanochemical treatment of different materials including synthesis of complex ceramic oxides, production of intermetallic compound powders, synthesis of organic compounds, synthesis of metallic-ceramic composite powders and activation of covalent bond-based materials. Part three covers mechanochemical processes in metal powder systems and other applications with coverage of topics such as plating and surface modification using ultrasonic vibrations, activated powders as precursors for spark plasma sintering, titanium dioxide photocatalyst synthesis by mechanochemical doping and synthesis of materials for lithium-ion batteries.With its distinguished editor and international team of contributors, High energy ball milling: Mechanochemical processing of nanopowders is a standard reference for all those involved in the production of ceramic and metallic components using sintering and other powder metallurgy techniques to produce net shape components. - Examines the latest techniques in mechanochemistry and how they can be applied to the synthesis and processing of various high-tech materials - Discusses the basic science of mechanochemistry including kinetic behaviour, processes and mechanisms and materials design through mechanochemical processing - Reviews mechanochemical treatment of different materials including synthesis of ceramic oxides, organic compounds and metallic-ceramic composite powders

Alloying

Author : Joseph R. Davis
Publisher : ASM International
ISBN 13 : 1615030638
Total Pages : 658 pages
Book Rating : 4.6/5 (15 download)

DOWNLOAD NOW!

Book Synopsis Alloying by : Joseph R. Davis

Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.

Mechanical Alloying

Author : Joan-Josep Suñol
Publisher : Mdpi AG
ISBN 13 : 9783036521176
Total Pages : 134 pages
Book Rating : 4.5/5 (211 download)

DOWNLOAD NOW!

Book Synopsis Mechanical Alloying by : Joan-Josep Suñol

Download or read book Mechanical Alloying written by Joan-Josep Suñol and published by Mdpi AG. This book was released on 2021-09-29 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical alloying is a technique of producing alloys and compounds that permits the development of metastable materials (with amorphous or nanocrystalline microstructure) or the fabrication of solid solutions with extended solubility. The elements or compounds to be mixed (usually as powders) are introduced in jars usually under a controlled atmosphere. Regarding the scope of this book, advanced materials have been developed by mechanical alloying: Fe-X-B-Cu (X = Nb, NiZr) nanocrystalline alloys, mixtures of the binary Fe-Mn and Fe-Cr alloys with chromium and manganese nitrides, Mn-Al-Co and Mn-Fe alloys, non-equiatomic refractory high-entropy alloys, nanocrystalline Fe-Cr steels, nanaocrystalline Mn-Co-Fe-Ge-Si alloys, Al-Y2O3 nanocomposite, and hydride-forming alloys. Likewise, production conditions and ulterior treatments can provide readers interesting ideas about the procedure to produce alloys with specific microstructure and functional behavior (mechanical, magnetic, corrosion resistance, hydrogen storage, magnetocaloric effect, wastewater treatment, and so on). As an example, to obtain the improvement in the functional properties of the alloys and compounds, sometimes controlled annealing is needed (annealing provokes the relaxation of the mechanical-induced strain). Furthermore, the powders can be consolidated (press, spark plasma sintering, and microwave sintering) to obtain bulk materials.

Experimental Techniques in Materials and Mechanics

Author : C. Suryanarayana
Publisher : CRC Press
ISBN 13 : 1439819041
Total Pages : 470 pages
Book Rating : 4.4/5 (398 download)

DOWNLOAD NOW!

Book Synopsis Experimental Techniques in Materials and Mechanics by : C. Suryanarayana

Download or read book Experimental Techniques in Materials and Mechanics written by C. Suryanarayana and published by CRC Press. This book was released on 2011-06-27 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Techniques in Materials and Mechanics provides a detailed yet easy-to-follow treatment of various techniques useful for characterizing the structure and mechanical properties of materials. With an emphasis on techniques most commonly used in laboratories, the book enables students to understand practical aspects of the methods and derive the maximum possible information from the experimental results obtained. The text focuses on crystal structure determination, optical and scanning electron microscopy, phase diagrams and heat treatment, and different types of mechanical testing methods. Each chapter follows a similar format: Discusses the importance of each technique Presents the necessary theoretical and background details Clarifies concepts with numerous worked-out examples Provides a detailed description of the experiment to be conducted and how the data could be tabulated and interpreted Includes a large number of illustrations, figures, and micrographs Contains a wealth of exercises and references for further reading Bridging the gap between lecture and lab, this text gives students hands-on experience using mechanical engineering and materials science/engineering techniques for determining the structure and properties of materials. After completing the book, students will be able to confidently perform experiments in the lab and extract valuable data from the experimental results.

Handbook of Non-Ferrous Metal Powders

Author : Oleg D Neikov
Publisher : Elsevier
ISBN 13 : 0080559409
Total Pages : 644 pages
Book Rating : 4.0/5 (85 download)

DOWNLOAD NOW!

Book Synopsis Handbook of Non-Ferrous Metal Powders by : Oleg D Neikov

Download or read book Handbook of Non-Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now.Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals).The result is a formidable reference source for those in all aspects of the metal powder industry. - Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Expert Russian team of authors, all very experienced - English translation and update of book previously published in Russian

Nanostructured Metals and Alloys

Author : S H Whang
Publisher : Elsevier
ISBN 13 : 0857091123
Total Pages : 840 pages
Book Rating : 4.8/5 (57 download)

DOWNLOAD NOW!

Book Synopsis Nanostructured Metals and Alloys by : S H Whang

Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties.One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying.With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.

New Materials for Next-Generation Commercial Transports

Author : Committee on New Materials for Advanced Civil Aircraft
Publisher : National Academies Press
ISBN 13 : 0309588782
Total Pages : 99 pages
Book Rating : 4.3/5 (95 download)

DOWNLOAD NOW!

Book Synopsis New Materials for Next-Generation Commercial Transports by : Committee on New Materials for Advanced Civil Aircraft

Download or read book New Materials for Next-Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.

Advances in Powder Metallurgy

Author : Isaac Chang
Publisher : Elsevier
ISBN 13 : 085709890X
Total Pages : 624 pages
Book Rating : 4.8/5 (57 download)

DOWNLOAD NOW!

Book Synopsis Advances in Powder Metallurgy by : Isaac Chang

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. - Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques - Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys - Reviews the manufacture and densification of PM components and explores joining techniques

Titanium Alloys

Author : W Sha
Publisher : Elsevier
ISBN 13 : 1845695860
Total Pages : 588 pages
Book Rating : 4.8/5 (456 download)

DOWNLOAD NOW!

Book Synopsis Titanium Alloys by : W Sha

Download or read book Titanium Alloys written by W Sha and published by Elsevier. This book was released on 2009-04-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their growing importance in the aerospace, automotive, sports and medical sectors, modelling the microstructure and properties of titanium and its alloys is a vital part of research into the development of new applications. This is the first time a book has been dedicated to modelling techniques for titanium.Part one discusses experimental techniques such as microscopy, synchrotron radiation X-ray diffraction and differential scanning calorimetry. Part two reviews physical modelling methods including thermodynamic modelling, the Johnson-Mehl-Avrami method, finite element modelling, the phase-field method, the cellular automata method, crystallographic and fracture behaviour of titanium aluminide and atomistic simulations of interfaces and dislocations relevant to TiAl. Part three covers neural network models and Part four examines surface engineering products. These include surface nitriding: phase composition, microstructure, mechanical properties, morphology and corrosion; nitriding: modelling of hardness profiles and kinetics; and aluminising: fabrication of Ti coatings by mechanical alloying.With its distinguished authors, Titanium alloys: Modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with titanium modelling, as well as users of titanium, titanium alloys and titanium aluminide in the aerospace, automotive, sports and medical implant sectors. - Comprehensively assesses modelling techniques for titanium, including experimental techniques such as microscopy and differential scanning calorimetry - Reviews physical modelling methods including thermodynamic modelling and finite element modelling - Examines surface engineering products with specific chapters focused on surface nitriding and aluminising

Mechanical Alloying

Author : Li Lü
Publisher : Springer Science & Business Media
ISBN 13 : 1461555094
Total Pages : 283 pages
Book Rating : 4.4/5 (615 download)

DOWNLOAD NOW!

Book Synopsis Mechanical Alloying by : Li Lü

Download or read book Mechanical Alloying written by Li Lü and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical alloying (or mechanical milling) was invented in the 1970's as a method to develop dispersion-strengthened high temperature alloys with unique properties. With the discovery of formation of amorphous alloys using this technique, it has received new research interest in developing different material systems. Potential applications of this technique have been demonstrated in different areas of materials research. This book is intended as an introduction to mechanical alloying technique used in difference areas. This book contains basic information on the preparation of materials using the mechanical alloying technique. It is useful not only to undergraduate and post-graduate students, but also to scientists and engineers who wish to gain some understanding on the basic process and mechanisms of the process. The book begins with a brief introduction to provide a historical background understanding to the development of the mechanical alloying process. The experimental set-up in the alloying process is important. Currently there are different types of ball mills available. Some of them are specially designed for mechanical alloying process. Since the resultant materials are milling intensity and milling temperature dependent, ball mills should be carefully selected in order to obtain the desired materials and structures. This is discussed in chapter 2. The actual mechanical alloying process is being considered in Chapter 3. As it is essential to understand the use of processing control agents, the physical properties of some commonly used processing control agents are listed.

Advanced Surface Coating Techniques for Modern Industrial Applications

Author : Roy, Supriyo
Publisher : IGI Global
ISBN 13 : 179984871X
Total Pages : 342 pages
Book Rating : 4.7/5 (998 download)

DOWNLOAD NOW!

Book Synopsis Advanced Surface Coating Techniques for Modern Industrial Applications by : Roy, Supriyo

Download or read book Advanced Surface Coating Techniques for Modern Industrial Applications written by Roy, Supriyo and published by IGI Global. This book was released on 2020-09-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering, there are often situations in which the material of the main component is unable to sustain long life or protect itself from adverse operating environments. Moreover, in some cases, different material properties such as anti-friction and wear, anti-corrosive, thermal resistive, super hydrophobic, etc. are required as per the operating conditions. If those bulk components are made of such materials and possess those properties, the cost will be very high. In such cases, a practical solution is surface coating, which serves as a protective barrier to the bulk material from the adverse environment. In the last decade, with enormous effort, researchers and scientists have developed suitable materials to overcome those unfavorable operating conditions, and they have used advanced deposition techniques to enhance the adhesion and surface texturing of the coatings. Advanced Surface Coating Techniques for Modern Industrial Applications is a highly sought reference source that compiles the recent research trends in these new and emerging surface coating materials, deposition techniques, properties of coated materials, and their applications in various engineering and industrial fields. The book particularly focuses on 1) coating materials including anti-corrosive materials and nanomaterials, 2) coating methods including thermal spray and electroless disposition, and 3) applications such as surface engineering and thin film application. The book is ideal for engineers, scientists, researchers, academicians, and students working in fields like material science, mechanical engineering, tribology, chemical and corrosion science, bio-medical engineering, biomaterials, and aerospace engineering.