Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Multiscale Methods And Application To The Mechanics Of Carbon Nanotubes
Download Multiscale Methods And Application To The Mechanics Of Carbon Nanotubes full books in PDF, epub, and Kindle. Read online Multiscale Methods And Application To The Mechanics Of Carbon Nanotubes ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Carbon Nanotube-Reinforced Polymers by : Roham Rafiee
Download or read book Carbon Nanotube-Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Book Synopsis Mechanics of Carbon Nanotubes by : Vasyl Harik
Download or read book Mechanics of Carbon Nanotubes written by Vasyl Harik and published by Academic Press. This book was released on 2018-07-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Carbon Nanotubes: Fundamentals, Modeling and Safety draws on the latest academic research and nanotechnology applications to provide a comprehensive guide on the most recent developments in the science of carbon nanotubes. The fundamentals of nanomechanics and mechanical behavior of carbon nanotubes are presented in initial chapters, followed by more advanced topics such as the classification of carbon nanotubes, carbon nanotubes in nanocomposites, multiwall carbon nanotubes, and recent trends.This book provides a system for the classification of carbon nanotubes into 20 classes, aiding correct selection for various applications, and includes the Atomic Registry Matrix Analysis for nanoscale interfaces, essential for design involving friction or sliding. Parametric maps are included to help readers pick the correct model for a particular CNT geometry, in addition to a thorough examination of the effective thickness paradox and safety issues related to CNTs, such as toxicity at high aspect ratio.Mechanics of Carbon Nanotubes is essential reading for anyone involved in research or engineering that includes carbon nanotubes, be they students or seasoned professionals in the field. It is particularly useful to those working with applications in the areas of microelectronics, robotics, aerospace, composites, or prosthetics. - Provides a system for the classification of carbon nanotubes, aiding correct selection for various applications - Includes the Matrix Registry Analysis for nanoscale interfaces that is essential for design involving friction or sliding - Features parametric maps to help readers pick the right model for a particular CNT geometry (beam vs. shell vs. thin or thick shells, etc.) - Presents a thorough examination of the safety issues related to CNTs, including toxicity at high aspect ratio
Book Synopsis Multiscale Simulations and Mechanics of Biological Materials by : Shaofan Li
Download or read book Multiscale Simulations and Mechanics of Biological Materials written by Shaofan Li and published by John Wiley & Sons. This book was released on 2013-03-19 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale Simulations and Mechanics of Biological Materials A compilation of recent developments in multiscale simulation and computational biomaterials written by leading specialists in the field Presenting the latest developments in multiscale mechanics and multiscale simulations, and offering a unique viewpoint on multiscale modelling of biological materials, this book outlines the latest developments in computational biological materials from atomistic and molecular scale simulation on DNA, proteins, and nano-particles, to meoscale soft matter modelling of cells, and to macroscale soft tissue and blood vessel, and bone simulations. Traditionally, computational biomaterials researchers come from biological chemistry and biomedical engineering, so this is probably the first edited book to present work from these talented computational mechanics researchers. The book has been written to honor Professor Wing Liu of Northwestern University, USA, who has made pioneering contributions in multiscale simulation and computational biomaterial in specific simulation of drag delivery at atomistic and molecular scale and computational cardiovascular fluid mechanics via immersed finite element method. Key features: Offers a unique interdisciplinary approach to multiscale biomaterial modelling aimed at both accessible introductory and advanced levels Presents a breadth of computational approaches for modelling biological materials across multiple length scales (molecular to whole-tissue scale), including solid and fluid based approaches A companion website for supplementary materials plus links to contributors’ websites (www.wiley.com/go/li/multiscale)
Book Synopsis Multiscale Biomechanics by : Soheil Mohammadi
Download or read book Multiscale Biomechanics written by Soheil Mohammadi and published by John Wiley & Sons. This book was released on 2023-06-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: MULTISCALE BIOMECHANICS Model biomechanical problems at multiple scales with this cutting-edge technology Multiscale modelling is the set of techniques used to solve physical problems which exist at multiple scales either in space or time. It has been shown to have significant applications in biomechanics, the study of biological systems and their structures, which exist at scales from the macroscopic to the microscopic and beyond, and which produce a myriad of overlapping problems. The next generation of biomechanical researchers therefore has need of the latest multiscale modelling techniques. Multiscale Biomechanics offers a comprehensive introduction to these techniques and their biomechanical applications. It includes both the theory of multiscale biomechanical modelling and its practice, incorporating some of the latest research and surveying a wide range of multiscale methods. The result is a thorough yet accessible resource for researchers looking to gain an edge in their biomechanical modelling. Multiscale Biomechanics readers will find: Practical biomechanical applications for a variety of multiscale methods Detailed discussion of soft and hard tissues, and more An introduction to analysis of advanced topics ranging from stenting, drug delivery systems, and artificial intelligence in biomechanics Multiscale Biomechanics is a useful reference for researchers and scientists in any of the life sciences with an interest in biomechanics, as well as for graduate students in mechanical, biomechanical, biomedical, civil, material, and aerospace engineering.
Book Synopsis Nano Mechanics and Materials by : Wing Kam Liu
Download or read book Nano Mechanics and Materials written by Wing Kam Liu and published by John Wiley & Sons. This book was released on 2006-08-30 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a progressive research and development topic with large amounts of venture capital and government funding being invested worldwide. Nano mechanics, in particular, is the study and characterization of the mechanical behaviour of individual atoms, systems and structures in response to various types of forces and loading conditions. This text, written by respected researchers in the field, informs researchers and practitioners about the fundamental concepts in nano mechanics and materials, focusing on their modelling via multiple scale methods and techniques. The book systematically covers the theory behind multi-particle and nanoscale systems, introduces multiple scale methods, and finally looks at contemporary applications in nano-structured and bio-inspired materials.
Book Synopsis Carbon Nanotubes and Nanosensors by : Isaac Elishakoff
Download or read book Carbon Nanotubes and Nanosensors written by Isaac Elishakoff and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main properties that make carbon nanotubes (CNTs) a promising technology for many future applications are: extremely high strength, low mass density, linear elastic behavior, almost perfect geometrical structure, and nanometer scale structure. Also, CNTs can conduct electricity better than copper and transmit heat better than diamonds. Therefore, they are bound to find a wide, and possibly revolutionary use in all fields of engineering. The interest in CNTs and their potential use in a wide range of commercial applications; such as nanoelectronics, quantum wire interconnects, field emission devices, composites, chemical sensors, biosensors, detectors, etc.; have rapidly increased in the last two decades. However, the performance of any CNT-based nanostructure is dependent on the mechanical properties of constituent CNTs. Therefore, it is crucial to know the mechanical behavior of individual CNTs such as their vibration frequencies, buckling loads, and deformations under different loadings. This title is dedicated to the vibration, buckling and impact behavior of CNTs, along with theory for carbon nanosensors, like the Bubnov-Galerkin and the Petrov-Galerkin methods, the Bresse-Timoshenko and the Donnell shell theory.
Book Synopsis Multiscaling in Molecular and Continuum Mechanics: Interaction of Time and Size from Macro to Nano by : G.C. Sih
Download or read book Multiscaling in Molecular and Continuum Mechanics: Interaction of Time and Size from Macro to Nano written by G.C. Sih and published by Springer Science & Business Media. This book was released on 2007-11-29 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time, a book is being edited to address how results from one scale can be shifted or related to another scale, say from macro to micro or vice versa. The new approach retains the use of the equilibrium mechanics within a scale level such that cross scale results can be connected by scale invariant criteria. Engineers in different disciplines should be able to understand and use the results.
Book Synopsis Handbook of Nanophysics by : Klaus D. Sattler
Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the key theories, tools, and techniques of this dynamic field, Handbook of Nanophysics: Principles and Methods elucidates the general theoretical principles and measurements of nanoscale systems. Each peer-reviewed chapter contains a broad-based introduction and enhances understanding of the state-of-the-art scientific content through fund
Book Synopsis Multiscale Modelling Methods for Applications in Materials Science by : Ivan Kondov
Download or read book Multiscale Modelling Methods for Applications in Materials Science written by Ivan Kondov and published by Forschungszentrum Jülich. This book was released on 2013 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Multiscale Modeling by : Pedro Derosa
Download or read book Multiscale Modeling written by Pedro Derosa and published by CRC Press. This book was released on 2010-12-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the relevant features and properties of nanosystems necessarily depend on nanoscopic details, their performance resides in the macroscopic world. To rationally develop and accurately predict performance of these systems we must tackle problems where multiple length and time scales are coupled. Rather than forcing a single modeling approach to
Book Synopsis Multiscale Analysis of Deformation and Failure of Materials by : Jinghong Fan
Download or read book Multiscale Analysis of Deformation and Failure of Materials written by Jinghong Fan and published by John Wiley & Sons. This book was released on 2011-06-28 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting cutting-edge research and development within multiscale modeling techniques and frameworks, Multiscale Analysis of Deformation and Failure of Materials systematically describes the background, principles and methods within this exciting new & interdisciplinary field. The author’s approach emphasizes the principles and methods of atomistic simulation and its transition to the nano and sub-micron scale of a continuum, which is technically important for nanotechnology and biotechnology. He also pays close attention to multiscale analysis across the micro/meso/macroscopy of a continuum, which has a broad scope of applications encompassing different disciplines and practices, and is an essential extension of mesomechanics. Of equal interest to engineers, scientists, academics and students, Multiscale Analysis of Deformation and Failure of Materials is a multidisciplinary text relevant to those working in the areas of materials science, solid and computational mechanics, bioengineering and biomaterials, and aerospace, automotive, civil, and environmental engineering. Provides a deep understanding of multiscale analysis and its implementation Shows in detail how multiscale models can be developed from practical problems and how to use the multiscale methods and software to carry out simulations Discusses two interlinked categories of multiscale analysis; analysis spanning from the atomistic to the micro-continuum scales, and analysis across the micro/meso/macro scale of continuum.
Book Synopsis Meshfree Methods for Partial Differential Equations II by : Michael Griebel
Download or read book Meshfree Methods for Partial Differential Equations II written by Michael Griebel and published by Springer Science & Business Media. This book was released on 2006-09-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical treatment of partial differential equations with particle methods and meshfree discretization techniques is a very active research field both in the mathematics and engineering community. Due to their independence of a mesh, particle schemes and meshfree methods can deal with large geometric changes of the domain more easily than classical discretization techniques. Furthermore, meshfree methods offer a promising approach for the coupling of particle models to continuous models. This volume of LNCSE is a collection of the papers from the proceedings of the Second International Workshop on Meshfree Methods held in September 2003 in Bonn. The articles address the different meshfree methods (SPH, PUM, GFEM, EFGM, RKPM, etc.) and their application in applied mathematics, physics and engineering. The volume is intended to foster this new and exciting area of interdisciplinary research and to present recent advances and results in this field.
Book Synopsis Particle Methods for Multi-Scale and Multi-physics by : Moubin E. T. Al LIU
Download or read book Particle Methods for Multi-Scale and Multi-physics written by Moubin E. T. Al LIU and published by World Scientific. This book was released on 2015-12-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-scale and multi-physics modeling is useful and important for all areas in engineering and sciences. Particle Methods for Multi-Scale and Multi-Physics systematically addresses some major particle methods for modeling multi-scale and multi-physical problems in engineering and sciences. It contains different particle methods from atomistic scales to continuum scales, with emphasis on molecular dynamics (MD), dissipative particle dynamics (DPD) and smoothed particle hydrodynamics (SPH). This book covers the theoretical background, numerical techniques and many interesting applications of the particle methods discussed in this text, especially in: micro-fluidics and bio-fluidics (e.g., micro drop dynamics, movement and suspension of macro-molecules, cell deformation and migration); environmental and geophysical flows (e.g., saturated and unsaturated flows in porous media and fractures); and free surface flows with possible interacting solid objects (e.g., wave impact, liquid sloshing, water entry and exit, oil spill and boom movement). The presented methodologies, techniques and example applications will benefit students, researchers and professionals in computational engineering and sciences --
Book Synopsis Nanotechnology Commercialization by : Thomas O. Mensah
Download or read book Nanotechnology Commercialization written by Thomas O. Mensah and published by John Wiley & Sons. This book was released on 2017-10-20 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fascinating and informative look at state-of-the-art nanotechnology research, worldwide, and its vast commercial potential Nanotechnology Commercialization: Manufacturing Processes and Products presents a detailed look at the state of the art in nanotechnology and explores key issues that must still be addressed in order to successfully commercialize that vital technology. Written by a team of distinguished experts in the field, it covers a range of applications notably: military, space, and commercial transport applications, as well as applications for missiles, aircraft, aerospace, and commercial transport systems. The drive to advance the frontiers of nanotechnology has become a major global initiative with profound economic, military, and environmental implications. Nanotechnology has tremendous commercial and economic implications with a projected $ 1.2 trillion-dollar global market. This book describes current research in the field and details its commercial potential—from work bench to market. Examines the state of the art in nanotechnology and explores key issues surrounding its commercialization Takes a real-world approach, with chapters written from a practical viewpoint, detailing the latest research and considering its potential commercial and defense applications Presents the current research and proposed applications of nanotechnology in such a way as to stimulate further research and development of new applications Written by an all-star team of experts, including pioneer patent-holders and award-winning researchers in nanotechnology The major challenge currently faced by researchers in nanotechnology is successfully transitioning laboratory research into viable commercial products for the 21st century. Written for professionals across an array of research and engineering disciplines, Nanotechnology Commercialization: Manufacturing Processes and Products does much to help them bridge the gap between lab and marketplace.
Book Synopsis Computational Mechanics by : Zhenhan Yao
Download or read book Computational Mechanics written by Zhenhan Yao and published by 清华大学出版社有限公司. This book was released on 2004 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Mechanical Behaviors of Carbon Nanotubes by : K.M. Liew
Download or read book Mechanical Behaviors of Carbon Nanotubes written by K.M. Liew and published by William Andrew. This book was released on 2016-12-25 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Behaviors of Carbon Nanotubes: Theoretical and Numerical Approaches presents various theoretical and numerical studies on mechanical behaviors of carbon nanotubes. The main theoretical aspects included in the book contain classical molecular dynamics simulation, atomistic-continuum theory, atomic finite element method, continuum plate, nonlocal continuum plate, and shell models. Detailed coverage is also given to structural and elastic properties, trace of large deformation, buckling and post-buckling behaviors, fracture, vibration characteristics, wave propagation, and the most promising engineering applications. This book not only illustrates the theoretical and numerical methods for analyzing the mechanical behavior of carbon nanotubes, but also contains computational results from experiments that have already taken place. - Covers various theoretical and numerical studies, giving readers a greater understanding of the mechanical behavior of carbon nanotubes - Includes multiscale methods that provide the advantages of atomistic and continuum approaches, helping readers solve complex, large-system engineering problems - Allows engineers to create more efficient carbon nanotube structures and devices
Book Synopsis Computational Methods for Solids and Fluids by : Adnan Ibrahimbegovic
Download or read book Computational Methods for Solids and Fluids written by Adnan Ibrahimbegovic and published by Springer. This book was released on 2016-02-12 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the best papers presented at the 2nd ECCOMAS International Conference on Multiscale Computations for Solids and Fluids, held June 10-12, 2015. Topics dealt with include multiscale strategy for efficient development of scientific software for large-scale computations, coupled probability-nonlinear-mechanics problems and solution methods, and modern mathematical and computational setting for multi-phase flows and fluid-structure interaction. The papers consist of contributions by six experts who taught short courses prior to the conference, along with several selected articles from other participants dealing with complementary issues, covering both solid mechanics and applied mathematics.
