Modeling and Optimal Control of Heavy-Duty Powertrains

Download Modeling and Optimal Control of Heavy-Duty Powertrains PDF Online Free

Author :
Publisher : Linköping University Electronic Press
ISBN 13 : 9176857484
Total Pages : 27 pages
Book Rating : 4.1/5 (768 download)

DOWNLOAD NOW!


Book Synopsis Modeling and Optimal Control of Heavy-Duty Powertrains by : Vaheed Nezhadali

Download or read book Modeling and Optimal Control of Heavy-Duty Powertrains written by Vaheed Nezhadali and published by Linköping University Electronic Press. This book was released on 2016-05-30 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy duty powertrains are complex systems with components from various domains, different response times during transient operations and different efficient operating ranges. To ensure efficient transient operation of a powertrain, e.g. with low fuel consumption or short transient duration, it is important to come up with proper control strategies. In this dissertation, optimal control theory is used to calculate and analyze efficient heavy duty powertrain controls during transient operations in different applications. This is enabled by first developing control ready models, usable for multi-phase optimal control problem formulations, and then using numerical optimal control methods to calculate the optimal transients. Optimal control analysis of a wheel loader operating in a repetitive loading cycle is the first studied application. Increasing fuel efficiency or reducing the operation time in such repetitive loading cycles sums up to large savings over longer periods of time. Load lifting and vehicle traction consume almost all of the power produced by a diesel engine during wheel loader operation. Physical models are developed for these subsystems where the dynamics are described by differential equations. The model parameters are tuned and fuel consumption estimation is validated against measured values from real wheel loader operation. The sensitivity of wheel loader trajectory with respect to constrains such as the angle at which the wheel loader reaches the unloading position is also analyzed. A time and fuel optimal trajectory map is calculated for various unloading positions. Moreover, the importance of simultaneous optimization of wheel loader trajectory and the component transients is shown via a side to side comparison between measured fuel consumption and trajectories versus optimal control results. In another application, optimal control is used to calculate efficient gear shift controls for a heavy duty Automatic Transmission system. A modeling and optimal control framework is developed for a nine speed automatic transmission. Solving optimal control problems using the developed model, time and jerk efficient transient for simultaneous disengagement of off-going and engagement of in-coming shift actuators are obtained and the results are analyzed. Optimal controls of a diesel-electric powertrain during a gear shift in an Automated Manual Transmission system are calculated and analyzed in another application of optimal control. The powertrain model is extended by including driveline backlash angle as an extra state in the system. This is enabled by implementation of smoothing techniques in order to describe backlash dynamics as a single continuous function during all gear shift phases. Optimal controls are also calculated for a diesel-electric powertrain corresponding to a hybrid bus during a tip-in maneuver. It is shown that for optimal control analysis of complex powertrain systems, minimizing only one property such as time pushes the system transients into extreme operating conditions far from what is achievable in real applications. Multi-objective optimal control problem formulations are suggested in order to obtain a compromise between various objectives when analyzing such complex powertrain systems.

Trajectory Planning of an Autonomous Vehicle in Multi-Vehicle Traffic Scenarios

Download Trajectory Planning of an Autonomous Vehicle in Multi-Vehicle Traffic Scenarios PDF Online Free

Author :
Publisher : Linköping University Electronic Press
ISBN 13 : 9179296939
Total Pages : 25 pages
Book Rating : 4.1/5 (792 download)

DOWNLOAD NOW!


Book Synopsis Trajectory Planning of an Autonomous Vehicle in Multi-Vehicle Traffic Scenarios by : Mahdi Morsali

Download or read book Trajectory Planning of an Autonomous Vehicle in Multi-Vehicle Traffic Scenarios written by Mahdi Morsali and published by Linköping University Electronic Press. This book was released on 2021-03-25 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous industrial and academic progress and investments have been made in au-tonomous driving, but still many aspects are unknown and require further investigation,development and testing. A key part of an autonomous driving system is an efficient plan-ning algorithm with potential to reduce accidents, or even unpleasant and stressful drivingexperience. A higher degree of automated planning also makes it possible to have a betterenergy management strategy with improved performance through analysis of surroundingenvironment of autonomous vehicles and taking action in a timely manner. This thesis deals with planning of autonomous vehicles in different urban scenarios, road,and vehicle conditions. The main concerns in designing the planning algorithms, are realtime capability, safety and comfort. The planning algorithms developed in this thesis aretested in simulation traffic situations with multiple moving vehicles as obstacles. The re-search conducted in this thesis falls mainly into two parts, the first part investigates decou-pled trajectory planning algorithms with a focus on speed planning, and the second sectionexplores different coupled planning algorithms in spatiotemporal environments where pathand speed are calculated simultaneously. Additionally, a behavioral analysis is carried outto evaluate different tactical maneuvers the autonomous vehicle can have considering theinitial states of the ego and surrounding vehicles. Particularly relevant for heavy duty vehicles, the issues addressed in designing a safe speedplanner in the first part are road conditions such as banking, friction, road curvature andvehicle characteristics. The vehicle constraints on acceleration, jerk, steering, steer ratelimitations and other safety limitations such as rollover are further considerations in speedplanning algorithms. For real time purposes, a minimum working roll model is identified us-ing roll angle and lateral acceleration data collected in a heavy duty truck. In the decoupledplanners, collision avoiding is treated using a search and optimization based planner. In an autonomous vehicle, the structure of the road network is known to the vehicle throughmapping applications. Therefore, this key property can be used in planning algorithms toincrease efficiency. The second part of the thesis, is focused on handling moving obstaclesin a spatiotemporal environment and collision-free planning in complex urban structures.Spatiotemporal planning holds the benefits of exhaustive search and has advantages com-pared to decoupled planning, but the search space in spatiotemporal planning is complex.Support vector machine is used to simplify the search problem to make it more efficient.A SVM classifies the surrounding obstacles into two categories and efficiently calculate anobstacle free region for the ego vehicle. The formulation achieved by solving SVM, con-tains information about the initial point, destination, stationary and moving obstacles.These features, combined with smoothness property of the Gaussian kernel used in SVMformulation is proven to be able to solve complex planning missions in a safe way. Here, three algorithms are developed by taking advantages of SVM formulation, a greedysearch algorithm, an A* lattice based planner and a geometrical based planner. One general property used in all three algorithms is reduced search space through using SVM. In A*lattice based planner, significant improvement in calculation time, is achieved by using theinformation from SVM formulation to calculate a heuristic for planning. Using this heuristic,the planning algorithm treats a simple driving scenario and a complex urban structureequal, as the structure of the road network is included in SVM solution. Inspired byobserving significant improvements in calculation time using SVM heuristic and combiningthe collision information from SVM surfaces and smoothness property, a geometrical planneris proposed that leads to further improvements in calculation time. Realistic driving scenarios such as roundabouts, intersections and takeover maneuvers areused, to test the performance of the proposed algorithms in simulation. Different roadconditions with large banking, low friction and high curvature, and vehicles prone to safetyissues, specially rollover, are evaluated to calculate the speed profile limits. The trajectoriesachieved by the proposed algorithms are compared to profiles calculated by optimal controlsolutions.

Optimization and Optimal Control in Automotive Systems

Download Optimization and Optimal Control in Automotive Systems PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 331905371X
Total Pages : 334 pages
Book Rating : 4.3/5 (19 download)

DOWNLOAD NOW!


Book Synopsis Optimization and Optimal Control in Automotive Systems by : Harald Waschl

Download or read book Optimization and Optimal Control in Automotive Systems written by Harald Waschl and published by Springer. This book was released on 2014-03-20 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates the use of the optimization techniques that are becoming essential to meet the increasing stringency and variety of requirements for automotive systems. It shows the reader how to move away from earlier approaches, based on some degree of heuristics, to the use of more and more common systematic methods. Even systematic methods can be developed and applied in a large number of forms so the text collects contributions from across the theory, methods and real-world automotive applications of optimization. Greater fuel economy, significant reductions in permissible emissions, new drivability requirements and the generally increasing complexity of automotive systems are among the criteria that the contributing authors set themselves to meet. In many cases multiple and often conflicting requirements give rise to multi-objective constrained optimization problems which are also considered. Some of these problems fall into the domain of the traditional multi-disciplinary optimization applied to system, sub-system or component design parameters and is performed based on system models; others require applications of optimization directly to experimental systems to determine either optimal calibration or the optimal control trajectory/control law. Optimization and Optimal Control in Automotive Systems reflects the state-of-the-art in and promotes a comprehensive approach to optimization in automotive systems by addressing its different facets, by discussing basic methods and showing practical approaches and specific applications of optimization to design and control problems for automotive systems. The book will be of interest both to academic researchers, either studying optimization or who have links with the automotive industry and to industrially-based engineers and automotive designers.

Fast Numerical Methods for Mixed-Integer Nonlinear Model-Predictive Control

Download Fast Numerical Methods for Mixed-Integer Nonlinear Model-Predictive Control PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 383488202X
Total Pages : 380 pages
Book Rating : 4.8/5 (348 download)

DOWNLOAD NOW!


Book Synopsis Fast Numerical Methods for Mixed-Integer Nonlinear Model-Predictive Control by : Christian Kirches

Download or read book Fast Numerical Methods for Mixed-Integer Nonlinear Model-Predictive Control written by Christian Kirches and published by Springer Science & Business Media. This book was released on 2011-11-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Christian Kirches develops a fast numerical algorithm of wide applicability that efficiently solves mixed-integer nonlinear optimal control problems. He uses convexification and relaxation techniques to obtain computationally tractable reformulations for which feasibility and optimality certificates can be given even after discretization and rounding.

Organic Rankine Cycle Technology for Heat Recovery

Download Organic Rankine Cycle Technology for Heat Recovery PDF Online Free

Author :
Publisher : BoD – Books on Demand
ISBN 13 : 1789843472
Total Pages : 202 pages
Book Rating : 4.7/5 (898 download)

DOWNLOAD NOW!


Book Synopsis Organic Rankine Cycle Technology for Heat Recovery by : Enhua Wang

Download or read book Organic Rankine Cycle Technology for Heat Recovery written by Enhua Wang and published by BoD – Books on Demand. This book was released on 2018-11-07 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on organic Rankine cycle technology presents nine chapters on research activities covering the wide range of current issues on the organic Rankine cycle. The first section deals with working fluid selection and component design. The second section is related to dynamic modeling, starting from internal combustion engines to industrial power plants. The third section discusses industrial applications of waste heat recovery, including internal combustion engines, LNG, and waste water. A comprehensive analysis of the technology and application of organic Rankine cycle systems is beyond the aim of the book. However, the content of this volume can be useful for scientists and students to broaden their knowledge of technologies and applications of organic Rankine cycle systems.

Advanced Microsystems for Automotive Applications 2013

Download Advanced Microsystems for Automotive Applications 2013 PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 331900476X
Total Pages : 397 pages
Book Rating : 4.3/5 (19 download)

DOWNLOAD NOW!


Book Synopsis Advanced Microsystems for Automotive Applications 2013 by : Jan Fischer-Wolfarth

Download or read book Advanced Microsystems for Automotive Applications 2013 written by Jan Fischer-Wolfarth and published by Springer Science & Business Media. This book was released on 2013-06-04 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The road vehicle of the future will embrace innovations from three major automotive technology fields: driver assistance systems, vehicle networking and alternative propulsion. Smart systems such as adaptive ICT components and MEMS devices, novel network architectures, integrated sensor systems, intelligent interfaces and functional materials form the basis of these features and permit their successful and synergetic integration. They increasingly appear to be the key enabling technologies for safe and green road mobility. For more than fifteen years the International Forum on Advanced Microsystems for Automotive Applications (AMAA) has been successful in detecting novel trends and in discussing the technological implications from early on. The topic of the AMAA 2013 will be “Smart Systems for Safe and Green Vehicles”. This book contains peer-reviewed papers written by leading engineers and researchers which all address the ongoing research and novel developments in the field. www.amaa.de

Modeling and Control of Engines and Drivelines

Download Modeling and Control of Engines and Drivelines PDF Online Free

Author :
Publisher : John Wiley & Sons
ISBN 13 : 1118479998
Total Pages : 589 pages
Book Rating : 4.1/5 (184 download)

DOWNLOAD NOW!


Book Synopsis Modeling and Control of Engines and Drivelines by : Lars Eriksson

Download or read book Modeling and Control of Engines and Drivelines written by Lars Eriksson and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems have come to play an important role in the performance of modern vehicles with regards to meeting goals on low emissions and low fuel consumption. To achieve these goals, modeling, simulation, and analysis have become standard tools for the development of control systems in the automotive industry. Modeling and Control of Engines and Drivelines provides an up-to-date treatment of the topic from a clear perspective of systems engineering and control systems, which are at the core of vehicle design. This book has three main goals. The first is to provide a thorough understanding of component models as building blocks. It has therefore been important to provide measurements from real processes, to explain the underlying physics, to describe the modeling considerations, and to validate the resulting models experimentally. Second, the authors show how the models are used in the current design of control and diagnosis systems. These system designs are never used in isolation, so the third goal is to provide a complete setting for system integration and evaluation, including complete vehicle models together with actual requirements and driving cycle analysis. Key features: Covers signals, systems, and control in modern vehicles Covers the basic dynamics of internal combustion engines and drivelines Provides a set of standard models and includes examples and case studies Covers turbo- and super-charging, and automotive dependability and diagnosis Accompanied by a web site hosting example models and problems and solutions Modeling and Control of Engines and Drivelines is a comprehensive reference for graduate students and the authors’ close collaboration with the automotive industry ensures that the knowledge and skills that practicing engineers need when analysing and developing new powertrain systems are also covered.

Modeling and Control of Hybrid Propulsion System for Ground Vehicles

Download Modeling and Control of Hybrid Propulsion System for Ground Vehicles PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3662536730
Total Pages : 328 pages
Book Rating : 4.6/5 (625 download)

DOWNLOAD NOW!


Book Synopsis Modeling and Control of Hybrid Propulsion System for Ground Vehicles by : Yuan Zou

Download or read book Modeling and Control of Hybrid Propulsion System for Ground Vehicles written by Yuan Zou and published by Springer. This book was released on 2018-07-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the systematic design of architectures, parameters and control of typical hybrid propulsion systems for wheeled and tracked vehicles based on a combination of theoretical research and engineering practice. Adopting a mechatronic system dynamics perspective, principles and methods from the fields of optimal control and system optimization are applied in order to analyze the hybrid propulsion configuration and controller design. Case investigations for typical hybrid propulsion systems of wheeled and tracked ground vehicles are also provided.

Automotive Model Predictive Control

Download Automotive Model Predictive Control PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 1849960704
Total Pages : 291 pages
Book Rating : 4.8/5 (499 download)

DOWNLOAD NOW!


Book Synopsis Automotive Model Predictive Control by : Luigi Del Re

Download or read book Automotive Model Predictive Control written by Luigi Del Re and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive control has developed over the decades from an auxiliary te- nology to a key element without which the actual performances, emission, safety and consumption targets could not be met. Accordingly, automotive control has been increasing its authority and responsibility – at the price of complexity and di?cult tuning. The progressive evolution has been mainly ledby speci?capplicationsandshorttermtargets,withthe consequencethat automotive control is to a very large extent more heuristic than systematic. Product requirements are still increasing and new challenges are coming from potentially huge markets like India and China, and against this ba- ground there is wide consensus both in the industry and academia that the current state is not satisfactory. Model-based control could be an approach to improve performance while reducing development and tuning times and possibly costs. Model predictive control is a kind of model-based control design approach which has experienced a growing success since the middle of the 1980s for “slow” complex plants, in particular of the chemical and process industry. In the last decades, severaldevelopments haveallowedusing these methods also for “fast”systemsandthis hassupporteda growinginterestinitsusealsofor automotive applications, with several promising results reported. Still there is no consensus on whether model predictive control with its high requi- ments on model quality and on computational power is a sensible choice for automotive control.

Advances in Automotive Control 2004 (2-volume Set)

Download Advances in Automotive Control 2004 (2-volume Set) PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 9780080442501
Total Pages : 774 pages
Book Rating : 4.4/5 (425 download)

DOWNLOAD NOW!


Book Synopsis Advances in Automotive Control 2004 (2-volume Set) by : G Rizzo

Download or read book Advances in Automotive Control 2004 (2-volume Set) written by G Rizzo and published by Elsevier. This book was released on 2005-11-07 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Power Transmissions

Download Power Transmissions PDF Online Free

Author :
Publisher : CRC Press
ISBN 13 : 1315386801
Total Pages : 1966 pages
Book Rating : 4.3/5 (153 download)

DOWNLOAD NOW!


Book Synopsis Power Transmissions by : Datong Qin

Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.

Vehicle Power Management

Download Vehicle Power Management PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 0857297368
Total Pages : 353 pages
Book Rating : 4.8/5 (572 download)

DOWNLOAD NOW!


Book Synopsis Vehicle Power Management by : Xi Zhang

Download or read book Vehicle Power Management written by Xi Zhang and published by Springer Science & Business Media. This book was released on 2011-08-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Power Management addresses the challenge of improving vehicle fuel economy and reducing emissions without sacrificing vehicle performance, reliability and durability. It opens with the definition, objectives, and current research issues of vehicle power management, before moving on to a detailed introduction to the modeling of vehicle devices and components involved in the vehicle power management system, which has been proven to be the most cost-effective and efficient method for initial-phase vehicle research and design. Specific vehicle power management algorithms and strategies, including the analytical approach, optimal control, intelligent system approaches and wavelet technology, are derived and analyzed for realistic applications. Vehicle Power Management also gives a detailed description of several key technologies in the design phases of hybrid electric vehicles containing battery management systems, component optimization, hardware-in-the-loop and software-in-the-loop. Vehicle Power Management provides graduate and upper level undergraduate students, engineers, and researchers in both academia and the automotive industry, with a clear understanding of the concepts, methodologies, and prospects of vehicle power management.

Optimal Control of Hybrid Vehicles

Download Optimal Control of Hybrid Vehicles PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 1447150767
Total Pages : 159 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!


Book Synopsis Optimal Control of Hybrid Vehicles by : Bram de Jager

Download or read book Optimal Control of Hybrid Vehicles written by Bram de Jager and published by Springer Science & Business Media. This book was released on 2013-04-05 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Control of Hybrid Vehicles provides a description of power train control for hybrid vehicles. The background, environmental motivation and control challenges associated with hybrid vehicles are introduced. The text includes mathematical models for all relevant components in the hybrid power train. The power split problem in hybrid power trains is formally described and several numerical solutions detailed, including dynamic programming and a novel solution for state-constrained optimal control problems based on the maximum principle. Real-time-implementable strategies that can approximate the optimal solution closely are dealt with in depth. Several approaches are discussed and compared, including a state-of-the-art strategy which is adaptive for vehicle conditions like velocity and mass. Three case studies are included in the book: • a control strategy for a micro-hybrid power train; • experimental results obtained with a real-time strategy implemented in a hybrid electric truck; and • an analysis of the optimal component sizes for a hybrid power train. Optimal Control of Hybrid Vehicles will appeal to academic researchers and graduate students interested in hybrid vehicle control or in the applications of optimal control. Practitioners working in the design of control systems for the automotive industry will also find the ideas propounded in this book of interest.

Vehicle Propulsion Systems

Download Vehicle Propulsion Systems PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 3540288538
Total Pages : 295 pages
Book Rating : 4.5/5 (42 download)

DOWNLOAD NOW!


Book Synopsis Vehicle Propulsion Systems by : Lino Guzzella

Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2005-12-01 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the longitudinal behavior of road vehicles is analyzed. The main emphasis is on the analysis and minimization of the fuel and energy consumption. Most approaches to this problem enhance the complexity of the vehicle system by adding components such as electrical motors or storage devices. Such a complex system can only be designed by means of mathematical models. This text gives an introduction to the modeling and optimization problems typically encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of classical and novel vehicle propulsion systems. Its focus lies on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms. This text has evolved from a lecture series at ETH Zurich. Prerequisites are general engineering topics and a first course in optimal control theory.

Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles

Download Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles PDF Online Free

Author :
Publisher : National Academies Press
ISBN 13 : 0309149827
Total Pages : 250 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!


Book Synopsis Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles by : National Research Council

Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-08-30 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.

Powertrain Systems for a Sustainable Future

Download Powertrain Systems for a Sustainable Future PDF Online Free

Author :
Publisher : CRC Press
ISBN 13 : 100385690X
Total Pages : 445 pages
Book Rating : 4.0/5 (38 download)

DOWNLOAD NOW!


Book Synopsis Powertrain Systems for a Sustainable Future by : Institution of Mechanical Engineers (IMechE)

Download or read book Powertrain Systems for a Sustainable Future written by Institution of Mechanical Engineers (IMechE) and published by CRC Press. This book was released on 2023-12-04 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transport sector continues to shift towards alternative powertrains, particularly with the UK Government’s focus on ending the sale of petrol and diesel passenger cars by 2030 and increasing support for alternatives. Despite this announcement, the internal combustion could continue to play a significant role both in the passenger car market through the use of hybrids and sustainable low carbon fuels including hydrogen, as well as a key role in other sectors such as heavy-duty vehicles and off-highway applications across the globe. The contributions presented at the International Conference on Powertrain Systems for a Sustainable Future 2023 (London, UK, 29- 30 November 2023) focus on the internal combustion engine’s role in net-zero transport as well as covering developments in the wide range of propulsion systems available (electric, hydrogen internal combustion engines and fuel cells, sustainable fuels etc) and their associated powertrains. To achieve a sustainable future for transport across the globe we will need to deploy all technologies and so, to help understand how these might fit together, life-cycle analysis of future powertrain systems and energy will also be included. Powertrain Systems for a Sustainable Future provides a forum for engine, fuels, e-machine, fuel cell and powertrain experts to look closely at developments in powertrain technology required to meet the demands of the net-zero future and global competition in all sectors of the road transportation, off-highway, marine and stationary power industries.

Introduction to Modeling and Control of Internal Combustion Engine Systems

Download Introduction to Modeling and Control of Internal Combustion Engine Systems PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 3662080036
Total Pages : 303 pages
Book Rating : 4.6/5 (62 download)

DOWNLOAD NOW!


Book Synopsis Introduction to Modeling and Control of Internal Combustion Engine Systems by : Lino Guzzella

Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.