Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Microstructural Aspects Of Irradiation Damage In A508 Gr 4n Forging Steel
Download Microstructural Aspects Of Irradiation Damage In A508 Gr 4n Forging Steel full books in PDF, epub, and Kindle. Read online Microstructural Aspects Of Irradiation Damage In A508 Gr 4n Forging Steel ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Microstructural Aspects of Irradiation Damage in A508 Gr 4N Forging Steel by : RJ. Stofanak
Download or read book Microstructural Aspects of Irradiation Damage in A508 Gr 4N Forging Steel written by RJ. Stofanak and published by . This book was released on 2004 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neutron irradiation can promote significant changes in the microstructure and associated mechanical properties of low alloy steels. In particular, irradiation can induce the formation of non-equilibrium phases and segregation, which may lead to a degradation in toughness. In this study, the microstructural changes caused by neutron irradiation have been characterized in A508 Grade (Gr) 4N-type steels (~3.5% Ni) using a variety of state-of-the-art analytical techniques including 3D-Atom Probe Field-Ion Microscopy and Small Angle Neutron Scattering, along with post-irradiation annealing studies combining Positron Annihilation Lineshape Analysis and hardness measurements. Important differences between conventional and "superclean" A508 Gr 4N steel have been identified in this investigation. The data indicate that Ni is not the controlling factor in the irradiation damage behavior of these materials; rather, the Mn content of the steel is a dominant factor in the irradiation-induced microstructural development of solute-related hardening features.
Book Synopsis Microstructural Aspects of Irradiation Damage in A508 Gr 4N Forging Steel by :
Download or read book Microstructural Aspects of Irradiation Damage in A508 Gr 4N Forging Steel written by and published by . This book was released on 2002 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neutron irradiation can promote significant changes in the microstructure and associated mechanical properties of low alloy steels. In particular, irradiation can induce the formation of non-equilibrium phases and segregation, which may lead to a degradation in toughness. In this study, the microstructural changes caused by neutron irradiation have been characterized in A508 Grade (Gr) 4N-type steels ((almost equal to)3.5% Ni) using a variety of state-of-the-art analytical techniques including 3D-Atom Probe Field-Ion Microscopy and Small Angle Neutron Scattering, along with post-irradiation annealing studies combining Positron Annihilation Lineshape Analysis and hardness measurements. Important differences between conventional and ''superclean'' A508 Gr 4N steel have been identified in this investigation. The data indicate that Ni is not the controlling factor in the irradiation damage behavior of these materials; rather, the Mn content of the steel is a dominant factor in the irradiation-induced microstructural development of solute-related hardening features.
Book Synopsis Effects of Radiation on Materials by : Martin L. Grossbeck
Download or read book Effects of Radiation on Materials written by Martin L. Grossbeck and published by ASTM International. This book was released on 2004 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Structural Alloys for Nuclear Energy Applications by : Robert Odette
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors’ unique personal insight from decades of frontline research, engineering and management. Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Book Synopsis Neutron Irradiation Embrittlement of Reactor Pressure Vessel Steels by : Lendell E. Steele
Download or read book Neutron Irradiation Embrittlement of Reactor Pressure Vessel Steels written by Lendell E. Steele and published by . This book was released on 1975 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INIS Atomindex written by and published by . This book was released on 1988 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety by : International Atomic Energy Agency
Download or read book Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety written by International Atomic Energy Agency and published by IAEA. This book was released on 2005 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report considers significant ageing mechanisms and degradation locations, as well as current practices for the assessment and management of the ageing of boiling water reactor (BWR) pressure vessels (RPVs). The report emphasises safety aspects and also provides information on current inspections, and monitoring and mitigation practices for managing ageing of BWR RPVs.
Book Synopsis Damage Mechanisms and Life Assessment of High Temperature Components by : Ramaswamy Viswanathan
Download or read book Damage Mechanisms and Life Assessment of High Temperature Components written by Ramaswamy Viswanathan and published by ASM International. This book was released on 1989 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Fundamentals of Radiation Materials Science by : GARY S. WAS
Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Effects of Radiation on Materials by : Arvind S. Kumar
Download or read book Effects of Radiation on Materials written by Arvind S. Kumar and published by ASTM International. This book was released on 1994 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Proceedings of the Scientific-Practical Conference "Research and Development - 2016" by : K. V. Anisimov
Download or read book Proceedings of the Scientific-Practical Conference "Research and Development - 2016" written by K. V. Anisimov and published by Springer. This book was released on 2017-12-04 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme “Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014–2020.” It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.
Book Synopsis Handbook of Engineering Practice of Materials and Corrosion by : Jung-Chul (Thomas) Eun
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Book Synopsis Duplex Stainless Steels by : Iris Alvarez-Armas
Download or read book Duplex Stainless Steels written by Iris Alvarez-Armas and published by John Wiley & Sons. This book was released on 2013-01-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Duplex Stainless Steels (DSSs) are chromium-nickel-molybdenum-iron alloys that are usually in proportions optimized for equalizing the volume fractions of austenite and ferrite. Due to their ferritic-austenitic microstructure, they possess a higher mechanical strength and a better corrosion resistance than standard austenitic steels. This type of steel is now increasing its application and market field due to its very good properties and relatively low cost. This book is a review of the most recent progress achieved in the last 10 years on microstructure, corrosion resistance and mechanical strength properties, as well as applications, due to the development of new grades. Special attention will be given to fatigue and fracture behavior and to proposed models to account for mechanical behavior. Each subject will be developed in chapters written by experts recognized around the international industrial and scientific communities. The use of duplex stainless steels has grown rapidly in the last 10 years, particularly in the oil and gas industry, chemical tankers, pulp and paper as well as the chemical industry. In all these examples, topics like welding, corrosion resistance and mechanical strength properties (mainly in the fatigue domain) are crucial. Therefore, the update of welding and corrosion properties and the introduction of topics like texture effects, fatigue and fracture strength properties, and mechanical behavior modeling give this book specific focus and character.
Book Synopsis Structural Materials for Generation IV Nuclear Reactors by : Pascal Yvon
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates Written by an expert in that particular area
Book Synopsis Materials for Nuclear Plants by : Wolfgang Hoffelner
Download or read book Materials for Nuclear Plants written by Wolfgang Hoffelner and published by Springer Science & Business Media. This book was released on 2012-09-21 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The clamor for non-carbon dioxide emitting energy production has directly impacted on the development of nuclear energy. As new nuclear plants are built, plans and designs are continually being developed to manage the range of challenging requirement and problems that nuclear plants face especially when managing the greatly increased operating temperatures, irradiation doses and extended design life spans. Materials for Nuclear Plants: From Safe Design to Residual Life Assessments provides a comprehensive treatment of the structural materials for nuclear power plants with emphasis on advanced design concepts. Materials for Nuclear Plants: From Safe Design to Residual Life Assessments approaches structural materials with a systemic approach. Important components and materials currently in use as well as those which can be considered in future designs are detailed, whilst the damage mechanisms responsible for plant ageing are discussed and explained. Methodologies for materials characterization, materials modeling and advanced materials testing will be described including design code considerations and non-destructive evaluation concepts. Including models for simple system dynamic problems and knowledge of current nuclear power plants in operation, Materials for Nuclear Plants: From Safe Design to Residual Life Assessments is ideal for students studying postgraduate courses in Nuclear Engineering. Designers on courses for code development, such as ASME or ISO and nuclear authorities will also find this a useful reference.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1986 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
