Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Measuring Frac Pack Conductivity At Reservoir Temperature And High Closure Stress
Download Measuring Frac Pack Conductivity At Reservoir Temperature And High Closure Stress full books in PDF, epub, and Kindle. Read online Measuring Frac Pack Conductivity At Reservoir Temperature And High Closure Stress ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Measuring Frac-pack Conductivity at Reservoir Temperature and High Closure Stress by : Preston X. Fernandes
Download or read book Measuring Frac-pack Conductivity at Reservoir Temperature and High Closure Stress written by Preston X. Fernandes and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-deepwater reservoirs are important non-conventional reservoirs that hold the potential to produce billions of barrels of hydrocarbons but present major challenges. Hydraulic fracturing or frac-packing high permeability reservoirs is different from the conventional hydraulic fracturing technology used in low permeability formations. While the main purpose of the conventional technique is to create a long, highly conductive path, frac-packing on the other hand is used predominantly to get past near wellbore formation damage, control sand production and reduce near wellbore pressure drop. Ultra-deepwater reservoirs are usually high temperature and high pressure with high permeabilities. Frac-packing these types of wells requires short fractures packed with high proppant concentrations. Understanding the behavior of the fracture fluid and proppant is critical to pump such a job successfully and to ensure long term productivity from the fracture. A series of laboratory experiments have been conducted to research the different problems resulting from high temperature and pressure which negatively affect conductivity. Unlike conventional long-term conductivity measurements, we placed the proppant into the fracture and pumped fracture fluid through it and then measured conductivity by pumping oil to represent true reservoir conditions. Proppant performance and fracture fluids clean-up during production were examined. High strength proppant is ideal for deep fracture stimulations and in this study different proppant loadings at different stresses were tested to measure the impact of crushing and embedment on conductivity. The preliminary test results indicated that oil at reservoir conditions does improve clean-up of fracture fluid left back in the proppant pack. Increasing the proppant concentration in the fracture showed higher conductivity values even at high closure stress. The increase in effective closure stress with high temperature yielded significant loss in conductivity values as compared to those obtained from industry tests.
Book Synopsis Hydraulic Proppant Fracturing and Gravel Packing by : D. Mader
Download or read book Hydraulic Proppant Fracturing and Gravel Packing written by D. Mader and published by Elsevier. This book was released on 1989-03-01 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many aspects of hydraulic proppant fracturing have changed since its innovation in 1947. The main significance of this book is its combination of technical and economical aspects to provide an integrated overview of the various applications of proppants in hydraulic fracturing, and gravel in sand control. The monitoring of fractures and gravel packs by well-logging and seismic techniques is also included.The book's extensive coverage of the subject should be of special interest to reservoir geologists and engineers, production engineers and technologists, and well log analysts.
Book Synopsis Journal of Petroleum Technology by :
Download or read book Journal of Petroleum Technology written by and published by . This book was released on 1988 with total page 1230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Sand Control in Well Construction and Operation by : Davorin Matanovic
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Book Synopsis Reservoir Formation Damage by : Faruk Civan
Download or read book Reservoir Formation Damage written by Faruk Civan and published by Elsevier. This book was released on 2011-08-30 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Formation Damage, Second edition is a comprehensive treatise of the theory and modeling of common formation damage problems and is an important guide for research and development, laboratory testing for diagnosis and effective treatment, and tailor-fit- design of optimal strategies for mitigation of reservoir formation damage. The new edition includes field case histories and simulated scenarios demonstrating the consequences of formation damage in petroleum reservoirsFaruk Civan, Ph.D., is an Alumni Chair Professor in the Mewbourne School of Petroleum and Geological Engineering at the University of Oklahoma in Norman. Dr. Civan has received numerous honors and awards, including five distinguished lectureship awards and the 2003 SPE Distinguished Achievement Award for Petroleum Engineering Faculty. - Petroleum engineers and managers get critical material on evaluation, prevention, and remediation of formation damage which can save or cost millions in profits from a mechanistic point of view - State-of-the-Art knowledge and valuable insights into the nature of processes and operational practices causing formation damage - Provides new strategies designed to minimize the impact of and avoid formation damage in petroleum reservoirs with the newest drilling, monitoring, and detection techniques
Download or read book SPE Production and Facilities written by and published by . This book was released on 2000 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fossil Energy Update written by and published by . This book was released on 1986 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Lost Circulation and Wellbore Strengthening by : Yongcun Feng
Download or read book Lost Circulation and Wellbore Strengthening written by Yongcun Feng and published by Springer. This book was released on 2018-05-01 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the underlying mechanisms of lost circulation and wellbore strengthening, presenting a comprehensive, yet concise, overview of the fundamental studies on lost circulation and wellbore strengthening in the oil and gas industry, as well as a detailed discussion on the limitations of the wellbore strengthening methods currently used in industry. It provides several advanced analytical and numerical models for lost circulation and wellbore strengthening simulations under realistic conditions, as well as their results to illustrate the capabilities of the models and to investigate the influences of key parameters. In addition, experimental results are provided for a better understanding of the subject. The book provides useful information for drilling and completion engineers wishing to solve the problem of lost circulation using wellbore strengthening techniques. It is also a valuable resource for industrial researchers and graduate students pursuing fundamental research on lost circulation and wellbore strengthening, and can be used as a supplementary reference for college courses, such as drilling and completion engineering and petroleum geomechanics.
Book Synopsis Well Completion Design by : Jonathan Bellarby
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Book Synopsis Hydraulic Fracture Modeling by : Yu-Shu Wu
Download or read book Hydraulic Fracture Modeling written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2017-11-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracture Modeling delivers all the pertinent technology and solutions in one product to become the go-to source for petroleum and reservoir engineers. Providing tools and approaches, this multi-contributed reference presents current and upcoming developments for modeling rock fracturing including their limitations and problem-solving applications. Fractures are common in oil and gas reservoir formations, and with the ongoing increase in development of unconventional reservoirs, more petroleum engineers today need to know the latest technology surrounding hydraulic fracturing technology such as fracture rock modeling. There is tremendous research in the area but not all located in one place. Covering two types of modeling technologies, various effective fracturing approaches and model applications for fracturing, the book equips today's petroleum engineer with an all-inclusive product to characterize and optimize today's more complex reservoirs. - Offers understanding of the details surrounding fracturing and fracture modeling technology, including theories and quantitative methods - Provides academic and practical perspective from multiple contributors at the forefront of hydraulic fracturing and rock mechanics - Provides today's petroleum engineer with model validation tools backed by real-world case studies
Download or read book Oilfield Review written by and published by . This book was released on 2005 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Hydraulic Fracturing in Unconventional Reservoirs by : Hoss Belyadi
Download or read book Hydraulic Fracturing in Unconventional Reservoirs written by Hoss Belyadi and published by Gulf Professional Publishing. This book was released on 2019-06-18 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing in Unconventional Reservoirs: Theories, Operations, and Economic Analysis, Second Edition, presents the latest operations and applications in all facets of fracturing. Enhanced to include today's newest technologies, such as machine learning and the monitoring of field performance using pressure and rate transient analysis, this reference gives engineers the full spectrum of information needed to run unconventional field developments. Covering key aspects, including fracture clean-up, expanded material on refracturing, and a discussion on economic analysis in unconventional reservoirs, this book keeps today's petroleum engineers updated on the critical aspects of unconventional activity. - Helps readers understand drilling and production technology and operations in shale gas through real-field examples - Covers various topics on fractured wells and the exploitation of unconventional hydrocarbons in one complete reference - Presents the latest operations and applications in all facets of fracturing
Download or read book SPE Drilling & Completion written by and published by . This book was released on 2005 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Petroleum Production Engineering, A Computer-Assisted Approach by : Boyun Guo
Download or read book Petroleum Production Engineering, A Computer-Assisted Approach written by Boyun Guo and published by Elsevier. This book was released on 2011-04-01 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Production Engineering, A Computer-Assisted Approach provides handy guidelines to designing, analyzing and optimizing petroleum production systems. Broken into four parts, this book covers the full scope of petroleum production engineering, featuring stepwise calculations and computer-based spreadsheet programs. Part one contains discussions of petroleum production engineering fundamentals, empirical models for production decline analysis, and the performance of oil and natural gas wells. Part two presents principles of designing and selecting the main components of petroleum production systems including: well tubing, separation and dehydration systems, liquid pumps, gas compressors, and pipelines for oil and gas transportation. Part three introduces artificial lift methods, including sucker rod pumping systems, gas lift technology, electrical submersible pumps and other artificial lift systems. Part four is comprised of production enhancement techniques including, identifying well problems, designing acidizing jobs, guidelines to hydraulic fracturing and job evaluation techniques, and production optimization techniques. Provides complete coverage of the latest techniques used for designing and analyzing petroleum production systems Increases efficiency and addresses common problems by utilizing the computer-based solutions discussed within the book Presents principles of designing and selecting the main components of petroleum production systems
Book Synopsis Stratigraphy and Sedimentation by : William Christian Krumbein
Download or read book Stratigraphy and Sedimentation written by William Christian Krumbein and published by W.H. Freeman. This book was released on 1963 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :Society of Petroleum Engineers (U.S.). Technical Conference and Exhibition Publisher : ISBN 13 : Total Pages :828 pages Book Rating :4.F/5 ( download)
Book Synopsis Proceedings ... SPE Annual Technical Conference and Exhibition by : Society of Petroleum Engineers (U.S.). Technical Conference and Exhibition
Download or read book Proceedings ... SPE Annual Technical Conference and Exhibition written by Society of Petroleum Engineers (U.S.). Technical Conference and Exhibition and published by . This book was released on 1997 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SPE Production & Operations written by and published by . This book was released on 2009 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
