Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Laser Material Processing
Download Laser Material Processing full books in PDF, epub, and Kindle. Read online Laser Material Processing ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Laser Material Processing by : William M. Steen
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)
Book Synopsis The Theory of Laser Materials Processing by : John Dowden
Download or read book The Theory of Laser Materials Processing written by John Dowden and published by Springer. This book was released on 2017-06-16 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this important reference volume presents an expanded overview of the analytical and numerical approaches employed when exploring and developing modern laser materials processing techniques. The book shows how general principles can be used to obtain insight into laser processes, whether derived from fundamental physical theory or from direct observation of experimental results. The book gives readers an understanding of the strengths and limitations of simple numerical and analytical models that can then be used as the starting-point for more elaborate models of specific practical, theoretical or commercial value. Following an introduction to the mathematical formulation of some relevant classes of physical ideas, the core of the book consists of chapters addressing key applications in detail: cutting, keyhole welding, drilling, arc and hybrid laser-arc welding, hardening, cladding and forming. The second edition includes a new a chapter on glass cutting with lasers, as employed in the display industry. A further addition is a chapter on meta-modelling, whose purpose is to construct fast, simple and reliable models based on appropriate sources of information. It then makes it easy to explore data visually and is a convenient interactive tool for scientists to improve the quality of their models and for developers when designing their processes. As in the first edition, the book ends with an updated introduction to comprehensive numerical simulation. Although the book focuses on laser interactions with materials, many of the principles and methods explored can be applied to thermal modelling in a variety of different fields and at different power levels. It is aimed principally however at academic and industrial researchers and developers in the field of laser technology.
Book Synopsis Principles of Laser Materials Processing by : Elijah Kannatey-Asibu, Jr.
Download or read book Principles of Laser Materials Processing written by Elijah Kannatey-Asibu, Jr. and published by John Wiley & Sons. This book was released on 2009-04-22 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coverage of the most recent advancements and applications in laser materials processing This book provides state-of-the-art coverage of the field of laser materials processing, from fundamentals to applications to the latest research topics. The content is divided into three succinct parts: Principles of laser engineering-an introduction to the basic concepts and characteristics of lasers, design of their components, and beam delivery Engineering background&-a review of engineering concepts needed to analyze different processes: thermal analysis and fluid flow; solidification of molten metal; and residual stresses that evolve during processes Laser materials processing-a rigorous and detailed treatment of laser materials processing and its principle applications, including laser cutting and drilling, welding, surface modification, laser forming, and rapid prototyping Each chapter includes an outline, summary, and example sets to help readers reinforce their understanding of the material. This book is designed to prepare graduate students who will be entering industry; researchers interested in initiating a research program; and practicing engineers who need to stay abreast of the latest developments in this rapidly evolving field.
Book Synopsis Laser Processing of Materials by : Peter Schaaf
Download or read book Laser Processing of Materials written by Peter Schaaf and published by Springer Science & Business Media. This book was released on 2010-07-28 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser materials processing has made tremendous progress and is now at the forefront of industrial and medical applications. The book describes recent advances in smart and nanoscaled materials going well beyond the traditional cutting and welding applications. As no analytical methods are described the examples are really going into the details of what nowadways is possible by employing lasers for sophisticated materials processing giving rise to achievements not possible by conventional materials processing.
Book Synopsis Advances in Laser Materials Processing by : J. R. Lawrence
Download or read book Advances in Laser Materials Processing written by J. R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing Provides revised, expanded and updated coverage
Book Synopsis Laser Processing of Engineering Materials by : John Ion
Download or read book Laser Processing of Engineering Materials written by John Ion and published by Elsevier. This book was released on 2005-03-22 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete guide to understanding and using lasers in material processing! Lasers are now an integral part of modern society, providing extraordinary opportunities for innovation in an ever-widening range of material processing and manufacturing applications. The study of laser material processing is a core element of many materials and manufacturing courses at undergraduate and postgraduate level. As a consequence, there is now a vast amount of research on the theory and application of lasers to be absorbed by students, industrial researchers, practising engineers and production managers. Written by an acknowledged expert in the field with over twenty years' experience in laser processing, John Ion distils cutting-edge information and research into a single key text. Essential for anyone studying or working with lasers, Laser Processing of Engineering Materials provides a clear explanation of the underlying principles, including physics, chemistry and materials science, along with a framework of available laser processes and their distinguishing features and variables. This book delivers the knowledge needed to understand and apply lasers to the processing of engineering materials, and is highly recommended as a valuable guide to this revolutionary manufacturing technology. The first single volume text that treats this core engineering subject in a systematic manner Covers the principles, practice and application of lasers in all contemporary industrial processes; packed with examples, materials data and analysis, and modelling techniques
Book Synopsis Physics of Laser Materials Processing by : Gennady G. Gladush
Download or read book Physics of Laser Materials Processing written by Gennady G. Gladush and published by Springer Science & Business Media. This book was released on 2011-08-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the basic mechanisms, theory, simulations and technological aspects of Laser processing techniques. It covers the principles of laser quenching, welding, cutting, alloying, selective sintering, ablation, etc. The main attention is paid to the quantitative description. The diversity and complexity of technological and physical processes is discussed using a unitary approach. The book aims on understanding the cause-and-effect relations in physical processes in Laser technologies. It will help researchers and engineers to improve the existing and develop new Laser machining techniques. The book addresses readers with a certain background in general physics and mathematical analysis: graduate students, researchers and engineers practicing laser applications.
Book Synopsis Laser Processing and Analysis of Materials by : Walter W. Duley
Download or read book Laser Processing and Analysis of Materials written by Walter W. Duley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has often been said that the laser is a solution searching for a problem. The rapid development of laser technology over the past dozen years has led to the availability of reliable, industrially rated laser sources with a wide variety of output characteristics. This, in turn, has resulted in new laser applications as the laser becomes a familiar processing and analytical tool. The field of materials science, in particular, has become a fertile one for new laser applications. Laser annealing, alloying, cladding, and heat treating were all but unknown 10 years ago. Today, each is a separate, dynamic field of research activity with many of the early laboratory experiments resulting in the development of new industrial processing techniques using laser technology. Ten years ago, chemical processing was in its infancy awaiting, primarily, the development of reliable tunable laser sources. Now, with tunability over the entire spectrum from the vacuum ultraviolet to the far infrared, photo chemistry is undergoing revolutionary changes with several proven and many promising commercial laser processing operations as the result. The ability of laser sources to project a probing beam of light into remote or hostile environments has led to the development of a wide variety of new analytical techniques in environmental and laboratory analysis. Many of these are reviewed in this book.
Book Synopsis Laser Materials Processing by : Leonard R. Migliore
Download or read book Laser Materials Processing written by Leonard R. Migliore and published by CRC Press. This book was released on 1996-04-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the basic principles necessary to understand lasers, explains laser interactions with materials, and surveys the wide variety of industrial applications of the major laser types, covering in detail the operating mechanisms of carbon dioxide, Nd:YAG, and excimer lasers. It presents lasers as manufacturing tools rather than laboratory devices.
Book Synopsis Advanced Manufacturing Techniques Using Laser Material Processing by : Akinlabi, Esther Titilayo
Download or read book Advanced Manufacturing Techniques Using Laser Material Processing written by Akinlabi, Esther Titilayo and published by IGI Global. This book was released on 2016-04-14 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lasers in material processing has become a useful method for transforming industrial materials into finished products. The benefits of laser material processing are vast, including increased precision, high processing speed, and dustless cutting and drilling. Advanced Manufacturing Techniques Using Laser Material Processing explores the latest methodologies for using lasers in materials manufacturing and production, the benefits of using lasers in industrial settings, as well as future outlooks for this technology. This innovative publication is an essential reference source for professionals, researchers, and graduate-level students studying manufacturing technologies and industrial engineering.
Book Synopsis Laser Fabrication and Machining of Materials by : Narendra B. Dahotre
Download or read book Laser Fabrication and Machining of Materials written by Narendra B. Dahotre and published by Springer Science & Business Media. This book was released on 2008-01-25 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental principles and physical phenomena behind laser-based fabrication and machining processes. It also gives an overview of their existing and potential applications. With laser machining an emerging area in various applications ranging from bulk machining in metal forming to micromachining and microstructuring, this book provides a link between advanced materials and advanced manufacturing techniques. The interdisciplinary approach of this text will help prepare students and researchers for the next generation of manufacturing.
Book Synopsis LIA Handbook of Laser Materials Processing by : D.F. Farson
Download or read book LIA Handbook of Laser Materials Processing written by D.F. Farson and published by Springer. This book was released on 2001-07-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the Laser Institute of America, The LIA Handbook of Laser Materials Processing is a working reference source designed to help solve problems by providing extensive data on procedures, processes, equipment, processing systems and processing results.
Book Synopsis Laser and Electron Beam Processing of Materials by : C.W. White
Download or read book Laser and Electron Beam Processing of Materials written by C.W. White and published by Elsevier. This book was released on 2012-12-02 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser and Electron Beam Processing of Materials contains the papers presented at the symposium on "Laser and Electron Beam Processing of Materials," held in Cambridge, Massachusetts, in November 1979, sponsored by the Materials Research Society. The compilation presents reports and research papers on the use of directed energy sources, such as lasers and electron beams for materials processing. The majority of the materials presented emphasize results on semiconductor materials research. Substantial findings on research on metals, alloys, and other materials are presented as well. Topics covered by the papers include the use of scanned cw sources (both photons and electrons) to recrystallize amorphous layers, enhanced substitutional solubility, solute trapping, zone refining of impurities, and constitutional supercooling. The use of lasers and electron beams to anneal ion implant damage and contacts formation, processing of ion-implanted metals, and surface alloying of films deposited on metallic surfaces are also discussed. Metallurgists, engineers, and materials scientists will find the book very insightful.
Book Synopsis Laser Material Processing by : William M. Steen
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2010-11-30 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The informal style of Laser Material Processing (4th Edition) will guide you smoothly from the basics of laser physics to the detailed treatment of all the major materials processing techniques for which lasers are now essential. • Helps you to understand how the laser works and to decide which laser is best for your purposes. • New chapters on laser physics, drilling, micro- and nanomanufacturing and biomedical laser processing reflect the changes in the field since the last edition, updating and completing the range of practical knowledge about the processes possible with lasers already familiar to established users of this well-known text. • Provides a firm grounding in the safety aspects of laser use. • Now with end-of-chapter exercises to help students assimilate information as they learn. • The authors’ lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford which will bring a smile to your face and ease the learning process.
Book Synopsis Laser Processing and Chemistry by : Dieter Bäuerle
Download or read book Laser Processing and Chemistry written by Dieter Bäuerle and published by Springer Science & Business Media. This book was released on 2011-09-02 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Processing and Chemistry gives an overview of the fundamentals and applications of laser-matter interactions, in particular with regard to laser material processing. Special attention is given to laser-induced physical and chemical processes at gas-solid, liquid-solid, and solid-solid interfaces. Starting with the background physics, the book proceeds to examine applications of laser techniques in micro-machining, and the patterning, coating, and modification of material surfaces. This fourth edition has been revised and enlarged to cover new topics such as 3D microfabrication, advances in nanotechnology, ultrafast laser technology and laser chemical processing (LCP). Graduate students, physicists, chemists, engineers, and manufacturers alike will find this book an invaluable reference work on laser processing.
Book Synopsis Ultrafast Laser Processing by : Koji Sugioka
Download or read book Ultrafast Laser Processing written by Koji Sugioka and published by CRC Press. This book was released on 2013-06-24 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, the rapid development of ultrafast lasers, such as femtosecond lasers and picosecond lasers, has opened up new avenues for material processing due to their unique features such as ultrashort pulse width and extremely high peak intensity. These techniques have become a common tool for micro- and nanoprocessing of a variety of materials and are now widely used for both fundamental researches and practical applications. This book is composed of 12 chapters covering relevant topics of ultrafast laser processing, including laser itself and novel beam manipulation methods for processing, fundamentals of ultrafast laser processing, nanomaterial synthesis, surface micro- and nanostructuring, micromachining, two-photon photopolymerization, internal modification/fabrication of transparent materials, applications to photonic devices and microchips for biological analysis, industrial applications, and so on. Each chapter is written by world-leading scientists in the related field so as to give comprehensive reviews in the field of ultrafast laser micro- and nanoprocessing.
Book Synopsis Laser Precision Microfabrication by : Koji Sugioka
Download or read book Laser Precision Microfabrication written by Koji Sugioka and published by Springer. This book was released on 2010-08-13 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miniaturization and high precision are rapidly becoming a requirement for many industrial processes and products. As a result, there is greater interest in the use of laser microfabrication technology to achieve these goals. This book composed of 16 chapters covers all the topics of laser precision processing from fundamental aspects to industrial applications to both inorganic and biological materials. It reviews the sate of the art of research and technological development in the area of laser processing.
