Investigation Of Coal Ash Deposition Under Staged Combustion In A Pilot Scale Facility

Author : Yuanyuan Shao
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (16 download)

DOWNLOAD NOW!

Download or read book Investigation of Ash Deposition During Co-firing Biomass/peat with Coal in a Pilot-scale Fluidized-bed Reactor written by Yuanyuan Shao and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass, a promising alternative to fossil fuels, has been applied widely for energy generation by co-firing technology in recent year particularly in the EU countries. In this thesis, a key issue of biomass co-firing technology - ash deposition in combustion, co-combustion and gasification, was comprehensively investigated in a pilot-scale bubbling fluidized bed reactor. A custom-designed, air-cooled probe was installed in the freeboard zone of the reactor to simulate the heat-transfer surface and collect ash deposits from the process. A local lignite coal, a woody biomass (white pine), and a Canadian peat were involved in the tests. The main varying operating parameters investigated in this study included: blending ratio, air/fuel ratio, moisture content and sulphur addition for the combustion/combustion tests; equivalence ratio, bed materials and fuel types for the gasification tests. A new parameter, "relative deposition rate" (RDA) was proposed in this study to evaluate the relative deposition tendencies of biomass fuels and biomass-coal mixed fuels against the coal as the base fuel for co-firing. As expected, co-firing of the lignite and the wood pellets (with a much lower ash-content than the lignite) resulted in a decreased superficial rate of ash deposition. However, co-firing of woody biomass and lignite coal did not significantly increase the ash deposition tendency in terms of the values of RDA, and more interestingly, co-firing of the fuel blend of 50% lignite-50% white pine pellets produced a lower RDA. Co-combustion of three-fuel blend at 20%lignite-40%peat-40%pine resulted in the lowest deposition rate and the least deposition tendency among all the combustion tests with various mixed fuels or individual fuels. Another new and interesting discovery of this study was that fluidized-bed combustion of an individual fuel or a fuel blend with a higher moisture content produced not only a more uniform temperature profile along the fluidized-bed column but also a reduced ash deposition rate. A higher chlorine concentration in the feed would generally result in a higher tendency of ash deposition. Adding sulfur into the fuel of coal or peat could effectively decrease the chloride deposition in the ash deposits via sulphation. The sulphur addition could also reduce the ash deposition rate for the combustion of lignite, while it slightly increased the ash deposition rate for the peat fuel. In air-blown gasification of a woody biomass and a Canadian peat, the experimental results demonstrated that among the four bed materials (olivine, limestone, iron ore, and dolomite), the use of olivine resulted in the lowest ash deposition rate. The superb performance of olivine in retarding ash deposition could be accounted for by its outstanding thermal stability and mechanical strength. The other three bed materials, in particular limestone, were fragile during the fluidized bed gasification, and the fractured fines from the bed materials were found to deposit along with the fuel-ash on the heat transfer surface, leading to higher ash deposition rates. Finally, mathematical models parameterized with interactions between fuel chlorine, alkali and ash particles were developed to analyze the ash and chlorine deposition behavior based on the experimental data from co-firing peat with lignite coal. The developed equations in this study can not only describe the dependence of the deposition rate and the ash chlorine content on the fraction of peat, but can also determine suitable range of the peat fraction for smooth operations, which would be useful for co-firing other fuel blends.