Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Integrated Modeling Of Reservoir Fluid Properties And Multiphase Flow In Offshore Production Systems
Download Integrated Modeling Of Reservoir Fluid Properties And Multiphase Flow In Offshore Production Systems full books in PDF, epub, and Kindle. Read online Integrated Modeling Of Reservoir Fluid Properties And Multiphase Flow In Offshore Production Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Integrated Modeling of Reservoir Fluid Properties and Multiphase Flow in Offshore Production Systems by : Tobias R. Gessner
Download or read book Integrated Modeling of Reservoir Fluid Properties and Multiphase Flow in Offshore Production Systems written by Tobias R. Gessner and published by Springer Nature. This book was released on 2023-11-04 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is intended for practicing engineers in the oil industry, researchers, and graduate students interested in designing and simulating offshore hydrocarbon production systems. It approaches offshore oil production systems from an integrated perspective that combines the modeling of thermophysical properties of reservoir fluids and their flow as a multiphase mixture in wellbores, flow lines, and risers. The first part of the book presents an internally consistent method to compute the critical parameters and acentric factor of Single Carbon Number (SCN) fractions of petroleum mixtures using state-of-the-art multivariate fitting techniques. The procedure is illustrated and validated using flash and differential liberation data from actual field samples. In the second part of the book, mechanistic multiphase flow models are discussed in light of their ability to predict the pressure, temperature, and phase holdup of production fluids in wellbores, flow lines, and risers. Multivariate fitting procedures are again applied to evaluate the sensitivity of the results with respect to closure relationship parameters, such as slug body gas holdup, wall shear stress, and wall roughness in pipelines and production tubing. Finally, the modeling framework is validated using actual field data from offshore production wells.
Book Synopsis Multiphase Transport of Hydrocarbons in Pipes by : Juan J. Manzano-Ruiz
Download or read book Multiphase Transport of Hydrocarbons in Pipes written by Juan J. Manzano-Ruiz and published by John Wiley & Sons. This book was released on 2024-03-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Transport of Hydrocarbons in Pipes An introduction to multiphase flows in the oil and gas industry The term ‘multiphase flow’ refers to the concurrent flow of oil and/or gas, alongside other substances or materials such as production water, chemical inhibitors, and solids (e.g. sand). This is a critical topic in the oil and gas industry, where the presence of multiple flow phases in pipelines affects deliverability, generates serious complications in predicting flow performance for system design and operation, and requires specific risk mitigation actions and continuous maintenance. Chemical and Mechanical Engineers interested in working in this industry will benefit from understanding the basic theories and practices required to model and operate multiphase flows through pipelines, wells, and other components of the production system. Multiphase Transport of Hydrocarbons in Pipes meets this need with a comprehensive overview of five decades of research into multiphase flow. Incorporating fundamental theories, historic and cutting-edge multiphase flow models, and concrete examples of current and future applications. This book provides a sound technical background for prospective or working engineers in need of understanding this crucial area of industry. Readers will also find: Fundamental principles supporting commercial software Detailed tools for estimating multiphase flow rates through flowlines, wells, and more Integration of conservation principles with thermodynamic and transport properties Coverage of legacy and modern simulation models This book is ideal for flow assurance engineers, facilities engineers, oil and gas production engineers, and process engineers, as well as chemical and mechanical engineering students looking to work in any of these roles.
Book Synopsis An Introduction to Reservoir Simulation Using MATLAB/GNU Octave by : Knut-Andreas Lie
Download or read book An Introduction to Reservoir Simulation Using MATLAB/GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Book Synopsis An Introduction to Multiphase, Multicomponent Reservoir Simulation by : Matthew Balhoff
Download or read book An Introduction to Multiphase, Multicomponent Reservoir Simulation written by Matthew Balhoff and published by Elsevier. This book was released on 2022-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Petroleum Reservoir Simulation is aimed toward graduate students and professionals in the oil and gas industry working in reservoir simulation. It begins with a review of fluid and rock properties and derivation of basic reservoir engineering mass balance equations. Then equations and approaches for numerical reservoir simulation are introduced. The text starts with simple problems (1D, single phase flow in homogeneous reservoirs with constant rate wells) and subsequent chapters slowly add complexities (heterogeneities, nonlinearities, multi-dimensions, multiphase flow, and multicomponent flow). Partial differential equations and finite differences are then introduced but it will be shown that algebraic mass balances can also be written directly on discrete grid blocks that result in the same equations. Many completed examples and figures will be included to improve understanding. An Introduction to Petroleum Reservoir Simulation is designed for those with their first exposure to reservoir simulation, including graduate students in their first simulation course and working professionals who are using reservoir simulators and want to learn more about the basics. Presents basic equations and discretization for multiphase, multicomponent transport in subsurface media in a simple, easy-to-understand manner Features illustrations that explain basic concepts and show comparison to analytical solutions and commercial simulators Includes dozens of completed example problems on a small number of grid blocks Offers pseudocode and exercises to allow the reader to develop their own computer-based numerical simulator that can be verified against analytical solutions and commercial simulators
Book Synopsis Multiphase Fluid Flow in Porous and Fractured Reservoirs by : Yu-Shu Wu
Download or read book Multiphase Fluid Flow in Porous and Fractured Reservoirs written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2015-09-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Fluid Flow in Porous and Fractured Reservoirs discusses the process of modeling fluid flow in petroleum and natural gas reservoirs, a practice that has become increasingly complex thanks to multiple fractures in horizontal drilling and the discovery of more unconventional reservoirs and resources. The book updates the reservoir engineer of today with the latest developments in reservoir simulation by combining a powerhouse of theory, analytical, and numerical methods to create stronger verification and validation modeling methods, ultimately improving recovery in stagnant and complex reservoirs. Going beyond the standard topics in past literature, coverage includes well treatment, Non-Newtonian fluids and rheological models, multiphase fluid coupled with geomechanics in reservoirs, and modeling applications for unconventional petroleum resources. The book equips today’s reservoir engineer and modeler with the most relevant tools and knowledge to establish and solidify stronger oil and gas recovery. Delivers updates on recent developments in reservoir simulation such as modeling approaches for multiphase flow simulation of fractured media and unconventional reservoirs Explains analytical solutions and approaches as well as applications to modeling verification for today’s reservoir problems, such as evaluating saturation and pressure profiles and recovery factors or displacement efficiency Utilize practical codes and programs featured from online companion website
Book Synopsis Computational Methods for Multiphase Flows in Porous Media by : Zhangxin Chen
Download or read book Computational Methods for Multiphase Flows in Porous Media written by Zhangxin Chen and published by SIAM. This book was released on 2006-01-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Multiphase Flows in Porous Media offers a fundamental and practical introduction to the use of computational methods, particularly finite element methods, in the simulation of fluid flows in porous media. It is the first book to cover a wide variety of flows, including single-phase, two-phase, black oil, volatile, compositional, nonisothermal, and chemical compositional flows in both ordinary porous and fractured porous media. In addition, a range of computational methods are used, and benchmark problems of nine comparative solution projects organized by the Society of Petroleum Engineers are presented for the first time in book form. The book reviews multiphase flow equations and computational methods to introduce basic terminologies and notation. A thorough discussion of practical aspects of the subjects is presented in a consistent manner, and the level of treatment is rigorous without being unnecessarily abstract. Audience: this book can be used as a textbook for graduate or advanced undergraduate students in geology, petroleum engineering, and applied mathematics; as a reference book for professionals in these fields, as well as scientists working in the area of petroleum reservoir simulation; as a handbook for employees in the oil industry who need a basic understanding of modeling and computational method concepts; and by researchers in hydrology, environmental remediation, and some areas of biological tissue modeling. Calculus, physics, and some acquaintance with partial differential equations and simple matrix algebra are necessary prerequisites.
Book Synopsis Unsteady-state Fluid Flow by : E.J. Hoffman
Download or read book Unsteady-state Fluid Flow written by E.J. Hoffman and published by Elsevier. This book was released on 1999-07-02 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ubiquitous examples of unsteady-state fluid flow pertain to the production or depletion of oil and gas reservoirs. After introductory information about petroleum-bearing formations and fields, reservoirs, and geologic codes, empirical methods for correlating and predicting unsteady-state behavior are presented. This is followed by a more theoretical presentation based on the classical partial differential equations for flow through porous media.Whereas these equations can be simplified for the flow of (compressible) fluids, and idealized solutions exist in terms of Fourier series for linear flow and Bessel functions for radial flow, the flow of compressible gases requires computer solutions, read approximations. An analysis of computer solutions indicates, fortuitously, that the unsteady-state behavior can be reproduced by steady-state density or pressure profiles at successive times. This will demark draw down and the transition to long-term depletion for reservoirs with closed outer boundaries.As an alternative, unsteady-state flow may be presented in terms of volume and surface integrals, and the methodology is fully developed with examples furnished. Among other things, permeability and reserves can be estimated from well flow tests.The foregoing leads to an examination of boundary conditions and degrees of freedom and raises arguments that the classical partial differential equations of mathematical physics may not be allowable representations. For so-called open petroleum reservoirs where say water-drive exists, the simplifications based on successive steady-state profiles provide a useful means of representation, which is detailed in the form of material balances. Unsteady-State Fluid Flow provides:• empirical and classical methods for correlating and predicting the unsteady-state behavior of petroleum reservoirs• analysis of unsteady-state behavior, both in terms of the classical partial differential equations, and in terms of volume and surface integrals• simplifications based on successive steady-state profiles which permit application to the depletion of both closed reservoirs and open reservoirs, and serves to distinguish drawdown, transition and long-term depletion performance.
Book Synopsis Multiphase Flow in Porous Media by : Myron B. III Allen
Download or read book Multiphase Flow in Porous Media written by Myron B. III Allen and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past decade has seen remarkable growth in research related to petroleum reseIVoir simulation. This growth reflects several developments, not the least of which is the increased interest in oil recovery technologies requiring sophisticated engineer ing. Augmenting this interest has been the broader availability of supercomputers capable of handling the tremendous computational demands of a typical reseIVoir simulator. The field of reseIVoir simulation incorporates several major facets of applied mathematics. First, in view of the varieyt and complexity of the processes encoun tered, it is imperative that the modeler adopt a systematic approach to establishing the equations governing reseIVoir flows. Second, the mathematical structure of these flow equations needs to be carefully analyzed in order to develop appropriate and efficient numerical methods for their solution. Third, since some aspects of the discretized flow equations are typically stiff, one must develop efficient schemes for solving large sparse systems of linear equations. This monograph has three parts, each devoted to one of these three aspects of reseIVoir modeling. The text grew out of a set of lectures presented by the authors in the autumn of 1986 at the IBM Scientific Center in Bergen, Norway. We feel that it is only appropriate to caution the reader that many of the ideas that we present in this monograph do not reflect standard approaches in petroleum reseIVoir simulation. In fact, our aim is to outline promising new ways of attacking reseIVoir simulation prob lems, rather than to compile another textbook for the mainstream.
Book Synopsis Multiphase Equilibria of Complex Reservoir Fluids by : Huazhou Li
Download or read book Multiphase Equilibria of Complex Reservoir Fluids written by Huazhou Li and published by Springer Nature. This book was released on 2021-10-30 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short monograph focuses on the theoretical backgrounds and practical implementations concerning the thermodynamic modeling of multiphase equilibria of complex reservoir fluids using cubic equations of state. It aims to address the increasing needs of multiphase equilibrium calculations that arise in the compositional modeling of multiphase flow in reservoirs and wellbores. It provides a state-of-the-art coverage on the recent improvements of cubic equations of state. Considering that stability test and flash calculation are two basic tasks involved in any multiphase equilibrium calculations, it elaborates on the rigorous mathematical frameworks dedicated to stability test and flash calculation. A special treatment is given to the new algorithms that are recently developed to perform robust and efficient three-phase equilibrium calculations. This monograph will be of value to graduate students who conduct research in the field of phase behavior, as well as software engineers who work on the development of multiphase equilibrium calculation algorithms.
Book Synopsis Multiphase Production by : Jean Falcimaigne
Download or read book Multiphase Production written by Jean Falcimaigne and published by Editions OPHRYS. This book was released on 2008 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This book presents the fundamentals of multiphase production with regard to flow simulations in multiphase pipelines, multiphase pumping and multiphase metering. It gives a large range of information on approaches and technologies which can be used today. It is designed for engineers involved in field development, but also for petroleum engineering students.
Book Synopsis Semi-Analytical Modeling of Fluid Flow in and Formation Evaluation of Unconventional Reservoir Using Boundary Integration Strategies by : Chang Su
Download or read book Semi-Analytical Modeling of Fluid Flow in and Formation Evaluation of Unconventional Reservoir Using Boundary Integration Strategies written by Chang Su and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tight oil/gas has been increasingly playing a more and more important role in petroleum industry around the globe for the past two decades and accounting for more share of total production of oil/gas each year. Fractured vertical or horizontal wells contribute most of the tight oil/gas production. Understanding and analyzing fluid flow in the process of fracturing, therefore, become crucial in tight formation production. However, the resulting complexity of fracture propagation from fracture injection test in tight formation, which currently is one the most heated topics for unconventional reservoirs, and heterogeneity problems of tight oil/gas reservoir with non-uniform distribution of rock/fluid properties bring great difficulties in modeling of such complex well-reservoir systems so as to evaluate reservoir characteristics and simulate a variety of reservoir flowing behaviours. Using boundary integration strategies and source and sink function methodology, this dissertation tackles the problems of modeling fracture-propagation-and-closure process along with analyzing the fracture injection test data (mini-fracturing test) in homogeneous reservoir, and modeling of fluid flow in different types of heterogeneous reservoirs. In particular, they are: (1) Analytical Modeling of Fracture Propagation on Evaluation of Transient Pressure Behavior during Injection and after Shut-in: Minifrac Test Analysis by Model-Based Type Curves; (2) Modeling of Multi-stage Fractured Horizontal Well Producing in Multilayered Reservoir with Inter-layer Crossflow; (3) Semi-analytical Modeling of 2-Dimensional Heterogeneous Reservoir by Using Boundary Element Method. II What is presented is that a practical fracture-propagation-and-closure process is modeled, its solution in terms of pressure and leak-off rate behaviors in type curve format is generated and the model-based solutions are applied using curve matching strategy in analyzing field mini-fracturing testing data to evaluate the leak-off rate behavior along a fracture, in order to obtain the fracture geometry, attain an instantaneous shut-in pressure (ISIP), extract reservoir flowing capacity (kh) and detect closure pressure Pc. A reasonable set of parameter solutions can be obtained using the model developed in this study due to a proper modeling of the physical process. Robust analytical results on transient pressure behavior under constant rate and rate response under constant bottom pressure are presented in type curve format as well as inter-layer crossflow for the multilayered reservoir system. By applying boundary element method (BEM), pressure- and rate-transient behaviours of reservoir with multi-scale heterogeneities bounded by arbitrarily shaped boundaries/surfaces are also presented.
Book Synopsis Applied Multiphase Flow in Pipes and Flow Assurance by : Eissa M. Al-Safran
Download or read book Applied Multiphase Flow in Pipes and Flow Assurance written by Eissa M. Al-Safran and published by . This book was released on 2017 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Multiphase Flow in Pipes and Flow Assurance - Oil and Gas Production delivers the most recent advancements in multiphase flow technology while remaining easy to read and appropriate for undergraduate and graduate petroleum engineering students. Responding to the need for a more up-to-the-minute resource, this highly anticipated new book represents applications on the fundamentals with new material on heat transfer in production systems, flow assurance, transient multiphase flow in pipes and the TUFFP unified model. The complex computation procedure of mechanistic models is simplified through solution flowcharts and several example problems. Containing over 50 solved example problems and 140 homework problems, this new book will equip engineers with the skills necessary to use the latest steady-state simulators available.
Book Synopsis Multiphase Flow Dynamics 4 by : Nikolay Ivanov Kolev
Download or read book Multiphase Flow Dynamics 4 written by Nikolay Ivanov Kolev and published by Springer. This book was released on 2011-09-25 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present Volume 4 of the successful monograh package “Multiphase Flow Dynamics”is devoted to selected Chapters of the multiphase fluid dynamics that are important for practical applications but did not find place in the previous volumes. The state of the art of the turbulence modeling in multiphase flows is presented. As introduction, some basics of the single phase boundary layer theory including some important scales and flow oscillation characteristics in pipes and rod bundles are presented. Then the scales characterizing the dispersed flow systems are presented. The description of the turbulence is provided at different level of complexity: simple algebraic models for eddy viscosity, simple algebraic models based on the Boussinesq hypothesis, modification of the boundary layer share due to modification of the bulk turbulence, modification of the boundary layer share due to nucleate boiling. The role of the following forces on the mathematical description of turbulent flows is discussed: the lift force, the lubrication force in the wall boundary layer, and the dispersion force. A pragmatic generalization of the k-eps models for continuous velocity field is proposed containing flows in large volumes and flows in porous structures. A Methods of how to derive source and sinks terms for multiphase k-eps models is presented. A set of 13 single- and two phase benchmarks for verification of k-eps models in system computer codes are provided and reproduced with the IVA computer code as an example of the application of the theory. This methodology is intended to help other engineers and scientists to introduce this technology step-by-step in their own engineering practice. In many practical application gases are solved in liquids under given conditions, released under other conditions and therefore affecting technical processes for good of for bad. Useful information on the solubility of oxygen, nitrogen, hydrogen and carbon dioxide in water under large interval of pressures and temperatures is collected, and appropriate mathematical approximation functions are provided. In addition methods for the computation of the diffusion coefficients are described. With this information solution and dissolution dynamics in multiphase fluid flows can be analyzed. For this purpose the non-equilibrium absorption and release on bubble, droplet and film surfaces under different conditions is mathematically described. A systematic set of internally consistent state equations for diesel fuel gas and liquid valid in broad range of changing pressure and temperature is provided. This new second edition includes various updates, extensions, improvements and corrections. In many practical application gases are solved in liquids under given conditions, released under other conditions and therefore affecting technical processes for good of for bad. Useful information on the solubility of oxygen, nitrogen, hydrogen and carbon dioxide in water under large interval of pressures and temperatures is collected, and appropriate mathematical approximation functions are provided. In addition methods for the computation of the diffusion coefficients are described. With this information solution and dissolution dynamics in multiphase fluid flows can be analyzed. For this purpose the non-equilibrium absorption and release on bubble, droplet and film surfaces under different conditions is mathematically described. A systematic set of internally consistent state equations for diesel fuel gas and liquid valid in broad range of changing pressure and temperature is provided. This new second edition includes various updates, extensions, improvements and corrections.
Book Synopsis Advanced Petroleum Reservoir Simulation by : M. R. Islam
Download or read book Advanced Petroleum Reservoir Simulation written by M. R. Islam and published by John Wiley & Sons. This book was released on 2010-10-26 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Petroleum Reservoir Simulation Add precision and ease to the process of reservoir simulation. Until simulation software and other methods of reservoir characterization were developed, engineers had to drill numerous wells to find the best way to extract crude oil and natural gas. Today, even with highly sophisticated reservoir simulations software available, reservoir simulation still involves a great deal of guesswork. Advanced Petroleum Reservoir Simulation provides an advanced approach to petroleum reservoir simulation, taking the guesswork out of the process and relying more thoroughly on science and what is known about the individual reservoir. This state of the art publication in petroleum simulation: Describes solution techniques that allow multiple solutions to the complete equations, without linearization. Solves the most difficult reservoir engineering problems such as viscous fingering. Highlights the importance of non-linear solvers on decision tree with scientific argument. Discusses solution schemes in relation to other disciplines and revolutionizes risk analysis and decision making. Includes companion software with 3-D, 3-phase multipurpose simulator code available for download from www.scrivenerpublishing.com. By providing a valuable tool to support reservoir simulation predictions with real science, this book is an essential reference for engineers, scientists and geologists.
Book Synopsis Petroleum Abstracts. Literature and Patents by :
Download or read book Petroleum Abstracts. Literature and Patents written by and published by . This book was released on 1990 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Upscaling of Single- and Two-Phase Flow in Reservoir Engineering by : Hans Bruining
Download or read book Upscaling of Single- and Two-Phase Flow in Reservoir Engineering written by Hans Bruining and published by CRC Press. This book was released on 2021-11-14 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Explains exergy return on exergy invested (ERoEI) so that the reader can make his own judgements as to the costs of recovering energy from conventional and non-conventional resources - Deals with single phase flow aspects (inertia, anisotropy, slip), which admittedly are covered in other textbooks, but out of the contexts of petroleum and environmental engineering. - Gives readers the tools to generate heterogeneous permeability fields (stochastic random fields, marked point processes, Markov chains, which makes it possible to evaluate the effects of heterogeneity on flow - Includes an elaborate section on surface chemistry to understand wetting behaviour and its influence on the relative permeability and capillary pressure behaviour - Derives effective permeabilities and relative permeabilities in upscaled models and illustrates this with examples in EXCEL
Book Synopsis Collocation Techniques for Modeling Compositional Flows in Oil Reservoirs by : Myron B. III. Allen
Download or read book Collocation Techniques for Modeling Compositional Flows in Oil Reservoirs written by Myron B. III. Allen and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This investigation is an outgrowth of my doctoral dissertation at Princeton University. I am particularly grateful to Professors George F. Pinder and William G. Gray of Princeton for their advice during both my research and my writing. I believe that finite-element collocation holds promise as a numer ical scheme for modeling complicated flows in porous media. However, there seems to be a "conventional wisdom" maintaining that collocation is hopelessly beset by oscillations and is, in some way, fundamentally inappropriate for multiphase flows. I hope to dispel these objections, realizing that others will remain for further work. The U. S. National Science Foundation funded much of this study through grant number NSF-CEE-8111240. TABLE OF CONTENTS ABSTRACT ;; FOREWORD ;; ; CHAPTER ONE. THE PHYSICAL SYSTEM. 1.1 Introduction. 1 1.2 The reservoir and its contents. 5 1.3 Reservoir mechanics. 9 1.4 Supplementary constraints. 18 1.5 Governing equations. 26 CHAPTER TWO. REPRESENTING FLUID-PHASE BEHAVIOR. 39 2.1 Thermodynamics of the fluid system. 40 2.2 Standard equation-of-state methods. 45 2.3 Maxwell-set interpolation.
