High Efficiency Linear Envelope Tracking And Envelope Elimination And Restoration Power Amplifier For Wlan Ofdm Applications

Download High Efficiency Linear Envelope Tracking And Envelope Elimination And Restoration Power Amplifier For Wlan Ofdm Applications full books in PDF, epub, and Kindle. Read online High Efficiency Linear Envelope Tracking And Envelope Elimination And Restoration Power Amplifier For Wlan Ofdm Applications ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

High Efficiency Linear Envelope Tracking and Envelope Elimination and Restoration Power Amplifier for WLAN OFDM Applications

Author : Feipeng Wang
Publisher :
ISBN 13 :
Total Pages : 131 pages
Book Rating : 4.:/5 (819 download)

DOWNLOAD NOW!

Book Synopsis High Efficiency Linear Envelope Tracking and Envelope Elimination and Restoration Power Amplifier for WLAN OFDM Applications by : Feipeng Wang

Download or read book High Efficiency Linear Envelope Tracking and Envelope Elimination and Restoration Power Amplifier for WLAN OFDM Applications written by Feipeng Wang and published by . This book was released on 2006 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: High efficiency radio frequency (RF) power amplifiers (PAs) are critical in portable battery-operated wireless communication systems because they can dominate the power consumption. Linear power amplifier is required for envelope modulated signal. Traditionally, linear power amplifiers are implemented by "backing-off" the Class-A or Class-AB PA. However for a high peak-to-average (PAR) signal, the average efficiency is much lower than the peak efficiency, which is well down as the inherent trade-off between linearity and efficiency. This dissertation focuses on Envelope Elimination and Restoration (EER) and Envelope Tracking (ET) efficiency enhancement techniques to improve the PA average efficiency for high PAR signal. The EER and ET PA structures are investigated. Wideband ET and "hybrid" EER structures are proposed for WLAN 802.11g signal at 20MHz signal. Two major challenges of the wideband EER and ET PAs are investigated: 1) An adaptive time-alignment algorithm was proposed to calibrate the time-mismatch in wideband EER and ET systems; (2) A high efficiency wideband envelope amplifier is designed for wideband EER and wideband ET applications. A monolithic wideband high efficiency ET power amplifier is designed and implemented for WLAN 802.11g applications in IBM SiGe BiCMOS technology. Digital pre-distortion was implemented to reduce the EVM of the amplifier. The measured overall power-added efficiency of the amplifier is 28% at 20 dBm (100mW) output power.

Envelope Tracking Power Amplifiers for Wireless Communications

Author : Zhancang Wang
Publisher : Artech House
ISBN 13 : 1608077845
Total Pages : 363 pages
Book Rating : 4.6/5 (8 download)

DOWNLOAD NOW!

Book Synopsis Envelope Tracking Power Amplifiers for Wireless Communications by : Zhancang Wang

Download or read book Envelope Tracking Power Amplifiers for Wireless Communications written by Zhancang Wang and published by Artech House. This book was released on 2014-06-01 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Envelope tracking technology is seen as the most promising efficiency enhancement technology for RF power amplifiers for 4G and beyond wireless communications. More and more organizations are investing and researching on this topic with huge potential in academic and commercial areas. This is the first book on the market to offer complete introduction, theory, and design considerations on envelope tracking for wireless communications. This resource presents you with a full introduction to the subject and covers underlying theory and practical design considerations.

Linear CMOS RF Power Amplifiers for Wireless Applications

Author : Paulo Augusto Dal Fabbro
Publisher : Springer Science & Business Media
ISBN 13 : 9048193613
Total Pages : 171 pages
Book Rating : 4.0/5 (481 download)

DOWNLOAD NOW!

Book Synopsis Linear CMOS RF Power Amplifiers for Wireless Applications by : Paulo Augusto Dal Fabbro

Download or read book Linear CMOS RF Power Amplifiers for Wireless Applications written by Paulo Augusto Dal Fabbro and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in electronics have pushed mankind to create devices, ranging from - credible gadgets to medical equipment to spacecraft instruments. More than that, modern society is getting used to—if not dependent on—the comfort, solutions, and astonishing amount of information brought by these devices. One ?eld that has continuously bene?tted from those advances is the radio frequency integrated c- cuit (RFIC) design, which in its turn has promoted countless bene?ts to the mankind as a payback. Wireless communications is one prominent example of what the - vances in electronics have enabled and their consequences to our daily life. How could anyone back in the eighties think of the possibilities opened by the wireless local area networks (WLANs) that can be found today in a host of places, such as public libraries, coffee shops, trains, to name just a few? How can a youngster, who lives this true WLAN experience nowadays, imagine a world without it? This book dealswith the design oflinearCMOS RF PowerAmpli?ers(PAs). The RF PA is a very important part of the RF transceiver, the device that enables wireless communications. Two important aspects that are key to keep the advances in RF PA design at an accelerate pace are treated: ef?ciency enhancement and frequen- tunable capability. For this purpose, the design of two different integrated circuits realizedina0. 11μmtechnologyispresented,eachoneaddressingadifferentaspect. With respect to ef?ciency enhancement, the design of a dynamic supply RF power ampli?er is treated, making up the material of Chaps. 2 to 4.

Multi-Mode / Multi-Band RF Transceivers for Wireless Communications

Author : Gernot Hueber
Publisher : John Wiley & Sons
ISBN 13 : 1118102207
Total Pages : 608 pages
Book Rating : 4.1/5 (181 download)

DOWNLOAD NOW!

Book Synopsis Multi-Mode / Multi-Band RF Transceivers for Wireless Communications by : Gernot Hueber

Download or read book Multi-Mode / Multi-Band RF Transceivers for Wireless Communications written by Gernot Hueber and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Includes original contributions from distinguished researchers and professionals. Covers cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Contributors are all leading researchers and professionals in this field.

Reconfigurable RF Power Amplifiers on Silicon for Wireless Handsets

Author : Laurent Leyssenne
Publisher : Springer Science & Business Media
ISBN 13 : 9400704259
Total Pages : 180 pages
Book Rating : 4.4/5 (7 download)

DOWNLOAD NOW!

Book Synopsis Reconfigurable RF Power Amplifiers on Silicon for Wireless Handsets by : Laurent Leyssenne

Download or read book Reconfigurable RF Power Amplifiers on Silicon for Wireless Handsets written by Laurent Leyssenne and published by Springer Science & Business Media. This book was released on 2011-01-11 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reconfigurable RF Power Amplifiers on Silicon for Wireless Handsets is intended to designers and researchers who have to tackle the efficiency/linearity trade-off in modern RF transmitters so as to extend their battery lifetime. High data rate 3G/4G standards feature broad channel bandwidths, high dynamic range and critical envelope variations which generally forces the power amplifier (PA) to operate in a low efficiency “backed-off” regime. Classic efficiency enhancement techniques such as Envelope Elimination and Restoration reveal to be little compliant with handset-dedicated PA implementation due to their channel-bandwidth-limited behavior and their increased die area consumption and/or bill-of-material. The architectural advances that are proposed in this book circumvent these issues since they put the stress on low die-area /low power-consumption control circuitry. The advantages of silicon over III/V technologies are highlighted by several analogue signal processing techniques that can be implemented on-chip with a power amplifier. System-level and transistor-level simulations are combined to illustrate the principles of the proposed power adaptive solutions. Measurement on BICMOS demonstrators allows validating the functionality of dynamic linearity/efficiency management. In Reconfigurable RF Power Amplifiers on Silicon for Wireless Handsets, PA designers will find a review of technologies, architectures and theoretical formalisms (Volterra series...) that are traditionally related to PA design. Specific issues that one encounters in power amplifiers (such as thermal / memory effects, stability, VSWR sensitivity...) and the way of overcoming them are also extensively considered throughout this book.

High Efficiency Wideband Envelope Tracking Power Amplifier for Next-generation Wireless Communications

Author : Myoungbo Kwak
Publisher :
ISBN 13 : 9781124856230
Total Pages : 109 pages
Book Rating : 4.8/5 (562 download)

DOWNLOAD NOW!

Book Synopsis High Efficiency Wideband Envelope Tracking Power Amplifier for Next-generation Wireless Communications by : Myoungbo Kwak

Download or read book High Efficiency Wideband Envelope Tracking Power Amplifier for Next-generation Wireless Communications written by Myoungbo Kwak and published by . This book was released on 2011 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest generation of smart devices deployed in cellular networks has created explosive growth in network data traffic, and the increasing demand for broadband services with higher data rates, require higher peak to average power ratio (PAPR) with wider bandwidth. One of the challenges in the conventional power amplifiers (PAs) with fixed supply voltage, is the degraded efficiency and generated heats at a large back-off to meet tight linearity requirements. This dissertation presents high efficiency wideband envelope tracking power amplifiers for 2.1 GHz micro base-stations and 2.5 GHz wireless mobile applications. By superimposing the envelope signal at the drain such that the RF amplifier operates consistently closer to saturation, the overall efficiency is improved and the generated heat is reduced dramatically. In the first part of the dissertation, a high performance BiCMOS DMOS monolithic envelope amplifier for micro-base station power amplifiers is presented. Due to the low breakdown voltage of the CMOS transistors, the high voltage envelope amplifier has been implemented with discrete components with high voltage process. Compared to these discrete solutions, an integrated circuits implementation for the envelope amplifier brings many benefits. The design of monolithic envelope amplifiers for high voltage (VDD = 15 V) envelope tracking applications, and the design techniques to solve the reliability issues with thin gate oxide is described. The overall envelope tracking system employing a GaN-HEMT RF transistor, and fully integrated high voltage envelope amplifier with a 0.35[mu]m BiCMOS DMOS process, is demonstrated. In the second part, a high-efficiency wideband envelope tracking power amplifier for mobile LTE applications will be presented. The CMOS envelope amplifier with hybrid linear and switcher is designed in a 150 nm CMOS process. The envelope amplifier employs direct sensing of the linear stage current to reduce the propagation delay in the switcher. The strategy is demonstrated to improve the efficiency of the complete envelope tracking power amplifier system. The resulting performance of envelope tracking system employing a GaAs HBT-based RF PA with a 5 MHz LTE signal input demonstrated state-of-the-art efficiency while meet the linearity requirement.

RF and mm-Wave Power Generation in Silicon

Author : Hua Wang
Publisher : Academic Press
ISBN 13 : 0124095224
Total Pages : 578 pages
Book Rating : 4.1/5 (24 download)

DOWNLOAD NOW!

Book Synopsis RF and mm-Wave Power Generation in Silicon by : Hua Wang

Download or read book RF and mm-Wave Power Generation in Silicon written by Hua Wang and published by Academic Press. This book was released on 2015-12-10 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and mm-Wave Power Generation in Silicon presents the challenges and solutions of designing power amplifiers at RF and mm-Wave frequencies in a silicon-based process technology. It covers practical power amplifier design methodologies, energy- and spectrum-efficient power amplifier design examples in the RF frequency for cellular and wireless connectivity applications, and power amplifier and power generation designs for enabling new communication and sensing applications in the mm-Wave and THz frequencies. With this book you will learn: Power amplifier design fundamentals and methodologies Latest advances in silicon-based RF power amplifier architectures and designs and their integration in wireless communication systems State-of-the-art mm-Wave/THz power amplifier and power generation circuits and systems in silicon Extensive coverage from fundamentals to advanced design topics, focusing on various layers of abstraction: from device modeling and circuit design strategy to advanced digital and mixed-signal architectures for highly efficient and linear power amplifiers New architectures for power amplifiers in the cellar and wireless connectivity covering detailed design methodologies and state-of-the-art performances Detailed design techniques, trade-off analysis and design examples for efficiency enhancement at power back-off and linear amplification for spectrally-efficient non-constant envelope modulations Extensive coverage of mm-Wave power-generation techniques from the early days of the 60 GHz research to current state-of the-art reconfigurable, digital mm-Wave PA architectures Detailed analysis of power generation challenges in the higher mm-Wave and THz frequencies and novel technical solutions for a wide range for potential applications, including ultrafast wireless communication to sensing, imaging and spectroscopy Contributions from the world-class experts from both academia and industry

High Efficiency Broadband Envelope-Tracking Power Amplifiers

Author : Jonmei Johana Yan
Publisher :
ISBN 13 : 9781303195266
Total Pages : 168 pages
Book Rating : 4.1/5 (952 download)

DOWNLOAD NOW!

Book Synopsis High Efficiency Broadband Envelope-Tracking Power Amplifiers by : Jonmei Johana Yan

Download or read book High Efficiency Broadband Envelope-Tracking Power Amplifiers written by Jonmei Johana Yan and published by . This book was released on 2013 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to meet the increasing demand for higher data rates while maximizing spectral efficiency, modern wireless communication systems transmit complex non-constant envelope modulation signals with high peak-to-average ratio (PAPR). As a result, conventional power amplifiers must be operated in back-off, leading to a significant efficiency reduction. Various power amplifier architectures (i.e. Doherty, outphasing, and envelope tracking) have been demonstrated to achieve high efficiency for these high PAPR signals. Unlike the other architectures, the envelope tracking power amplifier (ETPA) makes an excellent candidate for multi-band multi-frequency use, while maintaining high efficiency for high PAPR and under average power back-off, as it is fundamentally immune to changes in the frequency of the carrier; it depends only on the envelope of the RF signal. This dissertation focuses on the design of envelope tracking power amplifiers for enabling broadband wireless communication systems. First, a test-bench for evaluating broadband ETPAs is described. A calibration routine, acting as a pre-equalizer, is used to achieve a flat linear response over the entire instantaneous bandwidth of the system, resulting in less than 1% EVM for a 40 MHz LTE signal. Performances of envelope tracking power amplifiers on this test-bench at various frequencies from UHF to millimeter-wave are evaluated, and record efficiencies are demonstrated. Next, this dissertation describes how in under practical usage, the power transmitted fluctuates as a function of the load demands over time. The long-term efficiency of the ETPA is evaluated using Monte-Carlo simulations based on a projected time-varying power profile. Compared to a Doherty PA with the same peak efficiency, the ETPA can provide more than 1.4x reduction in overall energy consumed. The ETPA thus provides significant opportunities for system energy savings under realistic operation. Thirdly, to accommodate the wide range of carrier frequencies required for numerous emerging wireless systems, a multi-octave RFPA based on a compact GaN stacked IC with RC feedback is designed, fabricated, and evaluated. Multi-octave ET operation was demonstrated from 500 to 1750 MHz with >25% efficiency. Compared to its constant drain voltage counterpart, >2x improvement in RFPA efficiency is observed in ET. Lastly, while the ETPA provides advantages such as broad carrier bandwidths and high efficiency under back-off operation, one of the main challenges in ETPA design lies in accommodating wide modulation bandwidths. Adaptive de-troughing, a digital signal processing approach for extending the modulation bandwidth capability of an existing dynamic power supply, is described and evaluated. Measurements demonstrated the ability to extend ET operation to 20 MHz LTE signals. In addition, ~5-6% modulator efficiency enhancement was measured when comparing "standard" to "adaptive" de-troughing supply waveforms.

Wideband High Efficiency CMOS Envelope Amplifiers for 4G LTE Handset Envelope Tracking RF Power Amplifiers

Author : Muhammad Hassan
Publisher :
ISBN 13 : 9781267434951
Total Pages : 124 pages
Book Rating : 4.4/5 (349 download)

DOWNLOAD NOW!

Book Synopsis Wideband High Efficiency CMOS Envelope Amplifiers for 4G LTE Handset Envelope Tracking RF Power Amplifiers by : Muhammad Hassan

Download or read book Wideband High Efficiency CMOS Envelope Amplifiers for 4G LTE Handset Envelope Tracking RF Power Amplifiers written by Muhammad Hassan and published by . This book was released on 2012 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourth generation cellular networks offer performance similar to cable modems while allowing wide mobility. Although the use of orthogonal frequency division multiplexing in fourth generation increases its spectral efficiency but it also increases the peak-to-average power ratio of the transmitted signal. If a conventional power amplifier is used to transmit a high peak-to-average power ratio signal, then to meet the stringent linearity requirements, it will be operating 6 to 10 dB back-off from the maximum output power. This is the region where power amplifier has lower efficiency. To overcome the low efficiency problem, the envelope tracking power amplifier architecture has been proposed in the literature due to its feature of high efficiency over a wide power range. The overall efficiency of the envelope tracking system is the product of the power amplifier efficiency and the envelope amplifier efficiency, which provides the dynamically varying power supply voltage. This dissertation focuses on developing high efficiency envelope amplifiers for wideband applications. First, a CMOS envelope amplifier is developed which cuts the quiescent power dissipation by half over the conventional designs and also employs more accurate current sensing. In order to further improve its efficiency, a dynamic supply is provided on the linear amplifier, which improves the overall efficiency by 6% in measurements. Secondly, modeling of power amplifier operating under envelope shaping is described, in order to accurately predict the efficiency of the envelope amplifier. Also, the stability of the envelope amplifier is analyzed under nonlinear resistive load operation. The overall envelope tracking system achieves a record high efficiency of 43% for 20 MHz LTE signal using a GaAs power amplifier. Finally, another new architecture for CMOS envelope amplifier is developed for efficiency enhancement, using deadband controller. A linearized describing function analysis is done on the proposed architecture, to predict the frequency responses of each block, which matches pretty well with the simulations. The stacked implementation of linear and switching amplifiers allows 6V supply while using all 3.3V devices for them. This leads to integration of envelop amplifiers into submicron CMOS processes.

High Power, Linear CMOS Power Amplifier for WLAN Applications

Author : Ali Afsahi
Publisher :
ISBN 13 : 9781303625022
Total Pages : 98 pages
Book Rating : 4.6/5 (25 download)

DOWNLOAD NOW!

Book Synopsis High Power, Linear CMOS Power Amplifier for WLAN Applications by : Ali Afsahi

Download or read book High Power, Linear CMOS Power Amplifier for WLAN Applications written by Ali Afsahi and published by . This book was released on 2013 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of CMOS technology has enabled a high level of integration in modern, low cost, small form-factor and low power wireless devices. While power amplifiers (PAs) are key components in wireless transceivers, their realization and integration in standard CMOS technology has shown several challenges. The modern wireless standards such as WLAN and LTE, utilize higher order modulation schemes in order to increase the data rate and efficiently use the limited available spectrum and also provide a robust link in a fading environment. These modulations possess a very high peak-to-average ratio (PAR) and require a very linear power amplifier to preserve the integrity of the signal. In this dissertation several linearization and power combining techniques have been proposed to address the challenges of designing a high power and linear PA in CMOS for WLAN applications. To demonstrate these techniques in silicon, three chips have been designed and fabricated in 65nm standard CMOS. In the first chip, a fully integrated dual-band power amplifiers with on-chip baluns for 802.11n MIMO WLAN applications are implemented. With a 3.3v supply, the PAs produce a saturated output power of 28.3dBm and 26.7dBm with peak drain efficiency of 35.3% and 25.3% for the 2.4GHz and 5GHz bands, respectively. By utilizing multiple fully self-contained linearization algorithms, an EVM of -25dB is achieved at 22.4dBm for the 2.4GHz band and 20.5dBm for the 5GHz band while transmitting 54Mbs OFDM. In the next two designs, two monolithic power combining schemes for CMOS power amplifiers, distributed-LC and current-mode transformer-based, are compared. Fully integrated 2.4GHz power amplifiers (PAs) using these techniques were fabricated. From a 3.3 V supply, the distributed-LC combined PA produces a saturated power of 31.5dBm with peak PAE of 25%. The current-mode transformer based PA combiner produces 33.5dBm saturated power with 37.6% peak PAE. With gm-linearization and digital pre-distortion, these PAs transmit 25.5dBm and 26.4dBm with -25dB EVM for a 54Mb/s OFDM signal respectively.

Bandwidth and Efficiency Enhancement in Radio Frequency Power Amplifiers for Wireless Transmitters

Author : Karun Rawat
Publisher : Springer Nature
ISBN 13 : 3030388662
Total Pages : 390 pages
Book Rating : 4.0/5 (33 download)

DOWNLOAD NOW!

Book Synopsis Bandwidth and Efficiency Enhancement in Radio Frequency Power Amplifiers for Wireless Transmitters by : Karun Rawat

Download or read book Bandwidth and Efficiency Enhancement in Radio Frequency Power Amplifiers for Wireless Transmitters written by Karun Rawat and published by Springer Nature. This book was released on 2020-03-05 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on broadband power amplifier design for wireless communication. Nonlinear model embedding is described as a powerful tool for designing broadband continuous Class-J and continuous class F power amplifiers. The authors also discuss various techniques for extending bandwidth of load modulation based power amplifiers, such as Doherty power amplifier and Chireix outphasing amplifiers. The book also covers recent trends on digital as well as analog techniques to enhance bandwidth and linearity in wireless transmitters. Presents latest trends in designing broadband power amplifiers; Covers latest techniques for using nonlinear model embedding in designing power amplifiers based on waveform engineering; Describes the latest techniques for extending bandwidth of load modulation based power amplifiers such as Doherty power amplifier and Chireix outphasing amplifiers; Includes coverage of hybrid analog/digital predistortion as wideband solution for wireless transmitters; Discusses recent trends on on-chip power amplifier design with GaN /GaAs MMICs for high frequency applications.

High Slew-rate Adaptive Biasing Hybrid Envelope Tracking Supply Modulator for LTE Applications

Author : Yue Jing
Publisher :
ISBN 13 :
Total Pages : 58 pages
Book Rating : 4.:/5 (124 download)

DOWNLOAD NOW!

Book Synopsis High Slew-rate Adaptive Biasing Hybrid Envelope Tracking Supply Modulator for LTE Applications by : Yue Jing

Download or read book High Slew-rate Adaptive Biasing Hybrid Envelope Tracking Supply Modulator for LTE Applications written by Yue Jing and published by . This book was released on 2017 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wireless communication enters smartphone era, more complicated communication technologies are being used to transmit higher data rate. Power amplifier (PA) has to work in back-off region, while this inevitably reduces battery life for cellphones. Various techniques have been reported to increase PA efficiency, such as envelope elimination and restoration (EER) and envelope tracking (ET). However, state of the art ET supply modulators failed to address high efficiency, high slew rate, and accurate tracking concurrently. In this dissertation, a linear-switch mode hybrid ET supply modulator utilizing adaptive biasing and gain enhanced current mirror operational transconductance amplifier (OTA) with class-AB output stage in parallel with a switching regulator is presented. In comparison to a conventional OTA design with similar quiescent current consumption, proposed approach improves positive and negative slew rate from 50 V/μs to 93.4 V/μs and -87 V/μs to -152.5 V/μs respectively, dc gain from 45 dB to 67 dB while consuming same amount of quiescent current. The proposed hybrid supply modulator achieves 83% peak efficiency, power added efficiency (PAE) of 42.3% at 26.2 dBm for a 10 MHz 7.24 dB peak-to-average power ratio (PAPR) LTE signal and improves PAE by 8% at 6 dB back off from 26.2 dBm power amplifier (PA) output power with respect to fixed supply. With a 10 MHz 7.24 dB PAPR QPSK LTE signal the ET PA system achieves adjacent channel leakage ratio (ACLR) of -37.7 dBc and error vector magnitude (EVM) of 4.5% at 26.2 dBm PA output power, while with a 10 MHz 8.15 dB PAPR 64QAM LTE signal the ET PA system achieves ACLR of -35.6 dBc and EVM of 6% at 26 dBm PA output power without digital pre-distortion (DPD). The proposed supply modulator core circuit occupies 1.1 mm2 die area, and is fabricated in a 0.18 μm CMOS technology.

High-Efficiency Load Modulation Power Amplifiers for Wireless Communications

Author : Zhancang Wang
Publisher : Artech House
ISBN 13 : 1630814679
Total Pages : 389 pages
Book Rating : 4.6/5 (38 download)

DOWNLOAD NOW!

Book Synopsis High-Efficiency Load Modulation Power Amplifiers for Wireless Communications by : Zhancang Wang

Download or read book High-Efficiency Load Modulation Power Amplifiers for Wireless Communications written by Zhancang Wang and published by Artech House. This book was released on 2017-06-30 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge resource presents a complete and systematic overview of the practical design considerations of radio frequency (RF) high efficiency load modulation power amplifiers (PA) for modern wireless communications for 4G and beyond. It provides comprehensive insight into all aspects of load modulation PA design and optimization not only covering design approaches specifically for passive and active load modulation operation but also hybrid with dynamic supply modulation and digital signal processing algorithms required for performance enhancement. Passive load impedance tuner design, dynamic load modulation PA, active load modulation PA and Doherty PA design for efficiently enhancement are explained. Readers find practical guidance into load modulation PA design for bandwidth extension, including video bandwidth enhancement techniques, broadband dynamic load amplifiers, topology selection, design procedures, and network output. This book presents the evolution and integration of classical load modulation PA topologies in order to meet new challenges in the field.

Envelope Amplifier Design for Wireless Base-station Power Amplifiers

Author : Chin Hsia
Publisher :
ISBN 13 : 9781124324258
Total Pages : 128 pages
Book Rating : 4.3/5 (242 download)

DOWNLOAD NOW!

Book Synopsis Envelope Amplifier Design for Wireless Base-station Power Amplifiers by : Chin Hsia

Download or read book Envelope Amplifier Design for Wireless Base-station Power Amplifiers written by Chin Hsia and published by . This book was released on 2010 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to deliver high data rates, modern wireless communication systems transmit complex modulated signals with high peak-to-average ratio, which demands wide bandwidth and stringent linearity performance for power amplifiers. To satisfy spectral mask regulations and achieve adequate error vector magnitude, power amplifiers typically operate at 6 to 10 dB back-off from the maximum output power, leading to low efficiency. To overcome the low efficiency problem, the envelope tracking power amplifier architecture has been proposed for this type of application due to its feature of high efficiency over a wide power range. The overall efficiency of an envelope tracking system relies not only on performance of the RF power amplifier but also on that of an envelope amplifier that provides a dynamically varying power supply voltage. This dissertation focuses on envelope amplifier design for efficiency enhancement of envelope tracking power amplifiers. First, the envelope tracking power amplifier architecture is analyzed, and the efficiency of a RF transistor in the envelope tracking technique is described. Then envelope amplifier behavior is investigated and a general purpose simulator is developed for analyzing and designing an envelope amplifier. Power loss and efficiency of the envelope amplifier is analyzed and compared with experimental results. The design of envelope amplifiers for high voltage (> 30 V) envelope tracking applications is described. A high voltage envelope amplifier is designed, implemented and verified. The overall envelope tracking system employing a GaN-HEMT RF transistor is demonstrated. Finally, a new architecture is developed for the efficiency enhancement of envelope amplifiers, using a digitally assisted controller design. Digital control is utilized to mitigate delay in the control loop inside the envelope amplifier, leading to lower overall power dissipation. A novel envelope amplifier architecture with dual-switcher stages based on the digitally-assisted control strategy is proposed, designed and implemented. The strategy is demonstrated to improve the efficiency of envelope amplifier as well as the system overall efficiency. The resulting performance of envelope tracking system employing a GaAs high voltage HBT with a single carrier W-CDMA input demonstrated state-of-the-art efficiency with good linearity performance.

Development of a High-efficiency Power Amplifier for Envelope Tracking Applications

Author : Zulhazmi Bin A. Mokhti
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (16 download)

DOWNLOAD NOW!

Book Synopsis Development of a High-efficiency Power Amplifier for Envelope Tracking Applications by : Zulhazmi Bin A. Mokhti

Download or read book Development of a High-efficiency Power Amplifier for Envelope Tracking Applications written by Zulhazmi Bin A. Mokhti and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

High Efficiency Power Amplifier Design for 28 GHz 5G Transmitters

Author : Nourhan Elsayed
Publisher : Springer Nature
ISBN 13 : 3030927466
Total Pages : 105 pages
Book Rating : 4.0/5 (39 download)

DOWNLOAD NOW!

Book Synopsis High Efficiency Power Amplifier Design for 28 GHz 5G Transmitters by : Nourhan Elsayed

Download or read book High Efficiency Power Amplifier Design for 28 GHz 5G Transmitters written by Nourhan Elsayed and published by Springer Nature. This book was released on 2022-02-02 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces power amplifier design in 22nm FDSOI CMOS dedicated towards 5G applications at 28 GHz and presents 4 state-of-the-art power amplifier designs. The authors discuss power amplifier performance metrics, design trade-offs, and presents different power amplifier classes utilizing efficiency enhancement techniques at 28 GHz. The book presents the design process from theory, simulation, layout, and finally measurement results.

CMOS Nanoelectronics: Analog and RF VLSI Circuits

Author : Krzysztof Iniewski
Publisher : McGraw Hill Professional
ISBN 13 : 0071755667
Total Pages : 705 pages
Book Rating : 4.0/5 (717 download)

DOWNLOAD NOW!

Book Synopsis CMOS Nanoelectronics: Analog and RF VLSI Circuits by : Krzysztof Iniewski

Download or read book CMOS Nanoelectronics: Analog and RF VLSI Circuits written by Krzysztof Iniewski and published by McGraw Hill Professional. This book was released on 2011-06-22 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth coverage of integrated circuit design on the nanoscale level Written by international experts in industry and academia, CMOS Nanoelectronics addresses the state of the art in integrated circuit design in the context of emerging systems. New, exciting opportunities in body area networks, wireless communications, data networking, and optical imaging are discussed. This cutting-edge guide explores emerging design concepts for very low power and describes design approaches for RF transceivers, high-speed serial links, PLL/DLL, and ADC/DAC converters. CMOS Nanoelectronics covers: Portable high-efficiency polar transmitters All-digital RF signal generation Frequency multiplier design Tunable CMOS RF filters GaAs HBT linear power amplifier design High-speed serial I/O design CDMA-based crosstalk cancellation Delta-sigma fractional-N PLL Delay locked loops Digital clock generators Analog design in deep submicron CMOS technologies 1/f noise reduction for linear analog CMOS ICs Broadband high-resolution bandpass sigma-delta modulators Analog/digital conversion specifications for power line communication systems Digital-to-analog converters for LCDs Sub-1-V CMOS bandgap reference design And much more