Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Hardness Of Ion Implanted Ceramics
Download Hardness Of Ion Implanted Ceramics full books in PDF, epub, and Kindle. Read online Hardness Of Ion Implanted Ceramics ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Hardness of Ion Implanted Ceramics by :
Download or read book Hardness of Ion Implanted Ceramics written by and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been established that the wear behavior of ceramic materials can be modified through ion implantation. Studies have been done to characterize the effect of implantation on the structure and composition of ceramic surfaces. To understand how these changes affect the wear properties of the ceramic, other mechanical properties must be measured. To accomplish this, a commercially available ultra low load hardness tester has been used to characterize Al2O3 with different implanted species and doses. The hardness of the base material is compared with the highly damaged crystalline state as well as the amorphous material.
Book Synopsis Emergent Process Methods for High-Technology Ceramics by : Robert F. Davis
Download or read book Emergent Process Methods for High-Technology Ceramics written by Robert F. Davis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the Proceedings of the November 8-10, 1982 Conference on EMERGENT PROCESS METHODS FOR HIGH TECHNOLOGY CERAMICS, held at North Carolina State University in Raleigh. It was the nineteenth in a series of "University Conferences on Ceramic Sci ence" initiated in 1964 by four institutions of which North Carolina State University is a charter member, along with the University of California at Berkeley, Notre Dame University, and the New York State College of Ceramics at Alfred University. More recently, ceramic oriented faculty in departments at the Pennsylvania State University and Case-Western Reserve University have joined the four initial institutions as permanent members of the consortium. These research oriented conferences, each uniquely concerned with a timely ceramic theme, have been well attended by audiences which typically were both international and interdisciplinary in character; their published Proceedings have been well received and are frequently cited. This three day conference addressed the fundamental scientific background as well as the technological state-of-the-art of several novel methods which are beginning to influence present and future directions for non-traditional ceramic processing, thus affecting many of the advanced ceramic materials needed for a wide variety of research and industrial applications. The number, the importance and the application of new ceramic processing techniques have expanded considerably during the last ten years.
Book Synopsis An Evaluation of High Energy Ion Implantation for Wear Studies by : Todd L. Rachel
Download or read book An Evaluation of High Energy Ion Implantation for Wear Studies written by Todd L. Rachel and published by . This book was released on 1991 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Ion Implantation 1988 by : F. H. Wöhlbier
Download or read book Ion Implantation 1988 written by F. H. Wöhlbier and published by . This book was released on 1988 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume presents 24 invited contributions.
Book Synopsis Mechanical Properties of Ion Implanted Ceramic Surfaces by : P. J. Burnett
Download or read book Mechanical Properties of Ion Implanted Ceramic Surfaces written by P. J. Burnett and published by . This book was released on 1985 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Surfaces and Interfaces of Ceramic Materials by : L.C. Dufour
Download or read book Surfaces and Interfaces of Ceramic Materials written by L.C. Dufour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.
Book Synopsis Ion Implantation Into Metals by : V. Ashworth
Download or read book Ion Implantation Into Metals written by V. Ashworth and published by Elsevier. This book was released on 2016-04-20 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Implantation into Metals presents the proceedings of the 3rd International Conference on the Modification of Surface Properties of Metals by Ion Implantation, held at UMIST, Manchester, UK on June 23-26, 1981. The book includes papers on aqueous corrosion of ion-implanted iron; the mechanical properties and high temperature oxidation behavior in aqueous corrosion; and the potential of ion beam processing in this field of materials science and engineering. The text also presents papers on the important scientific progress in metal physics and related subjects.
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Deformation of Ceramic Materials II by : Richard E. Tressler
Download or read book Deformation of Ceramic Materials II written by Richard E. Tressler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume "Deformation of Ceramic Materials II" constitutes the proceedings of an international symposium held at The Pennsyl vania State University, University Park, PA on July 20, 21, and 22, 1983. It includes studies of semiconductors and minerals which are closely related to ceramic materials. The initial conference on this topic was held in 1974 at Penn State and the proceedings were published in the volume entitled "Deformation of Ceramic Materials." This conference emphasized the deformation behavior of crystals and po1ycrysta11ine and polyphase ceramics with internationally recognized authorities as keynote lecturers on the major subtopics. Several papers dealing with cavity nucleation and creep crack growth represent a major new research thrust in ceramics since the first conference. This collection of papers represents the state-of-the art of our understanding of the plastic deformation behavior of ceramics and the crystals of which they are composed. We are grateful for the suggestions of our International Advisory Committee .in recommending experts in their respective countries to participate. We are particularly grateful that the organizers of the previous Dislocation-Point Defect Interaction Workshops agreed to participate in the Penn State Symposium as an alternative at the suggestion of Prof. A. H. Heuer. We acknowledge the financial support of the National Science Foundation for this conference.
Book Synopsis Engineering Thin Films and Nanostructures with Ion Beams by : Emile Knystautas
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Book Synopsis Plastic Deformation of Ceramics by : R.C. Bradt
Download or read book Plastic Deformation of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume, "Plastic Deformation of Ceramics," constitutes the papers of an international symposium held at Snowbird, Utah from August 7-12, 1994. It was attended by nearly 100 scientists and engineers from more than a dozen countries representing academia, national laboratories, and industry. Two previous conferences on this topic were held at The Pennsylvania State University in 1974 and 1983. Therefore, the last major international conference focusing on the deformation of ceramic materials was held more than a decade ago. Since the early 1980s, ceramic materials have progressed through an evolutionary period of development and advancement. They are now under consideration for applications in engineering structures. The contents of the previous conferences indicate that considerable effort was directed towards a basic understanding of deformation processes in covalently bonded or simple oxide ceramics. However, now, more than a decade later, the focus has completely shifted. In particular, the drive for more efficient heat engines has resulted in the development of silicon-based ceramics and composite ceramics. The discovery of high-temperature cupric oxide-based superconductors has created a plethora of interesting perovskite-Iike structured ceramics. Additionally, nanophase ceramics, ceramic thin films, and various forms of toughened ceramics have potential applications and, hence, their deformation has been investigated. Finally, new and exciting areas of research have attracted interest since 1983, including fatigue, nanoindentation techniques, and superplasticity.
Book Synopsis Concise Encyclopedia of Advanced Ceramic Materials by : R.J. Brook
Download or read book Concise Encyclopedia of Advanced Ceramic Materials written by R.J. Brook and published by Elsevier. This book was released on 2012-12-02 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ceramics cover a wide range of materials which are ceramic by nature but have been developed in response to specific requirements. This encyclopedia collects together 137 articles in order to provide an up-to-date account of the advanced ceramic field. Some articles are drawn from the acclaimed Encyclopedia of Materials Science and Engineering, often revised, and others have been newly commissioned. The Concise Encyclopedia of Advanced Ceramic Materials aims to provide a comprehensive selection of accessible articles which act as an authoritative guide to the subject. The format is designed to help the readers form opinions on a particular subject. Arranged alphabetically, with a broad subject range, the articles are diverse in character and style, thereby stimulating further discussion. Topics covered include survey articles on glass, hot pressing, insulators, powders, and many are concerned with specific chemical systems and their origins, processing and applications. The Concise Encyclopedia of Advanced Ceramic Materials will be invaluable to materials scientists, researchers, educators and industrialists working in technical ceramics.
Book Synopsis Mechanical Properties of Ceramics by : Joshua Pelleg
Download or read book Mechanical Properties of Ceramics written by Joshua Pelleg and published by Springer Science & Business. This book was released on 2014-04-22 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the mechanical properties of ceramics and aims to provide both a solid background for undergraduate students, as well as serving as a text to bring practicing engineers up to date with the latest developments in this topic so they can use and apply these to their actual engineering work. Generally, ceramics are made by moistening a mixture of clays, casting it into desired shapes and then firing it to a high temperature, a process known as 'vitrification'. The relatively late development of metallurgy was contingent on the availability of ceramics and the know-how to mold them into the appropriate forms. Because of the characteristics of ceramics, they offer great advantages over metals in specific applications in which hardness, wear resistance and chemical stability at high temperatures are essential. Clearly, modern ceramics manufacturing has come a long way from the early clay-processing fabrication method, and the last two decades have seen the development of sophisticated techniques to produce a large variety of ceramic material. The chapters of this volume are ordered to help students with their laboratory experiments and guide their observations in parallel with lectures based on the current text. Thus, the first chapter is devoted to mechanical testing. A chapter of ductile and superplastic ceramic is added to emphasize their role in modern ceramics (chapter 2). These are followed by the theoretical basis of the subject. Various aspects of the mechanical properties are discussed in the following chapters, among them, strengthening mechanisms, time dependent and cyclic deformation of ceramics. Many practical illustrations are provided representing various observations encountered in actual ceramic-structures of particularly technical significance. A comprehensive list of references at the end of each chapter is included in this textbook to provide a broad basis for further studying the subject. The work also contains a unique chapter on a topic not discussed in other textbooks on ceramics concerning nanosized ceramics. This work will also be useful as a reference for materials scientists, not only to those who specialize in ceramics.
Book Synopsis Structure-Property Relationships in Surface-Modified Ceramics by : C.J. McHargue
Download or read book Structure-Property Relationships in Surface-Modified Ceramics written by C.J. McHargue and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of ion beams for the modification of the structure and properties of the near-surface region of ceramics began in earnest in the early 19805. Since the mechanical properties of such materials are dominated by surface flaws and the surface stress state, the use of surface modification tech niques would appear to be an obvious application. As is often the case in research and development, most of the initial studies can be characterized as cataloging the response of various ceramic materials to a range of ion beam treatments. The systematic study of material and ion beam parameters is well underway and we are now designing experiments to provide specific information about the processing parameter - structure-property rela tionships. This NATO-Advanced Study Institute was convened in order to assess our current state of knowledge in this field, to identify opportunities and needs for further research, and to identify the potential of such processes for technological application. It became apparent that this class of inorganic compounds, loosely termed ceramics, presents many challenges to the understanding of ion-solid inter actions, the relationships among ion-beam parameters, materials parameters, and the resulting structures, as well as relationships between structure and properties. In many instances, this understanding will represent a major extension of that learned from the study of metals and semiconductors.
Download or read book High-performance Ceramics written by and published by . This book was released on 2005 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis The Mechanical and Tribological Properties of Ion Implanted Ceramics by : Stephen John Bull
Download or read book The Mechanical and Tribological Properties of Ion Implanted Ceramics written by Stephen John Bull and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Metal and Ceramic Biomaterials by : Ducheyne
Download or read book Metal and Ceramic Biomaterials written by Ducheyne and published by CRC Press. This book was released on 2018-01-18 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The understanding of the in vivo performance of synthetic materials is largely dependent upon a profound knowledge of the properties of the materials in question. Analogous to materials science in its broadest sense, the basis for biomaterials science is formed by microstructural there. It is therefore, that in this series on structure property relationships in biomaterials a substantial part is devoted to the analysis of the basic properties of the various synthetic biomaterials. In addition, the effect of microstructural aspects on properties is considered at great length.
