Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Gas Flow Tightly Coupled To Elastoplastic Geomechanics For Tight And Shale Gas Reservoirs
Download Gas Flow Tightly Coupled To Elastoplastic Geomechanics For Tight And Shale Gas Reservoirs full books in PDF, epub, and Kindle. Read online Gas Flow Tightly Coupled To Elastoplastic Geomechanics For Tight And Shale Gas Reservoirs ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Emerging Issues in Groundwater Resources by : Ali Fares
Download or read book Emerging Issues in Groundwater Resources written by Ali Fares and published by Springer. This book was released on 2016-08-11 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses how emerging groundwater risks under current and potential climate change conductions reduce available groundwater resources for domestic use, and agriculture and energy production. The topics discussed throughout this book are grouped into five sections; (i) Sea Level Rise, Climate Change, and Food Security, (ii) Emerging Contaminants, (iii) Technologies and Decision Support Systems, (iv) Surface Water-Groundwater Interactions, and (v) Economics, and Energy Production and Development. This book is unique and different from other groundwater hydrology books in that it uses a holistic approach in investigating the risks related to groundwater resources. This book will be of interest to a wide audience in academia, governmental and non-governmental organizations, and environmental entities. This book will greatly contribute to a better understanding of the emerging risks to groundwater resources and should help responsible stakeholders make informed decisions in this regard.
Book Synopsis The Effects of Induced Hydraulic Fracturing on the Environment by : Matthew McBroom
Download or read book The Effects of Induced Hydraulic Fracturing on the Environment written by Matthew McBroom and published by CRC Press. This book was released on 2013-12-07 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title includes a number of Open Access chapters.Hydraulic fracturing, or "fracking" as it is commonly known, refers to the practice of using liquids at very high pressures to fragment rock, thereby allowing natural gas to be harvested. This process increases energy resources but also has some negative environmental impacts as well. This book l
Book Synopsis Groundwater Assessment, Modeling, and Management by : M. Thangarajan
Download or read book Groundwater Assessment, Modeling, and Management written by M. Thangarajan and published by CRC Press. This book was released on 2016-09-15 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your Guide to Effective Groundwater Management Groundwater Assessment, Modeling, and Management discusses a variety of groundwater problems and outlines the solutions needed to sustain surface and ground water resources on a global scale. Contributors from around the world lend their expertise and provide an international perspective on groundwater management. They address the management of groundwater resources and pollution, waste water treatment methods, and the impact of climate change on groundwater and water availability (specifically in arid and semi-arid regions such as India and Africa). Incorporating management with science and modeling, the book covers all areas of groundwater resource assessment, modeling, and management, and combines hands-on applications with relevant theory. For Water Resource Managers and Decision Makers The book describes techniques for the assessment of groundwater potential, pollution, prevention, and remedial measures, and includes a new approach for groundwater modeling based on connections (network theory). Approximately 30 case studies and six hypothetical studies are introduced reflecting a range of themes that include: groundwater basics and the derivation of groundwater flow equations, exploration and assessment, aquifer parameterization, augmentation of aquifer, water and environment, water and agriculture, the role of models and their application, and water management policies and issues. The book describes remote sensing (RS) applications, geographical information systems (GIS), and electrical resistivity methods to delineate groundwater potential zones. It also takes a look at: Inverse modeling (pilot-points method) Simulation optimization models Radionuclide migration studies through mass transport modeling Modeling for mapping groundwater potential Modeling for vertical 2-D and 3-D groundwater flow Groundwater Assessment, Modeling, and Management explores the management of water resources and the impact of climate change on groundwater. Expert contributors provide practical information on hydrologic engineering and groundwater resources management for students, researchers, scientists, and other practicing professionals in environmental engineering, hydrogeology, irrigation, geophysics, and environmental science.
Book Synopsis Geological Carbon Storage by : Stéphanie Vialle
Download or read book Geological Carbon Storage written by Stéphanie Vialle and published by John Wiley & Sons. This book was released on 2018-11-12 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological Carbon Storage Subsurface Seals and Caprock Integrity Seals and caprocks are an essential component of subsurface hydrogeological systems, guiding the movement and entrapment of hydrocarbon and other fluids. Geological Carbon Storage: Subsurface Seals and Caprock Integrity offers a survey of the wealth of recent scientific work on caprock integrity with a focus on the geological controls of permanent and safe carbon dioxide storage, and the commercial deployment of geological carbon storage. Volume highlights include: Low-permeability rock characterization from the pore scale to the core scale Flow and transport properties of low-permeability rocks Fundamentals of fracture generation, self-healing, and permeability Coupled geochemical, transport and geomechanical processes in caprock Analysis of caprock behavior from natural analogues Geochemical and geophysical monitoring techniques of caprock failure and integrity Potential environmental impacts of carbon dioxide migration on groundwater resources Carbon dioxide leakage mitigation and remediation techniques Geological Carbon Storage: Subsurface Seals and Caprock Integrity is an invaluable resource for geoscientists from academic and research institutions with interests in energy and environment-related problems, as well as professionals in the field.
Book Synopsis Unconventional Reservoir Geomechanics by : Mark D. Zoback
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Book Synopsis Geomechanical Studies of the Barnett Shale, Texas, USA by : John Peter Vermylen
Download or read book Geomechanical Studies of the Barnett Shale, Texas, USA written by John Peter Vermylen and published by Stanford University. This book was released on 2011 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents five studies of a gas shale reservoir using diverse methodologies to investigate geomechanical and transport properties that are important across the full reservoir lifecycle. Using the Barnett shale as a case study, we investigated adsorption, permeability, geomechanics, microseismicity, and stress evolution in two different study areas. The main goals of this thesis can be divided into two parts: first, to investigate how flow properties evolve with changes in stress and gas species, and second, to understand how the interactions between stress, fractures, and microseismicity control the creation of a permeable reservoir volume during hydraulic fracturing. In Chapter 2, we present results from adsorption and permeability experiments conducted on Barnett shale rock samples. We found Langmuir-type adsorption of CH4 and N2 at magnitudes consistent with previous studies of the Barnett shale. Three of our samples demonstrated BET-type adsorption of CO2, in contrast to all previous studies on CO2 adsorption in gas shales, which found Langmuir-adsorption. At low pressures (600 psi), we found preferential adsorption of CO2 over CH4 ranging from 3.6x to 5.5x. While our measurements were conducted at low pressures (up to 1500 psi), when our model fits are extrapolated to reservoir pressures they reach similar adsorption magnitudes as have been found in previous studies. At these high reservoir pressures, the very large preferential adsorption of CO2 over CH4 (up to 5-10x) suggests a significant potential for CO2 storage in gas shales like the Barnett if practical problems of injectivity and matrix transport can be overcome. We successfully measured permeability versus effective stress on two intact Barnett shale samples. We measured permeability effective stress coefficients less than 1 on both samples, invalidating our hypothesis that there might be throughgoing flow paths within the soft, porous organic kerogen that would lead the permeability effective stress coefficient to be greater than 1. The results suggest that microcracks are likely the dominant flow paths at these scales. In Chapter 3, we present integrated geological, geophysical, and geomechanical data in order to characterize the rock properties in our Barnett shale study area and to model the stress state in the reservoir before hydraulic fracturing occurred. Five parallel, horizontal wells were drilled in the study area and then fractured using three different techniques. We used the well logs from a vertical pilot well and a horizontal well to constrain the stress state in the reservoir. While there was some variation along the length of the well, we were able to determine a best fit stress state of Pp = 0.48 psi/ft, Sv = 1.1 psi/ft, SHmax = 0.73 psi/ft, and Shmin = 0.68 psi/ft. Applying this stress state to the mapped natural fractures indicates that there is significant potential for induced shear slip on natural fracture planes in this region of the Barnett, particularly close to the main hydraulic fracture where the pore pressure increase during hydraulic fracturing is likely to be very high. In Chapter 4, we present new techniques to quantify the robustness of hydraulic fracturing in gas shale reservoirs. The case study we analyzed involves five parallel horizontal wells in the Barnett shale with 51 frac stages. To investigate the numbers, sizes, and types of microearthquakes initiated during each frac stage, we created Gutenberg-Richter-type magnitude distribution plots to see if the size of events follows the characteristic scaling relationship found in natural earthquakes. We found that slickwater fracturing does generate a log-linear distribution of microearthquakes, but that it creates proportionally more small events than natural earthquake sources. Finding considerable variability in the generation of microearthquakes, we used the magnitude analysis as a proxy for the "robustness" of the stimulation of a given stage. We found that the conventionally fractured well and the two alternately fractured wells ("zipperfracs") were more effective than the simultaneously fractured wells ("simulfracs") in generating microearthquakes. We also found that the later stages of fracturing a given well were more successful in generating microearthquakes than the early stages. In Chapter 5, we present estimates of stress evolution in our study reservoir through analysis of the instantaneous shut-in pressure (ISIP) at the end of each stage. The ISIP increased stage by stage for all wells, but the simulfrac wells showed the greatest increase and the zipperfrac wells the least. We modeled the stress increase in the reservoir with a simple sequence of 2-D cracks along the length of the well. When using a spacing of one crack per stage, the modeled stress increase was nearly identical to the measured stress increase in the zipperfrac wells. When using three cracks per stage, the modeled final stage stress magnitude matched the measured final stage stress magnitude from the simulfrac wells, but the rate of stress increase in the simulfrac wells was much more gradual than the model predicted. To further investigate the causes of these ISIP trends, we began numerical flow and stress analysis to more realistically model the processes in the reservoir. One of our hypotheses was that the shorter total time needed to complete all the stages of the simulfrac wells was the cause of the greater ISIP increase compared to the zipperfrac wells. The microseismic activity level measured in Chapter 4 also correlates with total length of injection, suggesting leak off into the reservoir encouraged shear failure. Numerical modeling using the coupled FEM and flow software GEOSIM was able to model some cumulative stress increase the reservoir, but the full trend was not replicated. Further work to model field observations of hydraulic fracturing will enhance our understanding of the impact that hydraulic fracturing and stress change have on fracture creation and permeability enhancement in gas shales.
Book Synopsis Mechanics of Porous Continua by : Olivier Coussy
Download or read book Mechanics of Porous Continua written by Olivier Coussy and published by Wiley. This book was released on 1995-12-05 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified and systematic continuum approach for engineers and applied physicists working on the modelling of porous media. Self-contained, it sets out—from a macroscopic point of view—the main concepts and results of deformable porous media subject to the flow of one or several fluids. The theory presented includes developments in the areas of thermodynamics, poroelastoplasticity, poroviscoplasticity, wave propagation and surfaces of discontinuity, boundary value problems and numerical methods, as well as chemico-mechanical couplings. It can be used for numerous diversified applications in geophysics, civil engineering, biomechanics, material science, etc.
Book Synopsis Petroleum Rock Mechanics by : Bernt S. Aadnoy
Download or read book Petroleum Rock Mechanics written by Bernt S. Aadnoy and published by Gulf Professional Publishing. This book was released on 2019-06-15 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Rock Mechanics: Drilling Operations and Well Design, Second Edition, keeps petroleum and drilling engineers centrally focused on the basic fundamentals surrounding geomechanics, while also keeping them up-to-speed on the latest issues and practical problems. Updated with new chapters on operations surrounding shale oil, shale gas, and hydraulic fracturing, and with new sections on in-situ stress, drilling design of optimal mud weight, and wellbore instability analysis, this book is an ideal resource. By creating a link between theory with practical problems, this updated edition continues to provide the most recent research and fundamentals critical to today's drilling operations. - Helps readers grasp the techniques needed to analyze and solve drilling challenges, in particular wellbore instability analysis - Teaches rock mechanic fundamentals and presents new concepts surrounding sand production and hydraulic fracturing operations - Includes new case studies and sample problems to practice
Book Synopsis Energy Geotechnics by : Alessio Ferrari
Download or read book Energy Geotechnics written by Alessio Ferrari and published by Springer. This book was released on 2018-08-23 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected full papers presented at the International Symposium on Energy Geotechnics 2018 (SEG-2018), held on 25th – 28th September 2018, at the Swiss Federal Institute of Technology in Lausanne (EPFL). It covers a wide range of topics in energy geotechnics, including energy geostructures, energy geostorage, thermo-hydro-chemo-mechanical behaviour of geomaterials, unconventional resources, hydraulic stimulation, induced seismicity, CO2 geological storage, and nuclear waste disposal as well as topics such as tower and offshore foundations. The book is intended for postgraduate students, researchers and practitioners working on geomechanics and geotechnical engineering for energy-related applications.
Book Synopsis Geomechanics and Geology by : J.P. Turner
Download or read book Geomechanics and Geology written by J.P. Turner and published by Geological Society of London. This book was released on 2017-09-19 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics investigates the origin, magnitude and deformational consequences of stresses in the crust. In recent years awareness of geomechanical processes has been heightened by societal debates on fracking, human-induced seismicity, natural geohazards and safety issues with respect to petroleum exploration drilling, carbon sequestration and radioactive waste disposal. This volume explores the common ground linking geomechanics with inter alia economic and petroleum geology, structural geology, petrophysics, seismology, geotechnics, reservoir engineering and production technology. Geomechanics is a rapidly developing field that brings together a broad range of subsurface professionals seeking to use their expertise to solve current challenges in applied and fundamental geoscience. A rich diversity of case studies herein showcase applications of geomechanics to hydrocarbon exploration and field development, natural and artificial geohazards, reservoir stimulation, contemporary tectonics and subsurface fluid flow. These papers provide a representative snapshot of the exciting state of geomechanics and establish it firmly as a flourishing subdiscipline of geology that merits broadest exposure across the academic and corporate geosciences.
Book Synopsis Underground Gas Storage by : D. J. Evans
Download or read book Underground Gas Storage written by D. J. Evans and published by Geological Society of London. This book was released on 2009 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The UK became a net importer of natural gas in 2004 and by 2020 will import up to 90% of its requirements, leaving it vulnerable to increasing energy bills and risk of disruption to supply. New pipelines to Europe and improvements to interconnectors will meet some demand, but Government recognises the need for increased gas storage capacity: best met by the construction of underground storage facilities. Energy security has also raised the likelihood of a new generation of coal-fired power-stations, which to be environmentally viable, will require clean-coal technologies with near-zero greenhouse gas emissions. A key element of this strategy will be underground CO2 storage. This volume reviews the technologies and issues involved in the underground storage of natural gas and CO2, with examples from the UK and overseas. The potential for underground storage of other gases such as hydrogen, or compressed air linked to renewable sources is also reviewed.
Book Synopsis Plasticity Theory by : Jacob Lubliner
Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.
Book Synopsis Well Completion Design by : Jonathan Bellarby
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Book Synopsis Geotechnical Engineering for Transportation Projects by : American Society of Civil Engineers. Geo-Institute
Download or read book Geotechnical Engineering for Transportation Projects written by American Society of Civil Engineers. Geo-Institute and published by . This book was released on 2004 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 126 contains 223 papers presented at Geo-Trans 2004, held in Los Angeles, California, July 27-31, 2004.
Book Synopsis Engineering Geology for Underground Rocks by : Suping Peng
Download or read book Engineering Geology for Underground Rocks written by Suping Peng and published by Springer Science & Business Media. This book was released on 2007-10-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals and students in any geology-related field will find this an essential reference. It clearly and systematically explains underground engineering geology principles, methods, theories and case studies. The authors lay out engineering problems in underground rock engineering and how to study and solve them. The book specially emphasizes mechanical and hydraulic couplings in rock engineering for wellbore stability, mining near aquifers and other underground structures where inflow is a problem.
Book Synopsis Lost Circulation and Wellbore Strengthening by : Yongcun Feng
Download or read book Lost Circulation and Wellbore Strengthening written by Yongcun Feng and published by Springer. This book was released on 2018-05-01 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the underlying mechanisms of lost circulation and wellbore strengthening, presenting a comprehensive, yet concise, overview of the fundamental studies on lost circulation and wellbore strengthening in the oil and gas industry, as well as a detailed discussion on the limitations of the wellbore strengthening methods currently used in industry. It provides several advanced analytical and numerical models for lost circulation and wellbore strengthening simulations under realistic conditions, as well as their results to illustrate the capabilities of the models and to investigate the influences of key parameters. In addition, experimental results are provided for a better understanding of the subject. The book provides useful information for drilling and completion engineers wishing to solve the problem of lost circulation using wellbore strengthening techniques. It is also a valuable resource for industrial researchers and graduate students pursuing fundamental research on lost circulation and wellbore strengthening, and can be used as a supplementary reference for college courses, such as drilling and completion engineering and petroleum geomechanics.
Download or read book Petrophysics written by Erle C. Donaldson and published by Elsevier. This book was released on 2004-01-24 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum geologist and engineer must have a working knowledge of petrophysics in order to find oil reservoirs, devise the best plan for getting it out of the ground, then start drilling. This book offers the engineer and geologist a manual to accomplish these goals, providing much-needed calculations and formulas on fluid flow, rock properties, and many other topics that are encountered every day. New updated material covers topics that have emerged in the petrochemical industry since 1997. - Contains information and calculations that the engineer or geologist must use in daily activities to find oil and devise a plan to get it out of the ground - Filled with problems and solutions, perfect for use in undergraduate, graduate, or professional courses - Covers real-life problems and cases for the practicing engineer
