Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Fluid Mechanics And Heat Transfer Research Related To High Temperature Gas Turbines
Download Fluid Mechanics And Heat Transfer Research Related To High Temperature Gas Turbines full books in PDF, epub, and Kindle. Read online Fluid Mechanics And Heat Transfer Research Related To High Temperature Gas Turbines ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Fluid Mechanics and Heat Transfer Research Related to High Temperature Gas Turbines by :
Download or read book Fluid Mechanics and Heat Transfer Research Related to High Temperature Gas Turbines written by and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the research was to enhance the understanding of airfoil passage transport processes and film cooling by conducting a coordinated experimental and computational study of flow behavior and airfoil and end-wall surface heat transfer as influenced by turbulence and more coherent structures in the passage flow, streamline curvature, and other effects. Computation is used to evaluate and develop film cooling schemes, as well as to extend by analysis the experience base beyond the experimental cases investigated. The outcome of the research will be improved physical understanding and computational models of these processes, both of which are of direct utility to the engine designers in the aircraft industry. The research project finds a number of innovative features. They include: (a) detailed local heat (mass) transfer measurements on turbine blade surfaces, (b) investigation of the mass transfer and turbulent characteristics in curved channel flows, (c) determination of local film cooling effectiveness in endwall film cooling and total-coverage discrete hole wall cooling, (d) evaluation of a fence for endwall flow control, and (e) accurate numerical modeling in film cooling.
Book Synopsis Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists by : Meinhard T. Schobeiri
Download or read book Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists written by Meinhard T. Schobeiri and published by Springer Nature. This book was released on 2022-01-17 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book, Advanced Fluid Mechanics and Heat Transfer is based on author's four decades of industrial and academic research in the area of thermofluid sciences including fluid mechanics, aero-thermodynamics, heat transfer and their applications to engineering systems. Fluid mechanics and heat transfer are inextricably intertwined and both are two integral parts of one physical discipline. No problem from fluid mechanics that requires the calculation of the temperature can be solved using the system of Navier-Stokes and continuity equations only. Conversely, no heat transfer problem can be solved using the energy equation only without using the Navier-Stokes and continuity equations. The fact that there is no book treating this physical discipline as a unified subject in a single book that considers the need of the engineering and physics community, motivated the author to write this book. It is primarily aimed at students of engineering, physics and those practicing professionals who perform aero-thermo-heat transfer design tasks in the industry and would like to deepen their knowledge in this area. The contents of this new book covers the material required in Fluid Mechanics and Heat Transfer Graduate Core Courses in the US universities. It also covers the major parts of the Ph.D-level elective courses Advanced Fluid Mechanics and Heat Transfer that the author has been teaching at Texas A&M University for the past three decades.
Book Synopsis Fundamental Heat Transfer Research for Gas Turbine Engines by :
Download or read book Fundamental Heat Transfer Research for Gas Turbine Engines written by and published by . This book was released on 1980 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Emerging Topics in Heat Transfer by : Qiuwang Wang
Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.
Book Synopsis Heat Transfer in Gas Turbines by : Bengt Sundén
Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.
Book Synopsis Gas Turbine Heat Transfer and Cooling Technology, Second Edition by : Je-Chin Han
Download or read book Gas Turbine Heat Transfer and Cooling Technology, Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Book Synopsis Heat Transfer in Aerospace Applications by : Bengt Sundén
Download or read book Heat Transfer in Aerospace Applications written by Bengt Sundén and published by Academic Press. This book was released on 2016-10-19 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer in Aerospace Applications is the first book to provide an overall description of various heat transfer issues of relevance for aerospace applications. The book contains chapters relating to convection cooling, heat pipes, ablation, heat transfer at high velocity, low pressure and microgravity, aircraft heat exchangers, fuel cells, and cryogenic cooling systems. Chapters specific to low density heat transfer (4) and microgravity heat transfer (9) are newer subjects which have not been previously covered. The book takes a basic engineering approach by including correlations and examples that an engineer needs during the initial phases of vehicle design or to quickly analyze and solve a specific problem. Designed for mechanical, chemical, and aerospace engineers in research institutes, companies, and consulting firms, this book is an invaluable resource for the latest on aerospace heat transfer engineering and research. Provides an overall description of heat transfer issues of relevance for aerospace applications Discusses why thermal problems arise and introduces the various heat transfer modes Helps solve the problem of selecting and calculating the cooling system, the heat exchanger, and heat protection Features a collection of problems in which the methods presented in the book can be used to solve these problems
Book Synopsis Combustion and Heat Transfer in Gas Turbine Systems by : E. R. Norster
Download or read book Combustion and Heat Transfer in Gas Turbine Systems written by E. R. Norster and published by Elsevier. This book was released on 2013-10-22 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion and Heat Transfer in Gas Turbine Systems is a compilation of papers from the Proceedings of an International Propulsion Symposium held at the College of Aeronautics, Cranfield in April 1969. This compilation deals with research done by academic and scientific institutions and of industrial organizations, with some research papers covering atomization, fuels, and high-temperature materials. One paper describes the combustion system of the Concorde engine used in commercial flights, temperature of metal parts, and some design modifications to increase the mechanical life of the combustion system. Another paper discusses the evolution of the RB 162 combustion system that is used in the vertical takeoff and landing aircrafts. The RB 162 has many design features of the earlier single reversal chamber and differs in only one or two points. The book then notes the necessity of a plenum chamber burning to further development of supersonic engines and flight. One paper also proposes an alternative theory to the traditional ignition theory of altitude relighting such as those developed by Lewis and von Elbe. Another paper reposts on some observations made of the atomizing characteristics of air-blast atomizers and proposes simple changes to improve the performance of the atomizer by prefilming and allowing air to both sides of the fuel. This compilation will prove very helpful for aeronautical engineers, aviation designers, physicists, students of engineering, and readers who are interested in the design and development of jet engines and supersonic aircrafts.
Book Synopsis Proceedings of the Heat Transfer and Fluid Mechanics Institute by : Heat Transfer and Fluid Mechanics Institute
Download or read book Proceedings of the Heat Transfer and Fluid Mechanics Institute written by Heat Transfer and Fluid Mechanics Institute and published by . This book was released on 1995 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbines written by Bijay Sultanian and published by Cambridge University Press. This book was released on 2018-09-13 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This physics-first, design-oriented textbook explains concepts of gas turbine secondary flows, reduced-order modeling methods, and 3-D CFD.
Book Synopsis Fluid Dynamics and Heat Transfer of Turbomachinery by : Budugur Lakshminarayana
Download or read book Fluid Dynamics and Heat Transfer of Turbomachinery written by Budugur Lakshminarayana and published by John Wiley & Sons. This book was released on 1995-12-15 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past three decades, information in the aerospace and mechanical engineering fields in general and turbomachinery in particular has grown at an exponential rate. Fluid Dynamics and Heat Transfer of Turbomachinery is the first book, in one complete volume, to bring together the modern approaches and advances in the field, providing the most up-to-date, unified treatment available on basic principles, physical aspects of the aerothermal field, analysis, performance, theory, and computation of turbomachinery flow and heat transfer. Presenting a unified approach to turbomachinery fluid dynamics and aerothermodynamics, the book concentrates on the fluid dynamic aspects of flows and thermodynamic considerations rather than on those related to materials, structure, or mechanical aspects. It covers the latest material and all types of turbomachinery used in modern-day aircraft, automotive, marine, spacecraft, power, and industrial applications; and there is an entire chapter devoted to modern approaches on computation of turbomachinery flow. An additional chapter on turbine cooling and heat transfer is unique for a turbomachinery book. The author has undertaken a systematic approach, through more than three hundred illustrations, in developing the knowledge base. He uses analysis and data correlation in his discussion of most recent developments in this area, drawn from over nine hundred references and from research projects carried out by various organizations in the United States and abroad. This book is extremely useful for anyone involved in the analysis, design, and testing of turbomachinery. For students, it can be used as a two-semester course of senior undergraduate or graduate study: the first semester dealing with the basic principles and analysis of turbomachinery, the second exploring three-dimensional viscid flows, computation, and heat transfer. Many sections are quite general and applicable to other areas in fluid dynamics and heat transfer. The book can also be used as a self-study guide to those who want to acquire this knowledge. The ordered, meticulous, and unified approach of Fluid Dynamics and Heat Transfer of Turbomachinery should make the specialization of turbomachinery in aerospace and mechanical engineering much more accessible to students and professionals alike, in universities, industry, and government. Turbomachinery theory, performance, and analysis made accessible with a new, unified approach For the first time in nearly three decades, here is a completely up-to-date and unified approach to turbomachinery fluid dynamics and aerothermodynamics. Combining the latest advances, methods, and approaches in the field, Fluid Dynamics and Heat Transfer of Turbomachinery features: The most comprehensive and complete coverage of the fluid dynamics and aerothermodynamics of turbomachinery to date A spotlight on the fluid dynamic aspects of flows and the thermodynamic considerations for turbomachinery (rather than the structural or material aspects) A detailed, step-by-step presentation of the analytical and computational models involved, which allows the reader to easily construct a flowchart from which to operate Critical reviews of all the existing analytical and numerical models, highlighting the advantages and drawbacks of each Comprehensive coverage of turbine cooling and heat transfer, a unique feature for a book on turbomachinery An appendix of basic computation techniques, numerous tables, and listings of common terminology, abbreviations, and nomenclature Broad in scope, yet concise, and drawing on the author's teaching experience and research projects for government and industry, Fluid Dynamics and Heat Transfer of Turbomachinery explains and simplifies an increasingly complex field. It is an invaluable resource for undergraduate and graduate students in aerospace and mechanical engineering specializing in turbomachinery, for research and design engineers, and for all professionals who are—or wish to be—at the cutting edge of this technology.
Book Synopsis Fluid Mechanics and Heat Transfer for Gases (air, He, H2 and N2) Flowing Single Phase in Closed Channels by : Rose Kraft
Download or read book Fluid Mechanics and Heat Transfer for Gases (air, He, H2 and N2) Flowing Single Phase in Closed Channels written by Rose Kraft and published by . This book was released on 1962 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Thermal Engineering in Power Systems by : Ryoichi Amano
Download or read book Thermal Engineering in Power Systems written by Ryoichi Amano and published by WIT Press. This book was released on 2008 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development in thermal engineering for power systems are of significant importance to many scientists who are engaged in research and design work in power-related industries and laboratories. This book focuses on variety of research areas including Components of Compressor and Turbines that are used for both electric power systems and aero engines, Fuel Cells, Energy Conversion, and Energy Reuse and Recycling Systems. To be competitive in today's market, power systems need to reduce the operating costs, increase capacity factors and deal with many other tough issues. Heat Transfer and fluid flow issues are of great significance and it is likely that a state-of-the-art edited book with reference to power systems will make a contribution for design and R&D engineers and the development towards sustainable energy systems.
Book Synopsis Heat Transfer in Turbomachinery by : Richard J. Goldstein
Download or read book Heat Transfer in Turbomachinery written by Richard J. Goldstein and published by Begell House Publishers. This book was released on 1994-03-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of 40 papers that highlight many of the problems and results of recent studies related to heat transfer in the development of high temperature gas turbines.
Book Synopsis Basic Aspects of Gas Turbine Heat Transfer by : Shailendra Naik
Download or read book Basic Aspects of Gas Turbine Heat Transfer written by Shailendra Naik and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of gas turbines for power generation and electricity production in both single cycle and combined cycle plant operation is extensive and will continue to globally grow into the future. Due to its high power density and ability to convert gaseous and liquid fuel into mechanical work with very high thermodynamic efficiencies, significant efforts continue today to further increase both the power output and thermodynamic efficiencies of the gas turbine. In particular, the aerothermal design of gas turbine components has progressed at a rapid pace in the last decade with all gas turbine manufacturers, in order to achieve higher thermodynamic efficiencies. This has been achieved by using higher turbine inlet temperatures and pressures, advanced turbine aerodynamics and efficient cooling systems of turbine airofoils, and advanced high temperature alloys, metallic coatings, and ceramic thermal barrier coatings. In this chapter, issues related to the thermal design of gas turbine blades are highlighted and several heat transfer technologies are examined, such as convective cooling, impingement cooling, film cooling, and application of thermal barrier coatings. Typical methods for validating the thermal designs of gas turbine airofoils are also outlined.
Book Synopsis Heat Transfer and Fluid Flow in Rotating Machinery by : Wen-Jei Yang
Download or read book Heat Transfer and Fluid Flow in Rotating Machinery written by Wen-Jei Yang and published by Springer. This book was released on 1987 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Flow and Combustion in Advanced Gas Turbine Combustors by : Johannes Janicka
Download or read book Flow and Combustion in Advanced Gas Turbine Combustors written by Johannes Janicka and published by Springer Science & Business Media. This book was released on 2012-10-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: With regard to both the environmental sustainability and operating efficiency demands, modern combustion research has to face two main objectives, the optimization of combustion efficiency and the reduction of pollutants. This book reports on the combustion research activities carried out within the Collaborative Research Center (SFB) 568 “Flow and Combustion in Future Gas Turbine Combustion Chambers” funded by the German Research Foundation (DFG). This aimed at designing a completely integrated modeling and numerical simulation of the occurring very complex, coupled and interacting physico-chemical processes, such as turbulent heat and mass transport, single or multi-phase flows phenomena, chemical reactions/combustion and radiation, able to support the development of advanced gas turbine chamber concepts
