Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Feasibility Study Of Laser Ablation Using Long Pulsed 300w Cw Single Mode Fiber Laser
Download Feasibility Study Of Laser Ablation Using Long Pulsed 300w Cw Single Mode Fiber Laser full books in PDF, epub, and Kindle. Read online Feasibility Study Of Laser Ablation Using Long Pulsed 300w Cw Single Mode Fiber Laser ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Feasibility Study of Laser Ablation Using Long Pulsed 300W, CW Single Mode Fiber Laser by : Jason Robert Dilwith
Download or read book Feasibility Study of Laser Ablation Using Long Pulsed 300W, CW Single Mode Fiber Laser written by Jason Robert Dilwith and published by . This book was released on 2005 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keywords: ablation, drilling, micro holes, laser.
Book Synopsis Feasibility Study of Laser Ablation Using Long Pulsed 300W, CW Single Mode Fiber Laser by :
Download or read book Feasibility Study of Laser Ablation Using Long Pulsed 300W, CW Single Mode Fiber Laser written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Many applications now require micro sized holes that are difficult to produce with conventional methods. The entrance of lasers in the industry has brought about a better method for producing these holes. However the ultra-short pulse lasers that are normally used are extremely expensive and require many pulses to remove the material due to the small amount of energy they deposit. The objective of this research is to examine the feasibility of laser ablation using a 300W, CW Single Mode fiber laser which has high continuous power output for each pulse and has excellent beam quality. The results show that laser ablation occurs when a 100mm lens is used with pulse durations at 40 microseconds or below. Using one 18 microsecond pulse, a blind hole of 43.6 microns in diameter and 23.6 microns in depth with an aspect ratio of 0.54 can be created with little heat affected zone. This performance is comparable to nanosecond lasers, but with much higher hole depth per pulse. It was also found that the pulse duration must be short enough so that the ablating effect of the initial spike of an enhanced pulse is not nullified due to melting. At longer pulse durations (50 microseconds or more), raised surfaces are created instead of holes.
Book Synopsis High-Power Diode Lasers by : Roland Diehl
Download or read book High-Power Diode Lasers written by Roland Diehl and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from the basics of semiconductor lasers with emphasis on the generation of high optical output power the reader is introduced in a tutorial way to all key technologies required to fabricate high-power diode-laser sources. Various applications are exemplified.
Book Synopsis High Power Laser Propulsion by : Yuri A. Rezunkov
Download or read book High Power Laser Propulsion written by Yuri A. Rezunkov and published by Springer Nature. This book was released on 2021-08-25 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an in-depth analysis of the physical phenomena of thrust production by laser radiation, as well as laser propulsion engines, and laser-propelled vehicles. It brings together into a unified context accumulated up-to-date information on laser propulsion research, considering propulsion phenomena, laser propulsion techniques, design of vehicles with laser propulsion engines, and high-power laser systems to provide movement for space vehicles. In particular, the reader will find detailed coverage of: designs of laser propulsion engines, operating as both air-breathing and ramjet engines to launch vehicles into LEOs; Assembly of vehicles whereby laser power from a remote laser is collected and directed into a propulsion engine; and, the laser-adaptive systems that control a laser beam to propel vehicles into orbits by delivering laser power through the Earth's atmosphere. This book is essential reading for researchers and professionals involved in laser propulsion.
Book Synopsis Cement-lime Mortars by : Harry Vincent Johnson
Download or read book Cement-lime Mortars written by Harry Vincent Johnson and published by . This book was released on 1926 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CO2 Laser Cutting written by John Powell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: CO2 Laser Cutting explains and describes how engineering materials are cut using a CO2 laser. Information is given on the cutting of metals and non metals on a wide range of levels from practical advice and processing parameters to explanations of the physical and chemical reactions which take place in the cut zone. In an effort to make the book as readable and informative as possible the subject is treated in a descriptive rather than a mathematical way. The benefit of CO2 Laser Cutting is twofold as it gives practical advice to the operator and technical advice to the researchers or scientist.
Book Synopsis High Energy and Short Pulse Lasers by : Richard Viskup
Download or read book High Energy and Short Pulse Lasers written by Richard Viskup and published by BoD – Books on Demand. This book was released on 2016-09-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the readers an introduction to experimental and theoretical knowledge acquired by large-scale laser laboratories that are dealing with extra-high peak power and ultrashort laser pulses for research of terawatt (TW), petawatt (PW), or near-future exawatt (EW) laser interactions, for soft X-ray sources, for acceleration of particles, or for generation of hot dense thermal plasma for the laser fusion. The other part of this book is dealing with the small-scale laser laboratories that are using for its research on commercial sources of laser radiation, nanosecond (ns), picosecond (ps), or femtosecond (fs) laser pulses, either for basic research or for more advanced applications. This book is divided into six main sections dealing with short and ultrashort laser pulses, laser-produced soft X-ray sources, large-scale high-power laser systems, free-electron lasers, fiber-based sources of short optical pulse, and applications of short pulse lasers. In each chapter readers can find fascinating topics related to the high energy and/or short pulse laser technique. Individual chapters should serve the broad spectrum of readers of different expertise, layman, undergraduate and postgraduate students, scientists, and engineers, who may in this book find easily explained fundamentals as well as advanced principles of particular subjects related to these phenomena.
Book Synopsis Handbook of Laser Micro- and Nano-Engineering by : KOJI SUGIOKA.
Download or read book Handbook of Laser Micro- and Nano-Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Book Synopsis Laser - Surface Interactions by : Rashid A. Ganeev
Download or read book Laser - Surface Interactions written by Rashid A. Ganeev and published by Springer Science & Business Media. This book was released on 2013-10-17 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the interaction of laser radiation with various surfaces at variable parameters of radiation. As a basic principle of classification we chose the energetic or intensity level of interaction of laser radiation with the surfaces. These two characteristics of laser radiation are the most important parameters defining entire spectrum of the processes occurring on the surfaces during interaction with electromagnetic waves. This is a first book containing a whole spectrum of the laser-surface interactions distinguished by the ranges of used laser intensity. It combines the surface response starting from extremely weak laser intensities (~1 W cm-2) up to the relativistic intensities (~1020 W cm-2 and higher). The book provides the basic information about lasers and acquaints the reader with both common applications of laser-surface interactions (laser-related printers, scanners, barcode readers, discs, material processing, military, holography, medicine, etc) and unusual uses of the processes on the surfaces under the action of lasers (art conservation, rangefinders and velocimeters, space and earth explorations, surface engineering and ablation, and others). The scientific applications of laser-surfaces interactions (surface optical nonlinearities, surface enhanced Raman spectroscopy, surface nanostructuring, nanoripples and clusters formation, X-ray lasers and harmonic generation from the surfaces) are discussed from the point of view of the close relations between the properties of surface and matter, which is a cornerstone of most of studies of materials. The novelty of the approach developed in Laser - Surface Interactions is related with the interconnection of scientific studies with numerous applications of the laser-surface interactions separated in different chapters by the ranges of laser intensities. We present most recent achievements in this field. The book provides valuable information for different ranges of reader's preparedness to the laser-related topics (from unprepared readers, to students, engineers and researchers, professionals and academics).
Book Synopsis Ultraviolet Laser Technology and Applications by : David L. Elliott
Download or read book Ultraviolet Laser Technology and Applications written by David L. Elliott and published by Academic Press. This book was released on 2014-06-28 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultraviolet Laser Technology and Applications is a hands-on reference text that identifies the main areas of UV laser technology; describes how each is applied; offers clearly illustrated examples of UV opticalsystems applications; and includes technical data on optics, lasers, materials, and systems. This book is unique for its comprehensive, in-depth coverage. Each chapter deals with a different aspect of the subject, beginning with UV light itself; moving through the optics, sources, and systems; and concluding with detailed descriptions of applications in various fields. The text enables practicing engineers and researchers to utilize concepts and innovations to solve actual problems encountered in UV optical technology applications. It also offers a wealth of information for equipment designers and manufacturers. Those in laser fields (including medical, electronics, and semiconductors), students, engineers, technicians, as well as newcomers to the subject who require a basic introduction to the topic, will all find Ultraviolet Laser Technology and Applications to be an essential resource. Serves as a valuable, practical reference to UV laser technology Presents detailed technical data and techniques Offers highly illustrated optics designs and beam delivery systems Includes an extensive bibliography, references, and glossary Covers all major UV laser markets and technology systems
Book Synopsis Laser-induced Graphene by : Ruquan Ye
Download or read book Laser-induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.
Book Synopsis Laser Processing of Engineering Materials by : John Ion
Download or read book Laser Processing of Engineering Materials written by John Ion and published by Elsevier. This book was released on 2005-03-22 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete guide to understanding and using lasers in material processing!Lasers are now an integral part of modern society, providing extraordinary opportunities for innovation in an ever-widening range of material processing and manufacturing applications. The study of laser material processing is a core element of many materials and manufacturing courses at undergraduate and postgraduate level. As a consequence, there is now a vast amount of research on the theory and application of lasers to be absorbed by students, industrial researchers, practising engineers and production managers. Written by an acknowledged expert in the field with over twenty years' experience in laser processing, John Ion distils cutting-edge information and research into a single key text. Essential for anyone studying or working with lasers, Laser Processing of Engineering Materials provides a clear explanation of the underlying principles, including physics, chemistry and materials science, along with a framework of available laser processes and their distinguishing features and variables. This book delivers the knowledge needed to understand and apply lasers to the processing of engineering materials, and is highly recommended as a valuable guide to this revolutionary manufacturing technology. The first single volume text that treats this core engineering subject in a systematic manner Covers the principles, practice and application of lasers in all contemporary industrial processes; packed with examples, materials data and analysis, and modelling techniques
Book Synopsis Recommended Values of Thermophysical Properties for Selected Commercial Alloys by : K. C. Mills
Download or read book Recommended Values of Thermophysical Properties for Selected Commercial Alloys written by K. C. Mills and published by Woodhead Publishing. This book was released on 2002 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis A Text Book of Medical Instruments by : S. Ananthi
Download or read book A Text Book of Medical Instruments written by S. Ananthi and published by New Age International. This book was released on 2006 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: This book has therefore subdivided the realm of medical instruments into the same sections like a text on physiology and introduces the basic early day methods well, before dealing with the details of present day instruments currently in
Book Synopsis ANSI Z136. 1 Safe Use of Lasers (2014) by : American National Standard
Download or read book ANSI Z136. 1 Safe Use of Lasers (2014) written by American National Standard and published by . This book was released on 2014-01-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ANSI Z136.1 is a parent document and cornerstone of the Z136 series of laser safety standards, the Z136.1 is the foundation of laser safety programs for industrial, military, medical, and educational applications nationwide. Z136.1 provides guidance for the safe use of lasers and laser systems by defining control measures for each of seven laser hazard classifications. A practical means for accomplishing this is to (1) classify lasers and laser systems according to their relative hazards and to (2) specify appropriate controls for each classification Once a laser or laser system is properly classified, there should be no need to carry out tedious measurements or calculations to meet the provisions of this standard. However, technical information on measurements, calculations and biological effects is also provided within the standard and its appendixes.
Book Synopsis Principles in Contemporary Orthodontics by : Silvano Naretto
Download or read book Principles in Contemporary Orthodontics written by Silvano Naretto and published by BoD – Books on Demand. This book was released on 2011-11-25 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthodontics is a fast developing science as well as the field of medicine in general. The attempt of this book is to propose new possibilities and new ways of thinking about Orthodontics beside the ones presented in established and outstanding publications available elsewhere. Some of the presented chapters transmit basic information, other clinical experiences and further offer even a window to the future. In the hands of the reader this book could provide an useful tool for the exploration of the application of information, knowledge and belief to some orthodontic topics and questions.
Book Synopsis Fundamentals of Laser-Assisted Micro- and Nanotechnologies by : Vadim P. Veiko
Download or read book Fundamentals of Laser-Assisted Micro- and Nanotechnologies written by Vadim P. Veiko and published by Springer. This book was released on 2014-05-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state of the art of laser micro- and nanotechnology. The physical fundamentals of different processes and the application are presented. The book deals with different materials like phase change and memory alloys, thin films, polymers etc. New phenomena and mechanisms of laser-matter interaction in nano-domains are explained. This book is helpful for students, postgraduates, engineers and researches working not only in the field of laser microtechnology but also in high-tech industry, like photonics, microelectronics, information technology.
