Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Control System Applications
Download Control System Applications full books in PDF, epub, and Kindle. Read online Control System Applications ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Control System Applications by : William S. Levine
Download or read book Control System Applications written by William S. Levine and published by CRC Press. This book was released on 2018-10-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control technology permeates every aspect of our lives. We rely on them to perform a wide variety of tasks without giving much thought to the origins of the technology or how it became such an important part of our lives. Control System Applications covers the uses of control systems, both in the common and in the uncommon areas of our lives. From the everyday to the unusual, it's all here. From process control to human-in-the-loop control, this book provides illustrations and examples of how these systems are applied. Each chapter contains an introduction to the application, a section defining terms and references, and a section on further readings that help you understand and use the techniques in your work environment. Highly readable and comprehensive, Control System Applications explores the uses of control systems. It illustrates the diversity of control systems and provides examples of how the theory can be applied to specific practical problems. It contains information about aspec ts of control that are not fully captured by the theory, such as techniques for protecting against controller failure and the role of cost and complexity in specifying controller designs.
Book Synopsis The Control Handbook by : William S. Levine
Download or read book The Control Handbook written by William S. Levine and published by CRC Press. This book was released on 1996-02-23 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the biggest, most comprehensive, and most prestigious compilation of articles on control systems imaginable. Every aspect of control is expertly covered, from the mathematical foundations to applications in robot and manipulator control. Never before has such a massive amount of authoritative, detailed, accurate, and well-organized information been available in a single volume. Absolutely everyone working in any aspect of systems and controls must have this book!
Book Synopsis Advanced Control Systems by : Yuriy P. Kondratenko
Download or read book Advanced Control Systems written by Yuriy P. Kondratenko and published by CRC Press. This book was released on 2022-09-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control Systems: Theory and Applications provides an overview of advanced research lines in control systems as well as in design, development and implementation methodologies for perspective control systems and their components in different areas of industrial and special applications. It consists of extended versions of the selected papers presented at the XXV International Conference on Automatic Control “Automatics 2018” (September 18-19, 2018, Lviv, Ukraine) which is the main Ukrainian Control Conference organized by Ukrainian Association on Automatic Control (National member organization of IFAC) and Lviv National University “Lvivska Politechnica”. More than 100 papers were presented at the conference with topics including: mathematical problems of control, optimization and game theory; control and identification under uncertainty; automated control of technical, technological and biotechnical objects; controlling the aerospace craft, marine vessels and other moving objects; intelligent control and information processing; mechatronics and robotics; information measuring technologies in automation; automation and IT training of personnel; the Internet of things and the latest technologies. The book is divided into two main parts, the first concerning theory (7 chapters) and the second concerning applications (7 chapters) of advanced control systems. The first part “Advances in Theoretical Research on Automatic Control” consists of theoretical research results which deal with descriptor control impulsive delay systems, motion control in condition of conflict, inverse dynamic models, invariant relations in optimal control, robust adaptive control, bio-inspired algorithms, optimization of fuzzy control systems, and extremal routing problem with constraints and complicated cost functions. The second part “Advances in Control Systems Applications” is based on the chapters which consider different aspects of practical implementation of advanced control systems, in particular, special cases in determining the spacecraft position and attitude using computer vision system, the spacecraft orientation by information from a system of stellar sensors, control synthesis of rotational and spatial spacecraft motion at approaching stage of docking, intelligent algorithms for the automation of complex biotechnical objects, an automatic control system for the slow pyrolysis of organic substances with variable composition, simulation complex of hierarchical systems based on the foresight and cognitive modelling, and advanced identification of impulse processes in cognitive maps. The chapters have been structured to provide an easy-to-follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area. This book may be useful for researchers and students who are interesting in advanced control systems.
Book Synopsis Control Systems Theory with Engineering Applications by : Sergey E. Lyshevski
Download or read book Control Systems Theory with Engineering Applications written by Sergey E. Lyshevski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics systems (living organisms, electromechanical and industrial systems, chemical and technological processes, market and ecology, and so forth) can be considered and analyzed using information and systems theories. For example, adaptive human behavior can be studied using automatic feedback control. As an illustrative example, the driver controls a car changing the speed and steer ing wheels using incoming information, such as traffic and road conditions. This book focuses on the most important and manageable topics in applied multivariable control with application to a wide class of electromechanical dynamic systems. A large spectrum of systems, familiar to electrical, mechanical, and aerospace stu dents, engineers, and scholars, are thoroughly studied to build the bridge between theory and practice as well as to illustrate the practical application of control theory through illustrative examples. It is the author's goal to write a book that can be used to teach undergraduate and graduate classes in automatic control and nonlin ear control at electrical, mechanical, and aerospace engineering departments. The book is also addressed to engineers and scholars, and the examples considered allow one to implement the theory in a great variety of industrial systems. The main purpose of this book is to help the reader grasp the nature and significance of multivariable control.
Book Synopsis Automatic Control Systems by : Benjamin C. Kuo
Download or read book Automatic Control Systems written by Benjamin C. Kuo and published by . This book was released on 1995-01 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to automatic control systems has been updated to reflect the increasing use of computer-aided learning and design. Aiming at a more accessible approach, this edition demonstrates the solution of complex problems with the aid of computer software; integrates several real world applications; provides a discussion of steady-state error analysis, including nonunity feedback systems; discusses circuit-realization of controller transfer functions; offers a treatment of Nyquist criterion on systems with nonminimum-phase transfer functions; explores time-domain and frequency domain designs side-by-side in one chapter; and adds a chapter on Design of Discrete-Data Control Systems.
Book Synopsis Discrete-Time Control System Design with Applications by : C.A. Rabbath
Download or read book Discrete-Time Control System Design with Applications written by C.A. Rabbath and published by Springer Science & Business Media. This book was released on 2013-12-02 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides a bridge between digital control theory and vehicle guidance and control practice. It presents practical techniques of digital redesign and direct discrete-time design suitable for a real-time implementation of controllers and guidance laws at multiple rates and with and computational techniques. The theory of digital control is given as theorems, lemmas, and propositions. The design of the digital guidance and control systems is illustrated by means of step-by-step procedures, algorithms, and case studies. The systems proposed are applied to realistic models of unmanned systems and missiles, and digital implementation.
Book Synopsis Internet-based Control Systems by : Shuang-Hua Yang
Download or read book Internet-based Control Systems written by Shuang-Hua Yang and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet plays a significant and growing role in real-time industrial manufacturing, scheduling and management. A considerable research effort has led to the development of new technologies that make it possible to use the Internet for supervision and control of industrial processes. Internet-based Control Systems addresses the challenges that need to be overcome before the Internet can be beneficially used not only for monitoring of but also remote control industrial plants. New design issues such as requirement specification, architecture selection and user-interface design are dealt with. Irregular data transmission and data loss and, in extreme cases, whole-system instability may result from Internet time-delay; this book guards against such phenomena from both computer science and control engineering perspectives. Security breaches and safety risks in an Internet-based control system could have very serious consequences and the author gives specific advice for avoiding them. This book is unique in bringing together multiple strands of research, mainly from computer science and control engineering, into an over-arching study of the entire subject. Practical perspectives are explored both through case studies in several chapters and through real applications including: · robot arm control; · web-based simulator for a catalytic reactor; · virtual supervision parameter control of a water tank system; · model predictive control for a process control unit; · remote control performance monitoring and maintenance; · remote control system design and implementation; Internet-based Control Systems is a useful introduction and guide for researchers in control engineering and computer science and developers of real-time Internet-enabling software. It can also be used for teaching a final year option or elective on Internet-enabled real-time system design, or as an advanced example of real-time software design for graduates.
Book Synopsis Fault-tolerant Control Systems by : Hassan Noura
Download or read book Fault-tolerant Control Systems written by Hassan Noura and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.
Book Synopsis Advances and Applications in Nonlinear Control Systems by : Sundarapandian Vaidyanathan
Download or read book Advances and Applications in Nonlinear Control Systems written by Sundarapandian Vaidyanathan and published by Springer. This book was released on 2016-03-17 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest advances and applications of nonlinear control systems. It consists of 30 contributed chapters by subject experts who are specialized in the various topics addressed in this book. The special chapters have been brought out in the broad areas of nonlinear control systems such as robotics, nonlinear circuits, power systems, memristors, underwater vehicles, chemical processes, observer design, output regulation, backstepping control, sliding mode control, time-delayed control, variables structure control, robust adaptive control, fuzzy logic control, chaos, hyperchaos, jerk systems, hyperjerk systems, chaos control, chaos synchronization, etc. Special importance was given to chapters offering practical solutions, modeling and novel control methods for the recent research problems in nonlinear control systems. This book will serve as a reference book for graduate students and researchers with a basic knowledge of electrical and control systems engineering. The resulting design procedures on the nonlinear control systems are emphasized using MATLAB software.
Book Synopsis Control Applications for Biomedical Engineering Systems by : Ahmad Taher Azar
Download or read book Control Applications for Biomedical Engineering Systems written by Ahmad Taher Azar and published by Academic Press. This book was released on 2020-01-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Applications for Biomedical Engineering Systems presents different control engineering and modeling applications in the biomedical field. It is intended for senior undergraduate or graduate students in both control engineering and biomedical engineering programs. For control engineering students, it presents the application of various techniques already learned in theoretical lectures in the biomedical arena. For biomedical engineering students, it presents solutions to various problems in the field using methods commonly used by control engineers. Points out theoretical and practical issues to biomedical control systems Brings together solutions developed under different settings with specific attention to the validation of these tools in biomedical settings using real-life datasets and experiments Presents significant case studies on devices and applications
Book Synopsis Control Systems: Theory and Applications by : Kuntsevich, Vsevolod
Download or read book Control Systems: Theory and Applications written by Kuntsevich, Vsevolod and published by River Publishers. This book was released on 2018-11-12 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, a considerable amount of effort has been devoted, both in industry and academia, towards the development of advanced methods of control theory with focus on its practical implementation in various fields of human activity such as space control, robotics, control applications in marine systems, control processes in agriculture and food production. Control Systems: Theory and Applications consists of selected best papers which were presented at XXIV International conference on automatic control “Automatics 2017” (September 13-15, 2017, Kyiv, Ukraine) organized by Ukrainian Association on Automatic Control (National member organization of IFAC – International Federation on Automatic Control) and National University of Life and Environmental Sciences of Ukraine. More than 120 presentations where discussed at the conference, with participation of the scientists from the numerous countries. The book is divided into two main parts, a first on Theory of Automatic Control (5 chapters) and the second on Control Systems Applications (8 chapters). The selected chapters provide an overview of challenges in the area of control systems design, modeling, engineering and implementation and the approaches and techniques that relevant research groups within this area are employing to try to resolve these. This book on advanced methods of control theory and successful cases in the practical implementation is ideal for personnel in modern technological processes automation and SCADA systems, robotics, space and marine industries as well as academic staff and master/research students in computerized control systems, automatized and computer-integrated systems, electrical and mechanical engineering.
Book Synopsis Control Systems and Applications for HVAC/R by : Thomas J. Horan
Download or read book Control Systems and Applications for HVAC/R written by Thomas J. Horan and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Computer-Aided Control Systems Design by : Cheng Siong Chin
Download or read book Computer-Aided Control Systems Design written by Cheng Siong Chin and published by CRC Press. This book was released on 2012-12-12 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Control Systems Design: Practical Applications Using MATLAB® and Simulink® supplies a solid foundation in applied control to help you bridge the gap between control theory and its real-world applications. Working from basic principles, the book delves into control systems design through the practical examples of the ALSTOM gasifier system in power stations and underwater robotic vehicles in the marine industry. It also shows how powerful software such as MATLAB® and Simulink® can aid in control systems design. Make Control Engineering Come Alive with Computer-Aided Software Emphasizing key aspects of the design process, the book covers the dynamic modeling, control structure design, controller design, implementation, and testing of control systems. It begins with the essential ideas of applied control engineering and a hands-on introduction to MATLAB and Simulink. It then discusses the analysis, model order reduction, and controller design for a power plant and the modeling, simulation, and control of a remotely operated vehicle (ROV) for pipeline tracking. The author explains how to obtain the ROV model and verify it by using computational fluid dynamic software before designing and implementing the control system. In addition, the book details the nonlinear subsystem modeling and linearization of the ROV at vertical plane equilibrium points. Throughout, the author delineates areas for further study. Appendices provide additional information on various simulation models and their results. Learn How to Perform Simulations on Real Industry Systems A step-by-step guide to computer-aided applied control design, this book supplies the knowledge to help you deal with control problems in industry. It is a valuable reference for anyone who wants a better understanding of the theory and practice of basic control systems design, analysis, and implementation.
Book Synopsis Control Systems Technology by : Curtis D. Johnson
Download or read book Control Systems Technology written by Curtis D. Johnson and published by Pearson. This book was released on 2002 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents All of the major topics in modern analog and digital control systems, along with the practical, applications oriented knowledge and skills needed by technicians. It contains user-friendly conceptual explanations and clearly written mathematical developments. Examples of both Mathcad and MATLAB illustrate computer problem solving--but this book emphasizes the ability to use any suitable software to achieve successful results in solving problems and performing design. Chapter topics include Measurement; Laplace Transforms; Control System Models; Static and Dynamic Response; Stability; Frequency Response Analysis; Root Locus; State Variable Analysis; Introduction to Discrete Control Systems; Z-Transforms and Discrete State-Space Analysis; Digital Signal Representations; Discrete Time Control Systems; Stability of Discrete Control Systems; and Advanced Topics in Control Systems. For engineers and technicians working for companies that integrate control systems with the use of programmable logic controllers.
Book Synopsis Networked Control Systems by : Fei-Yue Wang
Download or read book Networked Control Systems written by Fei-Yue Wang and published by Springer Science & Business Media. This book was released on 2008-06-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked control systems (NCS) confer advantages of cost reduction, system diagnosis and flexibility, minimizing wiring and simplifying the addition and replacement of individual elements; efficient data sharing makes taking globally intelligent control decisions easier with NCS. The applications of NCS range from the large scale of factory automation and plant monitoring to the smaller networks of computers in modern cars, places and autonomous robots. Networked Control Systems presents recent results in stability and robustness analysis and new developments related to networked fuzzy and optimal control. Many chapters contain case-studies, experimental, simulation or other application-related work showing how the theories put forward can be implemented. The state-of-the art research reported in this volume by an international team of contributors makes it an essential reference for researchers and postgraduate students in control, electrical, computer and mechanical engineering and computer science.
Book Synopsis Control of Linear Parameter Varying Systems with Applications by : Javad Mohammadpour
Download or read book Control of Linear Parameter Varying Systems with Applications written by Javad Mohammadpour and published by Springer Science & Business Media. This book was released on 2012-03-08 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Linear Parameter Varying Systems compiles state-of-the-art contributions on novel analytical and computational methods for addressing system identification, model reduction, performance analysis and feedback control design and addresses address theoretical developments, novel computational approaches and illustrative applications to various fields. Part I discusses modeling and system identification of linear parameter varying systems, Part II covers the importance of analysis and control design when working with linear parameter varying systems (LPVS) , Finally, Part III presents an applications based approach to linear parameter varying systems, including modeling of a turbocharged diesel engines, Multivariable control of wind turbines, modeling and control of aircraft engines, control of an autonomous underwater vehicles and analysis and synthesis of re-entry vehicles.
Book Synopsis Methods and Applications of Intelligent Control by : S.G. Tzafestas
Download or read book Methods and Applications of Intelligent Control written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with Intelligent Control methods and applications. The field of intelligent control has been expanded very much during the recent years and a solid body of theoretical and practical results are now available. These results have been obtained through the synergetic fusion of concepts and techniques from a variety of fields such as automatic control, systems science, computer science, neurophysiology and operational research. Intelligent control systems have to perform anthropomorphic tasks fully autonomously or interactively with the human under known or unknown and uncertain environmental conditions. Therefore the basic components of any intelligent control system include cognition, perception, learning, sensing, planning, numeric and symbolic processing, fault detection/repair, reaction, and control action. These components must be linked in a systematic, synergetic and efficient way. Predecessors of intelligent control are adaptive control, self-organizing control, and learning control which are well documented in the literature. Typical application examples of intelligent controls are intelligent robotic systems, intelligent manufacturing systems, intelligent medical systems, and intelligent space teleoperators. Intelligent controllers must employ both quantitative and qualitative information and must be able to cope with severe temporal and spatial variations, in addition to the fundamental task of achieving the desired transient and steady-state performance. Of course the level of intelligence required in each particular application is a matter of discussion between the designers and users. The current literature on intelligent control is increasing, but the information is still available in a sparse and disorganized way.
