Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Control And Optimization Based On Network Communication
Download Control And Optimization Based On Network Communication full books in PDF, epub, and Kindle. Read online Control And Optimization Based On Network Communication ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Control and Optimization Based on Network Communication by : Xi-Ming Sun
Download or read book Control and Optimization Based on Network Communication written by Xi-Ming Sun and published by Springer Nature. This book was released on 2023-03-16 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the problems of network-based control and optimization. As is known, network-based control has great advantages over traditional control systems because it may lead to easy installation and maintenance, low cost, and so on. Sometimes, network-based control is also necessary in many situations. For example, multi-agents may need to communicate with each other under wireless scenarios. On the other hand, the network may lead to some imperfect factors such as samplings, delays, transmission protocols, and packet losses. These factors may degrade the system performance and even lead to the instability of the control systems. This book aims at providing a modeling framework and analysis approach for the general nonlinear networked control systems based on the hybrid framework. The proposed results deal with very general nonlinear systems and help the readers understand the principle of nonlinear network-based control and optimization.
Book Synopsis Network Optimization and Control by : Srinivas Shakkottai
Download or read book Network Optimization and Control written by Srinivas Shakkottai and published by Now Publishers Inc. This book was released on 2008 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network Optimization and Control is the ideal starting point for a mature reader with little background on the subject of congestion control to understand the basic concepts underlying network resource allocation.
Book Synopsis Communication Networks by : R. Srikant
Download or read book Communication Networks written by R. Srikant and published by Cambridge University Press. This book was released on 2014 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern mathematical approach to the design of communication networks for graduate students, blending control, optimization, and stochastic network theories alongside a broad range of performance analysis tools. Practical applications are illustrated by making connections to network algorithms and protocols. End-of-chapter problems covering a range of difficulties support student learning.
Book Synopsis Linear Network Optimization by : Dimitri P. Bertsekas
Download or read book Linear Network Optimization written by Dimitri P. Bertsekas and published by MIT Press. This book was released on 1991 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear Network Optimization presents a thorough treatment of classical approaches to network problems such as shortest path, max-flow, assignment, transportation, and minimum cost flow problems.
Book Synopsis Stochastic Network Optimization with Application to Communication and Queueing Systems by : Michael Neely
Download or read book Stochastic Network Optimization with Application to Communication and Queueing Systems written by Michael Neely and published by Springer Nature. This book was released on 2022-05-31 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents a modern theory of analysis, control, and optimization for dynamic networks. Mathematical techniques of Lyapunov drift and Lyapunov optimization are developed and shown to enable constrained optimization of time averages in general stochastic systems. The focus is on communication and queueing systems, including wireless networks with time-varying channels, mobility, and randomly arriving traffic. A simple drift-plus-penalty framework is used to optimize time averages such as throughput, throughput-utility, power, and distortion. Explicit performance-delay tradeoffs are provided to illustrate the cost of approaching optimality. This theory is also applicable to problems in operations research and economics, where energy-efficient and profit-maximizing decisions must be made without knowing the future. Topics in the text include the following: - Queue stability theory - Backpressure, max-weight, and virtual queue methods - Primal-dual methods for non-convex stochastic utility maximization - Universal scheduling theory for arbitrary sample paths - Approximate and randomized scheduling theory - Optimization of renewal systems and Markov decision systems Detailed examples and numerous problem set questions are provided to reinforce the main concepts. Table of Contents: Introduction / Introduction to Queues / Dynamic Scheduling Example / Optimizing Time Averages / Optimizing Functions of Time Averages / Approximate Scheduling / Optimization of Renewal Systems / Conclusions
Book Synopsis Network Optimization by : Panos M. Pardalos
Download or read book Network Optimization written by Panos M. Pardalos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network optimization is important in the modeling of problems and processes from such fields as engineering, computer science, operations research, transportation, telecommunication, decision support systems, manufacturing, and airline scheduling. Recent advances in data structures, computer technology, and algorithm development have made it possible to solve classes of network optimization problems that until recently were intractable. The refereed papers in this volume reflect the interdisciplinary efforts of a large group of scientists from academia and industry to model and solve complicated large-scale network optimization problems.
Book Synopsis Optimization of Computer Networks by : Pablo Pavón Mariño
Download or read book Optimization of Computer Networks written by Pablo Pavón Mariño and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the design and optimization of computer networks applying a rigorous optimization methodology, applicable to any network technology. It is organized into two parts. In Part 1 the reader will learn how to model network problems appearing in computer networks as optimization programs, and use optimization theory to give insights on them. Four problem types are addressed systematically – traffic routing, capacity dimensioning, congestion control and topology design. Part 2 targets the design of algorithms that solve network problems like the ones modeled in Part 1. Two main approaches are addressed – gradient-like algorithms inspiring distributed network protocols that dynamically adapt to the network, or cross-layer schemes that coordinate the cooperation among protocols; and those focusing on the design of heuristic algorithms for long term static network design and planning problems. Following a hands-on approach, the reader will have access to a large set of examples in real-life technologies like IP, wireless and optical networks. Implementations of models and algorithms will be available in the open-source Net2Plan tool from which the user will be able to see how the lessons learned take real form in algorithms, and reuse or execute them to obtain numerical solutions. An accompanying link to the author’s own Net2plan software enables readers to produce numerical solutions to a multitude of real-life problems in computer networks (www.net2plan.com).
Book Synopsis Optimal and Robust Scheduling for Networked Control Systems by : Stefano Longo
Download or read book Optimal and Robust Scheduling for Networked Control Systems written by Stefano Longo and published by CRC Press. This book was released on 2013-03-26 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.
Author :Mauricio G.C. Resende Publisher :Springer Science & Business Media ISBN 13 :0387301658 Total Pages :1120 pages Book Rating :4.3/5 (873 download)
Book Synopsis Handbook of Optimization in Telecommunications by : Mauricio G.C. Resende
Download or read book Handbook of Optimization in Telecommunications written by Mauricio G.C. Resende and published by Springer Science & Business Media. This book was released on 2008-12-10 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook brings together experts who use optimization to solve problems that arise in telecommunications. It is the first book to cover in detail the field of optimization in telecommunications. Recent optimization developments that are frequently applied to telecommunications are covered. The spectrum of topics covered includes planning and design of telecommunication networks, routing, network protection, grooming, restoration, wireless communications, network location and assignment problems, Internet protocol, World Wide Web, and stochastic issues in telecommunications. The book’s objective is to provide a reference tool for the increasing number of scientists and engineers in telecommunications who depend upon optimization.
Book Synopsis Traffic Engineering and QoS Optimization of Integrated Voice and Data Networks by : Gerald R. Ash
Download or read book Traffic Engineering and QoS Optimization of Integrated Voice and Data Networks written by Gerald R. Ash and published by Elsevier. This book was released on 2006-11-03 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes, analyzes, and recommends traffic engineering (TE) and quality of service (QoS) optimization methods for integrated voice/data dynamic routing networks. These functions control a network's response to traffic demands and other stimuli, such as link failures or node failures. TE and QoS optimization is concerned with measurement, modeling, characterization, and control of network traffic, and the application of techniques to achieve specific performance objectives. The scope of the analysis and recommendations include dimensioning, call/flow and connection routing, QoS resource management, routing table management, dynamic transport routing, and operational requirements. Case studies are included which provide the reader with a concrete way into the technical details and highlight why and how to use the techniques described in the book. - Includes Case Studies of MPLS and GMPLS Network Optimization - Presents state-of-the-art traffic engineering and quality of service optimization methods and illustrates the tradeoffs between the various methods discussed - Contains practical Case Studies based on large-scale service provider implementations and architecture plans - Written by a highly respected and well known active expert in traffic engineering and quality of service
Book Synopsis Smart Power Distribution Systems by : Qiang Yang
Download or read book Smart Power Distribution Systems written by Qiang Yang and published by Academic Press. This book was released on 2018-10-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Power Distribution Systems: Control, Communication, and Optimization explains how diverse technologies work to build and maintain smart grids around the globe. Yang, Yang and Li present the most recent advances in the control, communication and optimization of smart grids and provide unique insight into power system control, sensing and communication, and optimization technologies. The book covers control challenges for renewable energy and smart grids, communication in smart power systems, and optimization challenges in smart power system operations. Each area discussed focuses on the scientific innovations relating to the approaches, methods and algorithmic solutions presented. Readers will develop sound knowledge and gain insights into the integration of renewable energy generation in smart power distribution systems. - Presents the latest technological advances in electric power distribution networks, with a particular focus on methodologies, approaches and algorithms - Provides insights into the most recent research and developments from expert contributors from across the world - Presents a clear and methodical structure that guides the reader through discussion and analysis, providing unique insights and sound knowledge along the way
Book Synopsis Software Agents for Future Communication Systems by : Alex Hayzelden
Download or read book Software Agents for Future Communication Systems written by Alex Hayzelden and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agent technology has recently become one of the most vibrant and fastest growing areas in information technology. This is the first systematic introduction to software agents with the goal of exploiting them in future communication systems. The coherently written chapters provide complementary coverage of the relevant issues. Multi-agent systems and mobile agent approaches are presented and applied to important topics in future communication systems.
Book Synopsis Non-centralized Optimization-Based Control Schemes for Large-Scale Energy Systems by : W. Wicak Ananduta
Download or read book Non-centralized Optimization-Based Control Schemes for Large-Scale Energy Systems written by W. Wicak Ananduta and published by Springer Nature. This book was released on 2021-12-11 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of innovative non-centralized optimization-based control schemes to solve economic dispatch problems of large-scale energy systems. Particularly, it focuses on communication and cooperation processes of local controllers, which are integral parts of such schemes. The economic dispatch problem, which is formulated as a convex optimization problem with edge‐based coupling constraints, is solved by using methodologies in distributed optimization over time-varying networks, together with distributed model predictive control, and system partitioning techniques. At first, the book describes two distributed optimization methods, which are iterative and require the local controllers to exchange information with each other at each iteration. In turn, it shows that the sequence produced by these methods converges to an optimal solution when some conditions, which include how the controllers must communicate and cooperate, are satisfied. Further, it proposes an information exchange protocol to cope with possible communication link failures. Finally, the proposed distributed optimization methods are extended to the cases with random communication networks and asynchronous updates. Overall, this book presents a set of improved predictive control and distributed optimization methods, together with a rigorous mathematical analysis of each proposed algorithms. It describes a comprehensive approach to cope with communication and cooperation issues of non-centralized control schemes and show how the improved schemes can be successfully applied to solve the economic dispatch problems of large-scale energy systems.
Book Synopsis Applied Optimization Methods for Wireless Networks by : Y. Thomas Hou
Download or read book Applied Optimization Methods for Wireless Networks written by Y. Thomas Hou and published by Cambridge University Press. This book was released on 2014-04-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a variety of practical optimization techniques and modeling tips for solving challenging wireless networking problems. Case studies show how the techniques can be applied in practice, homework exercises are given at the end of each chapter, and PowerPoint slides are available online, together with a solutions manual for instructors.
Book Synopsis Optimization of Manufacturing Systems Using the Internet of Things by : Yingfeng Zhang
Download or read book Optimization of Manufacturing Systems Using the Internet of Things written by Yingfeng Zhang and published by Academic Press. This book was released on 2016-10-21 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of Manufacturing Systems Using the Internet of Things extends the IoT (Internet of Things) into the manufacturing field to develop an IoMT (Internet of Manufacturing Things) architecture with real-time traceability, visibility, and interoperability in production planning, execution, and control. This book is essential reading for anyone interested in the optimization and control of an intelligent manufacturing system. As modern manufacturing shop-floors can create bottlenecks in the capturing and collection of real-time field information, and because paper-based manual systems are time-consuming and prone to errors, this book helps readers understand how to alleviate these issues, assisting them in their decision-making on shop-floors. Includes case studies in implementing IoTs for data acquisition, monitoring, and assembly in manufacturing. Helps manufacturers to tackle the growing complexities and uncertainties of manufacturing systems in globalized business environments Acts as an introduction to using IoT for readers across industrial and manufacturing engineering
Book Synopsis Intelligent Network Management and Control by : Badr Benmammar
Download or read book Intelligent Network Management and Control written by Badr Benmammar and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The management and control of networks can no longer be envisaged without the introduction of artificial intelligence at all stages. Intelligent Network Management and Control deals with topical issues related mainly to intelligent security of computer networks, deployment of security services in SDN (software-defined networking), optimization of networks using artificial intelligence techniques and multi-criteria optimization methods for selecting networks in a heterogeneous environment. This book also focuses on selecting cloud computing services, intelligent unloading of calculations in the context of mobile cloud computing, intelligent resource management in a smart grid-cloud system for better energy efficiency, new architectures for the Internet of Vehicles (IoV), the application of artificial intelligence in cognitive radio networks and intelligent radio input to meet the on-road communication needs of autonomous vehicles.
Book Synopsis Geometric Programming for Communication Systems by : Mung Chiang
Download or read book Geometric Programming for Communication Systems written by Mung Chiang and published by Now Publishers Inc. This book was released on 2005 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently Geometric Programming has been applied to study a variety of problems in the analysis and design of communication systems from information theory and queuing theory to signal processing and network protocols. Geometric Programming for Communication Systems begins its comprehensive treatment of the subject by providing an in-depth tutorial on the theory, algorithms, and modeling methods of Geometric Programming. It then gives a systematic survey of the applications of Geometric Programming to the study of communication systems. It collects in one place various published results in this area, which are currently scattered in several books and many research papers, as well as to date unpublished results. Geometric Programming for Communication Systems is intended for researchers and students who wish to have a comprehensive starting point for understanding the theory and applications of geometric programming in communication systems.
