Aerodynamic Characteristics At Mach Numbers From 150 To 463 Of A Variable Geometry Lifting Reentry Concept Employing Elevator And Body Base Flaps For Control

Author : William I. Scallion
Publisher :
ISBN 13 :
Total Pages : 62 pages
Book Rating : 4.:/5 (317 download)

DOWNLOAD NOW!

Download or read book Aerodynamic Characteristics and Control Effectiveness of the HL-20 Lifting Body Configuration at Mach 10 in Air written by William I. Scallion and published by . This book was released on 1999 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: A 0.0196-scale model of the HL-20 lifting body, one of several configurations proposed for future crewed spacecraft, was tested in the Langley 31-Inch Mach 10 Tunnel. The purpose of the tests was to determine the effectiveness of fin-mounted elevons, a lower surface flush-mounted body flap, and a flush-mounted yaw controller at hypersonic speeds. The nominal angle-of-attack range, representative of hypersonic entry, was 20 to 41 degrees, the sideslip angles were 0, 2, and -2 degrees, and the test Reynolds number was 1.06 x 10[factor 6] based on model reference length. The aerodynamic, longitudinal, and lateral control effectiveness along with surface oil flow visualizations are presented and discussed. The configuration was longitudinally and laterally stable at the nominal center of gravity. The primary longitudinal control, the fin-mounted elevons, could not trim the model to the desired entry angle of attack of 30 degrees. The lower surface body flaps were effective for roll control and the associated adverse yawing moment was eliminated by skewing the body flap hinge lines. A yaw controller, flush-mounted on the lower surface, was also effective, and the associated small rolling moment was favorable.