Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Advanced Mathematical And Computational Tools In Metrology And Testing Ix
Download Advanced Mathematical And Computational Tools In Metrology And Testing Ix full books in PDF, epub, and Kindle. Read online Advanced Mathematical And Computational Tools In Metrology And Testing Ix ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Advanced Mathematical and Computational Tools in Metrology and Testing IX by : Franco Pavese
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing IX written by Franco Pavese and published by World Scientific. This book was released on 2012-03-27 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed worldwide contributions. They were prompted by presentations made at the ninth AMCTM Conference held in Göteborg (Sweden) in June 2011 on the theme of advanced mathematical and computational tools in metrology and also, in the title of this book series, in testing. The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also in keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards. Contents:Recommended Tools for Sensitivity Analysis Associated to the Evaluation of Measurement Uncertainty (A Allard and N Fischer)Case Study of Likelihood and Bayes Approaches for Measurement Based on Nonlinear Regression (A Bariska and R Bürgin)Uncertainty Modeling in 3D SEM Stereophotogrammetry (L Carli, M Galetto and G Genta)Software to Support the Use of GUM Supplement 2 — Extension to Any Number of Output Quantities (M G Cox, P M Harris and I M Smith)Probabilistic Characterization of Face Measurement (F Crenna, G B Rossi and L Bovio)Modeling Expert Knowledge to Assign Consensus Values in Proficiency Tests (S Demeyer and N Fischer)A Two-Stage MCM/MCMC Algorithm for Uncertainty Evaluation (A B Forbes)Data Fusion Techniques for Cylindrical Surface Measurements (M Galovska, R Tutsch and O Jusko)Stochastic Modeling Aspects for an Improved Solution of the Inverse Problem in Scatterometry (H Gross, M-A Henn, A Rathsfeld and M Bär)On the Difference of Meanings of “Zero Correction”: Zero Value Versus No Correction, and of the Associated Uncertainties (F Pavese)Uncertainty & Risks in Decision-Making in Qualitative Measurement: An Information-Theoretical Approach (L R Pendrill)Theory of AND Computation Program for Determination of the Reference Value in Key Comparisons Based on Bayesian Statistics (K Shirono, H Tanaka and K Ehara)and other papers Readership: Researchers, graduate students, academics and professionals in metrology. Keywords:Mathematics;Statistics;Modeling;Uncertainty;Metrology;Testing;Computational Tools;Measurement ScienceKey Features:Unique consolidated series of books (started in 1993) in mathematics, statistics and software specifically for metrology and testingAuthors are among the most prominent in the metrology and testing fieldsNo competing books in the same comprehensive set of fields
Book Synopsis Advanced Mathematical And Computational Tools In Metrology And Testing Xii by : Franco Pavese
Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Xii written by Franco Pavese and published by World Scientific. This book was released on 2022-01-13 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed contributions by researchers from national metrology institutes, universities and laboratories across the world involved in metrology and testing. The volume has been produced by the International Measurement Confederation Technical Committee 21, Mathematical Tools for Measurements and is the twelfth in the series. The papers cover topics in numerical analysis and computational tools, statistical inference, regression, calibration and metrological traceability, computer science and data provenance, and describe applications in a wide range of application domains. This volume is useful to all researchers, engineers and practitioners who need to characterize the capabilities of measurement systems and evaluate measurement data. It will also be of interest to scientists and engineers concerned with the reliability, trustworthiness and reproducibility of data and data analytics in data-driven systems in engineering, environmental and life sciences.
Book Synopsis Advanced Mathematical And Computational Tools In Metrology And Testing Xi by : Alistair B Forbes
Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Xi written by Alistair B Forbes and published by World Scientific. This book was released on 2018-10-16 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed contributions by researchers from institutions and laboratories across the world that are involved in metrology and testing. They were adapted from presentations made at the eleventh edition of the Advanced Mathematical and Computational Tools in Metrology and Testing conference held at the University of Strathclyde, Glasgow, in September 2017, organized by IMEKO Technical Committee 21, the National Physical Laboratory, UK, and the University of Strathclyde. The papers present new modeling approaches, algorithms and computational methods for analyzing data from metrology systems and for evaluation of the measurement uncertainty, and describe their applications in a wide range of measurement areas.This volume is useful to all researchers, engineers and practitioners who need to characterize the capabilities of measurement systems and evaluate measurement data. Through the papers written by experts working in leading institutions, it covers the latest computational approaches and describes applications to current measurement challenges in engineering, environment and life sciences.
Book Synopsis Advanced Mathematical and Computational Tools in Metrology and Testing X by : Franco Pavese
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing X written by Franco Pavese and published by World Scientific. This book was released on 2015-04-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original and refereed contributions from the tenth AMCTM Conference (http://www.nviim.ru/AMCTM2014) held in St. Petersburg (Russia) in September 2014 on the theme of advanced mathematical and computational tools in metrology and testing. The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards. Contents:Fostering Diversity of Thought in Measurement Science (F Pavese and P De Bièvre)Polynomial Calibration Functions Revisited: Numerical and Statistical Issues (M G Cox and P Harris)Empirical Functions with Pre-Assigned Correlation Behaviour (A B Forbes)Models and Methods of Dynamic Measurements: Results Presented by St. Petersburg Metrologists (V A Granovskii)Interval Computations and Interval-Related Statistical Techniques: Estimating Uncertainty of the Results of Data Processing and Indirect Measurements (V Ya Kreinovich)Classification, Modeling and Quantification of Human Errors in Chemical Analysis (I Kuselman)Application of Nonparametric Goodness-of-Fit Tests: Problems and Solution (B Yu Lemeshko)Dynamic Measurements Based on Automatic Control Theory Approach (A L Shestakov)Models for the Treatment of Apparently Inconsistent Data (R Willink)Model for Emotion Measurements in Acoustic Signals and Its Analysis (Y Baksheeva, K Sapozhnikova and R Taymanov)Uncertainty Calculation in Gravimetric Microflow Measurements (E Batista, N Almeida, I Godinho and E Filipe)Uncertainties Propagation from Published Experimental Data to Uncertainties of Model Parameters Adjusted by the Least Squares (V I Belousov, V V Ezhela, Y V Kuyanov, S B Lugovsky, K S Lugovsky and N P Tkachenko)A New Approach for the Mathematical Alignment Machine Tool-Paths on a Five-Axis Machine and Its Effect on Surface Roughness (S Boukebbab, J Chaves-Jacob, J-M Linares and N Azzam)Goodness-of-Fit Tests for One-Shot Device Testing Data (E V Chimitova and N Balakrishan)Calculation of Coverage Intervals: Some Study Cases (A Stepanov, A Chunovkina and N Burmistrova)Application of Numerical Methods in Metrology of Electromagnetic Quantities (M Cundeva-Blajer)Calibration Method of Measuring Instruments in Operating Conditions (A A Danilov, Yu V Kucherenko, M V Berzhinskaya, N P Ordinartseva)Statistical Methods for Conformity Assessment When Dealing with Computationally Expensive Systems: Application to a Fire Engineering Case Study (S Demeyer, N Fischer, F Didieux and M Binacchi)Overview of EMRP Joint Reserch Project NEW06 "Traceability for Computationally-Intensive Metrology" (A B Forbes, I M Smith, F Härtig and K Wendt)Stable Units of Account for Economic Value Correct Measuring (N Hovanov)A Novel Approach for Uncertainty Evaluation Using Characteristic Function Theory (A B Ionov, N S Chernysheva and B P Ionov)Estimation of Test Uncertainty for TraCIM Reference Pairs (F Keller, K Wendt and F Härtig)Approaches for Assigning Numerical Uncertainty to Reference Data Pairs for Software Validation (G J P Kok and I M Smith)Uncertainty Evaluation for a Computationally Expensive Model of a Sonic Nozzle (G J P Kok and N Pelevic)EllipseFit4HC: A MATLAB Algorithm for Demodulation and Uncertainty Evaluation of the Quadrature Interferometer Signals (R Köning, G Wimmer and V Witkovský)Considerations on the Influence of Test Equipment Instability and Calibration Methods on Measurement Uncertainty of the Test Laboratory (A S Krivov, S V Marinko and I G Boyko)A Cartesian Method to Improve the Results and Save Computation Time in Bayesian Signal Analysis (G A Kyriazis)The Definition of the Reliability of Identification of Complex Organic Compounds Using HPLC and Base Chromatographic and Spectral Data (E V Kulyabina and Yu A Kudeyarov)Uncertainty Evaluation of Fluid Dynamic Simulation with One-Dimensional Riser Model by Means of Stochastic Differential Equations (E A O Lima, S B Melo, C C Dantas, F A S Teles and S Soares Bandiera)Simulation Method to Estimate the Uncertainties of ISO Specifications (J-M Linares and J M Sprauel)Adding a Virtual Layer in a Sensor Network to Improve Measurement Reliability (U Maniscalco and R Rizzo)Calibration Analysis of a Computational Optical System Applied in the Dimensional Monitoring of a Suspension Bridge (L L Martins, J M Rebordão and A S Ribeiro)Determination of Numerical Uncertainty Associated with Numerical Artefacts for Validating Coordinate Metrology Software (H D Minh, I M Smith and A B Forbes)Least-Squares Method and Type B Evaluation of Standard Uncertainty (R Palenčár, S Ďuriš, P Pavlásek, M Dovica, S Slosarčík and G Wimmer)Optimising Measurement Processes Using Automated Planning (S Parkinson, A Crampton and A P Longstaff)Software Tool for Conversion of Historical Temperature Scales (P Pavlásek, S Ďuriš, R Palenčár and A Merlone)Few Measurements, Non-Normality: A Statement on the Expanded Uncertainty (J Petry, B De Boeck, M Dobre and A Peruzzi)Quantifying Uncertainty in Accelerometer Sensitivity Studies (A L Rukhin and D J Evans)Metrological Aspects of Stopping Iterative Procedures in Inverse Problems for Static-Mode Measurements (K K Semenov)Inverse Problems in Theory and Practice of Measurements and Metrology (K K Semenov, G N Solopchenko and V Ya Kreinovich)Fuzzy Intervals as Foundation of Metrological Support for Computations with Inaccurate Data (K K Semenov, G N Solopchenko and V Ya Kreinovich)Testing Statistical Hypotheses for Generalized Semiparametric Proportional Hazards Models with Cross-Effect of Survival Functions (M A Semenova and E V Chimitova)Novel Reference Value and DOE Determination by Model Selection and Posterior Predictive Checking (K Shirono, H Tanaka, M Shiro and K Ehara)Certification of Algorithms for Constructing Calibration Curves of Measuring Instruments (T Siraya)Discrete and Fuzzy Encoding of the ECG-Signal for Multidisease Diagnostic System (V Uspenskiy, K Vorontsov, V Tselykh and V Bunakov)Application of Two Robust Methods in Inter-Laboratory Comparisons with Small Samples (E T Volodarsky and Z L Warsza)Validation of CMM Evaluation Software Using TraCIM (K Wendt, M Franke and F Härtig)Semi-Parametric Polynomial Method for Retrospective Estimation of the Change-Point of Parameters of Non-Gaussian Sequences (S V Zabolotnii and Z L Warsza)Use of a Bayesian Approach to Improve Uncertainty of Model-Based Measurements by Hybrid Multi-Tool Metrology (N-F Zhang, B M Barnes, R M Silver and H Zhou)Application of Effective Number of Observations and Effective Degrees of Freedom for Analysis of Autocorrelated Observations (A Zieba) Readership: Researchers, graduate students, academics and professionals in metrology. Key Features:Unique consolidated series of books (started in 1993) in mathematics, statistics and software specifically for metrology and testingAuthors are among the most prominent in the metrology and testing fieldsNo competing books in the same comprehensive fieldKeywords:Mathematics;Statistics;Modeling;Uncertainty;Metrology;Testing;Computational Tools;Measurement Science
Book Synopsis Advanced Mathematical and Computational Tools in Metrology and Testing by :
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Advanced Mathematical and Computational Tools in Metrology and Testing IX by : Franco Pavese
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing IX written by Franco Pavese and published by World Scientific. This book was released on 2012 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed worldwide contributions. They were prompted by presentations made at the ninth AMCTM Conference held in Goteborg (Sweden) in June 2011 on the theme of advanced mathematical and computational tools in metrology and also, in the title of this book series, in testing. The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also in keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards.
Book Synopsis Advanced Mathematical and Computational Tools in Metrology and Testing VIII by : Franco Pavese
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Book Synopsis Advanced Mathematical and Computational Tools in Metrology VI by : P Ciarlini
Download or read book Advanced Mathematical and Computational Tools in Metrology VI written by P Ciarlini and published by World Scientific. This book was released on 2004-07-09 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects refereed contributions based on the presentations made at the Sixth Workshop on Advanced Mathematical and Computational Tools in Metrology, held at the Istituto di Metrologia “G. Colonnetti” (IMGC), Torino, Italy, in September 2003. It provides a forum for metrologists, mathematicians and software engineers that will encourage a more effective synthesis of skills, capabilities and resources, and promotes collaboration in the context of EU programmes, EUROMET and EA projects, and MRA requirements. It contains articles by an important, worldwide group of metrologists and mathematicians involved in measurement science and, together with the five previous volumes in this series, constitutes an authoritative source for the mathematical, statistical and software tools necessary to modern metrology. The proceedings have been selected for coverage in: Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)CC Proceedings — Engineering & Physical Sciences Contents:Processing the Coherent Anomalies on Digitalized Surfaces in Wavelet Domain (P Ciarlini & M L Lo Cascio)Least Squares Adjustment in the Presence of Discrepant Data (M G Cox et al.)Some Differences between the Applied Statistical Approach for Measurement Uncertainty Theory and the Traditional Approach in Metrology and Testing (C Perruchet)Compound-Modelling of Metrological Data Series (F Pavese)Validation of Calibration Methods — A Practical Approach (E Filipe)A Hybrid Method for (ℓ1 Approximation (D Lei & J C Mason)A New Off-Line Gain Stabilisation Method Applied to Alpha-Particle Spectrometry (S Pommé & G Sibbens)Development of Software for ANOVA that Can Generate Expressions of Variance Expectations (H Tanaka et al.)Short Course on Uncertainty Evaluation (M G Cox)Software Requirements in Legal Metrology: Short Course Held Adjacent to the Conference (D Richter)and other articles Readership: Researchers, graduate students, academics, professionals and industrialists in metrology. Keywords:Metrology;Measurement Science;Statistics;Software ToolsKey Features:Promotes effective mathematical and computational tools in metrologyClarifies the modelling, statistical and computational requirements in metrologyAssists young researchers in metrology and related fieldsAddresses industrial requirements
Book Synopsis Advanced Mathematical & Computational Tools in Metrology VII by : P. Ciarlini
Download or read book Advanced Mathematical & Computational Tools in Metrology VII written by P. Ciarlini and published by World Scientific. This book was released on 2006 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the refereed contributions based on the presentations made at the Seventh Workshop on Advanced Mathematical and Computational Tools in Metrology, a forum for metrologists, mathematicians and software engineers that will encourage a more effective synthesis of skills, capabilities and resources. The volume contains articles by world renowned metrologists and mathematicians involved in measurement science and, together with the six previous volumes in this series, constitutes an authoritative source of the mathematical, statistical and software tools necessary in modern metrology. Sample Chapter(s). Chapter 1: Modelling Measurement Processes in Complex Systems with Partial Differential Equations: From Heat Conduction to the Heart (537 KB). Contents: Modeling Measurement Processes in Complex Systems with Partial Differential Equations: From Heat Conduction to the Heart (M Bnr et al.); Mereotopological Approach for Measurement Software (E Benoit & R Dapoigny); Data Evaluation of Key Comparisons Involving Several Artefacts (M G Cox et al.); Box-Cox Transformations and Robust Control Charts in SPC (M I Gomes & F O Figueiredo); Multisensor Data Fusion and Its Application to Decision Making (P S Giruo et al.); Generic System Design for Measurement Databases OCo Applied to Calibrations in Vacuum Metrology, Bio-Signals and a Template System (H Gross et al.); Evaluation of Repeated Measurements from the Viewpoint of Conventional and Bayesian Statistics (I Lira & W WAger); Detection of Outliers in Interlaboratory Testing (C Perruchet); On Appropriate Methods for the Validation of Metrological Software (D Richter et al.); Data Analysis OCo A Dialogue with the Data (D S Sivia); Validation of Soft Sensors in Monitoring Ambient Parameters (P Ciarlini et al.); Evaluation of Standard Uncertainties in Nested Structures (E Filipe); Measurement System Analysis and Statistical Process Control (A B Forbes); Monte Carlo Study on Logical and Statistical Correlation (B Siebert et al.); Some Problems Concerning the Estimate of the Degree of Equivalence in MRA Key Comparisons and of Its Uncertainty (F Pavese); Preparing for a European Research Area Network in Metrology: Where are We Now? (M Khne et al.); and other papers. Readership: Researchers, graduate students, academics and professionals in metrology."
Book Synopsis Advanced Mathematical And Computational Tools In Metrology V by : Patrizia Ciarlini
Download or read book Advanced Mathematical And Computational Tools In Metrology V written by Patrizia Ciarlini and published by World Scientific. This book was released on 2001-03-09 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in metrology depend on improvements in scientific and technical knowledge and in instrumentation quality, as well as on better use of advanced mathematical tools and development of new ones. In this volume, scientists from both the mathematical and the metrological fields exchange their experiences. Industrial sectors, such as instrumentation and software, will benefit from this exchange, since metrology has a high impact on the overall quality of industrial products, and applied mathematics is becoming more and more important in industrial processes.This book is of interest to people in universities, research centers and industries who are involved in measurements and need advanced mathematical tools to solve their problems, and also to those developing such mathematical tools.
Book Synopsis Advanced Mathematical and Computational Tools in Metrology VII by :
Download or read book Advanced Mathematical and Computational Tools in Metrology VII written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Advanced Mathematical & Computational Tools in Metrology IV by : P. Ciarlini
Download or read book Advanced Mathematical & Computational Tools in Metrology IV written by P. Ciarlini and published by World Scientific. This book was released on 2000 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in metrology depend on improvements in scientific and technical knowledge and in instrumentation quality, as well as better use of advanced mathematical tools and development of new ones. In this volume, scientists from both the mathematical and the metrological fields exchange their experiences. Industrial sectors, such as instrumentation and software, are likely to benefit from this exchange, since metrology has a high impact on the overall quality of industrial products, and applied mathematics is becoming more and more important in industrial processes.This book is of interest to people in universities, research centers and industries who are involved in measurements and need advanced mathematical tools to solve their problems, and to those developing such mathematical tools.
Book Synopsis Advanced Mathematical Tools In Metrology Iii by : Patrizia Ciarlini
Download or read book Advanced Mathematical Tools In Metrology Iii written by Patrizia Ciarlini and published by World Scientific. This book was released on 1997-08-05 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is of interest to researchers in universities, research centres and industries who are involved in measurements and need advanced mathematical tools to solve their problems, and to whoever is working in the development of these mathematical tools. Advances in metrology depend on improvements in scientific and technical knowledge and in instrumentation quality as well in a better use of advanced mathematical tools and in the development of new ones. In this book scientists from both the mathematical and the metrological fields exchange their experiences. Industrial sectors such as instrumentation and software, are likely to benefit from this exchange, since metrology has a high impact on the overall quality of industrial products and applied mathematics is becoming more and more important in industrial processes.
Book Synopsis Data Modeling for Metrology and Testing in Measurement Science by : Franco Pavese
Download or read book Data Modeling for Metrology and Testing in Measurement Science written by Franco Pavese and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provide a comprehensive set of modeling methods for data and uncertainty analysis, taking readers beyond mainstream methods and focusing on techniques with a broad range of real-world applications. The book will be useful as a textbook for graduate students, or as a training manual in the fields of calibration and testing. The work may also serve as a reference for metrologists, mathematicians, statisticians, software engineers, chemists, and other practitioners with a general interest in measurement science.
Book Synopsis Advanced Mathematical Tools in Metrology II by : P. Ciarlini
Download or read book Advanced Mathematical Tools in Metrology II written by P. Ciarlini and published by World Scientific Publishing Company Incorporated. This book was released on 1996 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Basics of Precision Engineering by : Richard Leach
Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.
Book Synopsis Measurement Uncertainty and Probability by : Robin Willink
Download or read book Measurement Uncertainty and Probability written by Robin Willink and published by Cambridge University Press. This book was released on 2013-02-14 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: A measurement result is incomplete without a statement of its 'uncertainty' or 'margin of error'. But what does this statement actually tell us? By examining the practical meaning of probability, this book discusses what is meant by a '95 percent interval of measurement uncertainty', and how such an interval can be calculated. The book argues that the concept of an unknown 'target value' is essential if probability is to be used as a tool for evaluating measurement uncertainty. It uses statistical concepts, such as a conditional confidence interval, to present 'extended' classical methods for evaluating measurement uncertainty. The use of the Monte Carlo principle for the simulation of experiments is described. Useful for researchers and graduate students, the book also discusses other philosophies relating to the evaluation of measurement uncertainty. It employs clear notation and language to avoid the confusion that exists in this controversial field of science.
