Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Adaptive Production Systems
Download Adaptive Production Systems full books in PDF, epub, and Kindle. Read online Adaptive Production Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Technological Innovation for Applied AI Systems by : Luis M. Camarinha-Matos
Download or read book Technological Innovation for Applied AI Systems written by Luis M. Camarinha-Matos and published by Springer Nature. This book was released on 2021-06-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021, held in Costa de Caparica, Portugal, in July 2021.* The 34 papers presented were carefully reviewed and selected from 92 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for industry and service systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks; smart manufacturing; cyber-physical systems and digital twins; intelligent decision making; smart energy management; communications and electronics; classification systems; smart healthcare systems; and medical devices. *The conference was held virtually. Chapters “Characteristics of Adaptable Control of Production Systems and the Role of Self-organization Towards Smart Manufacturing” and “Predictive Manufacturing: Enabling Technologies, Frameworks and Applications” are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Book Synopsis Enterprise Interoperability: Smart Services and Business Impact of Enterprise Interoperability by : Martin Zelm
Download or read book Enterprise Interoperability: Smart Services and Business Impact of Enterprise Interoperability written by Martin Zelm and published by John Wiley & Sons. This book was released on 2018-10-22 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of future industry to create interactive, flexible and always-on connections between design, manufacturing and supply is an ongoing challenge, affecting competitiveness, efficiency and resourcing. The goal of enterprise interoperability (EI) research is therefore to address the effectiveness of solutions that will successfully prepare organizations for the advent and uptake of new technologies. This volume outlines results and practical concepts from recent and ongoing European research studies in EI, and examines the results of research and discussions cultivated at the I-ESA 2018 conference, “Smart services and business impact of enterprise interoperability”. The conference, designed to encourage collaboration between academic inquiry and real-world industry applications, addressed a number of advanced multidisciplinary topics including Industry 4.0, Big Data, the Internet of Things, Cloud computing, ontology, artificial intelligence, virtual reality and enterprise modelling for future “smart” manufacturing. Readers will find this book to be a source of invaluable knowledge for enterprise architects in a range of industries and organizations.
Book Synopsis A Framework for Assessing Effects of the Food System by : National Research Council
Download or read book A Framework for Assessing Effects of the Food System written by National Research Council and published by National Academies Press. This book was released on 2015-06-17 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: How we produce and consume food has a bigger impact on Americans' well-being than any other human activity. The food industry is the largest sector of our economy; food touches everything from our health to the environment, climate change, economic inequality, and the federal budget. From the earliest developments of agriculture, a major goal has been to attain sufficient foods that provide the energy and the nutrients needed for a healthy, active life. Over time, food production, processing, marketing, and consumption have evolved and become highly complex. The challenges of improving the food system in the 21st century will require systemic approaches that take full account of social, economic, ecological, and evolutionary factors. Policy or business interventions involving a segment of the food system often have consequences beyond the original issue the intervention was meant to address. A Framework for Assessing Effects of the Food System develops an analytical framework for assessing effects associated with the ways in which food is grown, processed, distributed, marketed, retailed, and consumed in the United States. The framework will allow users to recognize effects across the full food system, consider all domains and dimensions of effects, account for systems dynamics and complexities, and choose appropriate methods for analysis. This report provides example applications of the framework based on complex questions that are currently under debate: consumption of a healthy and safe diet, food security, animal welfare, and preserving the environment and its resources. A Framework for Assessing Effects of the Food System describes the U.S. food system and provides a brief history of its evolution into the current system. This report identifies some of the real and potential implications of the current system in terms of its health, environmental, and socioeconomic effects along with a sense for the complexities of the system, potential metrics, and some of the data needs that are required to assess the effects. The overview of the food system and the framework described in this report will be an essential resource for decision makers, researchers, and others to examine the possible impacts of alternative policies or agricultural or food processing practices.
Book Synopsis Manufacturing Systems and Technologies for the New Frontier by : Fumihiko Kimura
Download or read book Manufacturing Systems and Technologies for the New Frontier written by Fumihiko Kimura and published by Springer Science & Business Media. This book was released on 2008-05-19 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collected here are 112 papers concerned with new directions in manufacturing systems, given at the 41st CIRP Conference on Manufacturing Systems. The high-quality material includes reports of work from both scientific and engineering standpoints.
Book Synopsis Networks of Interacting Machines by : Dieter Armbruster
Download or read book Networks of Interacting Machines written by Dieter Armbruster and published by World Scientific. This book was released on 2005 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review volume is devoted to a discussion of analogies and differences of complex production systems OCo natural, as in biological cells, or man-made, as in economic systems or industrial production. Taking this unified look at production is based on two observations: Cells and many biological networks are complex production units that have evolved to solve production problems in a reliable and optimal way in a highly stochastic environment. On the other hand, industrial production is becoming increasingly complex and often hard to predict. As a result, modeling and control of such production networks involve many different spatial and temporal scales and decision policies for many different structures. The common themes of industrial and biological production include evolution and optimization, synchronization and self-organization, robust operation despite high stochasticity, and hierarchical dynamics. The mathematical techniques used come from dynamical systems theory, transport equations, control theory, pattern formation, graph theory, discrete event simulations, stochastic processes, and others. The application areas range from semiconductor production to supply chains, protein networks, slime molds, social networks, and whole economies."
Book Synopsis Collaborative Networks and Digital Transformation by : Luis M. Camarinha-Matos
Download or read book Collaborative Networks and Digital Transformation written by Luis M. Camarinha-Matos and published by Springer Nature. This book was released on 2019-09-12 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2019, held in Turin, Italy, in September 2019. The 56 revised full papers were carefully reviewed and selected from 141 submissions. They provide a comprehensive overview of major challenges and recent advances in various domains related to the digital transformation and collaborative networks and their applications with a strong focus on the following areas related to the main theme of the conference: collaborative models, platforms and systems for digital revolution; manufacturing ecosystem and collaboration in Industry 4.0; big data analytics and intelligence; risk, performance, and uncertainty in collaborative networked systems; semantic data/service discovery, retrieval, and composition in a collaborative networked world; trust and sustainability analysis in collaborative networks; value creation and social impact of collaborative networks on the digital revolution; technology development platforms supporting collaborative systems; collective intelligence and collaboration in advanced/emerging applications; and collaborative manufacturing and factories of the future, e-health and care, food and agribusiness, and crisis/disaster management.
Book Synopsis Reconfigurable Manufacturing Systems and Transformable Factories by : Anatoli I. Dashchenko
Download or read book Reconfigurable Manufacturing Systems and Transformable Factories written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2007-06-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dear reader! In your hand you have the second book from the series “XXI Century Techno- gies. ” The first book under the title “Manufacturing Technologies for Machines of the Future” was published by “Springer” in 2003. This book is aimed at solving one of the basic problems in the development of modern machine-building – working out of technologies and manufacturing equipment which would promote the continuous development and improvement of the final product design, rapidly “adaptable” to the requirements of the market as for the quantity, quality, and variety of products manufactured with the lowest cost and minimum time and labor of the product process. In this book the problems of theory and practice of development in the reconfigurable manufacturing systems and transformable factories for various machine-building branches with a focus on automotive industry are discussed. The problems concerning the development of a new class of production systems which in comparison to the flexible manufact- ing systems are composed of a far less quantity of machine-tools (reduced cost of production) are discussed. In comparison to the conventional automated lines (dedicated systems) they make it possible to rapidly transform the equipment for new products manufacturing. The book has some advantages concerning the art of scientific ideas and the presentation of developments.
Book Synopsis Manufacturing System by : Faieza Abdul Aziz
Download or read book Manufacturing System written by Faieza Abdul Aziz and published by BoD – Books on Demand. This book was released on 2012-05-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to bring together selected recent advances, tools, application and new ideas in manufacturing systems. Manufacturing system comprise of equipment, products, people, information, control and support functions for the competitive development to satisfy market needs. It provides a comprehensive collection of papers on the latest fundamental and applied industrial research. The book will be of great interest to those involved in manufacturing engineering, systems and management and those involved in manufacturing research.
Book Synopsis Production System Models of Learning and Development by : David Klahr
Download or read book Production System Models of Learning and Development written by David Klahr and published by MIT Press. This book was released on 1987 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cognitive psychologists have found the production systems class of computer simulation models to be one of the most direct ways to cast complex theories of human intelligence. There have been many scattered studies on production systems since they were first proposed as computational models of human problem-solving behavior by Allen Newell some twenty years ago, but this is the first book to focus exclusively on these important models of human cognition, collecting and giving many of the best examples of current research. In the first chapter, Robert Neches, Pat Langley, and David Klahr provide an overview of the fundamental issues involved in using production systems as a medium for theorizing about cognitive processes, emphasizing their theoretical power. The remaining chapters take up learning by doing and learning by understanding, discrimination learning, learning through incremental refinement, learning by chunking, procedural earning, and learning by composition. A model of cognitive development called BAIRN is described, and a final chapter reviews John Anderson's ACT theory and discusses how it can be used in intelligent tutoring systems, including one that teaches LISP programming skills. In addition to the editors, the contributors are Yuichiro Anzai (Hokkaido University, Japan), Paul Rosenbloom (Stanford) and Allen Newell (Carnegie-Mellon), Stellan Ohlsson (University of Pittsburgh), Clayton Lewis (University of Colorado, Boulder), Iain Wallace and Kevin Bluff (Deakon University, Australia), and John Anderson (Carnegie-Mellon). David Klahr is Professor and Head of the Department of Psychology at Carnegie-Mellon University. Pat Langley is Associate Professor, Department ofInformation and Computer Science, University of California, Irvine, and Robert Neches is Research Computer Scientist at University of Southern California Information Sciences Institute. "Production System Models of Learning and Development" is included in the series Computational Models of Cognition and Perception, edited by Jerome A. Feldman, Patrick J. Hayes, and David E.Rumelhart. A Bradford Book.
Book Synopsis Advanced Automation Techniques In Adaptive Material Processing by : Xiaoqi Chen
Download or read book Advanced Automation Techniques In Adaptive Material Processing written by Xiaoqi Chen and published by World Scientific. This book was released on 2002-09-06 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the editors' research as well as related recent findings on the applications of modern technologies in electrical and electronic engineering to the automation of some of the common manufacturing processes that have traditionally been handled within the mechanical and material engineering disciplines.In particular, the book includes the latest research results achieved through applied research and development projects over the past few years at the Gintic Institute of Manufacturing Technology, Singapore. It discusses advanced automation technologies such as in-process sensors, laser vision systems, and laser strobe vision, as well as advanced techniques such as sensory signal processing, adaptive process control, fuzzy logic, neural networks, expert systems, laser processing control, etc. The methodologies and techniques are applied to some important material processing applications, including grinding, polishing, machining, and welding. Practical automation solutions, which are complicated by part distortions, tool wear, process dynamics, and variants, are explained.The research efforts featured in the book are driven by industrial needs. They combine theoretical research with practical automation considerations. The techniques developed have been either implemented in the factory or prototyped in the laboratory.
Book Synopsis Adaptive Control with Recurrent High-order Neural Networks by : George A. Rovithakis
Download or read book Adaptive Control with Recurrent High-order Neural Networks written by George A. Rovithakis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Neural networks is one of those areas where an initial burst of enthusiasm and optimism leads to an explosion of papers in the journals and many presentations at conferences but it is only in the last decade that significant theoretical work on stability, convergence and robustness for the use of neural networks in control systems has been tackled. George Rovithakis and Manolis Christodoulou have been interested in these theoretical problems and in the practical aspects of neural network applications to industrial problems. This very welcome addition to the Advances in Industrial Control series provides a succinct report of their research. The neural network model at the core of their work is the Recurrent High Order Neural Network (RHONN) and a complete theoretical and simulation development is presented. Different readers will find different aspects of the development of interest. The last chapter of the monograph discusses the problem of manufacturing or production process scheduling.
Book Synopsis Changeable and Reconfigurable Manufacturing Systems by : Hoda A. ElMaraghy
Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
Book Synopsis The ManuFuture Road by : Francesco Jovane
Download or read book The ManuFuture Road written by Francesco Jovane and published by Springer Science & Business Media. This book was released on 2008-10-23 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing in Europe is under great pressure from structural changes in the global economy. The high technical, social and cultural standards in Europe mean that our manufacturing enterprises lead the world but inevitably production and consumption continues to migrate to regions that allow higher profitability from lower costs of production with the promise of new markets. Structural changes in European industries will influence employment and welfare. However, there are signs of a new High-Adding-Value industrial revolution. This book has the answers that will allow us to avoid the negative consequences of this migration. A new model of future manufacturing – ManuFuture - has been forged in discussion with the world’s leading scientists in manufacturing and many experts from research, industry and economic policy. The results of this, the road to competitive and sustainable manufacturing, are captured in this fundamental book. The generic Model of ManuFuture, a Vision 2020 and a Strategic Research Agenda and the proactive initiatives required are presented here. They show the approach to manufacturing in the age of knowledge and the actions that must be taken.
Book Synopsis Design of Flexible Production Systems by : Tullio Tolio
Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.
Book Synopsis Scheduling in Industry 4.0 and Cloud Manufacturing by : Boris Sokolov
Download or read book Scheduling in Industry 4.0 and Cloud Manufacturing written by Boris Sokolov and published by Springer Nature. This book was released on 2020-06-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has resulted from the activities of IFAC TC 5.2 “Manufacturing Modelling for Management and Control”. The book offers an introduction and advanced techniques of scheduling applications to cloud manufacturing and Industry 4.0 systems for larger audience. This book uncovers fundamental principles and recent developments in the theory and application of scheduling methodology to cloud manufacturing and Industry 4.0. The purpose of this book is to present recent developments in scheduling in cloud manufacturing and Industry 4.0 and to systemize these developments in new taxonomies and methodological principles to shape this new research domain. This book addresses the needs of both researchers and practitioners to uncover the challenges and opportunities of scheduling techniques’ applications to cloud manufacturing and Industry 4.0. For the first time, it comprehensively conceptualizes scheduling in cloud manufacturing and Industry 4.0 systems as a new research domain. The chapters of the book are written by the leading international experts and utilize methods of operations research, industrial engineering and computer science. Such a multi-disciplinary combination is unique and comprehensively deciphers major problem taxonomies, methodologies, and applications to scheduling in cloud manufacturing and Industry 4.0.
Book Synopsis Socio-economic Systems: Paradigms for the Future by : Elena G. Popkova
Download or read book Socio-economic Systems: Paradigms for the Future written by Elena G. Popkova and published by Springer Nature. This book was released on 2021-03-05 with total page 1728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is reflective of a science-based vision of the future development paradigm of economic and social systems. It deals with the digitization as the technological basis for the future development of economic and social systems and presents a review of groundbreaking technologies and prospects for their application. The specific character of the industry and prospects for the application of digital technologies in business are analyzed. A rationale is provided for future prospects for the sustainable development of economic and social systems in a digital economy. The authors determine the process of the formation and development of the information-oriented society, social and educational aspects of the digitization, as well as the institutional framework of the digital future of social and economic systems. The book combines the best works following the results of the 12th International Research-to-Practice Conference “Artificial Intelligence: Anthropogenic Nature vs. Social Origin” that was held by the Institute of Scientific Communications (ISC) in cooperation with the Siberian Federal University and the Krasnoyarsk Regional Fund of support of scientific and scientific–technical activities on 5–7 December 2019, in Krasnoyarsk, Russia, as well as following the results of the 3rd International Research-to-Practice Conference “Economic and Social Systems: Paradigms for the Future” that was held by the ISC in cooperation with the Pyatigorsk State University on 5–6 February 2020. The target audience of the book consists of representatives of the academic community concerned with the future prospects for the development of economic and social systems, as well as economic agents engaged in the digitization of business processes, and representatives of public agencies regulating the development of business systems for their progressivity, sustainability and competitiveness.
Book Synopsis Multi-Agent-Based Production Planning and Control by : Jie Zhang
Download or read book Multi-Agent-Based Production Planning and Control written by Jie Zhang and published by John Wiley & Sons. This book was released on 2017-08-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the crossroads of artificial intelligence, manufacturing engineering, operational research and industrial engineering and management, multi-agent based production planning and control is an intelligent and industrially crucial technology with increasing importance. This book provides a complete overview of multi-agent based methods for today’s competitive manufacturing environment, including the Job Shop Manufacturing and Re-entrant Manufacturing processes. In addition to the basic control and scheduling systems, the author also highlights advance research in numerical optimization methods and wireless sensor networks and their impact on intelligent production planning and control system operation. Enables students, researchers and engineers to understand the fundamentals and theories of multi-agent based production planning and control Written by an author with more than 20 years’ experience in studying and formulating a complete theoretical system in production planning technologies Fully illustrated throughout, the methods for production planning, scheduling and controlling are presented using experiments, numerical simulations and theoretical analysis Comprehensive and concise, Multi-Agent Based Production Planning and Control is aimed at the practicing engineer and graduate student in industrial engineering, operational research, and mechanical engineering. It is also a handy guide for advanced students in artificial intelligence and computer engineering.
