Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads
Download Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads full books in PDF, epub, and Kindle. Read online Verification And Calibration Of The Design Methods For Rock Socketed Drilled Shafts For Lateral Loads ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Design of Rock Socketed Drilled Shafts by : Jamal Nusairat
Download or read book Design of Rock Socketed Drilled Shafts written by Jamal Nusairat and published by . This book was released on 2006 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project was aimed at evaluating and developing design methods for laterally loaded drilled shafts socketed in rock. Five lateral load tests on rock socketed drilled shafts with full range of instrumentation were conducted in Ohio. Detailed instrumentation included the use of vibrating wire strain gages, inclinometers, dial gages, and load cells. P-y curves representing site-specific lateral shaft-rock interaction were deduced from strain data. Field testing included the use of a borehole pressuremeter/dilatometer to obtain measurements that were correlated with rock mass strength and deformation parameters as well as with p-y curves. A comparison was made between the baseline p-y curves deduced from strain data of lateral load tests, the p-y curves predicted by using Reese's interim criterion, and the p-y curves from the pressuremeter tests in rock. A new hyperbolic p-y criterion for rock is proposed based on the field test data and extensive theoretical work. Validation of the proposed p-y criterion of rock was carried out by comparing the predictions of shaft deflections and bending moments using the hyperbolic p-y criterion against actual lateral load tests results. Based on the findings of this study, a complete solution for the design of drilled shafts socketed in rock or intermediate geomaterials under lateral loads is provided.
Book Synopsis Rock-socketed Shafts for Highway Structure Foundations by : John P. Turner
Download or read book Rock-socketed Shafts for Highway Structure Foundations written by John P. Turner and published by Transportation Research Board. This book was released on 2006 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.
Book Synopsis Drilled Shafts by : Michael W. O'Neill
Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Drilled Shafts in Rock by : Lianyang Zhang
Download or read book Drilled Shafts in Rock written by Lianyang Zhang and published by CRC Press. This book was released on 2004-05-15 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drilled shafts in rock are widely used as foundations of heavy structures such as highway bridges and tall buildings. Although much has been learned about the analysis and design of drilled shafts in rock, all the major findings are published in the form of reports and articles in technical journals and conference proceedings. This book i
Download or read book Piles in Weak Rock written by and published by Thomas Telford. This book was released on 1977 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis NCHRP Synthesis 360 by : John Turner
Download or read book NCHRP Synthesis 360 written by John Turner and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Contemporary Topics in Deep Foundations by : Magued Iskander
Download or read book Contemporary Topics in Deep Foundations written by Magued Iskander and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 185 contains 80 papers presented at the International Foundation Congress and Equipment Expo held in Orlando, Florida, March 15-19, 2009.
Book Synopsis Handbook of Geotechnical Investigation and Design Tables by : Burt G. Look
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Book Synopsis Dissertation Abstracts International by :
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Geotechnical Instrumentation for Monitoring Field Performance by : John Dunnicliff
Download or read book Geotechnical Instrumentation for Monitoring Field Performance written by John Dunnicliff and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on the subject written by a practitioner forpractitioners. Geotechnical Instrumentation for Monitoring FieldPerformance Geotechnical Instrumentation for Monitoring FieldPerformance goes far beyond a mere summary of the technicalliterature and manufacturers’ brochures: it guides readersthrough the entire geotechnical instrumentation process, showingthem when to monitor safety and performance, and how to do it well.This comprehensive guide: * Describes the critical steps of planning monitoring programsusing geotechnical instrumentation, including what benefits can beachieved and how construction specifications should bewritten * Describes and evaluates monitoring methods and recommendsinstruments for monitoring groundwater pressure, deformations,total stress in soil, stress change in rock, temperature, and loadand strain in structural members * Offers detailed practical guidelines on instrument calibrations,installation and maintenance, and on the collection, processing,and interpretation of instrumentation data * Describes the role of geotechnical instrumentation during theconstruction and operation phases of civil engineering projects,including braced excavations, embankments on soft ground,embankment dams, excavated and natural slopes, undergroundexcavations, driving piles, and drilled shafts * Provides guidelines throughout the book on the best practices
Book Synopsis Tall Building Foundation Design by : Harry G. Poulos
Download or read book Tall Building Foundation Design written by Harry G. Poulos and published by CRC Press. This book was released on 2017-07-20 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the design of foundations for tall buildings. After a general review of the characteristics of tall buildings, various foundation options are discussed followed by the general principles of foundation design as applied to tall buildings. Considerable attention is paid to the methods of assessment of the geotechnical design parameters, as this is a critical component of the design process. A detailed treatment is then given to foundation design for various conditions, including ultimate stability, serviceability, ground movements, dynamic loadings and seismic loadings. Basement wall design is also addressed. The last part of the book deals with pile load testing and foundation performance measurement, and finally, the description of a number of case histories. A feature of the book is the emphasis it places on the various stages of foundation design: preliminary, detailed and final, and the presentation of a number of relevant methods of design associated with each stage.
Book Synopsis Correlations of Soil and Rock Properties in Geotechnical Engineering by : Jay Ameratunga
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Book Synopsis Foundation Design: Principles and Practices by : Donald P. Coduto
Download or read book Foundation Design: Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Book Synopsis Analysis of Laterally Loaded Piles in Multilayered Soil Deposits by : Dipanjan Basu
Download or read book Analysis of Laterally Loaded Piles in Multilayered Soil Deposits written by Dipanjan Basu and published by Purdue University Press. This book was released on 2007-10-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.
Book Synopsis Pile Design and Construction Practice, Fifth Edition by : Michael Tomlinson
Download or read book Pile Design and Construction Practice, Fifth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2007-12-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.
Book Synopsis Rock Foundations by : United States. Army. Corps of Engineers
Download or read book Rock Foundations written by United States. Army. Corps of Engineers and published by . This book was released on 1994 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Evaluation of Soil and Rock Properties by : P. J. Sabatini
Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
