Treatment Of Imperfections In Precast Structural Elements

Download Treatment Of Imperfections In Precast Structural Elements full books in PDF, epub, and Kindle. Read online Treatment Of Imperfections In Precast Structural Elements ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Treatment of Imperfections in Precast Structural Elements

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883940819
Total Pages : 74 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Treatment of Imperfections in Precast Structural Elements by : fib Fédération internationale du béton

Download or read book Treatment of Imperfections in Precast Structural Elements written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2007-01-01 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 41 addresses the most common types of imperfections encountered during the manufacture, stacking, transport and erection of precast concrete structural elements, and suggests a number of possible remedial actions. The remedial actions depend on the severity of the imperfection, the feasibility of repair and the consequences on the intended use of the concrete member. Imperfections in concrete structures are impossible to avoid and can range from minor surface blemishes to major structural defects. Because many imperfections are at the limits of specified quality deviations, or are not included in the acceptance criteria, the problem is more complex than a decision between rejection or acceptance. This document deals with precast concrete elements that do not meet the quality as intended in the design. It compares imperfections in quality to the specified requirements so that the effect of the imperfection can be evaluated. Recommendations are provided on methods to prevent such imperfections, the effect they can have and any necessary actions for rectification. The bulletin applies to prefabricated concrete members made of reinforced or prestressed normal weight concrete. Products include beams and columns, concrete walls, hollow core slabs, double tees, planks and beams for beam and block floors. Water retaining structures are outside the scope of this document.

Structural Concrete, Volume 2

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883940924
Total Pages : 349 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Structural Concrete, Volume 2 by : fib Fédération internationale du béton

Download or read book Structural Concrete, Volume 2 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-01-01 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.

Design of precast concrete structures against accidental actions

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883941033
Total Pages : 84 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Design of precast concrete structures against accidental actions by : fib Fédération internationale du béton

Download or read book Design of precast concrete structures against accidental actions written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-01-01 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1980’s, several buildings throughout the world have been subject to gas explosions, impact by cars or airplanes, or car bomb attacks. In many cases the effect of the impact or explosion has been the failure of a critical structural member at the perimeter of the building. After the failure, the load supported by that member could not be redistributed and part or all of the structure has collapsed in a progressive manner. The phenomenon that occurs when local failure is not confined to the area of initial distress, and spreads horizontally and/or vertically through the structure, is termed progressive collapse. Progressive collapse is a relatively rare event, as it requires both an accidental action to cause local damage and a structure that lacks adequate continuity, ductility, and redundancy to prevent the spread of damage. It is technically very difficult and economically prohibitive to design buildings for absolute safety. However it is possible to construct precast concrete buildings that afford an acceptable degree of safety with regard to accidental actions. A structure is normally designed to respond properly, without damage, under normal load conditions, but local and/or global damages cannot be avoided under the effect of an unexpected, but moderate degree of accidental overload. Properly designed and constructed structures usually possess reasonable probability not to collapse catastrophically under such loads, depending on different factors, for example: the type of loading; the degree and the location of accidental loading in regard to the structure and its structural members; the type of structural system, the construction technology, and the spans between structural vertical members, etc. No structure can be expected to be totally resistant to actions arising from an unexpected and extreme cause, but it should not be damaged to an extent that is disproportionate to the original cause. The aim of fib Bulletin 63 is to summarize the present knowledge on the subject and to provide guidance for the design of precast structures against progressive collapse. This is addressed in terms of (a) the classification of the actions, (b) their effect on the structural types, (c) the strategies to cope with such actions, (d) the design methods and (e) some typical detailing, all supplemented with illustrations from around the world, and some model calculations.

Planning and design handbook on precast building structures

Author : FIB - Féd. Int. du Béton
Publisher : FIB - Féd. Int. du Béton
ISBN 13 : 2883941149
Total Pages : 325 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Planning and design handbook on precast building structures by : FIB - Féd. Int. du Béton

Download or read book Planning and design handbook on precast building structures written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2014 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1994 fib Commission 6: Prefabrication edited a successful Planning and Design Handbook that ran to approximately 45,000 copies and was published in Spanish and German. Nearly 20 years later Bulletin 74 brings that first publication up to date. It offers a synthesis of the latest structural design knowledge about precast building structures against the background of 21st century technological innovations in materials, production and construction. With it, we hope to help architects and engineers achieve a full understanding of precast concrete building structures, the possibilities they offer and their specific design philosophy. It was principally written for non-seismic structures. The handbook contains eleven chapters, each dealing with a specific aspect of precast building structures. The first chapter of the handbook highlights best practice opportunities that will enable architects, design engineers and contractors to work together towards finding efficient solutions, which is something unique to precast concrete buildings. The second chapter offers basic design recommendations that take into account the possibilities, restrictions and advantages of precast concrete, along with its detailing, manufacture, transport, erection and serviceability stages. Chapter three describes the precast solutions for the most common types of buildings such as offices, sports stadiums, residential buildings, hotels, industrial warehouses and car parks. Different application possibilities are explored to teach us which types of precast units are commonly used in all those situations. Chapter four covers the basic design principles and systems related to stability. Precast concrete structures should be designed according to a specific stability concept, unlike cast in-situ structures. Chapter five discusses structural connections. Chapters six to nine address the four most commonly used systems or subsystems of precast concrete in buildings, namely, portal and skeletal structures, wall-frame structures, floor and roof structures and architectural concrete facades. In chapter ten the design and detailing of a number of specific construction details in precast elements are discussed, for example, supports, corbels, openings and cutouts in the units, special features related to the detailing of the reinforcement, and so forth. Chapter eleven gives guidelines for the fire design of precast concrete structures. The handbook concludes with a list of references to good literature on precast concrete construction.

Shear and Punching Shear in RC and FRC Elements

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883940975
Total Pages : 274 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Shear and Punching Shear in RC and FRC Elements by : fib Fédération internationale du béton

Download or read book Shear and Punching Shear in RC and FRC Elements written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-12-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 57 is a collection of contributions from a workshop on "Recent developments on shear and punching shear in RC and FRC elements", held in Salò, Italy, in October 2010. Shear is one of a few areas of research into fundamentals of the behaviour of concrete structures where contention remains amongst researchers. There is a continuing debate between researchers from a structures perspective and those from a materials or fracture mechanics perspective about the mechanisms that enable the force flow through a concrete member and across cracks. In 2009, a Working Group was formed within fib Task Group 4.2 "Ultimate Limit State Models" to harmonise different ideas about design procedures for shear and punching. An important outcome of this work was the ensuing discussions between experts and practitioners regarding the shear and punching provisions of the draft fib Model Code, which led to the organization of the Salò workshop. Invited experts in the field of shear and FRC gave 18 lectures at the workshop that was attended by 72 participants from 12 countries in 3 different continents. The contributions from this conference as compiled in this bulletin are believed to represent the best of the current state of knowledge. They certainly are of general interest to fib members and especially helpful in the finalization of the 2010 fibModel Code. It is hoped that this publication will stimulate further research in the field, to refine and harmonize the available analytical models and tools for shear and punching design.

Integrated life cycle assessment of concrete structures

Author : fib Fédération Internationale du béton
Publisher : fib Fédération Internationale du béton
ISBN 13 : 2883941114
Total Pages : 70 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Integrated life cycle assessment of concrete structures by : fib Fédération Internationale du béton

Download or read book Integrated life cycle assessment of concrete structures written by fib Fédération Internationale du béton and published by fib Fédération Internationale du béton. This book was released on 2013-09-03 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is after water the second most used material. The production of concrete in the industrialized countries annually amounts to 1.5-3 tonne per capita and is still increasing. This has significant impact on the environment. Thus there is an urgent need for more effective use of concrete in structures and their assessment. The scope of activities of the fib Task Group 3.7 was to define the methodology for integrated life-cycle assessment of concrete structures considering main essential aspects of sustainability such as: environmental, economic and social aspects throughout the whole life of the concrete structure. The aim was to set up basic methodology to be helpful in development of design and assessment tools focused on sustainability of concrete structure within the whole life cycle. Integrated Life Cycle Assessment (ILCA) represents an advanced approach integrating different aspects of sustainability in one complex assessment procedure. The integrated approach is necessary to insure that the structure will serve during the whole expected service life with a maximum functional quality and safety, while environmental and economic loads will be kept at a low level. The effective application and quality of results are dependent on the availability of relevant input data obtained using a detailed inventory analysis, based on specific regional conditions. The evaluation of the real level of total quality of concrete structure should be based on a detailed ILCA analysis using regionally or locally relevant data sets.

Precast-concrete buildings in seismic areas

Author : FIB – Féd. Int. du Béton
Publisher : FIB - Féd. Int. du Béton
ISBN 13 : 2883941181
Total Pages : 290 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Precast-concrete buildings in seismic areas by : FIB – Féd. Int. du Béton

Download or read book Precast-concrete buildings in seismic areas written by FIB – Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document has a broad scope and is not focussed on design issues. Precast construction under seismic conditions is treated as a whole. The main principles of seismic design of different structural systems, their behavior and their construction techniques are presented through rules, construction steps and sequences, procedures, and details that should lead to precast structures built in seismic areas complying with the fundamental performance requirements of collapse prevention and life safety in major earthquakes and limited damage in more frequent earthquakes. The content of this document is largely limited to conventional precast construction and, although some information is provided on the well-known “PRESSS technology” (jointed ductile dry connections), this latter solution is not treated in detail in this document. The general overview, contained in this document, of alternative structural systems and connection solutions available to achieve desired performance levels, intends to provide engineers, architects, clients, and end-users (in general) with a better appreciation of the wide range of applications that modern precast concrete technology can have in various types of construction from industrial to commercial as well as residential. Lastly, the emphasis on practical aspects, from conceptual design to connection detailing, aims to help engineers to move away from the habit of blindly following prescriptive codes in their design, but instead go back to basic principles, in order to achieve a more robust understanding, and thus control, of the seismic behaviour of the structural system as a whole, as well as of its components and individual connections.

Concrete Structures for Oil and Gas Fields in Hostile Marine Environments

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883940908
Total Pages : 38 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Concrete Structures for Oil and Gas Fields in Hostile Marine Environments by : fib Fédération internationale du béton

Download or read book Concrete Structures for Oil and Gas Fields in Hostile Marine Environments written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-12-01 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete offshore structures have been successfully delivered to the international oil and gas industry for more than 35 years. Some 50 major concrete platforms of different shapes and sizes, supporting large production and storage facilities, are currently operating in hostile marine environments worldwide and have excellent service records. After some years with little development activity, today there is a renewed interest in robust structures for the Arctic environment, for Liquefied Natural Gas (LNG) terminals and for special floating barges and vessels. Currently, concrete solutions are being considered for projects north and east of Russia, north of Norway and offshore Newfoundland, among others. Concrete is also in increasing demand in built up coastal areas for a variety of purposes such as harbour works, tunnels and bridges, cargo terminals, parking garages and sea front housing developments where durability and robustness are essential. The mandate of fib Task Group 1.5 was to gather the experience and know-how pertinent to the development, design and execution of offshore concrete structures, and to elaborate on the applicability of concrete structures for the Arctic environments. The findings of the Task Group are presented in fib Bulletin 50. The report is based on experience gained from the design, execution and performance of a number of offshore concrete structures around the world and in particular in the North Sea. Ongoing inspections have shown excellent durability and structural performance, even in structures that have exceeded their design lives, in conditions often characterized by extreme wave loads, freezing conditions, hurricane force winds and seismic actions. This forms the "background" for discussing the applicability of concrete structures for the Arctic regions. Although to a large extent dedicated to oil- and gas- related structures, the report is also relevant to other marine applications where the same design principles, material selection criteria and construction methods apply. fib Bulletin 50 is not in itself a code, nor is it a textbook. Rather, extensive reference is made to proven and readily available design codes and construction guides, as well as relevant papers and proceedings and other fib publications.

Concrete Structure Management - Guide to Ownership and Good Practice

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883940843
Total Pages : 211 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Concrete Structure Management - Guide to Ownership and Good Practice by : fib Fédération internationale du béton

Download or read book Concrete Structure Management - Guide to Ownership and Good Practice written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction projects are undertaken to meet a variety of business, service and aspirational objectives and needs. The success of a building or an element of infrastructure depends on how well it meets the owner's needs and interests or those of the users. Recent changes in owner attitudes to construction are reflected in an increasing interest in through-life costs, i.e. not only the capital costs of construction but also the operational costs associated with a structure's functional performance for a defined life span. The owner can greatly improve the likelihood of achieving the value they seek from the facility by being intimately and effectively involved in the definition of performance requirements at the start of the construction procurement process. The objective of fib Bulletin 44 is to provide guidance to owners of concrete structures on: the management of their concrete structures (buildings and infrastructure) as part of their business goals or the service objectives of their organization; best practice in the management of concrete structures; their responsibilities with respect to the management of their concrete structures; the wider context and issues of service life design; information and direction needed by the supporting professional team of architects, engineers, specifiers, contractors and others. This Guide also provides background information on topics such as deterioration processes and technical procedures used for the management of concrete structures, including reference to international standards for the protection and repair of concrete structures. These activities are illustrated by application examples/case histories and by a section addressing frequently asked questions. A brief review is made of some potential future developments.

Structural Concrete Textbook, Volume 5

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883941025
Total Pages : 482 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Structural Concrete Textbook, Volume 5 by : fib Fédération internationale du béton

Download or read book Structural Concrete Textbook, Volume 5 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-06-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

Structural Concrete Textbook, Volume 4

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883940940
Total Pages : 203 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Structural Concrete Textbook, Volume 4 by : fib Fédération internationale du béton

Download or read book Structural Concrete Textbook, Volume 4 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-06-01 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) to fib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

Guide for Protection and Repair of Concrete Structures

Author : FIB – International Federation for Structural Concrete
Publisher : FIB - International Federation for Structural Concrete
ISBN 13 : 2883941556
Total Pages : 313 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Guide for Protection and Repair of Concrete Structures by : FIB – International Federation for Structural Concrete

Download or read book Guide for Protection and Repair of Concrete Structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2022-03-01 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of preparing a technical document for the repairs and interventions upon concrete structures goes back to the former fib COM5: Structural Service Life Aspects, being the goal of the then TG5.9. After a long period of reduced activity, and taking into account the reorganization of fib commissions that meanwhile took place, on June 2017 a different approach was proposed to push forward the task of TG8.1 (formerly TG5.9). The (new) goal of TG 8.1 was to deliver a ‘how-to-do’ guide, gathering together protection, repair, and strengthening techniques for concrete structures. Chapters are intended to provide both guidelines and case-studies, serving as support to the application of fib MC2020 pre-normative specifications. Each chapter was written by an editorial team comprising desirably at least a researcher, a designer and a contractor. Templates have been prepared in order to harmonize the contents and the presentation of the different methods. Following the writing process, chapters were reviewed by experts and, after amendments by the authors, they underwent a second review process by COM8 and TG3.4 members, as well as by different practitioners. For each protection, repair and strengthening method addressed in this guide, readers have a description of when to adopt it, which materials and systems are required, which techniques are available, and what kind of equipment is needed. It then presents a summary of stakeholders’ roles and qualifications, design guidelines referring to most relevant codes and references, the intervention procedure, quality control measures and monitoring and maintenance activities. Due to the extent of the guide, it was decided to publish it as bulletin 102, addressing protection and repair methods, and bulletin 103, addressing strengthening methods. We would like to thank the authors, reviewers and members of COM8 and TG3.4 for their work in developing this fib Bulletin, which we hope will be useful for professionals working in the field of existing concrete structures, especially those concerned with life-cycle management and conservation activities. As noted above, this Bulletin is also intended to act as a background and supporting document to the next edition of the fib Model Code for Concrete Structures, which is currently under development under the auspices of TG10.1 with the working title of "fib Model Code 2020".

Structural Concrete, Volume 3

Author : fib Fédération internationale du béton
Publisher : fib Fédération internationale du béton
ISBN 13 : 2883940932
Total Pages : 391 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Structural Concrete, Volume 3 by : fib Fédération internationale du béton

Download or read book Structural Concrete, Volume 3 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.

Externally applied FRP reinforcement for concrete structures

Author : FIB – International Federation for Structural Concrete
Publisher : FIB - International Federation for Structural Concrete
ISBN 13 : 2883941327
Total Pages : 242 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Externally applied FRP reinforcement for concrete structures by : FIB – International Federation for Structural Concrete

Download or read book Externally applied FRP reinforcement for concrete structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2019-05-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1996, CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in June 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. Finally, as a result of the restructuring of fib’s Commissions and Task Groups at the end of 2014, the Task Group became fib T5.1 FRP Reinforcement for concrete structures, chaired by Stijn Matthys at Ghent University, in Commission 5 Reinforcements. The work of former TG 9.3 and current T5.1 was performed by two working parties (WP), one of which is “Externally Applied Reinforcement” (EAR), which produced fib bulletin 14 “Externally bonded FRP reinforcement for RC structures” in July 2001. Following a number of years of relatively slow activity, the WP on externally applied reinforcement was reactivated and started working on an update of bulletin 14. The result of this work is summarised in the present technical report, which aims to give design guidelines on the use of externally applied FRP reinforcement (both externally bonded and near-surface mounted) for concrete structures. An attempt has been made to present some of the topics in a Eurocode-compatible format, so that the material covered may form the basis for the introduction of composites in the next version of Eurocode 2 and for the updating of the text on seismic retrofitting with composites in the next version of Eurocode 8. All persons who participated in the preparation of this Bulletin are mentioned in the copyright page. Further acknowledgements are due to Josée Bastien (Canada), Hans Rudolf Ganz (Switzerland) and Luc Taerwe (Belgium) for revision of the document. To all members of the working party on externally applied reinforcement our sincere thanks are expressed for the high quality and extensive work brought in on a voluntary basis.

Safety and performance concept. Reliability assessment of concrete structures

Author : fib Fédération internationale du béton
Publisher : FIB - Féd. Int. du Béton
ISBN 13 : 2883941262
Total Pages : 375 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Safety and performance concept. Reliability assessment of concrete structures by : fib Fédération internationale du béton

Download or read book Safety and performance concept. Reliability assessment of concrete structures written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2018-08-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures have been built for more than 100 years. At first, reinforced concrete was used for buildings and bridges, even for those with large spans. Lack of methods for structural analysis led to conservative and reliable design. Application of prestressed concrete started in the 40s and strongly developed in the 60s. The spans of bridges and other structures like halls, industrial structures, stands, etc. grew significantly larger. At that time, the knowledge of material behaviour, durability and overall structural performance was substantially less developed than it is today. In many countries statically determined systems with a fragile behavior were designed for cast in situ as well as precast structures. Lack of redundancy resulted in a low level of robustness in structural systems. In addition, the technical level of individual technologies (e.g. grouting of prestressed cables) was lower than it is today. The number of concrete structures, including prestressed ones, is extremely high. Over time and with increased loading, the necessity of maintaining safety and performance parameters is impossible without careful maintenance, smaller interventions, strengthening and even larger reconstructions. Although some claim that unsatisfactory structures should be replaced by new ones, it is often impossible, as authorities, in general, have only limited resources. Most structures have to remain in service, probably even longer than initially expected. In order to keep the existing concrete structures in an acceptable condition, the development of methods for monitoring, inspection and assessment, structural identification, nonlinear analysis, life cycle evaluation and safety and prediction of the future behaviour, etc. is necessary. The scatter of individual input parameters must be considered as a whole. This requires probabilistic approaches to individual partial problems and to the overall analysis. The members of the fib Task Group 2.8 “Safety and performance concepts” wrote, on the basis of the actual knowledge and experience, a comprehensive document that provides crucial knowledge for existing structures, which is also applicable to new structures. This guide to good practice is divided into 10 basic chapters dealing with individual issues that are critical for activities associated with preferably existing concrete structures. Bulletin 86 starts with the specification of the performance-based requirements during the entire lifecycle. The risk issues are described in chapter two. An extensive part is devoted to structural reliability, including practical engineering approaches and reliability assessment of existing structures. Safety concepts for design consider the lifetime of structures and summarise safety formats from simple partial safety factors to develop approaches suitable for application in sophisticated, probabilistic, non-linear analyses. Testing for design and the determination of design values from the tests is an extremely important issue. This is especially true for the evaluation of existing structures. Inspection and monitoring of existing structures are essential for maintenance, for the prediction of remaining service life and for the planning of interventions. Chapter nine presents probabilistically-based models for material degradation processes. Finally, case studies are presented in chapter ten. The results of the concrete structures monitoring as well as their application for assessment and prediction of their future behaviour are shown. The risk analysis of highway bridges was based on extensive monitoring and numerical evaluation programs. Case studies perfectly illustrate the application of the methods presented in the Bulletin. The information provided in this guide is very useful for practitioners and scientists. It provides the reader with general procedures, from the specification of requirements, monitoring, assessment to the prediction of the structures’ lifecycles. However, one must have a sufficiently large amount of experimental and other data (e.g. construction experience) in order to use these methods correctly. This data finally allows for a statistical evaluation. As it is shown in case studies, extensive monitoring programs are necessary. The publication of this guide and other documents developed within the fib will hopefully help convince the authorities responsible for safe and fluent traffic on bridges and other structures that the costs spent in monitoring are first rather small, and second, they will repay in the form of a serious assessment providing necessary information for decision about maintenance and future of important structures.

Birth Certificate and Through-Life Management Documentation

Author : FIB – International Federation for Structural Concrete
Publisher : FIB - International Federation for Structural Concrete
ISBN 13 : 2883941378
Total Pages : 98 pages
Book Rating : 4.8/5 (839 download)

DOWNLOAD NOW!

Book Synopsis Birth Certificate and Through-Life Management Documentation by : FIB – International Federation for Structural Concrete

Download or read book Birth Certificate and Through-Life Management Documentation written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2020-06-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: While it is generally accepted by owners and users that vehicles such as airplanes or cars must be subjected to a pre-defined maintenance plan during their lifetime, this is less obvious in public opinion for engineering structures and buildings. This may be related to the general feeling that “moving objects” should be more sensitive to aging and deterioration than “structures anchored in ground”! This may also relate to the fact that detailed maintenance manuals, which are considered obligatory by insurance companies, are generally for aircraft, boats and cars, but not systematically for civil engineering structures, except for iconic or major projects. The performance-based approach to the durability design and assessment of concrete structures is also becoming increasingly popular in the construction sector. In recent years, numerous studies have been carried out worldwide in order to better assess the expected properties related to the durability of concrete. This has led to the standardization of test protocols, but also to a better understanding of the main parameters impacting the overall durability of concrete. Documentation related to durability indicators will then become increasingly necessary for the accurate implementation of a performance-based approach that enables the promotion of sustainable materials. Durability models have a strong need for relevant in-field data feedback in order to define accurate inputs for modelling both during the design process (gathered from previous projects) and during the follow-up process to allow for re-calibration of inputs and re-assessment of durability expectations by the models if judged necessary. A framework for data collection was therefore considered extremely importance by the fib Commission 8: Durability, and is the objective of this fib Technical report “Birth-certificate and Through-Life Management Documentation”. It is indeed very important to collect relevant data within a comprehensive and standardized format, as now proposed by this fib Bulletin. Thanks to its pre-defined format, compatible with the general fib framework, “Birth-certificate and Through-Life Management Documentation” will definitively be useful to owners for the maintenance plan and intervention strategies of their assets. This operational technical report will also be very useful for designers, as it should encourage the collection of relevant information in databases to be used for future projects where a realistic assessment of expected properties is considered through largely similar concrete mix designs under given exposure conditions. The Commission, which deals with durability aspects, hopes that this Bulletin will provide users a valuable tool and perspective on service life management issues.

CONCRETE Innovations in Materials, Design and Structures

Author : FIB – International Federation for Structural Concrete
Publisher : FIB - Féd. Int. du Béton
ISBN 13 : 2940643008
Total Pages : 2322 pages
Book Rating : 4.9/5 (46 download)

DOWNLOAD NOW!

Book Synopsis CONCRETE Innovations in Materials, Design and Structures by : FIB – International Federation for Structural Concrete

Download or read book CONCRETE Innovations in Materials, Design and Structures written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2019-05-27 with total page 2322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers of the fib Symposium “CONCRETE Innovations in Materials, Design and Structures”, which was held in May 2019 in Kraków, Poland. This annual symposium was co-organised by the Cracow University of Technology. The topics covered include Analysis and Design, Sustainability, Durability, Structures, Materials, and Prefabrication. The fib, Fédération internationale du béton, is a not-for-profit association formed by 45 national member groups and approximately 1000 corporate and individual members. The fib’s mission is to develop at an international level the study of scientific and practical matters capable of advancing the technical, economic, aesthetic and environmental performance of concrete construction. The fib, was formed in 1998 by the merger of the Euro-International Committee for Concrete (the CEB) and the International Federation for Prestressing (the FIP). These predecessor organizations existed independently since 1953 and 1952, respectively.