Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Student Academic Performance Analysis And Prediction Using Machine Learning With Python
Download Student Academic Performance Analysis And Prediction Using Machine Learning With Python full books in PDF, epub, and Kindle. Read online Student Academic Performance Analysis And Prediction Using Machine Learning With Python ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis HIGHER EDUCATION STUDENT ACADEMIC PERFORMANCE ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON GUI by : Vivian Siahaan
Download or read book HIGHER EDUCATION STUDENT ACADEMIC PERFORMANCE ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON GUI written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2022-04-24 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dataset used in this project was collected from the Faculty of Engineering and Faculty of Educational Sciences students in 2019. The purpose is to predict students' end-of-term performances using ML techniques. Attribute information in the dataset are as follows: Student ID; Student Age (1: 18-21, 2: 22-25, 3: above 26); Sex (1: female, 2: male); Graduated high-school type: (1: private, 2: state, 3: other); Scholarship type: (1: None, 2: 25%, 3: 50%, 4: 75%, 5: Full); Additional work: (1: Yes, 2: No); Regular artistic or sports activity: (1: Yes, 2: No); Do you have a partner: (1: Yes, 2: No); Total salary if available (1: USD 135-200, 2: USD 201-270, 3: USD 271-340, 4: USD 341-410, 5: above 410); Transportation to the university: (1: Bus, 2: Private car/taxi, 3: bicycle, 4: Other); Accommodation type in Cyprus: (1: rental, 2: dormitory, 3: with family, 4: Other); Mother's education: (1: primary school, 2: secondary school, 3: high school, 4: university, 5: MSc., 6: Ph.D.); Father's education: (1: primary school, 2: secondary school, 3: high school, 4: university, 5: MSc., 6: Ph.D.); Number of sisters/brothers (if available): (1: 1, 2:, 2, 3: 3, 4: 4, 5: 5 or above); Parental status: (1: married, 2: divorced, 3: died - one of them or both); Mother's occupation: (1: retired, 2: housewife, 3: government officer, 4: private sector employee, 5: self-employment, 6: other); Father's occupation: (1: retired, 2: government officer, 3: private sector employee, 4: self-employment, 5: other); Weekly study hours: (1: None, 2: <5 hours, 3: 6-10 hours, 4: 11-20 hours, 5: more than 20 hours); Reading frequency (non-scientific books/journals): (1: None, 2: Sometimes, 3: Often); Reading frequency (scientific books/journals): (1: None, 2: Sometimes, 3: Often); Attendance to the seminars/conferences related to the department: (1: Yes, 2: No); Impact of your projects/activities on your success: (1: positive, 2: negative, 3: neutral); Attendance to classes (1: always, 2: sometimes, 3: never); Preparation to midterm exams 1: (1: alone, 2: with friends, 3: not applicable); Preparation to midterm exams 2: (1: closest date to the exam, 2: regularly during the semester, 3: never); Taking notes in classes: (1: never, 2: sometimes, 3: always); Listening in classes: (1: never, 2: sometimes, 3: always); Discussion improves my interest and success in the course: (1: never, 2: sometimes, 3: always); Flip-classroom: (1: not useful, 2: useful, 3: not applicable); Cumulative grade point average in the last semester (/4.00): (1: <2.00, 2: 2.00-2.49, 3: 2.50-2.99, 4: 3.00-3.49, 5: above 3.49); Expected Cumulative grade point average in the graduation (/4.00): (1: <2.00, 2: 2.00-2.49, 3: 2.50-2.99, 4: 3.00-3.49, 5: above 3.49); Course ID; and OUTPUT: Grade (0: Fail, 1: DD, 2: DC, 3: CC, 4: CB, 5: BB, 6: BA, 7: AA). The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier. Three feature scaling used in machine learning are raw, minmax scaler, and standard scaler. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, decision boundaries, performance of the model, scalability of the model, training loss, and training accuracy.
Book Synopsis STUDENT ACADEMIC PERFORMANCE ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON by : Vivian Siahaan
Download or read book STUDENT ACADEMIC PERFORMANCE ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2022-03-20 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dataset used in this project consists of student achievement in secondary education of two Portuguese schools. The data attributes include student grades, demographic, social and school-related features) and it was collected by using school reports and questionnaires. Two datasets are provided regarding the performance in two distinct subjects: Mathematics (mat) and Portuguese language (por). In the two datasets were modeled under binary/five-level classification and regression tasks. Important note: the target attribute G3 has a strong correlation with attributes G2 and G1. This occurs because G3 is the final year grade (issued at the 3rd period), while G1 and G2 correspond to the 1st and 2nd period grades. It is more difficult to predict G3 without G2 and G1, but such prediction is much more useful. Attributes in the dataset are as follows: school - student's school (binary: 'GP' - Gabriel Pereira or 'MS' - Mousinho da Silveira); sex - student's sex (binary: 'F' - female or 'M' - male); age - student's age (numeric: from 15 to 22); address - student's home address type (binary: 'U' - urban or 'R' - rural); famsize - family size (binary: 'LE3' - less or equal to 3 or 'GT3' - greater than 3); Pstatus - parent's cohabitation status (binary: 'T' - living together or 'A' - apart); Medu - mother's education (numeric: 0 - none, 1 - primary education (4th grade), 2 - 5th to 9th grade, 3 - secondary education or 4 - higher education); Fedu - father's education (numeric: 0 - none, 1 - primary education (4th grade), 2 - 5th to 9th grade, 3 - secondary education or 4 - higher education); Mjob - mother's job (nominal: 'teacher', 'health' care related, civil 'services' (e.g. administrative or police), 'at_home' or 'other'); Fjob - father's job (nominal: 'teacher', 'health' care related, civil 'services' (e.g. administrative or police), 'at_home' or 'other'); reason - reason to choose this school (nominal: close to 'home', school 'reputation', 'course' preference or 'other'); guardian - student's guardian (nominal: 'mother', 'father' or 'other'); traveltime - home to school travel time (numeric: 1 - <15 min., 2 - 15 to 30 min., 3 - 30 min. to 1 hour, or 4 - >1 hour); studytime - weekly study time (numeric: 1 - <2 hours, 2 - 2 to 5 hours, 3 - 5 to 10 hours, or 4 - >10 hours); failures - number of past class failures (numeric: n if 1<=n<3, else 4); schoolsup - extra educational support (binary: yes or no); famsup - family educational support (binary: yes or no); paid - extra paid classes within the course subject (Math or Portuguese) (binary: yes or no); activities - extra-curricular activities (binary: yes or no); nursery - attended nursery school (binary: yes or no); higher - wants to take higher education (binary: yes or no); internet - Internet access at home (binary: yes or no); romantic - with a romantic relationship (binary: yes or no); famrel - quality of family relationships (numeric: from 1 - very bad to 5 - excellent); freetime - free time after school (numeric: from 1 - very low to 5 - very high); goout - going out with friends (numeric: from 1 - very low to 5 - very high); Dalc - workday alcohol consumption (numeric: from 1 - very low to 5 - very high); Walc - weekend alcohol consumption (numeric: from 1 - very low to 5 - very high); health - current health status (numeric: from 1 - very bad to 5 - very good); absences - number of school absences (numeric: from 0 to 93); G1 - first period grade (numeric: from 0 to 20); G2 - second period grade (numeric: from 0 to 20); and G3 - final grade (numeric: from 0 to 20, output target). The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier. Three feature scaling used in machine learning are raw, minmax scaler, and standard scaler. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, decision boundaries, performance of the model, scalability of the model, training loss, and training accuracy.
Book Synopsis Evolution in Computational Intelligence by : Vikrant Bhateja
Download or read book Evolution in Computational Intelligence written by Vikrant Bhateja and published by Springer Nature. This book was released on 2020-09-08 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of 8th International Conference on Frontiers of Intelligent Computing: Theory and Applications (FICTA 2020), which aims to bring together researchers, scientists, engineers and practitioners to share new ideas and experiences in the domain of intelligent computing theories with prospective applications to various engineering disciplines. The book is divided into two volumes: Evolution in Computational Intelligence (Volume 1) and Intelligent Data Engineering and Analytics (Volume 2). Covering a broad range of topics in computational intelligence, the book features papers on theoretical as well as practical aspects of areas such as ANN and genetic algorithms, computer interaction, intelligent control optimization, evolutionary computing, intelligent e-learning systems, machine learning, mobile computing, and multi-agent systems. As such, it is a valuable reference resource for postgraduate students in various engineering disciplines.
Book Synopsis THREE PROJECTS: Sentiment Analysis and Prediction Using Machine Learning and Deep Learning with Python GUI by : Vivian Siahaan
Download or read book THREE PROJECTS: Sentiment Analysis and Prediction Using Machine Learning and Deep Learning with Python GUI written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2022-03-21 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROJECT 1: TEXT PROCESSING AND SENTIMENT ANALYSIS USING MACHINE LEARNING AND DEEP LEARNING WITH PYTHON GUI Twitter data used in this project was scraped from February of 2015 and contributors were asked to first classify positive, negative, and neutral tweets, followed by categorizing negative reasons (such as "late flight" or "rude service"). This data was originally posted by Crowdflower last February and includes tweets about 6 major US airlines. Additionally, Crowdflower had their workers extract the sentiment from the tweet as well as what the passenger was dissapointed about if the tweet was negative. The information of main attributes for this project are as follows: airline_sentiment : Sentiment classification.(positivie, neutral, and negative); negativereason : Reason selected for the negative opinion; airline : Name of 6 US Airlines('Delta', 'United', 'Southwest', 'US Airways', 'Virgin America', 'American'); and text : Customer's opinion. The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier, and LSTM. Three vectorizers used in machine learning are Hashing Vectorizer, Count Vectorizer, and TFID Vectorizer. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 2: HOTEL REVIEW: SENTIMENT ANALYSIS USING MACHINE LEARNING AND DEEP LEARNING WITH PYTHON GUI The data used in this project is the data published by Anurag Sharma about hotel reviews that were given by costumers. The data is given in two files, a train and test. The train.csv is the training data, containing unique User_ID for each entry with the review entered by a costumer and the browser and device used. The target variable is Is_Response, a variable that states whether the costumers was happy or not happy while staying in the hotel. This type of variable makes the project to a classification problem. The test.csv is the testing data, contains similar headings as the train data, without the target variable. The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier, and LSTM. Three vectorizers used in machine learning are Hashing Vectorizer, Count Vectorizer, and TFID Vectorizer. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 3: STUDENT ACADEMIC PERFORMANCE ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON GUI The dataset used in this project consists of student achievement in secondary education of two Portuguese schools. The data attributes include student grades, demographic, social and school-related features) and it was collected by using school reports and questionnaires. Two datasets are provided regarding the performance in two distinct subjects: Mathematics (mat) and Portuguese language (por). In the two datasets were modeled under binary/five-level classification and regression tasks. Important note: the target attribute G3 has a strong correlation with attributes G2 and G1. This occurs because G3 is the final year grade (issued at the 3rd period), while G1 and G2 correspond to the 1st and 2nd period grades. It is more difficult to predict G3 without G2 and G1, but such prediction is much more useful. Attributes in the dataset are as follows: school - student's school (binary: 'GP' - Gabriel Pereira or 'MS' - Mousinho da Silveira); sex - student's sex (binary: 'F' - female or 'M' - male); age - student's age (numeric: from 15 to 22); address - student's home address type (binary: 'U' - urban or 'R' - rural); famsize - family size (binary: 'LE3' - less or equal to 3 or 'GT3' - greater than 3); Pstatus - parent's cohabitation status (binary: 'T' - living together or 'A' - apart); Medu - mother's education (numeric: 0 - none, 1 - primary education (4th grade), 2 - 5th to 9th grade, 3 - secondary education or 4 - higher education); Fedu - father's education (numeric: 0 - none, 1 - primary education (4th grade), 2 - 5th to 9th grade, 3 - secondary education or 4 - higher education); Mjob - mother's job (nominal: 'teacher', 'health' care related, civil 'services' (e.g. administrative or police), 'at_home' or 'other'); Fjob - father's job (nominal: 'teacher', 'health' care related, civil 'services' (e.g. administrative or police), 'at_home' or 'other'); reason - reason to choose this school (nominal: close to 'home', school 'reputation', 'course' preference or 'other'); guardian - student's guardian (nominal: 'mother', 'father' or 'other'); traveltime - home to school travel time (numeric: 1 - <15 min., 2 - 15 to 30 min., 3 - 30 min. to 1 hour, or 4 - >1 hour); studytime - weekly study time (numeric: 1 - <2 hours, 2 - 2 to 5 hours, 3 - 5 to 10 hours, or 4 - >10 hours); failures - number of past class failures (numeric: n if 1<=n<3, else 4); schoolsup - extra educational support (binary: yes or no); famsup - family educational support (binary: yes or no); paid - extra paid classes within the course subject (Math or Portuguese) (binary: yes or no); activities - extra-curricular activities (binary: yes or no); nursery - attended nursery school (binary: yes or no); higher - wants to take higher education (binary: yes or no); internet - Internet access at home (binary: yes or no); romantic - with a romantic relationship (binary: yes or no); famrel - quality of family relationships (numeric: from 1 - very bad to 5 - excellent); freetime - free time after school (numeric: from 1 - very low to 5 - very high); goout - going out with friends (numeric: from 1 - very low to 5 - very high); Dalc - workday alcohol consumption (numeric: from 1 - very low to 5 - very high); Walc - weekend alcohol consumption (numeric: from 1 - very low to 5 - very high); health - current health status (numeric: from 1 - very bad to 5 - very good); absences - number of school absences (numeric: from 0 to 93); G1 - first period grade (numeric: from 0 to 20); G2 - second period grade (numeric: from 0 to 20); and G3 - final grade (numeric: from 0 to 20, output target). The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier. Three feature scaling used in machine learning are raw, minmax scaler, and standard scaler. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, decision boundaries, performance of the model, scalability of the model, training loss, and training accuracy.
Book Synopsis Fundamentals of Machine Learning for Predictive Data Analytics, second edition by : John D. Kelleher
Download or read book Fundamentals of Machine Learning for Predictive Data Analytics, second edition written by John D. Kelleher and published by MIT Press. This book was released on 2020-10-20 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive introduction to machine learning approaches used in predictive data analytics, covering both theory and practice. Machine learning is often used to build predictive models by extracting patterns from large datasets. These models are used in predictive data analytics applications including price prediction, risk assessment, predicting customer behavior, and document classification. This introductory textbook offers a detailed and focused treatment of the most important machine learning approaches used in predictive data analytics, covering both theoretical concepts and practical applications. Technical and mathematical material is augmented with explanatory worked examples, and case studies illustrate the application of these models in the broader business context. This second edition covers recent developments in machine learning, especially in a new chapter on deep learning, and two new chapters that go beyond predictive analytics to cover unsupervised learning and reinforcement learning.
Book Synopsis ANALYSIS AND PREDICTION PROJECTS USING MACHINE LEARNING AND DEEP LEARNING WITH PYTHON by : Vivian Siahaan
Download or read book ANALYSIS AND PREDICTION PROJECTS USING MACHINE LEARNING AND DEEP LEARNING WITH PYTHON written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2022-02-17 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROJECT 1: DEFAULT LOAN PREDICTION BASED ON CUSTOMER BEHAVIOR Using Machine Learning and Deep Learning with Python In finance, default is failure to meet the legal obligations (or conditions) of a loan, for example when a home buyer fails to make a mortgage payment, or when a corporation or government fails to pay a bond which has reached maturity. A national or sovereign default is the failure or refusal of a government to repay its national debt. The dataset used in this project belongs to a Hackathon organized by "Univ.AI". All values were provided at the time of the loan application. Following are the features in the dataset: Income, Age, Experience, Married/Single, House_Ownership, Car_Ownership, Profession, CITY, STATE, CURRENT_JOB_YRS, CURRENT_HOUSE_YRS, and Risk_Flag. The Risk_Flag indicates whether there has been a default in the past or not. The machine learning models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, XGB classifier, MLP classifier, and CNN 1D. Finally, you will plot boundary decision, ROC, distribution of features, feature importance, cross validation score, and predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 2: AIRLINE PASSENGER SATISFACTION Analysis and Prediction Using Machine Learning and Deep Learning with Python The dataset used in this project contains an airline passenger satisfaction survey. In this case, you will determine what factors are highly correlated to a satisfied (or dissatisfied) passenger and predict passenger satisfaction. Below are the features in the dataset: Gender: Gender of the passengers (Female, Male); Customer Type: The customer type (Loyal customer, disloyal customer); Age: The actual age of the passengers; Type of Travel: Purpose of the flight of the passengers (Personal Travel, Business Travel); Class: Travel class in the plane of the passengers (Business, Eco, Eco Plus); Flight distance: The flight distance of this journey; Inflight wifi service: Satisfaction level of the inflight wifi service (0:Not Applicable;1-5); Departure/Arrival time convenient: Satisfaction level of Departure/Arrival time convenient; Ease of Online booking: Satisfaction level of online booking; Gate location: Satisfaction level of Gate location; Food and drink: Satisfaction level of Food and drink; Online boarding: Satisfaction level of online boarding; Seat comfort: Satisfaction level of Seat comfort; Inflight entertainment: Satisfaction level of inflight entertainment; On-board service: Satisfaction level of On-board service; Leg room service: Satisfaction level of Leg room service; Baggage handling: Satisfaction level of baggage handling; Check-in service: Satisfaction level of Check-in service; Inflight service: Satisfaction level of inflight service; Cleanliness: Satisfaction level of Cleanliness; Departure Delay in Minutes: Minutes delayed when departure; Arrival Delay in Minutes: Minutes delayed when Arrival; and Satisfaction: Airline satisfaction level (Satisfaction, neutral or dissatisfaction) The machine learning models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, LGBM classifier, Gradient Boosting, XGB classifier, MLP classifier, and CNN 1D. Finally, you will plot boundary decision, ROC, distribution of features, feature importance, cross validation score, and predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 3: CREDIT CARD CHURNING CUSTOMER ANALYSIS AND PREDICTION USING MACHINE LEARNING AND DEEP LEARNING WITH PYTHON The dataset used in this project consists of more than 10,000 customers mentioning their age, salary, marital_status, credit card limit, credit card category, etc. There are 20 features in the dataset. In the dataset, there are only 16.07% of customers who have churned. Thus, it's a bit difficult to train our model to predict churning customers. Following are the features in the dataset: 'Attrition_Flag', 'Customer_Age', 'Gender', 'Dependent_count', 'Education_Level', 'Marital_Status', 'Income_Category', 'Card_Category', 'Months_on_book', 'Total_Relationship_Count', 'Months_Inactive_12_mon', 'Contacts_Count_12_mon', 'Credit_Limit', 'Total_Revolving_Bal', 'Avg_Open_To_Buy', 'Total_Amt_Chng_Q4_Q1', 'Total_Trans_Amt', 'Total_Trans_Ct', 'Total_Ct_Chng_Q4_Q1', and 'Avg_Utilization_Ratio',. The target variable is 'Attrition_Flag'. The machine learning models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, LGBM classifier, Gradient Boosting, XGB classifier, MLP classifier, and CNN 1D. Finally, you will plot boundary decision, ROC, distribution of features, feature importance, cross validation score, and predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 4: MARKETING ANALYSIS AND PREDICTION USING MACHINE LEARNING AND DEEP LEARNING WITH PYTHON This data set was provided to students for their final project in order to test their statistical analysis skills as part of a MSc. in Business Analytics. It can be utilized for EDA, Statistical Analysis, and Visualizations. Following are the features in the dataset: ID = Customer's unique identifier; Year_Birth = Customer's birth year; Education = Customer's education level; Marital_Status = Customer's marital status; Income = Customer's yearly household income; Kidhome = Number of children in customer's household; Teenhome = Number of teenagers in customer's household; Dt_Customer = Date of customer's enrollment with the company; Recency = Number of days since customer's last purchase; MntWines = Amount spent on wine in the last 2 years; MntFruits = Amount spent on fruits in the last 2 years; MntMeatProducts = Amount spent on meat in the last 2 years; MntFishProducts = Amount spent on fish in the last 2 years; MntSweetProducts = Amount spent on sweets in the last 2 years; MntGoldProds = Amount spent on gold in the last 2 years; NumDealsPurchases = Number of purchases made with a discount; NumWebPurchases = Number of purchases made through the company's web site; NumCatalogPurchases = Number of purchases made using a catalogue; NumStorePurchases = Number of purchases made directly in stores; NumWebVisitsMonth = Number of visits to company's web site in the last month; AcceptedCmp3 = 1 if customer accepted the offer in the 3rd campaign, 0 otherwise; AcceptedCmp4 = 1 if customer accepted the offer in the 4th campaign, 0 otherwise; AcceptedCmp5 = 1 if customer accepted the offer in the 5th campaign, 0 otherwise; AcceptedCmp1 = 1 if customer accepted the offer in the 1st campaign, 0 otherwise; AcceptedCmp2 = 1 if customer accepted the offer in the 2nd campaign, 0 otherwise; Response = 1 if customer accepted the offer in the last campaign, 0 otherwise; Complain = 1 if customer complained in the last 2 years, 0 otherwise; and Country = Customer's location. The machine and deep learning models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, LGBM classifier, Gradient Boosting, XGB classifier, MLP classifier, and CNN 1D. Finally, you will plot boundary decision, ROC, distribution of features, feature importance, cross validation score, and predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 5: METEOROLOGICAL DATA ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON Meteorological phenomena are described and quantified by the variables of Earth's atmosphere: temperature, air pressure, water vapour, mass flow, and the variations and interactions of these variables, and how they change over time. Different spatial scales are used to describe and predict weather on local, regional, and global levels. The dataset used in this project consists of meteorological data with 96453 total number of data points and with 11 attributes/columns. Following are the columns in the dataset: Formatted Date; Summary; Precip Type; Temperature (C); Apparent Temperature (C); Humidity; Wind Speed (km/h); Wind Bearing (degrees); Visibility (km); Pressure (millibars); and Daily Summary. The machine learning models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, LGBM classifier, Gradient Boosting, XGB classifier, and MLP classifier. Finally, you will plot boundary decision, distribution of features, feature importance, cross validation score, and predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy.
Book Synopsis Python Artificial Intelligence Projects for Beginners by : Dr. Joshua Eckroth
Download or read book Python Artificial Intelligence Projects for Beginners written by Dr. Joshua Eckroth and published by Packt Publishing Ltd. This book was released on 2018-07-31 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build smart applications by implementing real-world artificial intelligence projects Key Features Explore a variety of AI projects with Python Get well-versed with different types of neural networks and popular deep learning algorithms Leverage popular Python deep learning libraries for your AI projects Book Description Artificial Intelligence (AI) is the newest technology that’s being employed among varied businesses, industries, and sectors. Python Artificial Intelligence Projects for Beginners demonstrates AI projects in Python, covering modern techniques that make up the world of Artificial Intelligence. This book begins with helping you to build your first prediction model using the popular Python library, scikit-learn. You will understand how to build a classifier using an effective machine learning technique, random forest, and decision trees. With exciting projects on predicting bird species, analyzing student performance data, song genre identification, and spam detection, you will learn the fundamentals and various algorithms and techniques that foster the development of these smart applications. In the concluding chapters, you will also understand deep learning and neural network mechanisms through these projects with the help of the Keras library. By the end of this book, you will be confident in building your own AI projects with Python and be ready to take on more advanced projects as you progress What you will learn Build a prediction model using decision trees and random forest Use neural networks, decision trees, and random forests for classification Detect YouTube comment spam with a bag-of-words and random forests Identify handwritten mathematical symbols with convolutional neural networks Revise the bird species identifier to use images Learn to detect positive and negative sentiment in user reviews Who this book is for Python Artificial Intelligence Projects for Beginners is for Python developers who want to take their first step into the world of Artificial Intelligence using easy-to-follow projects. Basic working knowledge of Python programming is expected so that you’re able to play around with code
Book Synopsis Practical Machine Learning for Data Analysis Using Python by : Abdulhamit Subasi
Download or read book Practical Machine Learning for Data Analysis Using Python written by Abdulhamit Subasi and published by Academic Press. This book was released on 2020-06-05 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Machine Learning for Data Analysis Using Python is a problem solver’s guide for creating real-world intelligent systems. It provides a comprehensive approach with concepts, practices, hands-on examples, and sample code. The book teaches readers the vital skills required to understand and solve different problems with machine learning. It teaches machine learning techniques necessary to become a successful practitioner, through the presentation of real-world case studies in Python machine learning ecosystems. The book also focuses on building a foundation of machine learning knowledge to solve different real-world case studies across various fields, including biomedical signal analysis, healthcare, security, economics, and finance. Moreover, it covers a wide range of machine learning models, including regression, classification, and forecasting. The goal of the book is to help a broad range of readers, including IT professionals, analysts, developers, data scientists, engineers, and graduate students, to solve their own real-world problems. Offers a comprehensive overview of the application of machine learning tools in data analysis across a wide range of subject areas Teaches readers how to apply machine learning techniques to biomedical signals, financial data, and healthcare data Explores important classification and regression algorithms as well as other machine learning techniques Explains how to use Python to handle data extraction, manipulation, and exploration techniques, as well as how to visualize data spread across multiple dimensions and extract useful features
Book Synopsis Predicting Student Performance and Its Impact on Mental Health Using Machine Learning by : Harsimran Singh
Download or read book Predicting Student Performance and Its Impact on Mental Health Using Machine Learning written by Harsimran Singh and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the main aim of educational institutes is to provide a high level of education to the students. Career selection is one of the most important and quite difficult decisions for learners. It is very important to examine student's capabilities and interests. As stresses of tests, peer and parental pressure on marks scored and job opportunities are some of the factors that lead to mental illness for university students. Determining the factors underlying mental illness from academic success to maintain the proper balance of life is becoming increasingly necessary. This kind of novel machine learning prediction system would help students studying in engineering institutes to address these key challenges So that they will focus on their targeted carrier. In this study, both classification and clustering techniques have been tested on the student academic and family datasets of various engineering students in Delhi, India. Although all the classifier models show comparably high classification performances, the Hybrid neural network is the best-concerning accuracy and precision. In addition, the analysis shows that mental health based on the performance of the students depends on various factors. The findings of this paper indicate the effectiveness and expressiveness of data mining models in performance evaluation. The result proves that the hybrid algorithm combining clustering and classification approaches yields results that are far superior in terms of achieving accuracy in the prediction of academic performance as well as mental wellnesses of the students.
Book Synopsis 5 FIVE DATA SCIENCE PROJECTS FOR ANALYSIS, CLASSIFICATION, PREDICTION, AND SENTIMENT ANALYSIS WITH PYTHON GUI by : Vivian Siahaan
Download or read book 5 FIVE DATA SCIENCE PROJECTS FOR ANALYSIS, CLASSIFICATION, PREDICTION, AND SENTIMENT ANALYSIS WITH PYTHON GUI written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2022-04-29 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROJECT 1: SUPERMARKET SALES ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON GUI The dataset used in this project consists of the growth of supermarkets with high market competitions in most populated cities. The dataset is one of the historical sales of supermarket company which has recorded in 3 different branches for 3 months data. Predictive data analytics methods are easy to apply with this dataset. Attribute information in the dataset are as follows: Invoice id: Computer generated sales slip invoice identification number; Branch: Branch of supercenter (3 branches are available identified by A, B and C); City: Location of supercenters; Customer type: Type of customers, recorded by Members for customers using member card and Normal for without member card; Gender: Gender type of customer; Product line: General item categorization groups - Electronic accessories, Fashion accessories, Food and beverages, Health and beauty, Home and lifestyle, Sports and travel; Unit price: Price of each product in $; Quantity: Number of products purchased by customer; Tax: 5% tax fee for customer buying; Total: Total price including tax; Date: Date of purchase (Record available from January 2019 to March 2019); Time: Purchase time (10am to 9pm); Payment: Payment used by customer for purchase (3 methods are available – Cash, Credit card and Ewallet); COGS: Cost of goods sold; Gross margin percentage: Gross margin percentage; Gross income: Gross income; and Rating: Customer stratification rating on their overall shopping experience (On a scale of 1 to 10). In this project, you will perform predicting rating using machine learning. The machine learning models used in this project to predict clusters as target variable are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, LGBM, Gradient Boosting, XGB, and MLP. Finally, you will plot boundary decision, distribution of features, feature importance, cross validation score, and predicted values versus true values, confusion matrix, learning curve, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 2: DETECTING CYBERBULLYING TWEETS USING MACHINE LEARNING AND DEEP LEARNING WITH PYTHON GUI As social media usage becomes increasingly prevalent in every age group, a vast majority of citizens rely on this essential medium for day-to-day communication. Social media’s ubiquity means that cyberbullying can effectively impact anyone at any time or anywhere, and the relative anonymity of the internet makes such personal attacks more difficult to stop than traditional bullying. On April 15th, 2020, UNICEF issued a warning in response to the increased risk of cyberbullying during the COVID-19 pandemic due to widespread school closures, increased screen time, and decreased face-to-face social interaction. The statistics of cyberbullying are outright alarming: 36.5% of middle and high school students have felt cyberbullied and 87% have observed cyberbullying, with effects ranging from decreased academic performance to depression to suicidal thoughts. In light of all of this, this dataset contains more than 47000 tweets labelled according to the class of cyberbullying: Age; Ethnicity; Gender; Religion; Other type of cyberbullying; and Not cyberbullying. The data has been balanced in order to contain ~8000 of each class. The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, XGB classifier, LSTM, and CNN. Three feature scaling used in machine learning are raw, minmax scaler, and standard scaler. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, decision boundaries, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 3: HIGHER EDUCATION STUDENT ACADEMIC PERFORMANCE ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON GUI The dataset used in this project was collected from the Faculty of Engineering and Faculty of Educational Sciences students in 2019. The purpose is to predict students' end-of-term performances using ML techniques. Attribute information in the dataset are as follows: Student ID; Student Age (1: 18-21, 2: 22-25, 3: above 26); Sex (1: female, 2: male); Graduated high-school type: (1: private, 2: state, 3: other); Scholarship type: (1: None, 2: 25%, 3: 50%, 4: 75%, 5: Full); Additional work: (1: Yes, 2: No); Regular artistic or sports activity: (1: Yes, 2: No); Do you have a partner: (1: Yes, 2: No); Total salary if available (1: USD 135-200, 2: USD 201-270, 3: USD 271-340, 4: USD 341-410, 5: above 410); Transportation to the university: (1: Bus, 2: Private car/taxi, 3: bicycle, 4: Other); Accommodation type in Cyprus: (1: rental, 2: dormitory, 3: with family, 4: Other); Mother's education: (1: primary school, 2: secondary school, 3: high school, 4: university, 5: MSc., 6: Ph.D.); Father's education: (1: primary school, 2: secondary school, 3: high school, 4: university, 5: MSc., 6: Ph.D.); Number of sisters/brothers (if available): (1: 1, 2:, 2, 3: 3, 4: 4, 5: 5 or above); Parental status: (1: married, 2: divorced, 3: died - one of them or both); Mother's occupation: (1: retired, 2: housewife, 3: government officer, 4: private sector employee, 5: self-employment, 6: other); Father's occupation: (1: retired, 2: government officer, 3: private sector employee, 4: self-employment, 5: other); Weekly study hours: (1: None, 2: <5 hours, 3: 6-10 hours, 4: 11-20 hours, 5: more than 20 hours); Reading frequency (non-scientific books/journals): (1: None, 2: Sometimes, 3: Often); Reading frequency (scientific books/journals): (1: None, 2: Sometimes, 3: Often); Attendance to the seminars/conferences related to the department: (1: Yes, 2: No); Impact of your projects/activities on your success: (1: positive, 2: negative, 3: neutral); Attendance to classes (1: always, 2: sometimes, 3: never); Preparation to midterm exams 1: (1: alone, 2: with friends, 3: not applicable); Preparation to midterm exams 2: (1: closest date to the exam, 2: regularly during the semester, 3: never); Taking notes in classes: (1: never, 2: sometimes, 3: always); Listening in classes: (1: never, 2: sometimes, 3: always); Discussion improves my interest and success in the course: (1: never, 2: sometimes, 3: always); Flip-classroom: (1: not useful, 2: useful, 3: not applicable); Cumulative grade point average in the last semester (/4.00): (1: <2.00, 2: 2.00-2.49, 3: 2.50-2.99, 4: 3.00-3.49, 5: above 3.49); Expected Cumulative grade point average in the graduation (/4.00): (1: <2.00, 2: 2.00-2.49, 3: 2.50-2.99, 4: 3.00-3.49, 5: above 3.49); Course ID; and OUTPUT: Grade (0: Fail, 1: DD, 2: DC, 3: CC, 4: CB, 5: BB, 6: BA, 7: AA). The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier. Three feature scaling used in machine learning are raw, minmax scaler, and standard scaler. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, decision boundaries, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 4: COMPANY BANKRUPTCY ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON GUI The dataset was collected from the Taiwan Economic Journal for the years 1999 to 2009. Company bankruptcy was defined based on the business regulations of the Taiwan Stock Exchange. Attribute information in the dataset are as follows: Y - Bankrupt?: Class label; X1 - ROA(C) before interest and depreciation before interest: Return On Total Assets(C); X2 - ROA(A) before interest and % after tax: Return On Total Assets(A); X3 - ROA(B) before interest and depreciation after tax: Return On Total Assets(B); X4 - Operating Gross Margin: Gross Profit/Net Sales; X5 - Realized Sales Gross Margin: Realized Gross Profit/Net Sales; X6 - Operating Profit Rate: Operating Income/Net Sales; X7 - Pre-tax net Interest Rate: Pre-Tax Income/Net Sales; X8 - After-tax net Interest Rate: Net Income/Net Sales; X9 - Non-industry income and expenditure/revenue: Net Non-operating Income Ratio; X10 - Continuous interest rate (after tax): Net Income-Exclude Disposal Gain or Loss/Net Sales; X11 - Operating Expense Rate: Operating Expenses/Net Sales; X12 - Research and development expense rate: (Research and Development Expenses)/Net Sales X13 - Cash flow rate: Cash Flow from Operating/Current Liabilities; X14 - Interest-bearing debt interest rate: Interest-bearing Debt/Equity; X15 - Tax rate (A): Effective Tax Rate; X16 - Net Value Per Share (B): Book Value Per Share(B); X17 - Net Value Per Share (A): Book Value Per Share(A); X18 - Net Value Per Share (C): Book Value Per Share(C); X19 - Persistent EPS in the Last Four Seasons: EPS-Net Income; X20 - Cash Flow Per Share; X21 - Revenue Per Share (Yuan ¥): Sales Per Share; X22 - Operating Profit Per Share (Yuan ¥): Operating Income Per Share; X23 - Per Share Net profit before tax (Yuan ¥): Pretax Income Per Share; X24 - Realized Sales Gross Profit Growth Rate; X25 - Operating Profit Growth Rate: Operating Income Growth; X26 - After-tax Net Profit Growth Rate: Net Income Growth; X27 - Regular Net Profit Growth Rate: Continuing Operating Income after Tax Growth; X28 - Continuous Net Profit Growth Rate: Net Income-Excluding Disposal Gain or Loss Growth; X29 - Total Asset Growth Rate: Total Asset Growth; X30 - Net Value Growth Rate: Total Equity Growth; X31 - Total Asset Return Growth Rate Ratio: Return on Total Asset Growth; X32 - Cash Reinvestment %: Cash Reinvestment Ratio X33 - Current Ratio; X34 - Quick Ratio: Acid Test; X35 - Interest Expense Ratio: Interest Expenses/Total Revenue; X36 - Total debt/Total net worth: Total Liability/Equity Ratio; X37 - Debt ratio %: Liability/Total Assets; X38 - Net worth/Assets: Equity/Total Assets; X39 - Long-term fund suitability ratio (A): (Long-term Liability+Equity)/Fixed Assets; X40 - Borrowing dependency: Cost of Interest-bearing Debt; X41 - Contingent liabilities/Net worth: Contingent Liability/Equity; X42 - Operating profit/Paid-in capital: Operating Income/Capital; X43 - Net profit before tax/Paid-in capital: Pretax Income/Capital; X44 - Inventory and accounts receivable/Net value: (Inventory+Accounts Receivables)/Equity; X45 - Total Asset Turnover; X46 - Accounts Receivable Turnover; X47 - Average Collection Days: Days Receivable Outstanding; X48 - Inventory Turnover Rate (times); X49 - Fixed Assets Turnover Frequency; X50 - Net Worth Turnover Rate (times): Equity Turnover; X51 - Revenue per person: Sales Per Employee; X52 - Operating profit per person: Operation Income Per Employee; X53 - Allocation rate per person: Fixed Assets Per Employee; X54 - Working Capital to Total Assets; X55 - Quick Assets/Total Assets; X56 - Current Assets/Total Assets; X57 - Cash/Total Assets; X58 - Quick Assets/Current Liability; X59 - Cash/Current Liability; X60 - Current Liability to Assets; X61 - Operating Funds to Liability; X62 - Inventory/Working Capital; X63 - Inventory/Current Liability X64 - Current Liabilities/Liability; X65 - Working Capital/Equity; X66 - Current Liabilities/Equity; X67 - Long-term Liability to Current Assets; X68 - Retained Earnings to Total Assets; X69 - Total income/Total expense; X70 - Total expense/Assets; X71 - Current Asset Turnover Rate: Current Assets to Sales; X72 - Quick Asset Turnover Rate: Quick Assets to Sales; X73 - Working capitcal Turnover Rate: Working Capital to Sales; X74 - Cash Turnover Rate: Cash to Sales; X75 - Cash Flow to Sales; X76 - Fixed Assets to Assets; X77 - Current Liability to Liability; X78 - Current Liability to Equity; X79 - Equity to Long-term Liability; X80 - Cash Flow to Total Assets; X81 - Cash Flow to Liability; X82 - CFO to Assets; X83 - Cash Flow to Equity; X84 - Current Liability to Current Assets; X85 - Liability-Assets Flag: 1 if Total Liability exceeds Total Assets, 0 otherwise; X86 - Net Income to Total Assets; X87 - Total assets to GNP price; X88 - No-credit Interval; X89 - Gross Profit to Sales; X90 - Net Income to Stockholder's Equity; X91 - Liability to Equity; X92 - Degree of Financial Leverage (DFL); X93 - Interest Coverage Ratio (Interest expense to EBIT); X94 - Net Income Flag: 1 if Net Income is Negative for the last two years, 0 otherwise; and X95 - Equity to Liabilitys. The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier. Three feature scaling used in machine learning are raw, minmax scaler, and standard scaler. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, decision boundaries, performance of the model, scalability of the model, training loss, and training accuracy. PROJECT 5: DATA SCIENCE FOR RAIN CLASSIFICATION AND PREDICTION WITH PYTHON GUI This dataset contains about 10 years of daily weather observations from many locations across Australia. RainTomorrow is the target variable to predict. You will determine rain or not in the next day. This column is Yes if the rain for that day was 1mm or more. Observations were drawn from numerous weather stations. The daily observations are available from http://www.bom.gov.au/climate/data. The dataset contains 23 attributes. Some of them are as follows: About some of them are: DATE - The date of observation; LOCATION - The common name of the location of the weather station; MINTEMP - The minimum temperature in degrees celsius; MAXTEMP - The maximum temperature in degrees celsius; RAINFALL - The amount of rainfall recorded for the day in mm; EVAPORATION - The so-called Class A pan evaporation (mm) in the 24 hours to 9am; SUNSHINE - The number of hours of bright sunshine in the day; WINDGUESTDIR - The direction of the strongest wind gust in the 24 hours to midnight; WINDGUESTSPEED- The speed (km/h) of the strongest wind gust in the 24 hours to midnight; and WINDDIR9AM - Direction of the wind at 9am. The models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, Support Vector Machine, Adaboost, LGBM classifier, Gradient Boosting, and XGB classifier. Three feature scaling used in machine learning are raw, minmax scaler, and standard scaler. Finally, you will develop a GUI using PyQt5 to plot cross validation score, predicted values versus true values, confusion matrix, learning curve, decision boundaries, performance of the model, scalability of the model, training loss, and training accuracy.
Book Synopsis AN ANALYTICAL APPLICATION TO TRACK, ANALYZE AND PREDICT SCHOLAR'S ACADEMIC PERFORMANCE by : Vigneshwaran G
Download or read book AN ANALYTICAL APPLICATION TO TRACK, ANALYZE AND PREDICT SCHOLAR'S ACADEMIC PERFORMANCE written by Vigneshwaran G and published by . This book was released on 2021-05-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is developed for the reseach scholars and students regarding a prediticting project The objective of this machine learning project is to classify and predict the future academic grades and leadership scores of the students through building a convolution neural network to predict the scores. The application works as a platform for exposing the semester marks of the students through machine learning technique. The main goal is to predict the academic performance using machine learning to develop a model to predict the student's semester grade result. The ability to predict student performance in education is very significant in educational environments. The stored database contains student's information to improve student's perspective and behaviour. Using that information, we can analyse the performance, which will help for both students and mentors. The system learns the Attendance of the student, Difficulty of the future subjects and previous performance of a student to predict the future semester grades with the help of attendance and activities. An institution needs to know the case history of their registered students of their institute to predict their performance. This will help mentors consolidate the student on improving and developing each student's curriculum record. It refers to performing various data produced by students in order to evaluate learning process like, predict the future performance and identify probable problems.
Book Synopsis International Conference on Innovative Computing and Communications by : Deepak Gupta
Download or read book International Conference on Innovative Computing and Communications written by Deepak Gupta and published by Springer Nature. This book was released on 2020-08-01 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at the Third International Conference on Innovative Computing and Communication (ICICC 2020), which is held at the Shaheed Sukhdev College of Business Studies, University of Delhi, Delhi, India, on 21–23 February, 2020. Introducing the innovative works of scientists, professors, research scholars, students and industrial experts in the field of computing and communication, the book promotes the transformation of fundamental research into institutional and industrialized research and the conversion of applied exploration into real-time applications.
Book Synopsis Data Science in Education Using R by : Ryan A. Estrellado
Download or read book Data Science in Education Using R written by Ryan A. Estrellado and published by Routledge. This book was released on 2020-10-26 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Science in Education Using R is the go-to reference for learning data science in the education field. The book answers questions like: What does a data scientist in education do? How do I get started learning R, the popular open-source statistical programming language? And what does a data analysis project in education look like? If you’re just getting started with R in an education job, this is the book you’ll want with you. This book gets you started with R by teaching the building blocks of programming that you’ll use many times in your career. The book takes a "learn by doing" approach and offers eight analysis walkthroughs that show you a data analysis from start to finish, complete with code for you to practice with. The book finishes with how to get involved in the data science community and how to integrate data science in your education job. This book will be an essential resource for education professionals and researchers looking to increase their data analysis skills as part of their professional and academic development.
Book Synopsis STROKE: Analysis and Prediction Using Scikit-Learn, Keras, and TensorFlow with Python GUI by : Vivian Siahaan
Download or read book STROKE: Analysis and Prediction Using Scikit-Learn, Keras, and TensorFlow with Python GUI written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2023-07-15 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this project, we will perform an analysis and prediction task on stroke data using machine learning and deep learning techniques. The entire process will be implemented with Python GUI for a user-friendly experience. We start by exploring the stroke dataset, which contains information about various factors related to individuals and their likelihood of experiencing a stroke. We load the dataset and examine its structure, features, and statistical summary. Next, we preprocess the data to ensure its suitability for training machine learning models. This involves handling missing values, encoding categorical variables, and scaling numerical features. We utilize techniques such as data imputation and label encoding. To gain insights from the data, we visualize its distribution and relationships between variables. We create plots such as histograms, scatter plots, and correlation matrices to understand the patterns and correlations in the data. To improve model performance and reduce dimensionality, we select the most relevant features for prediction. We employ techniques such as correlation analysis, feature importance ranking, and domain knowledge to identify the key predictors of stroke. Before training our models, we split the dataset into training and testing subsets. The training set will be used to train the models, while the testing set will evaluate their performance on unseen data. We construct several machine learning models to predict stroke. These models include Support Vector, Logistic Regression, K-Nearest Neighbors (KNN), Decision Tree, Random Forest, Gradient Boosting, Light Gradient Boosting, Naive Bayes, Adaboost, and XGBoost. Each model is built and trained using the training dataset. We train each model on the training dataset and evaluate its performance using appropriate metrics such as accuracy, precision, recall, and F1-score. This helps us assess how well the models can predict stroke based on the given features. To optimize the models' performance, we perform hyperparameter tuning using techniques like grid search or randomized search. This involves systematically exploring different combinations of hyperparameters to find the best configuration for each model. After training and tuning the models, we save them to disk using joblib. This allows us to reuse the trained models for future predictions without having to train them again. With the models trained and saved, we move on to implementing the Python GUI. We utilize PyQt libraries to create an interactive graphical user interface that provides a seamless user experience. The GUI consists of various components such as buttons, checkboxes, input fields, and plots. These components allow users to interact with the application, select prediction models, and visualize the results. In addition to the machine learning models, we also implement an ANN using TensorFlow. The ANN is trained on the preprocessed dataset, and its architecture consists of a dense layer with a sigmoid activation function. We train the ANN on the training dataset, monitoring its performance using metrics like loss and accuracy. We visualize the training progress by plotting the loss and accuracy curves over epochs. Once the ANN is trained, we save the model to disk using the h5 format. This allows us to load the trained ANN for future predictions. In the GUI, users have the option to choose the ANN as the prediction model. When selected, the ANN model is loaded from disk, and predictions are made on the testing dataset. The predicted labels are compared with the true labels for evaluation. To assess the accuracy of the ANN predictions, we calculate various evaluation metrics such as accuracy score, precision, recall, and classification report. These metrics provide insights into the ANN's performance in predicting stroke. We create plots to visualize the results of the ANN predictions. These plots include a comparison of the true values and predicted values, as well as a confusion matrix to analyze the classification accuracy. The training history of the ANN, including the loss and accuracy curves over epochs, is plotted and displayed in the GUI. This allows users to understand how the model's performance improved during training. In summary, this project covers the analysis and prediction of stroke using machine learning and deep learning models. It encompasses data exploration, preprocessing, model training, hyperparameter tuning, GUI implementation, ANN training, and prediction visualization. The Python GUI enhances the user experience by providing an interactive and intuitive platform for exploring and predicting stroke based on various features.
Book Synopsis Computational Science and Its Applications – ICCSA 2021 by : Osvaldo Gervasi
Download or read book Computational Science and Its Applications – ICCSA 2021 written by Osvaldo Gervasi and published by Springer Nature. This book was released on 2021-09-09 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ten-volume set LNCS 12949 – 12958 constitutes the proceedings of the 21st International Conference on Computational Science and Its Applications, ICCSA 2021, which was held in Cagliari, Italy, during September 13 – 16, 2021. The event was organized in a hybrid mode due to the Covid-19 pandemic.The 466 full and 18 short papers presented in these proceedings were carefully reviewed and selected from 1588 submissions. The books cover such topics as multicore architectures, blockchain, mobile and wireless security, sensor networks, open source software, collaborative and social computing systems and tools, cryptography, applied mathematics human computer interaction, software design engineering, and others. Part IX of the set includes the proceedings of the following events: 13th International Symposium on Software Engineering Processes and Applications (SEPA 2021); International Workshop on Sustainability Performance Assessment: models, approaches and applications toward interdisciplinary and integrated solutions (SPA 2021).
Book Synopsis METEOROLOGICAL DATA ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON by : Vivian Siahaan
Download or read book METEOROLOGICAL DATA ANALYSIS AND PREDICTION USING MACHINE LEARNING WITH PYTHON written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2023-07-31 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this meteorological data analysis and prediction project using machine learning with Python, we begin by conducting data exploration to understand the dataset's structure and contents. We load the dataset and check for any missing values or anomalies that may require preprocessing. To gain insights into the data, we visualize the distribution of each feature, examining histograms, box plots, and scatter plots. This helps us identify potential outliers and understand the relationships between different variables. After data exploration, we preprocess the dataset, handling missing values through imputation techniques or removing rows with missing data, ensuring the data is ready for machine learning algorithms. Next, we define the problem we want to solve, which is predicting the weather summary based on various meteorological parameters. The weather summary serves as our target variable, while the other features act as input variables. We split the data into training and testing sets to train the machine learning models on one subset and evaluate their performance on unseen data. For the prediction task, we start with simple machine learning models like Logistic Regression or Decision Trees. We fit these models to the training data and assess their accuracy on the test set. To improve model performance, we explore more complex algorithms, such as Logistic Regression, K-Nearest Neighbors, Support Vector, Decision Trees, Random Forests, Gradient Boosting, Extreme Gradient Boosting, Light Gradient Boosting, and Multi-Layer Perceptron (MLP). We use grid search to tune the hyperparameters of these models and find the best combination that optimizes their performance. During model evaluation, we use metrics such as accuracy, precision, recall, and F1-score to measure how well the models predict the weather summary. To ensure robustness and reliability of the results, we apply k-fold cross-validation, where the dataset is divided into k subsets, and each model is trained and evaluated k times. Throughout the project, we pay attention to potential issues like overfitting or underfitting, striving to strike a balance between model complexity and generalization. Visualizations play a crucial role in understanding the model's behavior and identifying areas for improvement. We create various plots, including learning curves and confusion matrices, to interpret the model's performance. In the prediction phase, we apply the trained models to the test dataset to predict the weather summary for each sample. We compare the predicted values with the actual values to assess the model's performance on unseen data. The entire project is well-documented, ensuring transparency and reproducibility. We record the methodologies, findings, and results to facilitate future reference or sharing with stakeholders. We analyze the predictive capabilities of the models and summarize their strengths and limitations. We discuss potential areas of improvement and future directions to enhance the model's accuracy and robustness. The main objective of this project is to accurately predict weather summaries based on meteorological data, while also gaining valuable insights into the underlying patterns and trends in the data. By leveraging machine learning algorithms, preprocessing techniques, hyperparameter tuning, and thorough evaluation, we aim to build reliable models that can assist in weather forecasting and analysis.
Book Synopsis Practical Data Science Programming for Medical Datasets Analysis and Prediction with Python GUI by : Vivian Siahaan
Download or read book Practical Data Science Programming for Medical Datasets Analysis and Prediction with Python GUI written by Vivian Siahaan and published by BALIGE PUBLISHING. This book was released on 2023-06-23 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, you will implement two data science projects using Scikit-Learn, Scipy, and other libraries with Python GUI. In chapter 1, you will learn how to use Scikit-Learn, SVM, NumPy, Pandas, and other libraries to perform how to predict early stage diabetes using Early Stage Diabetes Risk Prediction Dataset (https://viviansiahaan.blogspot.com/2023/06/practical-data-science-programming-for.html). This dataset contains the sign and symptom data of newly diabetic or would be diabetic patient. This has been collected using direct questionnaires from the patients of Sylhet Diabetes Hospital in Sylhet, Bangladesh and approved by a doctor. The dataset consist of total 15 features and one target variable named class. Age: Age in years ranging from (20years to 65 years); Gender: Male / Female; Polyuria: Yes / No; Polydipsia: Yes/ No; Sudden weight loss: Yes/ No; Weakness: Yes/ No; Polyphagia: Yes/ No; Genital Thrush: Yes/ No; Visual blurring: Yes/ No; Itching: Yes/ No; Irritability: Yes/No; Delayed healing: Yes/ No; Partial Paresis: Yes/ No; Muscle stiffness: yes/ No; Alopecia: Yes/ No; Obesity: Yes/ No; This dataset contains the sign and symptpom data of newly diabetic or would be diabetic patient. This has been collected using direct questionnaires from the patients of Sylhet Diabetes Hospital in Sylhet, Bangladesh and approved by a doctor. You will develop a GUI using PyQt5 to plot distribution of features, feature importance, cross validation score, and prediced values versus true values. The machine learning models used in this project are Adaboost, Random Forest, Gradient Boosting, Logistic Regression, and Support Vector Machine. In chapter 2, you will learn how to use Scikit-Learn, NumPy, Pandas, and other libraries to perform how to analyze and predict breast cancer using Breast Cancer Prediction Dataset (https://viviansiahaan.blogspot.com/2023/06/practical-data-science-programming-for.html). Worldwide, breast cancer is the most common type of cancer in women and the second highest in terms of mortality rates.Diagnosis of breast cancer is performed when an abnormal lump is found (from self-examination or x-ray) or a tiny speck of calcium is seen (on an x-ray). After a suspicious lump is found, the doctor will conduct a diagnosis to determine whether it is cancerous and, if so, whether it has spread to other parts of the body. This breast cancer dataset was obtained from the University of Wisconsin Hospitals, Madison from Dr. William H. Wolberg. You will develop a GUI using PyQt5 to plot distribution of features, pairwise relationship, test scores, prediced values versus true values, confusion matrix, and decision boundary. The machine learning models used in this project are K-Nearest Neighbor, Random Forest, Naive Bayes, Logistic Regression, Decision Tree, and Support Vector Machine.
