Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Structural Design And Analysis For A Double Band Cold Mass Support Of The Mice Coupling Magnet
Download Structural Design And Analysis For A Double Band Cold Mass Support Of The Mice Coupling Magnet full books in PDF, epub, and Kindle. Read online Structural Design And Analysis For A Double Band Cold Mass Support Of The Mice Coupling Magnet ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Structural Design and Analysis for a Double-Band Cold Mass Support of the MICE Coupling Magnet by :
Download or read book Structural Design and Analysis for a Double-Band Cold Mass Support of the MICE Coupling Magnet written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The cooling channel of Muon Ionization Cooling Experiment (MICE) consists of eighteen superconducting solenoid coils, which are magnetically hooked together. A pair ofcoupling magnets operating at 4 K is applied to produce up to .6 T magnetic field on the magnet centerline to keep muon beam within the RF cavity windows. The peak magnetic force on the coupling magnet from other magnets in the MICE channel is up to 500 kN inlongitudinal direction, and the requirements for magnet center and axis azimuthal angle at 4 K are stringent. A self-centered double-band cold mass support system with intermediatethermal interruption is applied for the coupling magnet. The physical center of the magnet does not change as it is cooled down from 300 K to 4.2 K with this support system. In this paper the design parameters of the support system are discussed. The integral analysis of the support system using FEA method was carried out to etermine the tension forces in bands when various loads are applied. The magnet centre displacement and concentricity deviation form the axis of the warm bore are obtained, and the peak tension in support bands is also determined according to the simulation results.
Book Synopsis Design and Analyisi of a Self-centered Cold Mass Support for the MICE Coupling Magnet by :
Download or read book Design and Analyisi of a Self-centered Cold Mass Support for the MICE Coupling Magnet written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Muon Ionization Cooling Experiment (MICE) consists of eighteen superconducting solenoid coils in seven modules, which are magnetically hooked together since there is no iron to shield the coils and the return flux. The RF coupling coil (RFCC) module consists of a superconducting coupling solenoid mounted around four conventional conducting 201.25 MHz closed RF cavities. The coupling coil will produce up to a 2.2 T magnetic field on the centerline to keep the beam within the RF cavities. The peak magnetic force on the coupling magnet from other magnets in MICE is up to 500 kN in longitudinal direction, which will be transferred to the base of the RF coupling coil (RFCC) module through a cold mass support system. A self-centered double-band cold mass support system with intermediate thermal interruption is applied to the coupling magnet, and the design is introduced in detail in this paper. The thermal and structural analysis on the cold mass support assembly has been carried out using ANSYS. The present design of the cold mass support can satisfy with the stringent requirements for the magnet center and axis azimuthal angle at 4.2 K and fully charged.
Book Synopsis Structural Design and Thermal Analysis for Thermal Shields of the MICE Coupling Magnets by :
Download or read book Structural Design and Thermal Analysis for Thermal Shields of the MICE Coupling Magnets written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A superconducting coupling magnet made from copper matrix NbTi conductors operating at 4 K will be used in the Muon Ionization Cooling Experiment (MICE) to produce up to 2.6 T on the magnet centerline to keep the muon beam within the thin RF cavity indows. The coupling magnet is to be cooled by two cryocoolers with a total cooling capacity of 3 W at 4.2 K. In order to keep a certain operating temperature margin, the most important is to reduce the heat leakage imposed on cold surfaces of coil cold mass assembly. An ntermediate temperature shield system placed between the coupling coil and warm vacuum chamber is adopted. The shield system consists of upper neck shield, main shields, flexible connections and eight supports, which is to be cooled by the first stage cold heads of two ryocoolers with cooling capacity of 55 W at 60 K each. The maximum temperature difference on the shields should be less than 20 K, so the thermal analyses for the shields with different thicknesses, materials, flexible connections for shields' cooling and structure design for heir supports were carried out. 1100 Al is finally adopted and the maximum temperature difference is around 15 K with 4 mm shield thickness. The paper is to present detailed analyses on the shield system design.
Book Synopsis A Single-band Cold Mass Support System for the MICE Superconducting Coupling Magnet by :
Download or read book A Single-band Cold Mass Support System for the MICE Superconducting Coupling Magnet written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The cooling channel of the Muon Ionization Cooling Experiment (MICE) consists of eighteen superconducting solenoid coils, which are magnetically hooked together and contained in seven modules. The operations of a pair of MICE superconducting coupling magnets are affected directly by the other solenoid coils in the MICE channel. In order to meet the stringent requirement for the magnet center and axis azimuthal angle at 4.2 K, a self-centered tension-band cold mass support system with intermediate thermal interruption was applied for the MICE superconducting coupling magnet. The physical center of the magnet does not change as it is cooled down from 300 K to 4.2 K using this support system. This paper analyzed and calculated force loads on the coupling magnet under various operation modes of the MICE cooling channel. The performance parameters of a single-band cold mass support system were calculated also.
Book Synopsis Cold Mass Issues in the MICE Coupling Magnet by :
Download or read book Cold Mass Issues in the MICE Coupling Magnet written by and published by . This book was released on 2011 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: I have identified two potential issues in the design of the attachments to the MICE coupling magnet cold mass. One of these attachment issues may extend into the cold mass. Both issues came to light during the analysis of what happened to the spectrometer solenoids. We must not make the same mistakes that were made on the spectrometer solenoids. The two questions that result from the identified issues are; 1) Are the superconducting low temperature superconducting leads between the coupling coil and the lower end of the high temperature superconducting (LTS) leads robust enough not quench and burn out? In the spectrometer solenoid one part of the LTS lead was not robust enough to prevent quenching and a burn out of the LTS lead and ; 2) Will there be problems with the quench protection resistors and diodes when the magnet quenches as a result of an HTS lead burning out or a disconnect of the magnet from its power supply? The second question is very important because the coupling coil has a large stored energy and inductance. As result, when current flows through the diodes and the resistors, both can be over heated. We observed resistor overheating in spectrometer magnet 2. This heating probably happened when the HTS lead the LTS lead burned out during the tests of magnet 2A and 2B respectively. (See MICE Note 324.) The answer to the first question is simple and straightforward. This is the issue that is primarily dealt with in MICE Note 324. If the resistance across the coil sub-divisions is high enough, the whole magnet will turn normal through quench-back. Making the resistance across a coil sub-division high enough is not simple.
Book Synopsis Magnetic and Cryogenic Design of the MICE Coupling Solenoid Magnet System by :
Download or read book Magnetic and Cryogenic Design of the MICE Coupling Solenoid Magnet System written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Muon Ionization Cooling Experiment (MICE) will demonstrate ionization cooling in a short section of a realistic cooling channel using a muon beam at Rutherford Appleton Laboratory in the UK. The coupling magnet is a superconducting solenoid mounted around four 201MHz RF cavities, which produces magnetic field up to 2.6 T on the magnet centerline to keep muons within the iris of RF cavities windows. The coupling coil with inner radius of 750mm, length of 285mm and thickness of 102.5mm will be cooled by a pair of 1.5 W at 4.2 K small coolers. This paper will introduce the updated engineering design of the coupling magnet made by ICST in China. The detailed analyses on magnetic fields, stresses induced during the processes of winding, cool down and charging, and cold mass support assembly are presented as well.
Book Synopsis The Mechanical and Thermal Design for the MICE Coupling SolenoidMagnet by :
Download or read book The Mechanical and Thermal Design for the MICE Coupling SolenoidMagnet written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The MICE coupling solenoids surround the RF cavities that are used to increase the longitudinal momentum of the muon beam that is being cooled within MICE. The coupling solenoids will have a warm-bore diameter of 1394 mm. This is the warm bore that is around the 200 MHz RF cavities. The coupling solenoid is a single superconducting coil fabricated from a copper matrix Nb-Ti conductor originally designed for MRI magnets. A single coupling magnet is designed so that it can be cooled with a single 1.5 W (at 4.2 K) cooler. The MICE cooling channel has two of these solenoids, which will be hooked together in series, for a magnet circuit with a total stored-energy of the order of 12.8 MJ. Quench protection for the coupling coils is discussed. This report also presents the mechanical and thermal design parameters for this magnet, including the results of finite element calculations of mechanical forces and heat flow in the magnet cold mass.
Book Synopsis Deflection Analysis for an SSC (Superconducting Super Collider) Dipole Magnet with Two External Supports by :
Download or read book Deflection Analysis for an SSC (Superconducting Super Collider) Dipole Magnet with Two External Supports written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: SSC dipole magnets are presently supported at five mounting locations coincident with the internal cold mass supports. There is growing interest in reducing the number of external supports from five to two for reasons of simplified installation and alignment and as a cost reduction measure. This reports examines the placement of two external supports required to minimize the deflection of the cold mass assembly.
Book Synopsis AC Loss Analysis on the Superconducting Coupling Magnet in MICE. by :
Download or read book AC Loss Analysis on the Superconducting Coupling Magnet in MICE. written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A pair of coupling solenoids is used in MICE experiment to generate magnetic field which keeps the muons within the iris of thin RF cavity windows. The coupling solenoids have a 1.5-meter inner diameter and will produce 7.4 T peak magnetic field. Three types of AC losses in coupling solenoid are discussed. The affect of AC losses on the temperature distribution within the cold mass during charging and rapid discharging process is analyzed also. The analysis result will be further confirmed by the experiment of the prototype solenoid for coupling solenoid, which will be designed, fabricated and tested at ICST.
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1979 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Book Synopsis The Physical Connection and Magnetic Coupling of the MICE CoolingChannel Magnets and the Magnet Forces for Various MICE OperatingModes by :
Download or read book The Physical Connection and Magnetic Coupling of the MICE CoolingChannel Magnets and the Magnet Forces for Various MICE OperatingModes written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A key issue in the construction of the MICE cooling channel is the magnetic forces between various elements in the cooling channel and the detector magnets. This report describes how the MICE cooling channel magnets are hooked to together so that the longitudinal magnetic forces within the cooling channel can be effectively connected to the base of the experiment. This report presents a magnetic force and stress analysis for the MICE cooling channel magnets, even when longitudinal magnetic forces as large as 700 kN (70 tons) are applied to the vacuum vessel of various magnets within the MICE channel. This report also shows that the detector magnets can be effectively separated from the central MICE cooling channel magnets without damage to either type of magnet component.
Book Synopsis Proceedings of the Workshop on Structural Analysis Needs for Magnetic Fusion Energy Superconducting Magnets by :
Download or read book Proceedings of the Workshop on Structural Analysis Needs for Magnetic Fusion Energy Superconducting Magnets written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The technical portions of the meeting were divided into three major sessions as follows: (1) Review of methods being presently used by the MFE community for structural evaluation of current designs. (2) Future structural analysis needs. (3) Open discussions dealing with adequacy of present methods, the improvements needed for MFE magnet structural analysis, and the establishment of an MFE magnet structural advisory group. Summaries of the individual talks are presented.
Book Synopsis The Mechanical and Thermal Design for the MICE Focusing SolenoidMagnet System by :
Download or read book The Mechanical and Thermal Design for the MICE Focusing SolenoidMagnet System written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The focusing solenoids for MICE surround energy absorbers that are used to reduce the transverse momentum of the muon beam that is being cooled within MICE. The focusing solenoids will have a warm-bore diameter of 470 mm. Within this bore is a flask of liquid hydrogen or a room temperature beryllium absorber. The focusing solenoid consists of two coils wound with a copper matrix Nb-Ti conductor originally designed for MRI magnets. The two coils have separate leads, so that they may be operated at the same polarity or at opposite polarity. The focusing magnet is designed so that it can be cooled with a pair of 1.5 W (at 4.2 K) coolers. The MICE cooling channel has three focusing magnets with their absorbers. The three focusing magnets will be hooked together in series for a circuit stored-energy of about 9.0 MJ. Quench protection for the focusing magnets is discussed. This report presents the mechanical and thermal design parameters for this magnet, including the results of finite element calculations of mechanical forces and heat flow in the magnet cold mass.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1967 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Airframe Structural Design by : Chunyun Niu
Download or read book Airframe Structural Design written by Chunyun Niu and published by Adaso Adastra Engineering Center. This book was released on 1999 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Airframe Stress Analysis and Sizing by : Chʻun-yün Niu
Download or read book Airframe Stress Analysis and Sizing written by Chʻun-yün Niu and published by . This book was released on 1997 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Popular Science written by and published by . This book was released on 2004-12 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.
