Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Shop Floor Control Systems
Download Shop Floor Control Systems full books in PDF, epub, and Kindle. Read online Shop Floor Control Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Shop Floor Control - A Systems Perspective by : Eric Scherer
Download or read book Shop Floor Control - A Systems Perspective written by Eric Scherer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shop floor control and namely the problem of job shop scheduling have been fields of research for a long time. However, until now no comprehensive framework on the various aspects exists. This book will provide a systems perspective towards shop floor control by stressing its sociotechnical and cybernetical nature. It focuses on the behavioral aspects of control activities and sees the shop floor as the center of value-adding manufacturing activities within an enterprise. The book enables the reader to understand the interaction of organization, information technology and human resources. This eventually allows to achieve holistic and agile solutions and facilitates profound organizational change. The book will therefore provide a welcome addition to several standard textbooks on the issue.
Book Synopsis Shop Floor Control Systems by : A. Bauer
Download or read book Shop Floor Control Systems written by A. Bauer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years there has been a tremendous upsurge of interest in manufac turing systems design and analysis. Large industrial companies have realized that their manufacturing facilities can be a source of tremendous opportunity if managed well or a huge corporate liability if managed poorly. In particular industrial managers have realized the potential of well designed and installed production planning and control systems. Manufacturing, in an environment of short product life cycles and increasing product diversity, looks to tech niques such as manufacturing resource planning, Just In Time (lIT) and total quality control among others to meet the challenge. Customers are demanding high quality products and very fast turn around on orders. Manufacturing personnel are aware of the lead time from receipt of order to delivery of completed orders at the customer's premises. It is clear that this production lead time is, for the majority of manufacturing firms, greatly in excess of the actual processing or manufacturing time. There are many reasons for this, among them poor coordination between the sales and manufacturing function. Some are within the control of the manufacturing function. Others are not.
Book Synopsis MANUFACTURING PLANNING AND CONTROL SYSTEMS FOR SUPPLY CHAIN MANAGEMENT by : Thomas E. Vollmann
Download or read book MANUFACTURING PLANNING AND CONTROL SYSTEMS FOR SUPPLY CHAIN MANAGEMENT written by Thomas E. Vollmann and published by McGraw Hill Professional. This book was released on 2004-08-20 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Planning and Control Systems for Supply Chain Management is both the classic field handbook for manufacturing professionals in virtually any industry and the standard preparatory text for APICS certification courses. This essential reference has been totally revised and updated to give professionals the knowledge they need.
Book Synopsis The Digital Shopfloor- Industrial Automation in the Industry 4.0 Era by : John Soldatos
Download or read book The Digital Shopfloor- Industrial Automation in the Industry 4.0 Era written by John Soldatos and published by CRC Press. This book was released on 2022-09-01 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s competitive global environment, manufacturers are offered with unprecedented opportunities to build hyper-efficient and highly flexible plants, towards meeting variable market demand, while at the same time supporting new production models such as make-to-order (MTO), configure-to-order (CTO) and engineer-to-order (ETO). During the last couple of years, the digital transformation of industrial processes is propelled by the emergence and rise of the fourth industrial revolution (Industry4.0). The latter is based on the extensive deployment of Cyber-Physical Production Systems (CPPS) and Industrial Internet of Things (IIoT) technologies in the manufacturing shopfloor, as well as on the seamless and timely exchange of digital information across supply chain participants. The benefits of Industry 4.0 have been already proven in the scope of pilot and production deployments in a number of different use cases including flexibility in automation, predictive maintenance, zero defect manufacturing and more. Despite early implementations and proof-of-concepts, CPPS/IIoT deployments are still in their infancy for a number of reasons, including:• Manufacturers’ poor awareness about digital manufacturing solutions and their business value potential, as well as the lack of relevant internal CPPS/IIoT knowledge.• The high costs that are associated with the deployment, maintenance and operation of CPPS systems in the manufacturing shopfloors, which are particularly challenging in the case of SME (Small Medium Enterprises) manufacturers that lack the equity capital needed to invest in Industry 4.0.• The time needed to implement CPPS/IIoT and the lack of a smooth and proven migration path from existing OT solutions.• The uncertainty over the business benefits and impacts of IIoT and CPPS technologies, including the lack of proven methods for the techno-economic evaluation of Industry4.0 systems. • Manufacturers’ increased reliance on external integrators, consultants and vendors. • The absence of a well-developed value chain needed to sustain the acceptance of these new technologies for digital automation.In order to alleviate these challenges, three European Commission funded projects (namely H2020 FAR-EDGE (http://www.far-edge.eu/), H2020 DAEDALUS (http://daedalus.iec61499.eu) and H2020 AUTOWARE (http://www.autoware-eu.org/)) have recently joined forces towards a “Digital Shopfloor Alliance”. The Alliance aims at providing leading edge and standards based digital automation solutions, along with guidelines and blueprints for their effective deployment, validation and evaluation. The present book provides a comprehensive description of some of the most representative solutions that offered by these three projects, along with the ways these solutions can be combined in order to achieve multiplier effects and maximize the benefits of their use. The presented solutions include standards-based digital automation solutions, following different deployment paradigms, such as cloud and edge computing systems. Moreover, they also comprise a rich set of digital simulation solutions, which are explored in conjunction with the H2020 MAYA project (http://www.maya-euproject.com/). The latter facilitate the testing and evaluation of what-if scenarios at low risk and cost, but also without disrupting shopfloor operations. As already outlined, beyond leading edge scientific and technological development solutions, the book comprises a rich set of complementary assets that are indispensable to the successful adoption of IIoT/CPPS in the shopfloor. The book is structured in three parts as follows: • The first part of the book is devoted to digital automation platforms. Following an introduction to Industry 4.0 in general and digital automation platforms in particular, this part presents the digital automation platforms of the FAR-EDGE, AUTOWARE and DAEDALUS projects. • The second part of the book focuses on the presentation of digital simulation and digital twins’ functionalities. These include information about the models that underpin digital twins, as well as the simulators that enable experimentation with these processes over these digital models. • The third part of the book provides information about complementary assets and supporting services that boost the adoption of digital automation functionalities in the Industry4.0 era. Training services, migration services and ecosystem building services are discussed based on the results of the three projects of the Digital Shopfloor Alliance. The target audience of the book includes:• Researchers in the areas of Digital Manufacturing and more specifically in the areas of digital automation and simulation, who wish to be updated about latest Industry4.0 developments in these areas.• Manufacturers, with an interest in the next generation of digital automation solutions based on Cyber-Physical systems.• Practitioners and providers of Industrial IoT solutions, which are interested in the implementation of use cases in automation, simulation and supply chain management.• Managers wishing to understand technologies and solutions that underpin Industry4.0, along with representative applications in the shopfloor and across the supply chain.
Book Synopsis Kanban for the Shopfloor by : Productivity Press Development Team
Download or read book Kanban for the Shopfloor written by Productivity Press Development Team and published by CRC Press. This book was released on 2020-06-29 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kanban is the name given to the inventory control card used in a pull system. The primary benefit of kanban is to reduce overproduction, the worst of the seven deadly wastes. A true kanban system produces exactly what is ordered, when it is ordered, and in the quantities ordered. It is essentially a dynamic work order that moves with the material. Each kanban identifies the part or subassembly unit and indicates where each one came from and where each is going. Used this way, kanban acts as a system of information that integrates your plant, connects all processes one to another, and connects the entire value stream to customer demand. Kanban for the Shopfloor provides a working manual for those seeking to implement this method of production control in any operation. It defines the various terms and methods employed in kanbans, and illustrates how when adhered to, kanban is an element of continuous improvement that ultimately leads to the ideal of one-piece flow." In addition to reducing the waste of overproduction, kanban will help your company increase flexibility to respond to customer demand, coordinate production of small lots and wide product variety, and simplify the procurement process. About the Shopfloor Series: Put proven improvement tools in the hands of your entire workforce! Progressive shopfloor improvement techniques are imperative for manufacturers who want to stay competitive and to achieve world class excellence. And it's the comprehensive education of all shopfloor workers that ensures full participation and success when implementing new programs. The Shopfloor Series books make practical information accessible to everyone by presenting major concepts and tools in simple, clear language and at a reading level that has been adjusted for operators by skilled instructional designers. One main idea is presented every two to four pages so that the book can be picked up and put down easily. Each chapter begins with an overview and ends with a summary section. Helpful illustrations are used throughout. Other topics in the Shopfloor Series: Kanban, 5S, Quick Changeover, Mistake-Proofing, Just-in-Time, TPM, Cellular Manufacturing
Book Synopsis SHOP FLOOR MANAGEMENT by : PRABHU TL
Download or read book SHOP FLOOR MANAGEMENT written by PRABHU TL and published by NestFame Creations Pvt Ltd.. This book was released on with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern manufacturing is more advanced than ever. There are too many moving parts between human errors, equipment breakdowns, delayed shipments, and hurried orders. Errors are inevitable without adequate planning. Preplanning, planning, staffing, directing, monitoring, and controlling actions that improve shop efficiency and analysis are all parts of shop floor management. The process of converting raw resources (inputs) into the intended output (products or services) is referred to as production or operations activity. Production is a collection of consecutive tasks that generate a desirable product that customers will accept and that also satisfies their needs in terms of quantity and intended use. Using effective production planning and control, the goals can be attained. Smart manufacturers are swiftly implementing the most recent business process optimization techniques in response to the changing production environment, and shop floor management is probably the most crucial technique on the list. A shop floor is a place where production or assembly is done. Either the labor would have to do this manually, or sophisticated automated systems would have to do it. Consequently, shop floor management might be characterized as management at the point of action. At this location where value is created, managers and production staff gather every day to thoroughly examine the machinery, inventory, storage, and manufacturing processes in order to spot any disruptions or deviations in the value-added processes and, where appropriate, to start corrective action.
Book Synopsis Manufacturing Systems by : George Chryssolouris
Download or read book Manufacturing Systems written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.
Book Synopsis Information Infrastructure Systems for Manufacturing by : Jan Goossenaerts
Download or read book Information Infrastructure Systems for Manufacturing written by Jan Goossenaerts and published by Springer. This book was released on 2013-06-05 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the verge of the global information society, enterprises are competing for markets that are becoming global and driven by customer demand, and where growing specialisation is pushing them to focus on core competencies and look for partnerships to provide products and services. Simultaneously the public demands environmentally sustainable industries and urges manufacturers to mind the whole life span of their products and production resources. Information infrastructure systems are anticipated to offer services enabling and catalyzing the strategies of manufacturing companies responding to these challenges: they support the formation of extended enterprises, the mastering of full product and process life cycles, and the digitalization of the development process. Information infrastructure systems would accommodate access to and transformation of information as required by the various authorized stakeholders involved in the life phases of products or production resources. Services should be available to select and present all relevant information for situations involving any kind of players, during any life phase of a product or artifact, at any moment and at any place.
Book Synopsis Intelligent Robotics and Applications by : Caihua Xiong
Download or read book Intelligent Robotics and Applications written by Caihua Xiong and published by Springer Science & Business Media. This book was released on 2008-09-29 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volumes constitute the refereed proceedings of the First International Conference on Intelligent Robotics and Applications, ICIRA 2008, held in Wuhan, China, in October 2008. The 265 revised full papers presented were thoroughly reviewed and selected from 552 submissions; they are devoted but not limited to robot motion planning and manipulation; robot control; cognitive robotics; rehabilitation robotics; health care and artificial limb; robot learning; robot vision; human-machine interaction & coordination; mobile robotics; micro/nano mechanical systems; manufacturing automation; multi-axis surface machining; realworld applications.
Book Synopsis Realising CIM's Industrial Potential by : C. Kooij
Download or read book Realising CIM's Industrial Potential written by C. Kooij and published by IOS Press. This book was released on 1993 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CIM-Europe provides a focal point for reporting on progress in Computer Integrated Manufacturing (CIM). CIM practitioners, decision makers and researchers exchange experiences gained in developing and implementing CIM technologies. This work deals with the application of technology innovation to industrial demand.
Book Synopsis Manufacturing Systems: Theory and Practice by : George Chryssolouris
Download or read book Manufacturing Systems: Theory and Practice written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2006 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.
Book Synopsis Computer control of flexible manufacturing systems by : S. Joshi
Download or read book Computer control of flexible manufacturing systems written by S. Joshi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the approach of the 21st century, and the current trends in manufacturing, the role of computer-controlled flexible manufacturing an integral part in the success of manufacturing enterprises. will take Manufacturing environments are changing to small batch (with batch sizes diminishing to a quantity of one), larger product variety, produc tion on demand with low lead times, with the ability to be 'agile.' This is in stark contrast to conventional manufacturing which has relied on economies of scale, and where change is viewed as a disruption and is therefore detrimental to production. Computer integrated manufac turing (CIM) and flexible manufacturing practices are a key component in the transition from conventional manufacturing to the 'new' manu facturing environment. While the use of computers in manufacturing, from controlling indi vidual machines (NC, Robots, AGVs etc.) to controlling flexible manu facturing systems (FMS) has advanced the flexibility of manufacturing environments, it is still far from reaching its full potential in the environment of the future. Great strides have been made in individual technologies and control of FMS has been the subject of considerable research, but computerized shop floor control is not nearly as flexible or integrated as hyped in industrial and academic literature. In fact, the integrated systems have lagged far behind what could be achieved with existing technology.
Book Synopsis Theory And Practice Of Control And Systems - Proceedings Of The 6th Ieee Mediterranean Conference by : Antonio Tornambe
Download or read book Theory And Practice Of Control And Systems - Proceedings Of The 6th Ieee Mediterranean Conference written by Antonio Tornambe and published by World Scientific. This book was released on 1999-01-04 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers together all the lectures presented at the 6th IEEE Mediterranean Conference. It focuses on the mathematical aspects in the theory and practice of control and systems, including stability and stabilizability, robust control, adaptive control, robotics and manufacturing; these topics are under intense investigation and development in the engineering and mathematics communities. The volume should have immediate appeal for a large group of engineers and mathematicians who are interested in very abstract as well as very concrete aspects of control and system theory.
Book Synopsis Shop Floor Control by : Steven A. Melnyk
Download or read book Shop Floor Control written by Steven A. Melnyk and published by McGraw-Hill Trade. This book was released on 1985 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Agile Manufacturing by : A. Gunasekaran
Download or read book Agile Manufacturing written by A. Gunasekaran and published by Elsevier. This book was released on 2001-01-25 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agile manufacturing is defined as the capability of surviving and prospering in a competitive environment of continuous and unpredictable change by reacting quickly and effectively to changing markets, driven by customer-designed products and services. Critical to successfully accomplishing AM are a few enabling technologies such as the standard for the exchange of products (STEP), concurrent engineering, virtual manufacturing, component-based hierarchical shop floor control system, information and communication infrastructure, etc. The scope of the book is to present the undergraduate and graduate students, senior managers and researchers in manufacturing systems design and management, industrial engineering and information technology with the conceptual and theoretical basis for the design and implementation of AMS. Also, the book focuses on broad policy directives and plans of agile manufacturing that guide the monitoring and evaluating the manufacturing strategies and their performance. A problem solving approach is taken throughout the book, emphasizing the context of agile manufacturing and the complexities to be addressed.
Book Synopsis Dare to Un-Lead by : Celine Schillinger
Download or read book Dare to Un-Lead written by Celine Schillinger and published by Figure 1 Publishing. This book was released on 2022-05-03 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2022 PORCHLIGHT LEADERSHIP & STRATEGY BOOK OF THE YEAR A transformational book for trying times, Dare to Un-Lead will challenge the way you think and feel about the role of leadership in your life. What is revered as leadership today is often nothing more than a destructive set of obsolete behaviors and systems evolved from the centuries-old industrial theories popularized by Frederick Taylor and Henry Ford. This mode of leadership harms individuals and societies and must be reinvented to better reflect the way we live, trade, and work in the 21st century. Dare to Un-Lead explores how contemporary organizations can transform leadership from a top-down hegemony to one that empowers people to lead together through the concepts of liberty, equality, and community. Kotter affiliate and global engagement leadership specialist Céline Schillinger combines her experience enacting digital-enabled, people-focused collective work practices in global corporate structures with a deep analysis of leadership—studied through multiple lenses and timely sources of knowledge—to provide original insights into why these practices work. The result is a series of evidence-based approaches for reinventing collective performance across organizations in a post-pandemic world. From large corporations to small businesses, the lessons learned in this landmark book, implemented individually and collectively over time, will make our workplaces more equal, our jobs more gratifying, and our economies more profitable. And that will make the world a better place.
Book Synopsis Enabling Manufacturing Competitiveness and Economic Sustainability by : Hoda A. ElMaraghy
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
