Reliability of Selective Laser Melted AlSi12 Alloy for Quasistatic and Fatigue Applications

Download Reliability of Selective Laser Melted AlSi12 Alloy for Quasistatic and Fatigue Applications PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3658234253
Total Pages : 162 pages
Book Rating : 4.6/5 (582 download)

DOWNLOAD NOW!


Book Synopsis Reliability of Selective Laser Melted AlSi12 Alloy for Quasistatic and Fatigue Applications by : Shafaqat Siddique

Download or read book Reliability of Selective Laser Melted AlSi12 Alloy for Quasistatic and Fatigue Applications written by Shafaqat Siddique and published by Springer. This book was released on 2018-09-18 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selective laser melting (SLM) has established itself as the most prominent additive manufacturing (AM) process for metallic structures in aerospace, automotive and medical industries. For a reliable employment of this process, it has to conform to the demanding requirements of these industries in terms of quasistatic and, especially, fatigue performance. Shafaqat Siddique identifies the influence of SLM processing conditions on the microstructural features, and their corresponding influence on the mechanical behavior of the processed AlSi12 alloy structures. The author also gives insight into integrated manufacturing by combining conventional and SLM processes to get the synergic benefits. Requirements for fatigue-resistant designs in additive manufacturing are highlighted, and a novel method is developed for agile fatigue life prediction. About the Author Shafaqat Siddique worked as Scientific Assistant at TU Dortmund University, Department of Materials Test Engineering (WPT), headed by Prof. Dr.-Ing. Frank Walther, and completed his Ph.D. research in cooperation with Laser Zentrum Nord (LZN) in Hamburg. He continues his post-doctoral research at TU Dortmund University, Germany.

TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings

Download TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3030652610
Total Pages : 1062 pages
Book Rating : 4.0/5 (36 download)

DOWNLOAD NOW!


Book Synopsis TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings by : The Minerals, Metals & Materials Society

Download or read book TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2021-02-23 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 150th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Machine Learning Algorithm for Fatigue Fields in Additive Manufacturing

Download Machine Learning Algorithm for Fatigue Fields in Additive Manufacturing PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3658402377
Total Pages : 289 pages
Book Rating : 4.6/5 (584 download)

DOWNLOAD NOW!


Book Synopsis Machine Learning Algorithm for Fatigue Fields in Additive Manufacturing by : Mustafa Mamduh Mustafa Awd

Download or read book Machine Learning Algorithm for Fatigue Fields in Additive Manufacturing written by Mustafa Mamduh Mustafa Awd and published by Springer Nature. This book was released on 2023-01-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failure of structures used in transportation, industry, medical equipment, and electronic components needs to build a link between cutting-edge experimental characterization and probabilistically grounded numerical and artificially intelligent tools. The physics involved in this process chain is computationally prohibitive to comprehend using traditional computation methods. Using machine learning and Bayesian statistics, a defect-correlated estimate of fatigue strength was developed. Fatigue, which is a random variable, is studied in a Bayesian-based machine learning algorithm. The stress-life model was used based on the compatibility condition of life and load distributions. The defect-correlated assessment of fatigue strength was established using the proposed machine learning and Bayesian statistics algorithms. It enabled the mapping of structural and process-induced fatigue characteristics into a geometry-independent load density chart across a wide range of fatigue regimes.

Proceedings of the 7th International Conference on Fracture Fatigue and Wear

Download Proceedings of the 7th International Conference on Fracture Fatigue and Wear PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 9811304114
Total Pages : 831 pages
Book Rating : 4.8/5 (113 download)

DOWNLOAD NOW!


Book Synopsis Proceedings of the 7th International Conference on Fracture Fatigue and Wear by : Magd Abdel Wahab

Download or read book Proceedings of the 7th International Conference on Fracture Fatigue and Wear written by Magd Abdel Wahab and published by Springer. This book was released on 2018-07-14 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather a selection of peer-reviewed papers presented at the 7th International Conference on Fracture Fatigue and Wear (FFW 2018), held at Ghent University, Belgium on 9–10 July 2018. The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications of fracture mechanics, fatigue of materials, tribology and wear of materials. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of fracture fatigue and wear.

Alloying

Download Alloying PDF Online Free

Author :
Publisher : ASM International
ISBN 13 : 1615030638
Total Pages : 658 pages
Book Rating : 4.6/5 (15 download)

DOWNLOAD NOW!


Book Synopsis Alloying by : Joseph R. Davis

Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.

Additive Manufacturing Volume 2

Download Additive Manufacturing Volume 2 PDF Online Free

Author :
Publisher : MDPI
ISBN 13 : 3039284142
Total Pages : 351 pages
Book Rating : 4.0/5 (392 download)

DOWNLOAD NOW!


Book Synopsis Additive Manufacturing Volume 2 by : Prashanth Konda Gokuldoss

Download or read book Additive Manufacturing Volume 2 written by Prashanth Konda Gokuldoss and published by MDPI. This book was released on 2020-04-15 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers and scientists, because of its ability to produce materials with a complex shape without theoretical restrictions and with added functionalities. There are several advantages to employing additive manufacturing as the primary additive manufacturing process. However, there exist several challenges that need to be addressed systematically. A couple such issues are alloy design and process development. Traditionally alloys designed for conventional cast/powder metallurgical processes were fabricated using advanced AM processes. This is the wrong approach considering that the alloys should be coined based on the process characteristics and meta-stable nature of the process. Hence, we must focus on alloy design and development for AM that suits the AM processes. The AM processes, however, improve almost every day, either in terms of processing capabilities or processing conditions. Hence, the processing part warrants a section that is devoted to these advancements and innovations. Accordingly, the present Special Issue (book) focuses on two aspects of alloy development and process innovations. Here, 45 articles are presented covering different AM processes including selective laser melting, electron beam melting, laser cladding, direct metal laser sintering, ultrasonic consolidation, wire arc additive manufacturing, and hybrid manufacturing. I believe that this Special Issue bears is vital to the field of AM and will be a valuable addition.

Additive Manufacturing Technologies

Download Additive Manufacturing Technologies PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3030561275
Total Pages : 685 pages
Book Rating : 4.0/5 (35 download)

DOWNLOAD NOW!


Book Synopsis Additive Manufacturing Technologies by : Ian Gibson

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Metallic Microlattice Structures

Download Metallic Microlattice Structures PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3030152324
Total Pages : 115 pages
Book Rating : 4.0/5 (31 download)

DOWNLOAD NOW!


Book Synopsis Metallic Microlattice Structures by : Robert Mines

Download or read book Metallic Microlattice Structures written by Robert Mines and published by Springer. This book was released on 2019-03-21 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work reviews the current state of the art in metallic microlattice structures, manufactured using the additive manufacturing processes of selective laser melting, electron beam melting, binder jetting and photopolymer wave guides. The emphasis is on structural performance (stiffness, strength and collapse). The field of additively manufactured metallic microlattice structures is fast changing and wide ranging, and is being driven by developments in manufacturing processes. This book takes a number of specific structural applications, viz. sandwich beams and panels, and energy absorbers, and a number of conventional metallic materials, and discusses the use of additive manufactured metallic microlattice structures to improve and enhance these structural performances. Structural performances considered includes such non linear effects as plasticity, material rupture, elastic and plastic instabilities, and impact loading. The specific discussions are put into the context of wider issues, such as the effects of realisation processes, the effects of structural scale, use of sophisticated analysis and synthesis methodologies, and the application of existing (conventional) structural theories. In this way, the specific discussions are put into the context of the emerging general fields of Architectured (Architected) Materials and Mechanical Metamaterials.

Selective Laser Melting: Materials and Applications

Download Selective Laser Melting: Materials and Applications PDF Online Free

Author :
Publisher :
ISBN 13 : 9783039285792
Total Pages : 98 pages
Book Rating : 4.2/5 (857 download)

DOWNLOAD NOW!


Book Synopsis Selective Laser Melting: Materials and Applications by : Prashanth Konda Gokuldoss

Download or read book Selective Laser Melting: Materials and Applications written by Prashanth Konda Gokuldoss and published by . This book was released on 2020 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers, and scientists. AM has the ability to fabricate materials to produce parts with complex shapes without any theoretical restrictions combined with added functionalities. Selective laser melting (SLM), also known as laser-based powder bed processing (LPBF), is one of the main AM process that can be used to fabricate wide variety of materials that are Al-, Ti-, Fe-, Ni-, Co-, W-, Ag-, and Au-based, etc. However, several challenges need to be addressed systematically, such as development of new materials that suit the SLM process conditions so the process capabilities can be fully used to produce new properties in these materials. Other issues in the field are the lack of microstructure-property correlations, premature failure, etc. Accordingly, this Special Issue (book) focuses mainly on the microstructure-correlation in three different alloys: AlSi10Mg, Ti6Al4V, and 304L stainless steel, where six articles are presented. Hence, this Special Issue outlines microstructure-property correlations in the SLM processed materials and provides a value addition to the field of AM.

Mechanical Fatigue of Metals

Download Mechanical Fatigue of Metals PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3030139808
Total Pages : 386 pages
Book Rating : 4.0/5 (31 download)

DOWNLOAD NOW!


Book Synopsis Mechanical Fatigue of Metals by : José A.F.O. Correia

Download or read book Mechanical Fatigue of Metals written by José A.F.O. Correia and published by Springer. This book was released on 2019-05-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the XIX International Colloquium on Mechanical Fatigue of Metals, held at the Faculty of Engineering of the University of Porto, Portugal, 5-7 September 2018. This International Colloquium facilitated and encouraged the exchange of knowledge and experiences among the different communities involved in both basic and applied research in the field of the fatigue of metals, looking at the problem of fatigue exploring analytical and numerical simulative approaches. Fatigue damage represents one of the most important types of damage to which structural materials are subjected in normal industrial services that can finally result in a sudden and unexpected abrupt fracture. Since metal alloys are still today the most used materials in designing the majority of components and structures able to carry the highest service loads, the study of the different aspects of metals fatigue attracts permanent attention of scientists, engineers and designers.

Revolutionizing Aircraft Materials and Processes

Download Revolutionizing Aircraft Materials and Processes PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 303035346X
Total Pages : 405 pages
Book Rating : 4.0/5 (33 download)

DOWNLOAD NOW!


Book Synopsis Revolutionizing Aircraft Materials and Processes by : Spiros Pantelakis

Download or read book Revolutionizing Aircraft Materials and Processes written by Spiros Pantelakis and published by Springer Nature. This book was released on 2020-03-11 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the emerging needs of the aerospace industry by discussing recent developments and future trends of aeronautic materials. It is aimed at advancing existing materials and fostering the ability to develop novel materials with less weight, increased mechanical properties, more functionality, diverse manufacturing methods, and recyclability. The development of novel materials and multifunctional materials has helped to increase efficiency and safety, reduce costs, and decrease the environmental foot print of the aeronautical industry. In this book, integral metallic structures designed by disruptive concepts, including topology optimization and additive manufacturing, are highlighted.

Techno-Societal 2018

Download Techno-Societal 2018 PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3030169626
Total Pages : 968 pages
Book Rating : 4.0/5 (31 download)

DOWNLOAD NOW!


Book Synopsis Techno-Societal 2018 by : Prashant M. Pawar

Download or read book Techno-Societal 2018 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2019-11-06 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2018: the 2nd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus is on technologies that help develop and improve society, in particular on issues such as the betterment of differently abled people, environment impact, livelihood, rural employment, agriculture, healthcare, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.

Fundamentals of Laser Powder Bed Fusion of Metals

Download Fundamentals of Laser Powder Bed Fusion of Metals PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 0128240911
Total Pages : 678 pages
Book Rating : 4.1/5 (282 download)

DOWNLOAD NOW!


Book Synopsis Fundamentals of Laser Powder Bed Fusion of Metals by : Igor Yadroitsev

Download or read book Fundamentals of Laser Powder Bed Fusion of Metals written by Igor Yadroitsev and published by Elsevier. This book was released on 2021-05-23 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. - Presents laser powder bed fusion fundamentals, as well as their inherent challenges - Provides an up-to-date summary of this advancing technology and its potential - Provides a comprehensive textbook for universities, as well as a reference for industry - Acts as quick-reference guide

Passenger Car Tires and Wheels

Download Passenger Car Tires and Wheels PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3319501186
Total Pages : 283 pages
Book Rating : 4.3/5 (195 download)

DOWNLOAD NOW!


Book Synopsis Passenger Car Tires and Wheels by : Günter Leister

Download or read book Passenger Car Tires and Wheels written by Günter Leister and published by Springer. This book was released on 2018-03-05 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from the beginning, this book explains the development process of all parts related to the topics tire, wheel and tire pressure monitoring system. This is continued by the modern project management methods in the development process of the parts and the necessary tests to build up this safety relevant components. Modern methods for simulations are described.

Proceedings of the 11th International Conference on Porous Metals and Metallic Foams (MetFoam 2019)

Download Proceedings of the 11th International Conference on Porous Metals and Metallic Foams (MetFoam 2019) PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 3030427986
Total Pages : 208 pages
Book Rating : 4.0/5 (34 download)

DOWNLOAD NOW!


Book Synopsis Proceedings of the 11th International Conference on Porous Metals and Metallic Foams (MetFoam 2019) by : Nihad Dukhan

Download or read book Proceedings of the 11th International Conference on Porous Metals and Metallic Foams (MetFoam 2019) written by Nihad Dukhan and published by Springer Nature. This book was released on 2020-04-07 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of MetFoam conference series is to provide a state-of-the-art review on lightweight porous metals and metallic foams and a forum for discussions and networking opportunities for scientists working in this field. Topics included in this volume include the following: • Fabrication by conventional and novel methods including additive manufacturing • Characterization • Properties of compressed and uncompressed foam • Design of porous metals, metallic foams, and lattice structures• Fluid, heat, and mass transfer • Porous biomaterials• Nanoporous metals• Industrial applications of porous metals and metallic foams

Metal Additive Manufacturing

Download Metal Additive Manufacturing PDF Online Free

Author :
Publisher : John Wiley & Sons
ISBN 13 : 1119210836
Total Pages : 624 pages
Book Rating : 4.1/5 (192 download)

DOWNLOAD NOW!


Book Synopsis Metal Additive Manufacturing by : Dyuti Sarker

Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.

TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings

Download TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings PDF Online Free

Author :
Publisher :
ISBN 13 : 9783030652623
Total Pages : pages
Book Rating : 4.6/5 (526 download)

DOWNLOAD NOW!


Book Synopsis TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings by : Minerals, Metals and Materials Society. Annual Meeting

Download or read book TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings written by Minerals, Metals and Materials Society. Annual Meeting and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 150th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.