Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Reinforced Concrete Columns With High Strength Concrete And Steel Reinforcement
Download Reinforced Concrete Columns With High Strength Concrete And Steel Reinforcement full books in PDF, epub, and Kindle. Read online Reinforced Concrete Columns With High Strength Concrete And Steel Reinforcement ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Design of Concrete Structures Using High-strength Steel Reinforcement by : Bahram M. Shahrooz
Download or read book Design of Concrete Structures Using High-strength Steel Reinforcement written by Bahram M. Shahrooz and published by Transportation Research Board. This book was released on 2011 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaluates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online.
Book Synopsis Design of High Strength Steel Reinforced Concrete Columns by : Sing-Ping Chiew
Download or read book Design of High Strength Steel Reinforced Concrete Columns written by Sing-Ping Chiew and published by CRC Press. This book was released on 2018-04-17 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials – columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volume provides detailed worked examples on use of these high strength materials. This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.
Book Synopsis Design Examples for High Strength Steel Reinforced Concrete Columns by : Sing-Ping Chiew
Download or read book Design Examples for High Strength Steel Reinforced Concrete Columns written by Sing-Ping Chiew and published by CRC Press. This book was released on 2018-04-17 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the companion volume to Design of High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. This book provides a large number of worked examples for the design of high strength steel reinforced concrete (SRC) columns. It is based on the Eurocode 4 approach, but goes beyond this to give much needed guidance on the narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete. Special considerations are given to resistance calculations that maximize the full strength of the materials, with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. These examples build on the design principles set out in the companion volume, allowing the readers to practice and understand the EC4 methodology easily. Structural engineers and designers who are familiar with basic EC4 design should find these design examples particularly helpful, whilst engineering undergraduate and graduate students who are studying composite steel concrete design and construction should easily gain further understanding from working through the worked examples which are set out in a step-by-step clearly fashion.
Book Synopsis Reinforced Concrete with FRP Bars by : Antonio Nanni
Download or read book Reinforced Concrete with FRP Bars written by Antonio Nanni and published by CRC Press. This book was released on 2014-03-05 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion-resistant, electromagnetic transparent and lightweight fiber-reinforced polymers (FRPs) are accepted as valid alternatives to steel in concrete reinforcement. Reinforced Concrete with FRP Bars: Mechanics and Design, a technical guide based on the authors more than 30 years of collective experience, provides principles, algorithms, and pr
Book Synopsis Reinforced Concrete Columns with High Strength Concrete and Steel Reinforcement by : Halil Sezen
Download or read book Reinforced Concrete Columns with High Strength Concrete and Steel Reinforcement written by Halil Sezen and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Basic Principles of Concrete Structures by : Xianglin Gu
Download or read book Basic Principles of Concrete Structures written by Xianglin Gu and published by Springer. This book was released on 2015-12-09 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications. The book will focus on both the theoretical derivations and the engineering practices.
Book Synopsis Strength of High Strength Concrete Columns Under Eccentric Compression by : R. H. Basappa Setty
Download or read book Strength of High Strength Concrete Columns Under Eccentric Compression written by R. H. Basappa Setty and published by . This book was released on 1995 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research work involved a study of behaviour and strength of eccentrically loaded High Strength Concrete columns. The research comprised experimental and analytical components. With regard to experimental work, twelve columns were manufactured and tested to failure. All columns were rectangular in cross-section with 300 mm x 100 mm as dimensions. The test specimens were loaded about the minor axis. The ratio of longitudinal reinforcement was either 1.47% (4 - 12 mm diameter bars) or 2.2% (6 - 12 mm diameter bars). The lateral reinforcement was in the form of rectangular closed ties made of 6 mm wires (W6). The spacing of ties was generally 50 mm, but, was decreased to 30 mm, at either ends to avoid premature failure.
Book Synopsis Fire Resistance of Concrete Columns by : Walter Austin Hull
Download or read book Fire Resistance of Concrete Columns written by Walter Austin Hull and published by . This book was released on 1925 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis High Strength Concrete by : Natalie A. Lloyd
Download or read book High Strength Concrete written by Natalie A. Lloyd and published by . This book was released on 1993 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Reinforced Concrete Beams, Columns and Frames by : Jostein Hellesland
Download or read book Reinforced Concrete Beams, Columns and Frames written by Jostein Hellesland and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.
Book Synopsis Structural Steelwork by : Dennis Lam
Download or read book Structural Steelwork written by Dennis Lam and published by CRC Press. This book was released on 2013-09-10 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, this fourth edition of Structural Steelwork: Design to Limit State Theory describes the design theory and code requirements for common structures, connections, elements, and frames. It provides a comprehensive introduction to structural steelwork design with detailed explanations of the principles underlying steel design. See what’s in the Fourth Edition: All chapters updated and rearranged to comply with Eurocode 3 Compliant with the other Eurocodes Coverage of both UK and Singapore National Annexes Illustrated with fully worked examples and practice problems The fourth edition of an established and popular text, the book provides guidance for students of structural and civil engineering and is also sufficiently informative for practising engineers and architects who need an introduction to the Eurocodes.
Download or read book Reinforced Concrete written by B.S. Choo and published by CRC Press. This book was released on 2018-10-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a highly practical text gives a detailed presentation of the design of common reinforced concrete structures to limit state theory in accordance with BS 8110.
Book Synopsis Composites for Construction by : Lawrence C. Bank
Download or read book Composites for Construction written by Lawrence C. Bank and published by John Wiley & Sons. This book was released on 2006-07-21 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook on the design of FRP for structural engineering applications Composites for Construction is a one-of-a-kind guide to understanding fiber-reinforced polymers (FRP) and designing and retrofitting structures with FRP. Written and organized like traditional textbooks on steel, concrete, and wood design, it demystifies FRP composites and demonstrates how both new and retrofit construction projects can especially benefit from these materials, such as offshore and waterfront structures, bridges, parking garages, cooling towers, and industrial buildings. The code-based design guidelines featured in this book allow for demonstrated applications to immediately be implemented in the real world. Covered codes and design guidelines include ACI 440, ASCE Structural Plastics Design Manual, EUROCOMP Design Code, AASHTO Specifications, and manufacturer-published design guides. Procedures are provided to the structural designer on how to use this combination of code-like documents to design with FRP profiles. In four convenient sections, Composites for Construction covers: * An introduction to FRP applications, products and properties, and to the methods of obtaining the characteristic properties of FRP materials for use in structural design * The design of concrete structural members reinforced with FRP reinforcing bars * Design of FRP strengthening systems such as strips, sheets, and fabrics for upgrading the strength and ductility of reinforced concrete structural members * The design of trusses and frames made entirely of FRP structural profiles produced by the pultrusion process
Book Synopsis Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05) by : ACI Committee 318
Download or read book Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05) written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Reinforced Concrete Design by : William Henry Mosley
Download or read book Reinforced Concrete Design written by William Henry Mosley and published by . This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Design of High Strength Steel Reinforced Concrete Columns by : Sing-Ping Chiew
Download or read book Design of High Strength Steel Reinforced Concrete Columns written by Sing-Ping Chiew and published by CRC Press. This book was released on 2018-04-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials – columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volume provides detailed worked examples on use of these high strength materials. This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.
Book Synopsis Design Examples for High Strength Steel Reinforced Concrete Columns by : Sing-Ping Chiew
Download or read book Design Examples for High Strength Steel Reinforced Concrete Columns written by Sing-Ping Chiew and published by CRC Press. This book was released on 2018-04-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the companion volume to Design of High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. This book provides a large number of worked examples for the design of high strength steel reinforced concrete (SRC) columns. It is based on the Eurocode 4 approach, but goes beyond this to give much needed guidance on the narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete. Special considerations are given to resistance calculations that maximize the full strength of the materials, with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. These examples build on the design principles set out in the companion volume, allowing the readers to practice and understand the EC4 methodology easily. Structural engineers and designers who are familiar with basic EC4 design should find these design examples particularly helpful, whilst engineering undergraduate and graduate students who are studying composite steel concrete design and construction should easily gain further understanding from working through the worked examples which are set out in a step-by-step clearly fashion.
