Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Quantitative Scanning Transmission Electron Microscopy Of Thick Samples And Of Gold And Silver Nanoparticles On Polymeric Surfaces
Download Quantitative Scanning Transmission Electron Microscopy Of Thick Samples And Of Gold And Silver Nanoparticles On Polymeric Surfaces full books in PDF, epub, and Kindle. Read online Quantitative Scanning Transmission Electron Microscopy Of Thick Samples And Of Gold And Silver Nanoparticles On Polymeric Surfaces ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Quantitative Scanning Transmission Electron Microscopy of Thick Samples and of Gold and Silver Nanoparticles on Polymeric Surfaces by : Aniruddha Dutta
Download or read book Quantitative Scanning Transmission Electron Microscopy of Thick Samples and of Gold and Silver Nanoparticles on Polymeric Surfaces written by Aniruddha Dutta and published by . This book was released on 2014 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition, the wedge-shaped FIB samples were used for studying the HAADF-STEM contrasts at an interface of a high- and a low-density material. The use of thick samples reveals an increased signal at the interfaces of high- and low-density materials. This effect can be explained by the transfer of scattered electrons from the high density material across the interface into the less-absorbing low-density material. A ballistic scattering model is proposed here for the HAADF-STEM contrasts at interfaces of thick materials using Python. The simulated HAADF-STEM signal is compared with experimental data to showcase the above phenomenon. A detailed understanding of the atomic number contrast in thick samples is developed based on the combination of experimental quantitative HAADF-STEM and simulated scattering. This approach is used to describe the observed features for Ag deposition on SU8 polymers.
Book Synopsis Scanning Transmission Electron Microscopy by : Alina Bruma
Download or read book Scanning Transmission Electron Microscopy written by Alina Bruma and published by CRC Press. This book was released on 2020-12-22 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Transmission Electron Microscopy: Advanced Characterization Methods for Materials Science Applications The information comprised in this book is focused on discussing the latest approaches in the recording of high-fidelity quantitative annular dark-field (ADF) data. It showcases the application of machine learning in electron microscopy and the latest advancements in image processing and data interpretation for materials notoriously difficult to analyze using scanning transmission electron microscopy (STEM). It also highlights strategies to record and interpret large electron diffraction datasets for the analysis of nanostructures. This book: Discusses existing approaches for experimental design in the recording of high-fidelity quantitative ADF data Presents the most common types of scintillator-photomultiplier ADF detectors, along with their strengths and weaknesses. Proposes strategies to minimize the introduction of errors from these detectors and avenues for dealing with residual errors Discusses the practice of reliable multiframe imaging, along with the benefits and new experimental opportunities it presents in electron dose or dose-rate management Focuses on supervised and unsupervised machine learning for electron microscopy Discusses open data formats, community-driven software, and data repositories Proposes methods to process information at both global and local scales, and discusses avenues to improve the storage, transfer, analysis, and interpretation of multidimensional datasets Provides the spectrum of possibilities to study materials at the resolution limit by means of new developments in instrumentation Recommends methods for quantitative structural characterization of sensitive nanomaterials using electron diffraction techniques and describes strategies to collect electron diffraction patterns for such materials This book helps academics, researchers, and industry professionals in materials science, chemistry, physics, and related fields to understand and apply computer-science–derived analysis methods to solve problems regarding data analysis and interpretation of materials properties.
Book Synopsis Direct Measurement of Thicknesses, Volumes Or Compositions of Nanomaterials by Quantitative Atomic Number Contrast in High-angle Annular Dark-field Scanning Transmission Electron Microscopy by : Biao Yuan
Download or read book Direct Measurement of Thicknesses, Volumes Or Compositions of Nanomaterials by Quantitative Atomic Number Contrast in High-angle Annular Dark-field Scanning Transmission Electron Microscopy written by Biao Yuan and published by . This book was released on 2012 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sizes, shapes, volumes and compositions of nanoparticles are very important parameters determining many of their properties. Efforts to measure these parameters for individual nanoparticles and to obtain reliable statistics for a large number of nanoparticles require a fast and reliable method for 3-D characterization. In this dissertation, a direct measurement method for thicknesses, volumes or compositions of nanomaterials by quantitative atomic number contrast in High-Angle Annular Dark-Field (HAADF) Scanning Transmission Electron Microscopy (STEM) is presented. A HAADF detector collects electrons scattered incoherently to high angles. The HAADF signal intensity is in first-order approximation proportional to the sample thickness and increases with atomic number. However, for larger sample thicknesses this approach fails. A simple description for the thickness dependence of the HAADF-STEM contrast has been developed in this dissertation. A new method for the calibration of the sensitivity of the HAADF detector for a FEI F30 transmission electron microscope (TEM) is developed in this dissertation. A nearly linear relationship of the HAADF signal with the electron current is confirmed. Cross sections of multilayered samples provided by TriQuint Semiconductors in Apopka, FL, for contrast calibration were obtained by focused ion-beam (FIB) preparation yielding data on the interaction cross section per atom. To obtain an absolute intensity calibration of the HAADF-STEM intensity, Convergent Beam Electron Diffraction (CBED) was performed on Si single crystals. However, for samples prepared by the focused ion beam technique, CBED often significantly underestimates the sample thickness. Multislice simulations from Dr. Kirkland's C codes are used for comparison with experimental results. TEM offers high lateral resolution, but contains little or no information on the thickness of samples. Thickness maps in energy-filtered TEM (EFTEM), CBED and tilt series are so far the only methods to determine thicknesses of particles in TEM. In this work I have introduced the use of wedge-shaped multilayer samples prepared by FIB for the calibration of HAADF-STEM contrasts. This method yields quantitative contrast data as a function of sample thickness. A database with several pure elements and compounds has been compiled, containing experimental data on the fraction of electrons scattered onto the HAADF detector for each nanometer of sample thickness. The use of thick samples reveals an increased signal at the interfaces of high- and low-density materials. This effect can be explained by the transfer of scattered electrons from the high density material across the interface into the less-absorbing low-density material. The calibrations were used to determine concentration gradients in nanoscale Fe-Pt multilayers as well as thicknesses and volumes of individual Au-Fe, Pt, and Ag nanoparticles. Volumes of nanoparticles with known composition can be determined with accuracy better than 15%. Porosity determination of materials becomes available with this method as shown in an example of porous Silicon.
Book Synopsis Scanning Transmission Electron Microscopy Of Nanomaterials: Basics Of Imaging And Analysis by : Nobuo Tanaka
Download or read book Scanning Transmission Electron Microscopy Of Nanomaterials: Basics Of Imaging And Analysis written by Nobuo Tanaka and published by World Scientific. This book was released on 2014-08-21 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basics, present status and future prospects of high-resolution scanning transmission electron microscopy (STEM) are described in the form of a textbook for advanced undergraduates and graduate students. This volume covers recent achievements in the field of STEM obtained with advanced technologies such as spherical aberration correction, monochromator, high-sensitivity electron energy loss spectroscopy and the software of image mapping. The future prospects chapter also deals with z-slice imaging and confocal STEM for 3D analysis of nanostructured materials.
Book Synopsis Impact of Electron and Scanning Probe Microscopy on Materials Research by : David G. Rickerby
Download or read book Impact of Electron and Scanning Probe Microscopy on Materials Research written by David G. Rickerby and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute provided an opportunity for researchers in universities, industry and National and International Laboratories, from the disciplines ofmaterials science, physics, chemistry and engineering to meet together in an assessment of the impact of electron and scanning probe microscopy on advanced material research. Since these researchers have traditionally relied upon different approaches, due to their different scientific background, to advanced materials problem solving, presentations and discussion within the Institute sessions were initially devoted to developing a set ofmutually understood basic concepts, inherently related to different techniques ofcharacterization by microscopy and spectroscopy. Particular importance was placed on Electron Energy Loss Spectroscopy (EELS), Scanning Probe Microscopy (SPM), High Resolution Transmission and Scanning Electron Microscopy (HRTEM, HRSTEM) and Environmental Scanning Electron Microscopy (ESEM). It was recognized that the electronic structure derived directly from EELS analysis as well as from atomic positions in HRTEM or High Angle Annular Dark Field STEM can be used to understand the macroscopic behaviour of materials. The emphasis, however, was upon the analysis of the electronic band structure of grain boundaries, fundamental for the understanding of macroscopic quantities such as strength, cohesion, plasticity, etc.
Book Synopsis Scanning Microscopy for Nanotechnology by : Weilie Zhou
Download or read book Scanning Microscopy for Nanotechnology written by Weilie Zhou and published by Springer Science & Business Media. This book was released on 2007-03-09 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents scanning electron microscopy (SEM) fundamentals and applications for nanotechnology. It includes integrated fabrication techniques using the SEM, such as e-beam and FIB, and it covers in-situ nanomanipulation of materials. The book is written by international experts from the top nano-research groups that specialize in nanomaterials characterization. The book will appeal to nanomaterials researchers, and to SEM development specialists.
Book Synopsis Quantitative Scanning Transmission Electron Microscopy of Electronic and Nanostructured Materials by :
Download or read book Quantitative Scanning Transmission Electron Microscopy of Electronic and Nanostructured Materials written by and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic and nanostructured materials have been investigated using advanced scanning transmission electron microscopy (STEM) techniques. The first topic is the microstructure of Ga and Sb-doped ZnO. Ga-doped ZnO is a candidate transparent conducting oxide material. The microstructure of GZO thin films grown by MBE under different growth conditions and different substrates were examined using various electron microscopy (EM) techniques. The microstructure, prevalent defects, and polarity in these films strongly depend on the growth conditions and substrate. Sb-doped ZnO nanowires have been shown to be the first route to stable p-type ZnO. Using Z-contrast STEM, I have showed that an unusual microstructure of Sb-decorated head-to-head inversion domain boundaries and internal voids contain all the Sb in the nanowires and cause the p-type conduction. InGaN thin films and InGaN / GaN quantum wells (QW) for light emitting diodes are the second topic. Low-dose Z-contrast STEM, PACBED, and EDS on InGaN QW LED structures grown by MOCVD show no evidence for nanoscale composition variations, contradicting previous reports. In addition, a new extended defect in GaN and InGaN was discovered. The defect consists of a faceted pyramid-shaped void that produces a threading dislocation along the [0001] growth direction, and is likely caused by carbon contamination during growth. Non-rigid registration (NRR) and high-precision STEM of nanoparticles is the final topic. NRR is a new image processing technique that corrects distortions arising from the serial nature of STEM acquisition that previously limited the precision of locating atomic columns and counting the number of atoms in images. NRR was used to demonstrate sub-picometer precision in STEM images of single crystal Si and GaN, the best achieved in EM. NRR was used to measure the atomic surface structure of Pt nanoacatalysts and Au nanoparticles, which revealed new bond length variation phenomenon of surface atoms. In adition, NRR allowed for measuring the 3D atomic structure of the nanoparticles with less than 1 atom uncertainty, a long-standing problem in EM. Finally, NRR was adapted to EDS spectrum images, significantly enhancing the signal to noise ratio and resolution of an EDS spectrum image of Ca-doped NdTiO3 compared to conventional methods.
Book Synopsis Advanced Electron Microscopy and Nanomaterials by : Arturo Ponce
Download or read book Advanced Electron Microscopy and Nanomaterials written by Arturo Ponce and published by Trans Tech Publications Ltd. This book was released on 2010-03-02 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the First Joint Advanced Electron Microscopy School for Nanomaterials and the Workshop on Nanomaterials (AEM-NANOMAT’09), Saltillo (Coahuila) México, September 29th-October 2nd, 2009
Book Synopsis Scanning Probe Microscopy in Nanoscience and Nanotechnology 2 by : Bharat Bhushan
Download or read book Scanning Probe Microscopy in Nanoscience and Nanotechnology 2 written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-12-17 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical and technical foundation of the state of the art in applied scanning probe techniques. It constitutes a timely and comprehensive overview of SPM applications. The chapters in this volume relate to scanning probe microscopy techniques, characterization of various materials and structures and typical industrial applications, including topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. The chapters are written by leading researchers and application scientists from all over the world and from various industries to provide a broader perspective.
Book Synopsis Progress in Transmission Electron Microscopy 2 by : Xiao-Feng Zhang
Download or read book Progress in Transmission Electron Microscopy 2 written by Xiao-Feng Zhang and published by Springer Science & Business Media. This book was released on 2001-10-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission electron microscopy (TEM) is now recognized as a crucial tool in materials science. This book, authored by a team of expert Chinese and international authors, covers many aspects of modern electron microscopy, from the architecture of novel electron microscopes, advanced theories and techniques in TEM and sample preparation, to a variety of hands-on examples of TEM applications. Volume 2 illustrates the important role that TEM is playing in the development and characterization of advanced materials, including nanostructures, interfacial structures, defects, and macromolecular complexes.
Book Synopsis Nanometrology Using the Transmission Electron Microscope by : Vlad Stolojan
Download or read book Nanometrology Using the Transmission Electron Microscope written by Vlad Stolojan and published by Morgan & Claypool Publishers. This book was released on 2015-10-12 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Transmission Electron Microscope (TEM) is the ultimate tool to see and measure structures on the nanoscale and to probe their elemental composition and electronic structure with sub-nanometer spatial resolution. Recent technological breakthroughs have revolutionized our understanding of materials via use of the TEM, and it promises to become a significant tool in understanding biological and biomolecular systems such as viruses and DNA molecules. This book is a practical guide for scientists who need to use the TEM as a tool to answer questions about physical and chemical phenomena on the nanoscale.
Book Synopsis Quantitative Scanning Transmission Electron Microscopy by : James Michael LeBeau
Download or read book Quantitative Scanning Transmission Electron Microscopy written by James Michael LeBeau and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic resolution electron microscopy ranks as one of the most important characterization methods in materials science. Example applications range from investigating single defects to determining detailed interface reconstructions. In recent years, high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) has become the technique of choice because the image intensities are considered to be intuitively interpretable and depend sensitively upon the atomic species present. The combination of experiment with electron scattering theory would thus enable the extraction of chemical information directly from the images without the need for calibration standards. However, theoretical predictions of contrast in atomic resolution electron microscopy images have never agreed quantitatively with experiments, raising questions as to whether the current understanding of image formation in the electron microscope is adequate.
Book Synopsis Quantitative Scanning Transmission Electron Microscopy of Point Defects in Crystals by : Jie Feng
Download or read book Quantitative Scanning Transmission Electron Microscopy of Point Defects in Crystals written by Jie Feng and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional characterization of defects is an essential step in the engineering of point defects to control the type, concentration, and spatial distribution of defects with nanometer-scale resolution to design materials with new functions and properties. High-resolution electron microscopy is becoming a general-purpose tool for characterizing several point defects with single-defect sensitivity and sub-unit cell spatial resolution in all three dimensions. Detectable defects include substitutional impurities, interstitial impurities, self-interstitials, and impurity-containing defect complexes. However, all the defects so far imaged at the single-defect level often increase the local electron scattering by 50% or more, and 3D imaging of defects that change column intensity less than 10%, such as single vacancies was only reported very recently. In the first part of this thesis, we demonstrated an approach for three-dimensional imaging of single vacancies using high precision quantitative high-angle annular dark-field Z-contrast scanning transmission electron microscopy. Vacancies are identified by both the reduction in scattered intensity created by the missing atom and the distortion of the surrounding atom positions. Vacancy positions are determined laterally to a unique lattice site in the image and in depth to within one of two lattice sites by dynamical diffraction effects. 35 single La vacancies are identified in images of a LaMnO3 thin film sample. The vacancies are randomly distributed in depth and correspond to a La vacancy concentration of 0.79%, which is consistent with the level of control of cation stoichiometry within our synthesis process (~1%) and with the equilibrium concentration of La vacancies under the film growth conditions. This method can be extended to detect other defects including impurities and defect clusters and these results represent a step forward in characterizing point defects in materials one at a time, at atomic resolution, matching our current capabilities in materials simulation and our growing control over defect distributions in synthesis. In the second parts of this thesis, I adapted the cut-edge Poisson denoising and machine learning algorithm into the four-dimensional STEM, which could potentially detect point defects that are undetectable by traditional STEM. We demonstrate that the iterative BM4D Poisson denoising algorithm could recover most of the image features corrupted by Poisson noise and increase the PSNR most. We also demonstrate that the convolutional neural network (VGG-16), trained on simulated PACBED data set, could accurately predict TEM sample thickness with> 99% accuracy within 100 nm with 2 nm thickness step.
Book Synopsis Quantitative Scanning Transmission Electron Microscopy Characterisation of Size-selected Gold Clusters by : Dongsheng He
Download or read book Quantitative Scanning Transmission Electron Microscopy Characterisation of Size-selected Gold Clusters written by Dongsheng He and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Transmission Electron Microscopy of Semiconductor Nanostructures by : Andreas Rosenauer
Download or read book Transmission Electron Microscopy of Semiconductor Nanostructures written by Andreas Rosenauer and published by Springer. This book was released on 2003-07-03 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tools well suited for the quantitative investigation of semiconductor electron microscopy. These tools allow for the accurate determination of the composition of ternary semiconductor nanostructures with a spatial resolution at near atomic scales. The book focuses on new methods including strain state analysis as well as evaluation of the composition via the lattice fringe analysis (CELFA) technique. The basics of these procedures as well as their advantages, drawbacks and sources of error are all discussed. The techniques are applied to quantum wells and dots in order to give insight into kinetic growth effects such as segregation and migration. In the first part of the book the fundamentals of transmission electron microscopy are provided. These are needed for an understanding of the digital image analysis techniques described in the second part of the book. There the reader will find information on different methods of composition determination. The third part of the book focuses on applications such as composition determination in InGaAs Stranski--Krastanov quantum dots. Finally it is shown how an improvement in the precision of the composition evaluation can be obtained by combining CELFA with electron holography. This is demonstrated for an AlAs/GaAs superlattice.
Book Synopsis Transmission Electron Microscopy Characterization of Nanomaterials by : Challa S.S.R. Kumar
Download or read book Transmission Electron Microscopy Characterization of Nanomaterials written by Challa S.S.R. Kumar and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third volume of a 40volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Transmission electron microscopy characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Book Synopsis Progress in Nanoscale Characterization and Manipulation by : Rongming Wang
Download or read book Progress in Nanoscale Characterization and Manipulation written by Rongming Wang and published by Springer. This book was released on 2018-08-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on charged-particle optics and microscopy, as well as their applications in the materials sciences. Presenting a range of cutting-edge theoretical and methodological advances in electron microscopy and microanalysis, and examining their crucial roles in modern materials research, it offers a unique resource for all researchers who work in ultramicroscopy and/or materials research. The book addresses the growing opportunities in this field and introduces readers to the state of the art in charged-particle microscopy techniques. It showcases recent advances in scanning electron microscopy, transmission electron microscopy and helium ion microscopy, including advanced spectroscopy, spherical-corrected microscopy, focused-ion imaging and in-situ microscopy. Covering these and other essential topics, the book is intended to facilitate the development of microscopy techniques, inspire young researchers, and make a valuable contribution to the field.
