Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Oh Planar Laser Induced Fluorescence Plif Measurements For The Study Of High Pressure Flames An Evaluation Of A New Laser And A New Camera System
Download Oh Planar Laser Induced Fluorescence Plif Measurements For The Study Of High Pressure Flames An Evaluation Of A New Laser And A New Camera System full books in PDF, epub, and Kindle. Read online Oh Planar Laser Induced Fluorescence Plif Measurements For The Study Of High Pressure Flames An Evaluation Of A New Laser And A New Camera System ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis OH planar laser induced fluorescence (PLIF) measurements for the study of high pressure flames by : Sarah Tedder
Download or read book OH planar laser induced fluorescence (PLIF) measurements for the study of high pressure flames written by Sarah Tedder and published by . This book was released on 2012 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Oh Planar Laser Induced Fluorescence Measurements for the Study of High Pressure Flames by : Nasa Technical Reports Server (Ntrs)
Download or read book Oh Planar Laser Induced Fluorescence Measurements for the Study of High Pressure Flames written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planar laser induced fluorescence (PLIF) is used by the Combustion Branch at the NASA Glenn Research Center (NASA Glenn) to assess the characteristics of the flowfield produced by aircraft fuel injectors. To improve and expand the capabilities of the PLIF system new equipment was installed. The new capabilities of the modified PLIF system are assessed by collecting OH PLIF in a methane/air flame produced by a flat flame burner. Specifically, the modifications characterized are the addition of an injection seeder to a Nd: YAG laser pumping an optical parametric oscillator (OPO) and the use of a new camera with an interline CCD. OH fluorescence results using the injection seeded OPO laser are compared to results using a Nd: YAG pumped dye laser with ultraviolet extender (UVX). Best settings of the new camera for maximum detection of PLIF signal are reported for the controller gain and microchannel plate (MCP) bracket pulsing. Results are also reported from tests of the Dual Image Feature (DIF) mode of the new camera which allows image pairs to be acquired in rapid succession. This allows acquisition of a PLIF image and a background signal almost simultaneously. Saturation effects in the new camera were also investigated and are reporte
Author :National Aeronautics and Space Adm Nasa Publisher :Independently Published ISBN 13 :9781794369306 Total Pages :24 pages Book Rating :4.3/5 (693 download)
Book Synopsis Oh Planar Laser Induced Fluorescence (Plif) Measurements for the Study of High Pressure Flames: An Evaluation of a New Laser and a New Camera System by : National Aeronautics and Space Adm Nasa
Download or read book Oh Planar Laser Induced Fluorescence (Plif) Measurements for the Study of High Pressure Flames: An Evaluation of a New Laser and a New Camera System written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2019-01-19 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planar laser induced fluorescence (PLIF) is used by the Combustion Branch at the NASA Glenn Research Center (NASA Glenn) to assess the characteristics of the flowfield produced by aircraft fuel injectors. To improve and expand the capabilities of the PLIF system new equipment was installed. The new capabilities of the modified PLIF system are assessed by collecting OH PLIF in a methane/air flame produced by a flat flame burner. Specifically, the modifications characterized are the addition of an injection seeder to a Nd: YAG laser pumping an optical parametric oscillator (OPO) and the use of a new camera with an interline CCD. OH fluorescence results using the injection seeded OPO laser are compared to results using a Nd: YAG pumped dye laser with ultraviolet extender (UVX). Best settings of the new camera for maximum detection of PLIF signal are reported for the controller gain and microchannel plate (MCP) bracket pulsing. Results are also reported from tests of the Dual Image Feature (DIF) mode of the new camera which allows image pairs to be acquired in rapid succession. This allows acquisition of a PLIF image and a background signal almost simultaneously. Saturation effects in the new camera were also investigated and are reported. Tedder, Sarah and Hicks, Yolanda Glenn Research Center NASA/TM-2012-217614, E-182
Book Synopsis OH Planar Laser Induced Fluorescence (PLIF) Measurements for the Study of High Pressure Flames :. by : Sarah Tedder
Download or read book OH Planar Laser Induced Fluorescence (PLIF) Measurements for the Study of High Pressure Flames :. written by Sarah Tedder and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Strategies for Planar Laser-induced Fluorescence Thermometry in Shock Tube Flows by : Ji Hyung Yoo
Download or read book Strategies for Planar Laser-induced Fluorescence Thermometry in Shock Tube Flows written by Ji Hyung Yoo and published by Stanford University. This book was released on 2011 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis was motivated by the need to better understand the temperature distribution in shock tube flows, especially in the near-wall flow regions. Two main ideas in planar laser-induced fluorescence (PLIF) diagnostics are explored in this thesis. The first topic is the development of a single-shot PLIF diagnostic technique for quantitative temperature distribution measurement in shock tube flow fields. PLIF is a non-intrusive, laser-based diagnostic technique capable of instantaneously imaging key flow features, such as temperature, pressure, density, and species concentration, by measuring fluorescence signal intensity from laser-excited tracer species. This study performed a comprehensive comparison of florescence tracers and excitation wavelengths to determine the optimal combination for PLIF imaging in shock tube flow applications. Excitation of toluene at 248nm wavelength was determined to be the optimal strategy due to the resulting high temperature sensitivity and fluorescence signal level, compared to other ketone and aromatic tracers at other excitation wavelengths. Sub-atmospheric toluene fluorescence yield data was measured to augment the existing photophysical data necessary for this diagnostic technique. In addition, a new imaging test section was built to allow PLIF imaging in all regions of the shock tube test section, including immediately adjacent to the side and end walls. The signal-to-noise (SNR) and spatial resolution of the PLIF images were optimized using statistical analysis. Temperature field measurements were made with the PLIF diagnostic technique across normal incident and reflected shocks in the shock tube core flow. The resulting images show uniform spatial distribution, and good agreement with conditions calculated from the normal shock jump equations. Temperature measurement uncertainty is about 3.6% at 800K. The diagnostic was also applied to image flow over a wedge. The resulting images capture all the flow features predicted by numerical simulations. The second topic is the development of a quantitative near-wall diagnostic using tracer-based PLIF imaging. Side wall thermal boundary layers and end wall thermal layers are imaged to study the temperature distribution present under constant pressure conditions. The diagnostic technique validated in the shock tube core flow region was further optimized to improve near-wall image quality. The optimization process considered various wall materials, laser sheet orientations, camera collection angles, and optical components to find the configuration that provides the best images. The resulting images have increased resolution (15[Mu]m) and are able to resolve very thin non-uniform near-wall temperature layers (down to 60[Mu]m from the surface). The temperature field and thickness measurements of near-wall shock tube flows under various shock conditions and test gases showed good agreement with boundary layer theory. To conclude this thesis, new applications and future improvements to the developed PLIF diagnostic technique are discussed. These suggested refinements can provide an even more robust and versatile PLIF imaging technique capable of measuring a wider range of flow conditions near walls.
Book Synopsis International Aerospace Abstracts by :
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis AIAA Journal by : American Institute of Aeronautics and Astronautics
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 1996 with total page 1364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Turbulent Premixed Flames by : Nedunchezhian Swaminathan
Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Book Synopsis Combustion Theory by : Forman A. Williams
Download or read book Combustion Theory written by Forman A. Williams and published by CRC Press. This book was released on 2018-03-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Theory delves deeper into the science of combustion than most other texts and gives insight into combustions from a molecular and a continuum point of view. The book presents derivations of the basic equations of combustion theory and contains appendices on the background of subjects of thermodynamics, chemical kinetics, fluid dynamics, and transport processes. Diffusion flames, reactions in flows with negligible transport and the theory of pre-mixed flames are treated, as are detonation phenomena, the combustion of solid propellents, and ignition, extinction, and flamibility pehnomena.
Book Synopsis Combustion Measurements by : Norman Chigier
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 1991-04-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Book Synopsis Planar Laser Induced Fluorescence System for High Pressure Combustion Facility by :
Download or read book Planar Laser Induced Fluorescence System for High Pressure Combustion Facility written by and published by . This book was released on 1999 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report covers the expenditure of DURIP grant for the design fabrication and assembly of a state-of-the-art planar laser-induced fluorescent (PLIF) instrumentation system. The equipment will be used to acquire time-accurate and spatially resolved species concentrations of OH and NO in a combustor test rig operating at flow rates as high as 1 kgm/s and up to four atmospheres. Successful initial results have been obtained for methane-air flames at atmospheric pressure. This apparatus forms a significant addition to the Caltech program of research in combustion instabilities and applications of active control to combustor dynamics.
Book Synopsis Laser Technology and its Applications by : Yufei Ma
Download or read book Laser Technology and its Applications written by Yufei Ma and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser has become more and more important in scientific research and industrial applications. Now, the laser wavelength can cover the range from ultraviolet to terahertz and output laser performance has significantly progressed in recent years. This book is focused on the advanced diode laser, fiber laser, and their applications in laser ablation, laser-introduced fluorescence, and laser treatment. The advantages of laser technology are shown comprehensively.
Book Synopsis Strategies for Planar Laser-induced Fluorescence Thermometry in Shock Tube Flows by : Ji Hyung Yoo
Download or read book Strategies for Planar Laser-induced Fluorescence Thermometry in Shock Tube Flows written by Ji Hyung Yoo and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis was motivated by the need to better understand the temperature distribution in shock tube flows, especially in the near-wall flow regions. Two main ideas in planar laser-induced fluorescence (PLIF) diagnostics are explored in this thesis. The first topic is the development of a single-shot PLIF diagnostic technique for quantitative temperature distribution measurement in shock tube flow fields. PLIF is a non-intrusive, laser-based diagnostic technique capable of instantaneously imaging key flow features, such as temperature, pressure, density, and species concentration, by measuring fluorescence signal intensity from laser-excited tracer species. This study performed a comprehensive comparison of florescence tracers and excitation wavelengths to determine the optimal combination for PLIF imaging in shock tube flow applications. Excitation of toluene at 248nm wavelength was determined to be the optimal strategy due to the resulting high temperature sensitivity and fluorescence signal level, compared to other ketone and aromatic tracers at other excitation wavelengths. Sub-atmospheric toluene fluorescence yield data was measured to augment the existing photophysical data necessary for this diagnostic technique. In addition, a new imaging test section was built to allow PLIF imaging in all regions of the shock tube test section, including immediately adjacent to the side and end walls. The signal-to-noise (SNR) and spatial resolution of the PLIF images were optimized using statistical analysis. Temperature field measurements were made with the PLIF diagnostic technique across normal incident and reflected shocks in the shock tube core flow. The resulting images show uniform spatial distribution, and good agreement with conditions calculated from the normal shock jump equations. Temperature measurement uncertainty is about 3.6% at 800K. The diagnostic was also applied to image flow over a wedge. The resulting images capture all the flow features predicted by numerical simulations. The second topic is the development of a quantitative near-wall diagnostic using tracer-based PLIF imaging. Side wall thermal boundary layers and end wall thermal layers are imaged to study the temperature distribution present under constant pressure conditions. The diagnostic technique validated in the shock tube core flow region was further optimized to improve near-wall image quality. The optimization process considered various wall materials, laser sheet orientations, camera collection angles, and optical components to find the configuration that provides the best images. The resulting images have increased resolution (15[Mu]m) and are able to resolve very thin non-uniform near-wall temperature layers (down to 60[Mu]m from the surface). The temperature field and thickness measurements of near-wall shock tube flows under various shock conditions and test gases showed good agreement with boundary layer theory. To conclude this thesis, new applications and future improvements to the developed PLIF diagnostic technique are discussed. These suggested refinements can provide an even more robust and versatile PLIF imaging technique capable of measuring a wider range of flow conditions near walls.
Book Synopsis Recent Research Accomplishments of the Air Force Office of Scientific Research by : United States. Air Force. Office of Scientific Research
Download or read book Recent Research Accomplishments of the Air Force Office of Scientific Research written by United States. Air Force. Office of Scientific Research and published by . This book was released on 1989 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Laser Diagnostics for High Pressure Combustion by : David Escofet-Martin
Download or read book Laser Diagnostics for High Pressure Combustion written by David Escofet-Martin and published by . This book was released on 2017 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser diagnostics have been a staple for experimental combustion research as a modern tool to evaluate high temperature reacting flow environments and to contribute to the fundamental knowledge needed for improving our current combustion systems in a non-intrusive way; they also represent an essential tool for validating computational models. High pressure diagnostics are of particular importance due to the fact that the majority of practical combustion systems operate at high pressure, involving increased challenges in the measurements. The current work examines a variety of linear and non-linear light/matter interaction processes (Raman, fluorescence, and coherent anti-Stokes Raman spectroscopy or CARS) with the goal of measuring the temperature, pressure, and spatial distribution of important reacting flow species. The specific techniques involving OH planar laser induced fluorescence (PLIF), two-line OH PLIF thermometry, two-photon CO PLIF, nanosecond vibrational CARS and hybrid femtosecond/picosecond rotational CARS are all demonstrated at atmospheric pressure using a non-premixed coflow impinging jet as a study flame and examined in detail under high pressure conditions (up to 12 bar) as a coflow flame and in a calibration high pressure vessel; the implications of pressure are discussed in detail in the linear and non-linear techniques. The high pressure experimental data set shows soot laser induced incandescence (LII) as a source of interference for high pressure LIF in non-premixed flames, good agreement with 3 different chemical mechanisms, in particular at high pressure, between an OpenFOAM simulated fluorescence and the experimental pressure dependent data regarding both the spatial distribution of the OH molecule and the overall number of $OH$ molecules interacting with the excitation source. Chirp is identified as a critical parameter when using a second harmonic bandwidth compressor in the hybrid fs/ps CARS configuration, and the chirped CARS signal depends strongly on probe delay in N2 experiments. High quality high pressure data can be achieved once chirp influence has been quantified accurately. Together the combination of diagnostics studied provide insights into high pressure laser diagnostics challenges beyond what is currently available.
Book Synopsis Technical Literature Abstracts by : Society of Automotive Engineers
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 1998 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: