Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Numerical Analysis Of The Combustion Of Diesel Dimethyl Ether And Polyoxymethylene Dimethyl Ethers Omen N
Download Numerical Analysis Of The Combustion Of Diesel Dimethyl Ether And Polyoxymethylene Dimethyl Ethers Omen N full books in PDF, epub, and Kindle. Read online Numerical Analysis Of The Combustion Of Diesel Dimethyl Ether And Polyoxymethylene Dimethyl Ethers Omen N ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Polymer Matrix Composites and Technology by : Ru-Min Wang
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Book Synopsis Chemical Thermodynamics for Process Simulation by : Jürgen Gmehling
Download or read book Chemical Thermodynamics for Process Simulation written by Jürgen Gmehling and published by John Wiley & Sons. This book was released on 2019-06-10 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.
Author :Frédérique Battin-Leclerc Publisher :Springer Science & Business Media ISBN 13 :1447153073 Total Pages :657 pages Book Rating :4.4/5 (471 download)
Book Synopsis Cleaner Combustion by : Frédérique Battin-Leclerc
Download or read book Cleaner Combustion written by Frédérique Battin-Leclerc and published by Springer Science & Business Media. This book was released on 2013-09-06 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview compiles the on-going research in Europe to enlarge and deepen the understanding of the reaction mechanisms and pathways associated with the combustion of an increased range of fuels. Focus is given to the formation of a large number of hazardous minor pollutants and the inability of current combustion models to predict the formation of minor products such as alkenes, dienes, aromatics, aldehydes and soot nano-particles which have a deleterious impact on both the environment and on human health. Cleaner Combustion describes, at a fundamental level, the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, but also innovative surrogates, describing the complex chemistry of new environmentally important bio-fuels. Divided into five sections, a broad yet detailed coverage of related research is provided. Beginning with the development of detailed kinetic mechanisms, chapters go on to explore techniques to obtain reliable experimental data, soot and polycyclic aromatic hydrocarbons, mechanism reduction and uncertainty analysis, and elementary reactions. This comprehensive coverage of current research provides a solid foundation for researchers, managers, policy makers and industry operators working in or developing this innovative and globally relevant field.
Download or read book OntoCAPE written by Wolfgang Marquardt and published by Springer Science & Business Media. This book was released on 2009-12-16 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivation for this Book Ontologies have received increasing attention over the last two decades. Their roots can be traced back to the ancient philosophers, who were interested in a c- ceptualization of the world. In the more recent past, ontologies and ontological engineering have evolved in computer science, building on various roots such as logics, knowledge representation, information modeling and management, and (knowledge-based) information systems. Most recently, largely driven by the next generation internet, the so-called Semantic Web, ontological software engineering has developed into a scientific field of its own, which puts particular emphasis on the theoretical foundations of representation and reasoning, and on the methods and tools required for building ontology-based software applications in diverse domains. Though this field is largely dominated by computer science, close re- tionships have been established with its diverse areas of application, where - searchers are interested in exploiting the results of ontological software engine- ing, particularly to build large knowledge-intensive applications at high productivity and low maintenance effort. Consequently, a large number of scientific papers and monographs have been p- lished in the very recent past dealing with the theory and practice of ontological software engineering. So far, the majority of those books are dedicated to the th- retical foundations of ontologies, including philosophical treatises and their re- tionships to established methods in information systems and ontological software engineering.
Book Synopsis Soot in Combustion Systems and Its Toxic Properties by : J. Lahaye
Download or read book Soot in Combustion Systems and Its Toxic Properties written by J. Lahaye and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our interest in Mulhouse for carbon black and soot began some 30 years ago when J.B. Donnet developed the concept of surface chemistry of carbon and its involvement in interactions with gas, liquid and solid phases. In the late sixties, we began to study soot formation in pyrolytic systems and later on in flames. The idea of organ1z1ng a meeting on soot formation originated some four or five years ago, through discussions among Professor J.B. Howard, Dr. A. D'Alessio and ourselves. At that time the scientific community was becoming aware of the necessity to strictly control soot formation and emission. Being involved in the study of surface properties of carbon black as well as of formation of soot, we realized that the combustion community was not always fully aware of the progress made by the physical-chemists on carbon black. Reciprocally, the carbon specialists were often ignoring the research carried out on soot in flames. One objective of this workshop was to stimulate discussions between these two scientific communities. During the preparation of the meeting, and especially during the review process by the Material Science Committee of the Scientific Affairs Division of N.A.T.O. the toxicological aspect emerged as being an important component to be addressed during the workshop. To reflect these preoccupations we invited biologists, physical chemists and engineers, all leaders in their field. The final programme is a compromise of the different aspects of the subject and was divided in five sessions.
Book Synopsis Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion by :
Download or read book Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion written by and published by Elsevier. This book was released on 2019-06-07 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion, Volume 45, gives an overview of the different steps involved in the development and application of detailed kinetic mechanisms, mainly relating to pyrolysis and combustion processes. The book is divided into two parts that cover the chemistry and kinetic models and then the numerical and statistical methods. It offers a comprehensive coverage of the theory and tools needed, along with the steps necessary for practical and industrial applications.
Author :American Chemical Society. Division of Industrial and Engineering Chemistry Publisher : ISBN 13 : Total Pages :200 pages Book Rating :4.3/5 (91 download)
Book Synopsis Extractive and Azeotropic Distillation by : American Chemical Society. Division of Industrial and Engineering Chemistry
Download or read book Extractive and Azeotropic Distillation written by American Chemical Society. Division of Industrial and Engineering Chemistry and published by . This book was released on 1972 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Catalysis and Zeolites by : Jens Weitkamp
Download or read book Catalysis and Zeolites written by Jens Weitkamp and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeolites occur in nature and have been known for almost 250 years as alumino silicate minerals. Examples are clinoptilolite, mordenite, offretite, ferrierite, erionite and chabazite. Today, most of these and many other zeolites are of great interest in heterogeneous catalysis, yet their naturally occurring forms are of limited value as catalysts because nature has not optimized their properties for catalytic applications and the naturally occurring zeolites almost always contain undesired impurity phases. It was only with the advent of synthetic zeolites in the period from about 1948 to 1959 (thanks to the pioneering work of R. M. Barrer and R. M. Milton) that this class of porous materials began to playa role in catalysis. A landmark event was the introduction of synthetic faujasites (zeolite X at first, zeolite Y slightly later) as catalysts in fluid catalytic cracking (FCC) of heavy petroleum distillates in 1962, one of the most important chemical processes with a worldwide capacity of the order of 500 million t/a. Compared to the previously used amorphous silica-alumina catalysts, the zeolites were not only orders of magnitude more active, which enabled drastic process engineering improvements to be made, but they also brought about a significant increase in the yield of the target product, viz. motor gasoline. With the huge FCC capacity worldwide, the added value of this yield enhancement is of the order of 10 billion US $ per year.
Book Synopsis Alternative Solvents for Green Chemistry by : Francesca Kerton
Download or read book Alternative Solvents for Green Chemistry written by Francesca Kerton and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everyone is becoming more environmentally conscious and therefore, chemical processes are being developed with their environmental burden in mind. This also means that more traditional chemical methods are being replaced with new innovations and this includes new solvents. Solvents are everywhere, but how necessary are they? They are used in most areas including synthetic chemistry, analytical chemistry, pharmaceutical production and processing, the food and flavour industry and the materials and coatings sectors. However, the principles of green chemistry guide us to use less of them, or to use safer, more environmentally friendly solvents if they are essential. Therefore, we should always ask ourselves, do we really need a solvent? Green chemistry, as a relatively new sub-discipline, is a rapidly growing field of research. Alternative solvents - including supercritical fluids and room temperature ionic liquids - form a significant portion of research in green chemistry. This is in part due to the hazards of many conventional solvents (e.g. toxicity and flammability) and the significant contribution that solvents make to the waste generated in many chemical processes. Solvents are important in analytical chemistry, product purification, extraction and separation technologies, and also in the modification of materials. Therefore, in order to make chemistry more sustainable in these fields, a knowledge of alternative, greener solvents is important. This book, which is part of a green chemistry series, uses examples that tie in with the 12 principles of green chemistry e.g. atom efficient reactions in benign solvents and processing of renewable chemicals/materials in green solvents. Readers get an overview of the many different kinds of solvents, written in such a way to make the book appropriate to newcomers to the field and prepare them for the 'green choices' available. The book also removes some of the mystique associated with 'alternative solvent' choices and includes information on solvents in different fields of chemistry such as analytical and materials chemistry in addition to catalysis and synthesis. The latest research developments, not covered elsewhere, are included such as switchable solvents and biosolvents. Also, some important areas that are often overlooked are described such as naturally sourced solvents (including ethanol and ethyl lactate) and liquid polymers (including poly(ethyleneglycol) and poly(dimethylsiloxane)). As well as these additional alternative solvents being included, the book takes a more general approach to solvents, not just focusing on the use of solvents in synthetic chemistry. Applications of solvents in areas such as analysis are overviewed in addition to the more widely recognised uses of alternative solvents in organic synthesis. Unfortunately, as the book shows, there is no universal green solvent and readers must ascertain their best options based on prior chemistry, cost, environmental benefits and other factors. It is important to try and minimize the number of solvent changes in a chemical process and therefore, the importance of solvents in product purification, extraction and separation technologies are highlighted. The book is aimed at newcomers to the field whether research students beginning investigations towards their thesis or industrial researchers curious to find out if an alternative solvent would be suitable in their work.
Book Synopsis Methanol: The Basic Chemical and Energy Feedstock of the Future by : Martin Bertau
Download or read book Methanol: The Basic Chemical and Energy Feedstock of the Future written by Martin Bertau and published by Springer Science & Business Media. This book was released on 2014-02-18 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol - The Chemical and Energy Feedstock of the Future offers a visionary yet unbiased view of methanol technology. Based on the groundbreaking 1986 publication "Methanol" by Friedrich Asinger, this book includes contributions by more than 40 experts from industry and academia. The authors and editors provide a comprehensive exposition of methanol chemistry and technology which is useful for a wide variety of scientists working in chemistry and energy related industries as well as academic researchers and even decision-makers and organisations concerned with the future of chemical and energy feedstocks.
Book Synopsis Casarett & Doull's Essentials of Toxicology by : CURTIS. WATKINS KLAASSEN (JOHN.)
Download or read book Casarett & Doull's Essentials of Toxicology written by CURTIS. WATKINS KLAASSEN (JOHN.) and published by . This book was released on 2015-09-16 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Coefficients for Calculating Thermodynamic and Transport Properties of Individual Species by : Bonnie J. McBride
Download or read book Coefficients for Calculating Thermodynamic and Transport Properties of Individual Species written by Bonnie J. McBride and published by . This book was released on 1993 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Fuels and Chemicals from Biomass by : Badal C. Saha
Download or read book Fuels and Chemicals from Biomass written by Badal C. Saha and published by . This book was released on 1997 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for a wide variety of biotechnologists, this book provides a major review of the state-of-the-art in bioethanol production technologies, enzymatic biomass conversion, and biodiesel. It also provides a detailed explanation of a breakthrough in photosynthetic water splitting which could result in a doubling of the efficiency of solar energy conversion by green plants. The book covers production of lactic acid, succinic acid, 1,3-propanediol, 2,3-butanediol, and polyhydroxybutyrate and xylitol. It also includes a chapter on synthesis-gas fermentation.
Book Synopsis Automotive Fuels Reference Book by : Paul Richards
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Book Synopsis Principles of Polarography by : Jaroslav Heyrovský
Download or read book Principles of Polarography written by Jaroslav Heyrovský and published by Elsevier. This book was released on 2013-09-11 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Polarography is a revised and extended version of an original Czech edition that appeared in 1962 at the Publishing House of the Czechoslovak Academy of Sciences in Prague. Based on a one-term course of lectures for third-year students of chemistry at the Charles University it brings the fundamental results of more than forty years' research in the field of polarography. The book contains 22 chapters and opens with a discussion of the principles of polarography. This is followed by separate chapters on polarizable electrodes used in polarography; charging current; influence of the resistance of the electrolyte on polarographic curves; migration and diffusion-controlled currents; and equation of a reversible polarographic wave. Subsequent chapters deal with reversible processes controlled by diffusion of complex ions; reversible reduction of organic substances; deposition of mercury ions; irreversible electrode processes; applications of limiting currents; polarographic curves for the formation of semiquinones and dimers; and catalytic hydrogen currents.
Book Synopsis Polyoxymethylene Handbook by : Sigrid Lüftl
Download or read book Polyoxymethylene Handbook written by Sigrid Lüftl and published by Wiley-Scrivener. This book was released on 2014-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent, unique, and up-to-date reference book on polyoxymethylene, its compounds, and nanocomposites, specifically dealing with synthesis, characterization, processing, morphology, and applications Polyoxymethylene Handbook: Structure, Properties, Applications, and Their Nanocomposites summarizes many of the state-of-the-art technological and research accomplishments in the area of polyoxymethylene (POM). It discusses in length the polymerization and manufacture of polyoxymethylene and various types of additives, as well as the structure and crystallization behavior of POM and its thermal, physical, mechanical, flame retardant, chemical, electrical, and optical properties. The environmental impact of POM is also addressed. The 15 chapters in the handbook are written by prominent researchers from industry, academia, and government/private research laboratories across the globe. Because so few books have ever been published on polyoxymethylene, the handbook is a very valuable reference tool that truly serves as a “one stop” resource for readers and users seeking solutions to both fundamental and applied problems.
Book Synopsis Low-Temperature Oxidation by : Francis P. Fehlner
Download or read book Low-Temperature Oxidation written by Francis P. Fehlner and published by Wiley-Interscience. This book was released on 1986 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: An interdisciplinary study of the corrosion of metals that emphasizes the role of oxide structure in interpreting oxidation kinetics of metals and semiconductors. Covers low temperature oxidation, silicon oxidation, structure of vitreous oxides, transport processes in vitreous oxides, and oxide films. Index.
