Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Nanostructure Formation And Thermal Stability Of Cu And Cu Based Alloys
Download Nanostructure Formation And Thermal Stability Of Cu And Cu Based Alloys full books in PDF, epub, and Kindle. Read online Nanostructure Formation And Thermal Stability Of Cu And Cu Based Alloys ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Nanostructure formation and thermal stability of Cu and Cu-based alloys by : Mohsen Samadi Khoshkhoo
Download or read book Nanostructure formation and thermal stability of Cu and Cu-based alloys written by Mohsen Samadi Khoshkhoo and published by Cuvillier Verlag. This book was released on 2015-01-12 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials are materials with grain size smaller than 100 nm. Due to the very small grain size, a large fraction of atoms belong to the grain-boundaries. As a result, their properties are significantly different compared to their coarse-grained counterparts. Generally, a considerable improvement in the properties is observed when the size is reduced to nanometer dimensions. These include high strength and hardness, improved ductility and toughness, as well as enhanced diffusivity, which make this category of materials of particular interest for a wide range of applications. The properties of nanocrystalline materials are strongly affected by their structure and defects density, which in turn are determined by the method of production. As a result, the knowledge of the mechanism of nanostructure formation is a prerequisite for the structure/property optimization.
Book Synopsis Handbook of Advanced Magnetic Materials by : Yi Liu
Download or read book Handbook of Advanced Magnetic Materials written by Yi Liu and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 1844 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 2002, the world's first commercial magnetic levitation super-train went into operation in Shanghai. The train is held just above the rails by magnetic levitation (maglev) and can travel at a speed of 400 km/hr, completing the 30km journey from the city to the airport in minutes. Now consumers are enjoying 50 GB hard drives compared to 0.5 GB hard drives ten years ago. Achievements in magnetic materials research have made dreams of a few decades ago reality. The objective of the four volume reference, Handbook of Advanced Magnetic Materials, is to provide a comprehensive review of recent progress in magnetic materials research. Each chapter will have an introduction to give a clear definition of basic and important concepts of the topic. The details of the topic are then elucidated theoretically and experimentally. New ideas for further advancement are then discussed. Sufficient references are also included for those who wish to read the original work. In the last decade, one of the most significant thrust areas of materials research has been nanostructured magnetic materials. There are several critical sizes that control the behavior of a magnetic material, and size effects become especially critical when dimensions approach a few nanometers, where quantum phenomena appear. The first volume of the book, Nanostructured Advanced Magnetic Materials, has therefore been devoted to the recent development of nanostructured magnetic materials, emphasizing size effects. Our understanding of magnetism has advanced with the establishment of the theory of atomic magnetic moments and itinerant magnetism. Simulation is a powerful tool for exploration and explanation of properties of various magnetic materials. Simulation also provides insight for further development of new materials. Naturally, before any simulation can be started, a model must be constructed. This requires that the material be well characterized. Therefore the second volume, Characterization and Simulation provides a comprehensive review of both experimental methods and simulation techniques for the characterization of magnetic materials. After an introduction, each section gives a detailed description of the method and the following sections provide examples and results of the method. Finally further development of the method will be discussed. The success of each type of magnetic material depends on its properties and cost which are directly related to its fabrication process. Processing of a material can be critical for development of artificial materials such as multilayer films, clusters, etc. Moreover, cost-effective processing usually determines whether a material can be commercialized. In recent years processing of materials has continuously evolved from improvement of traditional methods to more sophisticated and novel methods. The objective of the third volume, Processing of Advanced Magnetic Materials, is to provide a comprehensive review of recent developments in processing of advanced magnetic materials. Each chapter will have an introduction and a section to provide a detailed description of the processing method. The following sections give detailed descriptions of the processing, properties and applications of the relevant materials. Finally the potential and limitation of the processing method will be discussed. The properties of a magnetic material can be characterized by intrinsic properties such as anisotropy, saturation magnetization and extrinsic properties such as coercivity. The properties of a magnetic material can be affected by its chemical composition and processing route. With the continuous search for new materials and invention of new processing routes, magnetic properties of materials cover a wide spectrum of soft magnetic materials, hard magnetic materials, recording materials, sensor materials and others. The objective of the fourth volume, Properties and Applications of Advanced Magnetic Materials, is to provide a comprehensive review of recent development of various magnetic materials and their applications. Each chapter will have an introduction of the materials and the principles of their applications. The following sections give a detailed description of the processing, properties and applications. Finally the potential and limitation of the materials will be discussed.
Book Synopsis Handbook of Advanced Magnetic Materials by : David J. Sellmyer
Download or read book Handbook of Advanced Magnetic Materials written by David J. Sellmyer and published by 清华大学出版社有限公司. This book was released on 2005 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Ultrafine-Grained Materials by : Ruslan Z. Valiev
Download or read book Ultrafine-Grained Materials written by Ruslan Z. Valiev and published by Springer Nature. This book was released on with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Handbook of Non-Ferrous Metal Powders by : Oleg D Neikov
Download or read book Handbook of Non-Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2018-11-30 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Non-Ferrous Metal Powders: Technologies and Applications, Second Edition, provides information on the manufacture and use of powders of non-ferrous metals that has taken place for many years in the area previously known as Soviet Russia. It presents the huge amount of knowledge and experience that has built up over the last fifty years. Originally published in Russia by several prominent scientists, researchers and engineers, this presents an update to the first book that includes sections on classification, properties, treatment methods and production. This updated edition contains new content on the powders, along with newer methods of 3D printing. Covers the manufacturing methods, properties and importance of the following metals: aluminum, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth Includes new content on recent advances, such as additive manufacturing and 3D printing of non-ferrous metal alloys and specific powders for advanced techniques, including metal injection molding technologies Expands on topics such as safety engineering in the production of powders and advanced areas of engineering research, such as nanopowder processes
Book Synopsis Nanostructured Materials, 2nd Edition by : Carl C. Koch
Download or read book Nanostructured Materials, 2nd Edition written by Carl C. Koch and published by William Andrew. This book was released on 2006-12-01 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials are one of the highest profile classes of materials in science and engineering today, and will continue to be well into the future. Potential applications are widely varied, including washing machine sensors, drug delivery devices to combat avian flu, and more efficient solar panels. Broad and multidisciplinary, the field includes multilayer films, atomic clusters, nanocrystalline materials, and nanocomposites having remarkable variations in fundamental electrical, optic, and magnetic properties. Nanostructured Materials: Processing, Properties and Applications, 2nd Edition is an extensive update to the exceptional first edition snapshot of this rapidly advancing field. Retaining the organization of the first edition, Part 1 covers the important synthesis and processing methods for the production of nanocrystalline materials. Part 2 focuses on selected properties of nanostructured materials. Potential or existing applications are described as appropriate throughout the book. The second edition has been updated throughout for the latest advances and includes two additional chapters.
Book Synopsis Bulk Metallic Glasses by : C. Suryanarayana
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Book Synopsis Bulk Nanostructured Materials by : Michael J. Zehetbauer
Download or read book Bulk Nanostructured Materials written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2009-06-10 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing and mechanical behaviour of bulk nanostructured materials are one of the most interesting new fields of research on advanced materials systems. Many nanocrystalline materials possess very high strength with still good ductility, and exhibit high values of fatigue resistance and fracture toughness. There has been continuing interest in these nanomaterials for use in structural and biomedical applications, and this has led to a large number of research programs worldwide. This book focuses on the processing techniques, microstructures, mechanical and physical properties, and applications of bulk nanostructured materials, as well as related fundamental issues. Only since recently can such bulk nanostructured materials be produced in large bulk dimensions, which opens the door to their commercial applications.
Book Synopsis Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors by : Peter Švec
Download or read book Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors written by Peter Švec and published by Springer Science & Business Media. This book was released on with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Rapidly Quenched Materials by : H. Fredriksson
Download or read book Rapidly Quenched Materials written by H. Fredriksson and published by Elsevier. This book was released on 2012-12-02 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 327 papers in this two-volume set cover a wide range of topics concerning the production, processing and properties of rapidly quenched melts. Various techniques for the production of non-equilibrium materials are also discussed, including solid state amorphization by rapid interdiffusion and thermobaric quenching.
Book Synopsis Nanocatalysis by : Vivek Polshettiwar
Download or read book Nanocatalysis written by Vivek Polshettiwar and published by John Wiley & Sons. This book was released on 2013-09-06 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exhibiting both homogeneous and heterogeneous catalytic properties, nanocatalysts allow for rapid and selective chemical transformations, with the benefits of excellent product yield and ease of catalyst separation and recovery. This book reviews the catalytic performance and the synthesis and characterization of nanocatalysts, examining the current state of the art and pointing the way towards new avenues of research. Moreover, the authors discuss new and emerging applications of nanocatalysts and nanocatalysis, from pharmaceuticals to fine chemicals to renewable energy to biotransformations. Nanocatalysis features contributions from leading research groups around the world. These contributions reflect a thorough review of the current literature as well as the authors’ first-hand experience designing and synthesizing nanocatalysts and developing new applications for them. The book’s nineteen chapters offer a broad perspective, covering: Nanocatalysis for carbon-carbon and carbon-heteroatom coupling reactions Nanocatalysis for various organic transformations in fine chemical synthesis Nanocatalysis for oxidation, hydrogenation, and other related reactions Nanomaterial-based photocatalysis and biocatalysis Nanocatalysts to produce non-conventional energy such as hydrogen and biofuels Nanocatalysts and nano-biocatalysts in the chemical industry Readers will also learn about the latest spectroscopic and microscopy tools used in advanced characterization methods that shed new light on nanocatalysts and nanocatalysis. Moreover, the authors offer expert advice to help readers develop strategies to improve catalytic performance. Summarizing and reviewing all the most important advances in nanocatalysis over the last two decades, this book explains the many advantages of nanocatalysts over conventional homogeneous and heterogeneous catalysts, providing the information and guidance needed for designing green, sustainable catalytic processes.
Book Synopsis Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors by : Bogdan Idzikowski
Download or read book Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors written by Bogdan Idzikowski and published by Springer Science & Business Media. This book was released on 2005-07-18 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic (magnetic and non-magnetic) nanocrystalline materials have been known for over ten years but only recent developments in the research into those complex alloys and their metastable amorphous precursors have created a need to summarize the most important accomplishments in the field. This book is a collection of articles on various aspects of metallic nanocrystalline materials, and an attempt to address this above need. The main focus of the papers is put on the new issues that emerge in the studies of nanocrystalline materials, and, in particular, on (i) new compositions of the alloys, (ii) properties of conventional nanocrystalline materials, (iii) modeling and simulations, (iv) preparation methods, (v) experimental techniques of measurements, and (vi) different modern applications. Interesting phenomena of the physics of nanocrystalline materials are a consequence of the effects induced by the nanocrystalline structure. They include interface physics, the influence of the grain boundaries, the averaging of magnetic anisotropy by exchange interactions, the decrease in exchange length, and the existence of a minimum two-phase structure at the atomic scale. Attention is also paid to the special character of the local atomic ordering and to the corresponding interatomic bonding as well as to anomalies and particularities of electron density distributions, and to the formation of metastable, nanocrystalline (or quasi-crystalline) phases built from exceptionally small grains with special properties. Another important focus of attention are new classes of materials which are not based on new compositions, but rather on the original and special crystalline structure in the nanoscale.
Book Synopsis Melt-Quenched Nanocrystals by : A. M. Glezer
Download or read book Melt-Quenched Nanocrystals written by A. M. Glezer and published by CRC Press. This book was released on 2013-06-17 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Melt quenching-the method of quenching from the liquid state-provides new opportunities for producing advanced materials with a unique combination of properties. In the process of melt quenching, attainment of critical cooling rates can produce specific structural states of the material. Nanocrystalline materials produced by melt quenching are clas
Book Synopsis Entropy Based Fatigue, Fracture, Failure Prediction and Structural Health Monitoring by : Cemal Basaran
Download or read book Entropy Based Fatigue, Fracture, Failure Prediction and Structural Health Monitoring written by Cemal Basaran and published by MDPI. This book was released on 2021-01-13 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally fatigue, fracture, damage mechanics are predictions are based on empirical curve fitting models based on experimental data. However, when entropy is used as the metric for degradation of the material, the modeling process becomes physics based rather than empirical modeling. Because, entropy generation in a material can be calculated from the fundamental equation of thematerial. This collection of manuscripts is about using entropy for "Fatigue, Fracture, Failure Prediction and Structural Health Monitoring". The theoretical paper in the collection provides the mathematical and physics framework behind the unified mechanics theory, which unifies universal laws of motion of Newton and laws of thermodynamics at ab-initio level. Unified Mechanics introduces an additional axis called, Thermodynamic State Index axis which is linearly independent from Newtonian space x, y, z and time. As a result, derivative of displacement with respect to entropy is not zero, in unified mechanics theory, as in Newtonian mechanics. Any material is treated as a thermodynamic system and fundamental equation of the material is derived. Fundamental equation defines entropy generation rate in the system. Experimental papers in the collection prove validity of using entropy as a stable metric for Fatigue, Fracture, Failure Prediction and Structural Health Monitoring.
Book Synopsis Nanostructured Metals and Alloys by : S H Whang
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Book Synopsis International Aerospace Abstracts by :
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoporous Materials written by Qiang Xu and published by CRC Press. This book was released on 2013-01-04 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past two decades, the field of nanoporous materials has undergone significant developments. As these materials possess high specific surface areas, well-defined pore sizes, and functional sites, they show a great diversity of applications such as molecular adsorption/storage and separation, sensing, catalysis, energy storage and conversion, drug delivery, and more. Nanoporous Materials: Synthesis and Applications surveys the key developments in the synthesis of nanoporous materials in a broad range from soft porous materials—such as porous organic and metal-organic frameworks—to hard porous materials, such as porous metals and metal oxides, and the significant advances in their applications to date. Topics Include: Synthetic approaches, characterization techniques, and applications of a variety of meso- and microporous polymers and organic frameworks Advances in the synthetic control of structures along with the function exploration of this new class of organic porous materials Synthesis and applications of nanoporous metal-organic frameworks, mesoporous silica, and nanoporous glass Synthesis of mesoporous carbons by a soft- and hard-templating method and their applications for supercapacitors and membrane separations Fabrication of nanoporous semiconductor materials Structural modification and functional improvement of layered zeolites Germanates and related materials with open-frameworks
