Modelling Diesel Combustion

Download Modelling Diesel Combustion full books in PDF, epub, and Kindle. Read online Modelling Diesel Combustion ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Modelling Diesel Combustion

Author : P. A. Lakshminarayanan
Publisher : Springer Science & Business Media
ISBN 13 : 904813885X
Total Pages : 313 pages
Book Rating : 4.0/5 (481 download)

DOWNLOAD NOW!

Book Synopsis Modelling Diesel Combustion by : P. A. Lakshminarayanan

Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.

Modelling Diesel Combustion

Author : P. A. Lakshminarayanan
Publisher : Springer
ISBN 13 : 9789400731868
Total Pages : 305 pages
Book Rating : 4.7/5 (318 download)

DOWNLOAD NOW!

Book Synopsis Modelling Diesel Combustion by : P. A. Lakshminarayanan

Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer. This book was released on 2012-05-05 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.

Modelling Diesel Combustion

Author : P. A. Lakshminarayanan
Publisher : Springer
ISBN 13 : 9789048138845
Total Pages : 305 pages
Book Rating : 4.1/5 (388 download)

DOWNLOAD NOW!

Book Synopsis Modelling Diesel Combustion by : P. A. Lakshminarayanan

Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer. This book was released on 2010-03-29 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.

Engine Modeling and Simulation

Author : Avinash Kumar Agarwal
Publisher : Springer Nature
ISBN 13 : 9811686181
Total Pages : 368 pages
Book Rating : 4.8/5 (116 download)

DOWNLOAD NOW!

Book Synopsis Engine Modeling and Simulation by : Avinash Kumar Agarwal

Download or read book Engine Modeling and Simulation written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-16 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the simulation and modeling of internal combustion engines. The contents include various aspects of diesel and gasoline engine modeling and simulation such as spray, combustion, ignition, in-cylinder phenomena, emissions, exhaust heat recovery. It also explored engine models and analysis of cylinder bore piston stresses and temperature effects. This book includes recent literature and focuses on current modeling and simulation trends for internal combustion engines. Readers will gain knowledge about engine process simulation and modeling, helpful for the development of efficient and emission-free engines. A few chapters highlight the review of state-of-the-art models for spray, combustion, and emissions, focusing on the theory, models, and their applications from an engine point of view. This volume would be of interest to professionals, post-graduate students involved in alternative fuels, IC engines, engine modeling and simulation, and environmental research.

Introduction to Modeling and Control of Internal Combustion Engine Systems

Author : Lino Guzzella
Publisher : Springer Science & Business Media
ISBN 13 : 3662080036
Total Pages : 303 pages
Book Rating : 4.6/5 (62 download)

DOWNLOAD NOW!

Book Synopsis Introduction to Modeling and Control of Internal Combustion Engine Systems by : Lino Guzzella

Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.

Modeling Engine Spray and Combustion Processes

Author : Gunnar Stiesch
Publisher : Springer Science & Business Media
ISBN 13 : 3662087901
Total Pages : 293 pages
Book Rating : 4.6/5 (62 download)

DOWNLOAD NOW!

Book Synopsis Modeling Engine Spray and Combustion Processes by : Gunnar Stiesch

Download or read book Modeling Engine Spray and Combustion Processes written by Gunnar Stiesch and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of mathematical models to numerically describe the performance of internal combustion engines is of great significance in the development of new and improved engines. Today, such simulation models can already be viewed as standard tools, and their importance is likely to increase further as available com puter power is expected to increase and the predictive quality of the models is constantly enhanced. This book describes and discusses the most widely used mathematical models for in-cylinder spray and combustion processes, which are the most important subprocesses affecting engine fuel consumption and pollutant emissions. The relevant thermodynamic, fluid dynamic and chemical principles are summarized, and then the application of these principles to the in-cylinder processes is ex plained. Different modeling approaches for the each subprocesses are compared and discussed with respect to the governing model assumptions and simplifica tions. Conclusions are drawn as to which model approach is appropriate for a specific type of problem in the development process of an engine. Hence, this book may serve both as a graduate level textbook for combustion engineering stu dents and as a reference for professionals employed in the field of combustion en gine modeling. The research necessary for this book was carried out during my employment as a postdoctoral scientist at the Institute of Technical Combustion (ITV) at the Uni versity of Hannover, Germany and at the Engine Research Center (ERC) at the University of Wisconsin-Madison, USA.

Engine Modeling and Control

Author : Rolf Isermann
Publisher : Springer
ISBN 13 : 3642399347
Total Pages : 637 pages
Book Rating : 4.6/5 (423 download)

DOWNLOAD NOW!

Book Synopsis Engine Modeling and Control by : Rolf Isermann

Download or read book Engine Modeling and Control written by Rolf Isermann and published by Springer. This book was released on 2014-07-01 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demands for internal combustion engines with regard to fuel consumption, emissions and driveability lead to more actuators, sensors and complex control functions. A systematic implementation of the electronic control systems requires mathematical models from basic design through simulation to calibration. The book treats physically-based as well as models based experimentally on test benches for gasoline (spark ignition) and diesel (compression ignition) engines and uses them for the design of the different control functions. The main topics are: - Development steps for engine control - Stationary and dynamic experimental modeling - Physical models of intake, combustion, mechanical system, turbocharger, exhaust, cooling, lubrication, drive train - Engine control structures, hardware, software, actuators, sensors, fuel supply, injection system, camshaft - Engine control methods, static and dynamic feedforward and feedback control, calibration and optimization, HiL, RCP, control software development - Control of gasoline engines, control of air/fuel, ignition, knock, idle, coolant, adaptive control functions - Control of diesel engines, combustion models, air flow and exhaust recirculation control, combustion-pressure-based control (HCCI), optimization of feedforward and feedback control, smoke limitation and emission control This book is an introduction to electronic engine management with many practical examples, measurements and research results. It is aimed at advanced students of electrical, mechanical, mechatronic and control engineering and at practicing engineers in the field of combustion engine and automotive engineering.

Development of a Partially Premixed Combustion Model for a Diesel Engine Using Multiple Injection Strategies

Author : Rene Thygesen
Publisher : Logos Verlag Berlin GmbH
ISBN 13 : 3832530932
Total Pages : 157 pages
Book Rating : 4.8/5 (325 download)

DOWNLOAD NOW!

Book Synopsis Development of a Partially Premixed Combustion Model for a Diesel Engine Using Multiple Injection Strategies by : Rene Thygesen

Download or read book Development of a Partially Premixed Combustion Model for a Diesel Engine Using Multiple Injection Strategies written by Rene Thygesen and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to fulfil future emissions legislations, new combustion systems are to be investigated. One way of improving exhaust emissions is the application of multiple injection strategies and conventional or partially premixed combustion conditions to a Diesel engine. The application of numerical techniques as CFD supports and improves the quality of engine developments. Unfortunately, current spray and combustion models are not accurate enough to simulate multiple injection systems, being in this way a topic of research. The goal of this study was the development of a novel simulation method for the investigation of Diesel engines operated with multiple injection strategies and different combustion modes. The first part of this work focused in improving the spray modelling. The inform ation of 3D CFD simulations of the injector nozzle was introduced in the spray simulation as boundary conditions developing coupling subroutines for this issue. The atomisation modelling was also improved using validated presumed droplet size distributions. Moreover, to avoid the simulation of the injector nozzle for every investigated operating point, a novel interpolating tool was developed in order to create spray boundary conditions based on few 3D CFD simulations of the nozzle under certain initial and boundary conditions. The second part of this thesis dealt with the combustion modelling of Diesel engines. For this issue, a laminar flamelet approach called Representative Interactive Flamelet model (RIF) was selected and implemented. Afterwards, an extended combustion model based on RIF was developed in order to take into account multiple injection strategies. Finally, this new model was validated with a wide range of operating points: applying multiple injection strategies under conventional and partially premixed combustion conditions.

Combustion Engine Diagnosis

Author : Rolf Isermann
Publisher : Springer
ISBN 13 : 3662494671
Total Pages : 303 pages
Book Rating : 4.6/5 (624 download)

DOWNLOAD NOW!

Book Synopsis Combustion Engine Diagnosis by : Rolf Isermann

Download or read book Combustion Engine Diagnosis written by Rolf Isermann and published by Springer. This book was released on 2017-05-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers first a short introduction to advanced supervision, fault detection and diagnosis methods. It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel supply, fuel injection, combustion process, turbocharger, exhaust system and exhaust gas aftertreatment. Additionally, model-based fault diagnosis of electrical motors, electric, pneumatic and hydraulic actuators and fault-tolerant systems is treated. In general series production sensors are used. It includes abundant experimental results showing the detection and diagnosis quality of implemented faults. Written for automotive engineers in practice, it is also of interest to graduate students of mechanical and electrical engineering and computer science.

Development of a General Diesel Combustion Model in the Context of Large Eddy Simulation

Author : Bing Hu
Publisher :
ISBN 13 :
Total Pages : 140 pages
Book Rating : 4.:/5 (891 download)

DOWNLOAD NOW!

Book Synopsis Development of a General Diesel Combustion Model in the Context of Large Eddy Simulation by : Bing Hu

Download or read book Development of a General Diesel Combustion Model in the Context of Large Eddy Simulation written by Bing Hu and published by . This book was released on 2008 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Advanced Direct Injection Combustion Engine Technologies and Development

Author : H Zhao
Publisher : Elsevier
ISBN 13 : 1845697324
Total Pages : 312 pages
Book Rating : 4.8/5 (456 download)

DOWNLOAD NOW!

Book Synopsis Advanced Direct Injection Combustion Engine Technologies and Development by : H Zhao

Download or read book Advanced Direct Injection Combustion Engine Technologies and Development written by H Zhao and published by Elsevier. This book was released on 2014-01-23 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct injection enables precise control of the fuel/air mixture so that engines can be tuned for improved power and fuel economy, but ongoing research challenges remain in improving the technology for commercial applications. As fuel prices escalate DI engines are expected to gain in popularity for automotive applications. This important book, in two volumes, reviews the science and technology of different types of DI combustion engines and their fuels. Volume 1 deals with direct injection gasoline and CNG engines, including history and essential principles, approaches to improved fuel economy, design, optimisation, optical techniques and their applications. Reviews key technologies for enhancing direct injection (DI) gasoline engines Examines approaches to improved fuel economy and lower emissions Discusses DI compressed natural gas (CNG) engines and biofuels

Diesel Ignition and Combustion Modeling with Comparisons to In-cylinder Flame Imaging

Author : Song-Charng Kong
Publisher :
ISBN 13 :
Total Pages : 350 pages
Book Rating : 4.:/5 (89 download)

DOWNLOAD NOW!

Book Synopsis Diesel Ignition and Combustion Modeling with Comparisons to In-cylinder Flame Imaging by : Song-Charng Kong

Download or read book Diesel Ignition and Combustion Modeling with Comparisons to In-cylinder Flame Imaging written by Song-Charng Kong and published by . This book was released on 1994 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Combustion Modeling for Diesel Engine Control Design

Author : Christian Felsch
Publisher :
ISBN 13 : 9783832285456
Total Pages : 100 pages
Book Rating : 4.2/5 (854 download)

DOWNLOAD NOW!

Book Synopsis Combustion Modeling for Diesel Engine Control Design by : Christian Felsch

Download or read book Combustion Modeling for Diesel Engine Control Design written by Christian Felsch and published by . This book was released on 2009 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Combustion Modeling in Reciprocating Engines

Author : James N. Mattair
Publisher : Springer
ISBN 13 :
Total Pages : 624 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Combustion Modeling in Reciprocating Engines by : James N. Mattair

Download or read book Combustion Modeling in Reciprocating Engines written by James N. Mattair and published by Springer. This book was released on 1980 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Diesel Engine Transient Operation

Author : Constantine D. Rakopoulos
Publisher : Springer Science & Business Media
ISBN 13 : 1848823754
Total Pages : 408 pages
Book Rating : 4.8/5 (488 download)

DOWNLOAD NOW!

Book Synopsis Diesel Engine Transient Operation by : Constantine D. Rakopoulos

Download or read book Diesel Engine Transient Operation written by Constantine D. Rakopoulos and published by Springer Science & Business Media. This book was released on 2009-03-10 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.

Diesel Combustion Processes

Author : Society of Automotive Engineers
Publisher :
ISBN 13 : 9781560913566
Total Pages : 175 pages
Book Rating : 4.9/5 (135 download)

DOWNLOAD NOW!

Book Synopsis Diesel Combustion Processes by : Society of Automotive Engineers

Download or read book Diesel Combustion Processes written by Society of Automotive Engineers and published by . This book was released on 1993 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Combustion Engines Development

Author : Günter P. Merker
Publisher : Springer Science & Business Media
ISBN 13 : 3642140947
Total Pages : 660 pages
Book Rating : 4.6/5 (421 download)

DOWNLOAD NOW!

Book Synopsis Combustion Engines Development by : Günter P. Merker

Download or read book Combustion Engines Development written by Günter P. Merker and published by Springer Science & Business Media. This book was released on 2011-09-24 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engines Development nowadays is based on simulation, not only of the transient reaction of vehicles or of the complete driveshaft, but also of the highly unsteady processes in the carburation process and the combustion chamber of an engine. Different physical and chemical approaches are described to show the potentials and limits of the models used for simulation.